Memory forest is here to check the correctness of boltdb optimized
implementation. Let's keep it simple.
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
If operation with WC are _fast enough_ (e.g. `Init` failed and `Close` is
called immediately) there is a race and a deadlock that do not allow finish
(and start, in fact) an initialization routine because of taken `modeMtx`
and also do not allow finish `Close` call because of awaiting initialization
finish. So do stop initialization _before_ any mutex is taken.
Signed-off-by: Pavel Karpy <p.karpy@yadro.com>
Do not use WC's internals in the initialization routines without mode
protection. WC should be able to change its mode even if the initialization
is not finished yet.
Signed-off-by: Pavel Karpy <p.karpy@yadro.com>
`blobovniczatree` takes a really long time to prefill, because each
batch takes at least 10ms, so for 10k iterations we have at least 100s of
prefill.
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
I tried to add 4 more tests and suddenly, it became harder to navigate in
code. Move directory creation in a common function.
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
RemoveDuplicates() removes all duplicate object copies stored on
multiple shards. All shards are processed and the command tries to leave
a copy on the best shard according to HRW.
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
All operations must ensure the shard is not in a degraded mode.
Write operations must also ensure the shard is not in a read-only mode.
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
A directory is read and files are saved to a local variable. The iteration
over such files may lead to a non-existing files reading due to a normal SN
operation cycle and, therefore, may lead to a returning the OS error to a
caller. Skip just removed (or lost) files as the golang std library does in
similar situations:
5f1a0320b9/src/os/dir_unix.go (L128-L133).
Signed-off-by: Pavel Karpy <p.karpy@yadro.com>
Initially it was there to check whether an update is being initiated by
a proper node. It is now obsolete for 2 reasons:
1. Background synchronization fetches all operations from a single node.
2. There are a lot more problems with trust in the tree service, it is
only used in controlled environments.
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
GC deletes expired locks and objects sequentially. Expired locks and
objects are now being deleted concurrently in batches. Added a config
parameter that controls the number of concurrent workers and batch size.
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
It will prevent test fails with `-race` flag on components that have
background processes and make some actions on test framework.
Signed-off-by: Pavel Karpy <p.karpy@yadro.com>
In case we have many small objects in the write-cache, `indices` should
not be reused between iterations.
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
Previously, node could get an "infinite" small object: it could be expired
and thus could not be flushed (update its storage ID) to metabase => could
not be marked as flushed => node never removes such object and repeat all
the cycle one more time. If object exists and is not marked with GC (meta
returns `ErrObjectIsExpired`, not `ObjectNotFound` and not
`ObjectAlreadyRemoved`), its ID is safe to update _in the same_ bbolt
transaction.
Signed-off-by: Pavel Karpy <p.karpy@yadro.com>
LRU `Peek`/`Contains` take LRU mutex _inside_ of a `View` transaction.
`View` transaction itself takes `mmapLock` [1], which is lifted after tx
finishes (in `tx.Commit()` -> `tx.close()` -> `tx.db.removeTx`)
When we evict items from LRU cache mutex order is different:
first we take LRU mutex and then execute `Batch` which _does_ take
`mmapLock` in case we need to remap. Thus the deadlock.
[1] 8f4a7e1f92/db.go (L708)
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
To achieve high performance we must choose proper values for both
batch size and delay. For user operations we want to set low delay.
However it would prevent tree synchronization operations to form big
enough batches. For these operations, batching gives the most benefit
not only in terms of on-CPU execution cost, but also by speeding up
transaction persist (`fsync`).
In this commit we try merging batches that are already
_triggered_, but not yet _started to execute_. This way we can still
query batches for execution after the provided delay while also allowing
multiple formed batches to execute faster.
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
"Object is expired" means that object is presented in `meta` but it is not
`ObjectNotFound` error. Previous implementation made `shard` search for an
object without `meta` which was an error.
Signed-off-by: Pavel Karpy <p.karpy@yadro.com>
```
name old time/op new time/op delta
_addressFromString-8 1.25µs ±30% 1.02µs ± 6% -18.49% (p=0.000 n=9+9)
name old alloc/op new alloc/op delta
_addressFromString-8 352B ± 0% 256B ± 0% -27.27% (p=0.000 n=9+10)
name old allocs/op new allocs/op delta
_addressFromString-8 6.00 ± 0% 4.00 ± 0% -33.33% (p=0.000
n=10+10)
```
Also, assure compiler that `s` doesn't escape:
Before this commit:
```
./fstree.go:74:24: leaking param: s
./fstree.go:90:6: moved to heap: addr
```
After this commit:
```
./fstree.go:74:24: s does not escape
```
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
Currently we track based on `PayloadSize`, because it is already stored
in the metabase and it is easier to calculate without slowing down the
whole system.
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
Signed-off-by: Pavel Karpy <p.karpy@yadro.com>
Currently the only way to tell whether `evacuate/set-mode` is finished
is to set a very big timeout and _hope_ that the operation will finish.
In this commit we add INFO logs for such operations which should
simplify the life of an administrator.
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
1. Reduce allocations inside transactions.
2. Do not encode container ID to string: it allocates a lot and takes more
space.
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
Under high load we are limited by the _amount_ of keys we need to update
in a single transaction. In this commit we try storing all state
with a single key.
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
In the previous implementation any non-nil error that preceded object
fetching from blobstor led to iterating over every storage (in other words,
no storage ID information was taken into account). Now storage ID is
skipped only if metabase (storage ID source) returns any error.
Signed-off-by: Pavel Karpy <p.karpy@yadro.com>
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
It should be similar to a `TreeAddByPath`. `applyOperation` is used for
`Apply` when the operation can be inserted in the middle of a log.
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
Under load changing shard mode can lead to it being removed from the
list during some other PUT.
```
Dec 28 07:01:26 az neofs-node[364505]: panic: runtime error: invalid memory address or nil pointer dereference
Dec 28 07:01:26 az neofs-node[364505]: [signal SIGSEGV: segmentation violation code=0x1 addr=0x20 pc=0xc9fbb1]
Dec 28 07:01:26 az neofs-node[364505]: goroutine 11791912 [running]:
Dec 28 07:01:26 az neofs-node[364505]: github.com/nspcc-dev/neofs-node/pkg/local_object_storage/engine.(*StorageEngine).putToShard(0xc000435490, {0xc0003f7a28?, 0xc0001192c0?}, 0x2, {0x0, 0x>
Dec 28 07:01:26 az neofs-node[364505]: github.com/nspcc-dev/neofs-node/pkg/local_object_storage/engine/put.go:91 +0x1b1
Dec 28 07:01:26 az neofs-node[364505]: github.com/nspcc-dev/neofs-node/pkg/local_object_storage/engine.(*StorageEngine).put.func1(0xc000435490?, {0xc0003f7a28?, 0xc0001192c0?})
Dec 28 07:01:26 az neofs-node[364505]: github.com/nspcc-dev/neofs-node/pkg/local_object_storage/engine/put.go:71 +0x19c
Dec 28 07:01:26 az neofs-node[364505]: github.com/nspcc-dev/neofs-node/pkg/local_object_storage/engine.(*StorageEngine).iterateOverSortedShards(0x1?, {{0x62, 0x23, 0xfe, 0x60, 0x67, 0xd5, 0x>
Dec 28 07:01:26 az neofs-node[364505]: github.com/nspcc-dev/neofs-node/pkg/local_object_storage/engine/shards.go:225 +0xc8
Dec 28 07:01:26 az neofs-node[364505]: github.com/nspcc-dev/neofs-node/pkg/local_object_storage/engine.(*StorageEngine).put(0xc000435490, {0x1?})
Dec 28 07:01:26 az neofs-node[364505]: github.com/nspcc-dev/neofs-node/pkg/local_object_storage/engine/put.go:66 +0x2a9
Dec 28 07:01:26 az neofs-node[364505]: github.com/nspcc-dev/neofs-node/pkg/local_object_storage/engine.(*StorageEngine).Put.func1()
Dec 28 07:01:26 az neofs-node[364505]: github.com/nspcc-dev/neofs-node/pkg/local_object_storage/engine/put.go:43 +0x2a
Dec 28 07:01:26 az neofs-node[364505]: github.com/nspcc-dev/neofs-node/pkg/local_object_storage/engine.(*StorageEngine).execIfNotBlocked(0x8?, 0x38?)
Dec 28 07:01:26 az neofs-node[364505]: github.com/nspcc-dev/neofs-node/pkg/local_object_storage/engine/control.go:147 +0xcf
Dec 28 07:01:26 az neofs-node[364505]: github.com/nspcc-dev/neofs-node/pkg/local_object_storage/engine.(*StorageEngine).Put(0xc4df775a80?, {0x0?})
Dec 28 07:01:26 az neofs-node[364505]: github.com/nspcc-dev/neofs-node/pkg/local_object_storage/engine/put.go:42 +0x65
Dec 28 07:01:26 az neofs-node[364505]: github.com/nspcc-dev/neofs-node/pkg/local_object_storage/engine.Put(0xc06d928b80?, 0xc06b1b8dc8?)
Dec 28 07:01:26 az neofs-node[364505]: github.com/nspcc-dev/neofs-node/pkg/local_object_storage/engine/put.go:158 +0x19
Dec 28 07:01:26 az neofs-node[364505]: main.engineWithoutNotifications.Put({0x20301b?}, 0x20301b?)
```
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
Because synchronization _most likely_ will have apply already existing
operations, it is much faster to check their presence in a read
transaction. However, always doing this will degrade the perfomance
for normal `Apply`. And, let's be honest, it is already not good.
Thus we add a separate parameter which specifies whether this logic is
enabled.
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
Both `meta` and `write-cache` are expected to have a fast underlying disk,
so it does not seem like an optimisation. Moreover, `write-cache`'s `Head`
is a `Get` with payload cutting, it _must_ use more memory for no reason
(`meta` was created for such requests). Also, `write-cache` does not allow
performing any "meta" relations checks (such as locking, tombstoning).
Signed-off-by: Pavel Karpy <p.karpy@yadro.com>
Node children are not sorted and could occur in any order.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
Includes:
1. mode change read lock operation in every exported method that r/w the
underlying database;
2. returning `ErrDegradedMode` logical error if any exported method is
called in degraded (without a metabase) mode.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Includes extending listing methods in the Storage Engine with object types.
It allows tuning replication/policer algorithms: container nodes do
not remove `LOCK` objects as redundant and try to fulfill `LOCK` placement
on the ohter container nodes.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
It allows keeping all the locked objects safe after metabase
resynchronization. Currently, all `LOCK` objects are broadcast to all nodes
in a container, it guarantees `LOCK` object presence in a regular situation.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
It was needed before we started to flush during transition to
`degraded` mode. Now it is confusing.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
It is not an error: removing virtual object is expected and should be just
skipped. Getting a virtual object with `raw` flag is considered as an
impossible action, all the virtual objects removals will be handled via
their children's removals implicitly.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Currently there is a possibility for modifying operations to fail
because of I/O errors and a new tree to be created on another shard.
This commit adds existence check for modifying operations.
Read operations remain as they are, not to slow things.
`TreeDrop` is an exception, because this is a tree removal and trying
multiple shards is not an unwanted behaviour.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
By default writecache puts the whole object to update storage ID.
This logic comes from the times when we needed to put objects
in the metabase by the writecache itself. Now this is done by the
blobstor at unmarshaling objects during flush only to update storage ID
is an overkill.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
All logic errors are wrapped in `logicerr.Logical` type and do not
affect shard error counter.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
In previous implementation `Shard.Delete` logged writecache's removal
failures in `error` level. There is a need to decrease severity of these
log records since they aren't critical and don't require individual
review.
Change level of the message to `info`.
Signed-off-by: Leonard Lyubich <ctulhurider@gmail.com>
From the `Bucket.ForEach` doc:
```
The provided function must not modify the bucket; this will result in undefined behavior.
```
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
After the refactor there are new storage characteristics: a type and
a general storage id (that could be stringified).
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Iterate over every shard and search for the container's trees. Final result
is a concatenation of shards' results. It is considered that one fixed tree
is placed on one fixed shard but the different trees of a fixed container
could be placed on different shards.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
In the 2nd version, there was a database format change: buckets have changed
their keys, so it becomes impossible to check the version in the 1 -> 2+
migrations because of different buckets that store info about the version.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
If shard ID is stored in metabase (it is not the first time boot), read it,
set it, use it (not a generated one) in the metrics writer.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Make it store its internal `zap.Logger`'s level. Also, make all the
components to accept internal `logger.Logger` instead of `zap.Logger`; it
will simplify future refactor.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Currently, when removing shard special care must be taken with respect
to shard numbering. `mode: disabled` allows to leave shard configuration
in place while also ignoring it during initialization. This makes
disk replacement much more convenient.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
Degraded mode allows us to operate without an SSD,
thus writecache should be unavailable in this mode.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
Add a common error for this case because it is not an error
which should increase error counter. Single error simplifies checks on
the call-site.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
Negative values have no sense. On the other hand it differs from the
blobovnicza's configuration and prevents unification.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Allow user to initiate flushing objects from a writecache.
We need this in 2 cases:
1. During writecache storage schema update, it should be flushed with
the old version of node and started clean with a new one.
2. During SSD replacement, to avoid data loss.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
Use a simple loop at the callsite. This way we remove as much as we can.
Also, `Delete` metrics is more meaningful now.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
- Meta now supports (and requires) inc/dec labeled counters
- The new logic counter is incremented on `Put` operations and is
decremented on `Inhume` and `Delete` operations that are performed on
_stored_ objects only
- Allow force counters sync. "Force" mode should be used on metabase resync
and should not be used on a regular meta start
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Re-configuration of Blobovnicza's object size limit must not affect
already stored objects. In previous implementation `Blobovnicza` didn't
see objects stored in buckets which became too big after size limit
re-configuration. For example, lets consider 1st configuration with 64KB
size limit for stored objects. Lets assume that we stored object of 64KB
size, and re-configured `Blobovnicza` with 32KB limit. After reboot
object should be still available, but actually it isn't. This is caused
by `Get` operation algorithm which iterates over configured size ranges
only, and doesn't process any other existing size bucket. By the way,
increasing of the object size limit didn't lead to the problem even in
previous implementation.
Make `Blobovnicza.Get` method to iterate over all size buckets
regardless of current configuration. This covers the described scenario.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Set flush mark in the inside the flush worker because writing to the blobstor
can fail. Because each evicted object must be deleted, it is reasonable
to do this in the evict callback.
The evict callback is protected by LRU mutex and thus potentially interferes
with `Get` and `Iterate` methods. This problem will be addressed in the
future.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
Maintain an invariant that any blobovnicza is present either
in `opened` or in `active` map. Otherwise, the logic becomes too
complicate because it is not obvious when we should close the blobovnicza.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
This check should occur on the shard level, but because
blobstor components expose `Open(readOnly bool)` interface,
it is reasonable to expect an error here.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
If the file doesn't exist, return `apistatus.ObjectNotFound`.
First check is still there as a shortcut.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
This tests check that each blobstor component behaves similarly when
same methods are being used. It is intended to serve as a specification
for all future components.
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
