Also use neo-go private key wrapper where possible, as it
already has methods for (un)marshaling.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Config `NodeInfo` should be used for bootstrap. Separete local node info and
netmap one. Return configured `NodeInfo` if structure from netmap is
missing.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In testnet and neofs-dev-env we use timers with these
settings and they are looking good. So it makes sense
to make them default.
Storage node now can't configure bootstrap healthcheck
length and can't disable it. Inner ring default values
now adopt these changes too.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
New config package in storage node does not use
application prefix from misc package. Therefore
inner ring node can define prefix in local scope.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Container commands in NeoFS CLI can use signed session token
to create, delete container and change extended ACL table.
This token should be signed the same way we sign bearer tokens.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
containerSessionToken() actually parses any session token.
We can reuse this function to resign session token when it
takes filepath as an argument, instead of public variable.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
In previous implementation `Config.Sub` method could lead to the violation
of the internal `path` slice because of `append`. This has been observed on
deeply nested subsections.
Fix `Config.Sub` to copy internal slice in order to prevent violations.
Cover problem case in test config files and unit test.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Dedicated type `LoggerSection` turned out to be redundant since it doesn't
do a hidden logic and just uses `config.Config` API.
Remove `LoggerSection` type and implement `Level` which do the same.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation ENV values were read only if config filepath is
specified. From now ENVs are always read to `Config`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In some cases viper doesn't interpret `section.value` as a subsection with
`section` name, but value is value still can be accessed through full
pathname.
Fix `Config.Sub` method implementation in order to always interpret
configuration like described above as a subsection. From now method never
returns nil, therefore an additional check has been removed from the `Value`
method.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Create `logger` sub-package of `config` package. Implement `LoggerSection`
type of logger sub-section. Add `Level` method to read logger level config
value. Default level is `info`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Create `config` package nearby storage node application. Implement `Config`
as a wrapper over `viper.Viper` that provides the minimum functionality
required by the application.
The constructor allows you to read the config from the file. Methods are
provided for reading subsections and values from the config tree. Helper
functions are implemented to cast a value to native Go types.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Container sessions allow to perform some operations on behalf of another
user. There is a need to to attach session tokens to commands.
Add `session` flag to `put`, `delete` and `set-eacl` commands from
`container` section. It should be a path to the JSON-encoded session token.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement function `fatalOnErrDetails` similar to `fatalOnErr` but accepting
string details that are written to log output. Use the function everywhere
in application code without wrapping in an if-else statement.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation wrapper over the Container contract's client
returned the signature of the eACL table in addition to itself. After recent
changes in API Go lib table carries its signature. Thus, it is redundant to
return the table signature separately.
Make `Wrapper.GetEACL` method to return only `eacl.Table` with error.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make `Get` method of the wrapper over Container contract's client to
accept binary container ID. Create `Get` function similar to the previous
`Get` variation. Use this function in Container service server in the place
where `Get` method was used.
Additionally implement `AsContainerSource` function which allows
to simply compose container Source interface from the wrapper.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Wrap functions at `pkg/errors` return nil if error argument
was nil. fmt.Errorf always returns error so we need to add
missing error checks to the code.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
When user creates a container using neofs-cli, he can set a pre-defined ACL.
Current keywords are confusing: for example, `public` really means that
everyone can write to the container, while the expectation is just public
visibility. Perform the following renames for a better understanding of the
purpose:
* `readonly` -> `public-read`;
* `public` -> `public-read-write`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Define constants for `public`/`private`/`readonly` keywords of predefined
basic ACL values. Use constants instead of repeating string literals.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
To enable TLS support we can't operate with IP addresses directly.
Certificates are issued with host names so it is required to
pass them into RPC client. DNS resolving should be done by transport
layer and not be a part of node. Therefore `IPAddrString` usage is
removed from code.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Currently main chain's client is unused, therefore, it is not advisable to
require mandatory setting of addresses.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
If default smart contract addresses are valid 20 byte strings, then omitting
the values in configuration will not be tracked at startup.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
From now non-relay node always sends re-bootstrap transaction every 2 epochs
starting from the boot-up epoch.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Application can be shut down often, it is undesirable to send status changes
on a transaction every time. Control API should be used before shutdown for
this purpose.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make work scope and expansion rate the app-side constants since Policer
independently regulates the amount of work performed.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There is no need to use synchronous execution of notification handlers. Also
there is no understanding of how to assess the need to change the size of
the pools.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Calls to contracts by storage nodes do not lead to the accumulation of
multisignatures in the contract memory, so the call cost can always be
accurately calculated in advance without additional fee.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Replace dial timeout of API client connection from `grpc` section to
`apiclient` since this value is semantically decoupled from the transport
protocol.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Although the default values for configurable addresses are empty strings,
explicitly specifying the default values allows you to know about all
possible configurations.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Rename `util/profiler` package to `httputil` and refactor it:
* simplify utility HTTP server;
* make more generic server's parameters in order to remove `viper.Viper`
dependency;
* use single constructor for creating the pprof and prometheus servers;
* replace `enabled` config value with empty-check of the network address.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Establish client connection with main chain node on storage node startup.
Client is configured simlarly to morph client.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Writing application version in each log message seems pretty redundant.
Remove global `app_version` field from Node/IR loggers. Write version, build
time and debug flag once on start.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Writing application name in each log message seems pretty redundant.
Remove no longer used `misc.NodeName` and `misc.InnerRingName` constants.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Replace `viper.Viper` parameter with `Prm` structure. Currently only logging
level can be parameterized through string setter.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Remove setting of `app_name` and `app_version` fields in `NewLogger`
constructor. Set these fields in Node and IR application in already
constructed log and remove them from viper .
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
