Storage drivers may be able to take advantage of the hint to start
their walk more efficiently.
For S3: The API takes a start-after parameter. Registries with many
repositories can drastically reduce calls to s3 by telling s3 to only
list results lexographically after the last parameter.
For the fallback: We can start deeper in the tree and avoid statting
the files and directories before the hint in a walk. For a filesystem
this improves performance a little, but many of the API based drivers
are currently treated like a filesystem, so this drastically improves
the performance of GCP and Azure blob.
Signed-off-by: James Hewitt <james.hewitt@uk.ibm.com>
Other storage drivers will only return children and below, s3 should do
the same. The only reason it was returning was because of the addition
of a / to ensure we treat the from as a directory.
Signed-off-by: James Hewitt <james.hewitt@uk.ibm.com>
Microsoft has updated the golang Azure SDK significantly. Update the
azure storage driver to use the new SDK. Add support for client
secret and MSI authentication schemes in addition to shared key
authentication.
Implement rootDirectory support for the azure storage driver to mirror
the S3 driver.
Signed-off-by: Kirat Singh <kirat.singh@beacon.io>
Co-authored-by: Cory Snider <corhere@gmail.com>
This is an edge case when we are trying to upload an empty chunk of data using
a MultiPart upload. As a result we are trying to complete the MultipartUpload
with an empty slice of `completedUploadedParts` which will always lead to 400
being returned from S3 See: https://docs.aws.amazon.com/sdk-for-go/api/service/s3/#CompletedMultipartUpload
Solution: we upload an empty i.e. 0 byte part as a single part and then append it
to the completedUploadedParts slice used to complete the Multipart upload.
Signed-off-by: Milos Gajdos <milosthegajdos@gmail.com>
The loop that iterates over paginated lists of S3 multipart upload parts
appears to be using the wrong variable in its loop condition. Nothing
inside the loop affects the value of `resp.IsTruncated`, so this loop
will either be wrongly skipped or loop forever.
It looks like this is a regression caused by commit
7736319f2e. The return value of
`ListMultipartUploads` used to be assigned to a variable named `resp`,
but it was renamed to `partsList` without updating the for loop
condition.
I believe this is causing an error we're seeing with large layer uploads
at commit time:
upload resumed at wrong offset: 5242880000 != 5815706782
Missing parts of the multipart S3 upload would cause an incorrect size
calculation in `newWriter`.
Signed-off-by: Aaron Lehmann <alehmann@netflix.com>
Previously we used a custom Transport in order to modify the user agent header.
This prevented the AWS SDK from being able to customize SSL and other client TLS
parameters since it could not understand the Transport type.
Instead we can simply use the SDK function MakeAddToUserAgentFreeFormHandler to
customize the UserAgent if necessary and leave all the TLS configuration to the
AWS SDK.
The only exception being SkipVerify which we have to handle, but we can set it
onto the standard http.Transport which does not interfere with the SDKs ability
to set other options.
Signed-off-by: Kirat Singh <kirat.singh@gmail.com>
gofumpt (https://github.com/mvdan/gofumpt) provides a supserset of `gofmt` / `go fmt`,
and addresses various formatting issues that linters may be checking for.
We can consider enabling the `gofumpt` linter to verify the formatting in CI, although
not every developer may have it installed, so for now this runs it once to get formatting
in shape.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Instead of first collecting all keys and then batch deleting them,
we will do the incremental delete _online_ per max allowed batch.
Doing this prevents frequent allocations for large S3 keyspaces
and OOM-kills that might happen as a result of those.
This commit introduces storagedriver.Errors type that allows to return
multierrors as a single error from any storage driver implementation.
Signed-off-by: Milos Gajdos <milosthegajdos@gmail.com>
If s3accelerate is set to true then we turn on S3 Transfer
Acceleration via the AWS SDK. It defaults to false since this is an
opt-in feature on the S3 bucket.
Signed-off-by: Kirat Singh <kirat.singh@wsq.io>
Signed-off-by: Simone Locci <simonelocci88@gmail.com>
Allow the storage driver to optionally use AWS SDK's dualstack mode.
This allows the registry to communicate with S3 in IPv6 environments.
Signed-off-by: Adam Kaplan <adam.kaplan@redhat.com>
Optimized S3 Walk impl by no longer listing files recursively. Overall gives a huge performance increase both in terms of runtime and S3 calls (up to ~500x).
Fixed a bug in WalkFallback where ErrSkipDir for was not handled as documented for non-directory.
Signed-off-by: Collin Shoop <cshoop@digitalocean.com>
Delete was not working when the subpath immediately followed the given path started with an ascii lower than "/" such as dash "-" and underscore "_" and requests no files to be deleted.
(cherry picked from commit 5d8fa0ce94b68cce70237805db92cdd8d40de282)
Signed-off-by: Collin Shoop <cshoop@digitalocean.com>
Go 1.13 and up enforce import paths to be versioned if a project
contains a go.mod and has released v2 or up.
The current v2.x branches (and releases) do not yet have a go.mod,
and therefore are still allowed to be imported with a non-versioned
import path (go modules add a `+incompatible` annotation in that case).
However, now that this project has a `go.mod` file, incompatible
import paths will not be accepted by go modules, and attempting
to use code from this repository will fail.
This patch uses `v3` for the import-paths (not `v2`), because changing
import paths itself is a breaking change, which means that the
next release should increment the "major" version to comply with
SemVer (as go modules dictate).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
When a given prefix is empty and we attempt to list its content AWS
returns that the prefix contains one object with key defined as the
prefix with an extra "/" at the end.
e.g.
If we call ListObjects() passing to it an existing but empty prefix,
say "my/empty/prefix", AWS will return that "my/empty/prefix/" is an
object inside "my/empty/prefix" (ListObjectsOutput.Contents).
This extra "/" causes the upload purging process to panic. On normal
circunstances we never find empty prefixes on S3 but users may touch
it.
Signed-off-by: Ricardo Maraschini <rmarasch@redhat.com>
Instead of constructing the list of credential providers manually, if we
use the default list we can take advantage of the AWS SDK checking the
environment and returning either the EC2RoleProvider or the generic HTTP
credentials provider, configured to use the ECS credentials endpoint.
Also, use the `defaults.Config()` function instead of `aws.NewConfig()`,
as this results in an initialised HTTP client which prevents a fatal
error when retrieving credentials from the ECS credentials endpoint.
Fixes#2960
Signed-off-by: Andrew Bulford <andrew.bulford@redmatter.com>
Radosgw does not support S3 `GET Bucket` API v2 API but v1.
This API has backward compatibility, so most of this API is working
correctly but we can not get `KeyCount` in v1 API and which is only
for v2 API.
Signed-off-by: Eohyung Lee <liquidnuker@gmail.com>
This changes the Walk Method used for catalog enumeration. Just to show
how much an effect this has on our s3 storage:
Original:
List calls: 6839
real 3m16.636s
user 0m0.000s
sys 0m0.016s
New:
ListObjectsV2 Calls: 1805
real 0m49.970s
user 0m0.008s
sys 0m0.000s
This is because it no longer performs a list and stat per item, and instead
is able to use the metadata gained from the list as a replacement to stat.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Move the Walk types into registry/storage/driver, and add a Walk method to each
storage driver. Although this is yet another API to implement, there is a fall
back implementation that relies on List and Stat. For some filesystems this is
very slow.
Also, this WalkDir Method conforms better do a traditional WalkDir (a la filepath).
This change is in preparation for refactoring.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Back in the before time, the best practices surrounding usage of Context
weren't quite worked out. We defined our own type to make usage easier.
As this packaged was used elsewhere, it make it more and more
challenging to integrate with the forked `Context` type. Now that it is
available in the standard library, we can just use that one directly.
To make usage more consistent, we now use `dcontext` when referring to
the distribution context package.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
