s3tests: fix post tests

Signed-off-by: Yehuda Sadeh <yehuda@inktank.com>

.gitignore

@@ -10,6 +10,5 @@
 
 /*.egg-info
 /virtualenv
-/venv
 
 config.yaml

README.rst

@@ -2,101 +2,90 @@
  S3 compatibility tests
 ========================
 
-This is a set of unofficial Amazon AWS S3 compatibility
-tests, that can be useful to people implementing software
-that exposes an S3-like API. The tests use the Boto2 and Boto3 libraries.
+This is a set of completely unofficial Amazon AWS S3 compatibility
+tests, that will hopefully be useful to people implementing software
+that exposes an S3-like API.
 
-The tests use the Tox tool. To get started, ensure you have the ``tox``
-software installed; e.g. on Debian/Ubuntu::
+The tests only cover the REST interface.
 
-	sudo apt-get install tox
+TODO: test direct HTTP downloads, like a web browser would do.
+
+The tests use the Boto library, so any e.g. HTTP-level differences
+that Boto papers over, the tests will not be able to discover. Raw
+HTTP tests may be added later.
+
+The tests use the Nose test framework. To get started, ensure you have
+the ``virtualenv`` software installed; e.g. on Debian/Ubuntu::
+
+	sudo apt-get install python-virtualenv
+
+and then run::
+
+	./bootstrap
 
 You will need to create a configuration file with the location of the
-service and two different credentials. A sample configuration file named
-``s3tests.conf.SAMPLE`` has been provided in this repo. This file can be
-used to run the s3 tests on a Ceph cluster started with vstart.
+service and two different credentials, something like this::
 
-Once you have that file copied and edited, you can run the tests with::
+	[DEFAULT]
+	## this section is just used as default for all the "s3 *"
+        ## sections, you can place these variables also directly there
 
-	S3TEST_CONF=your.conf tox
+	## replace with e.g. "localhost" to run against local software
+	host = s3.amazonaws.com
 
-You can specify which directory of tests to run::
+	## uncomment the port to use something other than 80
+	# port = 8080
 
-	S3TEST_CONF=your.conf tox -- s3tests_boto3/functional
+	## say "no" to disable TLS
+	is_secure = yes
 
-You can specify which file of tests to run::
+	[fixtures]
+	## all the buckets created will start with this prefix;
+	## {random} will be filled with random characters to pad
+	## the prefix to 30 characters long, and avoid collisions
+	bucket prefix = YOURNAMEHERE-{random}-
 
-	S3TEST_CONF=your.conf tox s3tests_boto3/functional/test_s3.py
+	[s3 main]
+	## the tests assume two accounts are defined, "main" and "alt".
 
-You can specify which test to run::
+	## user_id is a 64-character hexstring
+	user_id = 0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef
 
-	S3TEST_CONF=your.conf tox s3tests_boto3/functional/test_s3.py::test_bucket_list_empty
+	## display name typically looks more like a unix login, "jdoe" etc
+	display_name = youruseridhere
+
+	## replace these with your access keys
+	access_key = ABCDEFGHIJKLMNOPQRST
+	secret_key = abcdefghijklmnopqrstuvwxyzabcdefghijklmn
+
+	[s3 alt]
+	## another user account, used for ACL-related tests
+	user_id = 56789abcdef0123456789abcdef0123456789abcdef0123456789abcdef01234
+	display_name = john.doe
+	## the "alt" user needs to have email set, too
+	email = john.doe@example.com
+	access_key = NOPQRSTUVWXYZABCDEFG
+	secret_key = nopqrstuvwxyzabcdefghijklmnabcdefghijklm
+
+Once you have that, you can run the tests with::
+
+	S3TEST_CONF=your.conf ./virtualenv/bin/nosetests
+
+You can specify what test(s) to run::
+
+	S3TEST_CONF=your.conf ./virtualenv/bin/nosetests s3tests.functional.test_s3:test_object_acl_grant_public_read
 
 Some tests have attributes set based on their current reliability and
 things like AWS not enforcing their spec stricly. You can filter tests
 based on their attributes::
 
-	S3TEST_CONF=aws.conf tox -- -m 'not fails_on_aws'
+	S3TEST_CONF=aws.conf ./virtualenv/bin/nosetests -a '!fails_on_aws'
 
-Most of the tests have both Boto3 and Boto2 versions. Tests written in
-Boto2 are in the ``s3tests`` directory. Tests written in Boto3 are
-located in the ``s3test_boto3`` directory.
 
-You can run only the boto3 tests with::
+TODO
+====
 
-	S3TEST_CONF=your.conf tox -- s3tests_boto3/functional
-
-========================
- STS compatibility tests
-========================
-
-This section contains some basic tests for the AssumeRole, GetSessionToken and AssumeRoleWithWebIdentity API's. The test file is located under ``s3tests_boto3/functional``.
-
-To run the STS tests, the vstart cluster should be started with the following parameter (in addition to any parameters already used with it)::
-
-        vstart.sh -o rgw_sts_key=abcdefghijklmnop -o rgw_s3_auth_use_sts=true
-
-Note that the ``rgw_sts_key`` can be set to anything that is 128 bits in length.
-After the cluster is up the following command should be executed::
-
-      radosgw-admin caps add --tenant=testx --uid="9876543210abcdef0123456789abcdef0123456789abcdef0123456789abcdef" --caps="roles=*"
-
-You can run only the sts tests (all the three API's) with::
-
-        S3TEST_CONF=your.conf tox s3tests_boto3/functional/test_sts.py
-
-You can filter tests based on the attributes. There is a attribute named ``test_of_sts`` to run AssumeRole and GetSessionToken tests and ``webidentity_test`` to run the AssumeRoleWithWebIdentity tests. If you want to execute only ``test_of_sts`` tests you can apply that filter as below::
-
-        S3TEST_CONF=your.conf tox -- -m test_of_sts s3tests_boto3/functional/test_sts.py
-
-For running ``webidentity_test`` you'll need have Keycloak running.
-
-In order to run any STS test you'll need to add "iam" section to the config file. For further reference on how your config file should look check ``s3tests.conf.SAMPLE``.
-
-========================
- IAM policy tests
-========================
-
-This is a set of IAM policy tests.
-This section covers tests for user policies such as Put, Get, List, Delete, user policies with s3 actions, conflicting user policies etc
-These tests uses Boto3 libraries. Tests are written in the ``s3test_boto3`` directory.
-
-These iam policy tests uses two users with profile name "iam" and "s3 alt" as mentioned in s3tests.conf.SAMPLE.
-If Ceph cluster is started with vstart, then above two users will get created as part of vstart with same access key, secrete key etc as mentioned in s3tests.conf.SAMPLE.
-Out of those two users, "iam" user is with capabilities --caps=user-policy=* and "s3 alt" user is without capabilities.
-Adding above capabilities to "iam" user is also taken care by vstart (If Ceph cluster is started with vstart).
-
-To run these tests, create configuration file with section "iam" and "s3 alt" refer s3tests.conf.SAMPLE.
-Once you have that configuration file copied and edited, you can run all the tests with::
-
-	S3TEST_CONF=your.conf tox s3tests_boto3/functional/test_iam.py
-
-You can also specify specific test to run::
-
-	S3TEST_CONF=your.conf tox s3tests_boto3/functional/test_iam.py::test_put_user_policy
-
-Some tests have attributes set such as "fails_on_rgw".
-You can filter tests based on their attributes::
-
-	S3TEST_CONF=your.conf tox -- s3tests_boto3/functional/test_iam.py -m 'not fails_on_rgw'
+- We should assume read-after-write consistency, and make the tests
+  actually request such a location.
 
+  http://aws.amazon.com/s3/faqs/#What_data_consistency_model_does_Amazon_S3_employ

bootstrap

@@ -0,0 +1,28 @@
+#!/bin/sh
+set -e
+
+for package in python-pip python-virtualenv python-dev libevent-dev; do
+    if [ "$(dpkg --status -- $package|sed -n 's/^Status: //p')" != "install ok installed" ]; then
+	# add a space after old values
+	missing="${missing:+$missing }$package"
+    fi
+done
+if [ -n "$missing" ]; then
+    echo "$0: missing required packages, please install them:" 1>&2
+    echo "sudo apt-get install $missing"
+    exit 1
+fi
+
+virtualenv --no-site-packages --distribute virtualenv
+
+# avoid pip bugs
+./virtualenv/bin/pip install --upgrade pip
+
+./virtualenv/bin/pip install -r requirements.txt
+
+# forbid setuptools from using the network because it'll try to use
+# easy_install, and we really wanted pip; next line will fail if pip
+# requirements.txt does not match setup.py requirements -- sucky but
+# good enough for now
+./virtualenv/bin/python setup.py develop \
+    --allow-hosts None

config.yaml.SAMPLE

@@ -0,0 +1,82 @@
+fixtures:
+## All the buckets created will start with this prefix;
+## {random} will be filled with random characters to pad
+## the prefix to 30 characters long, and avoid collisions
+  bucket prefix: YOURNAMEHERE-{random}-
+
+file_generation:
+  groups:
+## File generation works by creating N groups of files. Each group of
+## files is defined by three elements: number of files, avg(filesize),
+## and stddev(filesize) -- in that order.
+    - [1, 2, 3]
+    - [4, 5, 6]
+
+## Config for the readwrite tool.
+## The readwrite tool concurrently reads and writes to files in a
+## single bucket for a set duration.
+## Note: the readwrite tool does not need the s3.alt connection info.
+## only s3.main is used.
+readwrite:
+## The number of reader and writer worker threads. This sets how many
+## files will be read and written concurrently.
+  readers: 2
+  writers: 2
+## The duration to run in seconds. Doesn't count setup/warmup time
+  duration: 15
+
+  files:
+## The number of files to use. This number of files is created during the
+## "warmup" phase. After the warmup, readers will randomly pick a file to
+## read, and writers will randomly pick a file to overwrite
+    num: 3
+## The file size to use, in KB
+    size: 1024
+## The stddev for the file size, in KB
+    stddev: 0
+
+s3:
+## This section contains all the connection information
+
+  defaults:
+## This section contains the defaults for all of the other connections
+## below. You can also place these variables directly there.
+
+## Replace with e.g. "localhost" to run against local software
+    host: s3.amazonaws.com
+
+## Uncomment the port to use soemthing other than 80
+#    port: 8080
+
+## Say "no" to disable TLS.
+    is_secure: yes
+
+## The tests assume two accounts are defined, "main" and "alt". You
+## may add other connections to be instantianted as well, however
+## any additional ones will not be used unless your tests use them.
+
+  main:
+
+## The User ID that the S3 provider gives you. For AWS, this is
+## typically a 64-char hexstring.
+    user_id: AWS_USER_ID
+
+## Display name typically looks more like a unix login, "jdoe" etc
+    display_name: AWS_DISPLAY_NAME
+
+## The email for this account.
+    email: AWS_EMAIL
+
+## Replace these with your access keys.
+    access_key: AWS_ACCESS_KEY
+    secret_key: AWS_SECRET_KEY
+
+  alt:
+## Another user accout, used for ACL-related tests.
+
+    user_id: AWS_USER_ID
+    display_name: AWS_DISPLAY_NAME
+    email: AWS_EMAIL
+    access_key: AWS_ACCESS_KEY
+    secret_key: AWS_SECRET_KEY
+

pytest.ini

@@ -1,51 +0,0 @@
-[pytest]
-markers =
-    abac_test
-    appendobject
-    auth_aws2
-    auth_aws4
-    auth_common
-    bucket_policy
-    bucket_encryption
-    checksum
-    cloud_transition
-    encryption
-    fails_on_aws
-    fails_on_dbstore
-    fails_on_dho
-    fails_on_mod_proxy_fcgi
-    fails_on_rgw
-    fails_on_s3
-    fails_with_subdomain
-    group
-    group_policy
-    iam_account
-    iam_cross_account
-    iam_role
-    iam_tenant
-    iam_user
-    lifecycle
-    lifecycle_expiration
-    lifecycle_transition
-    list_objects_v2
-    object_lock
-    role_policy
-    session_policy
-    s3select
-    s3website
-    s3website_routing_rules
-    s3website_redirect_location
-    sns
-    sse_s3
-    storage_class
-    tagging
-    test_of_sts
-    token_claims_trust_policy_test
-    token_principal_tag_role_policy_test
-    token_request_tag_trust_policy_test
-    token_resource_tags_test
-    token_role_tags_test
-    token_tag_keys_test
-    user_policy
-    versioning
-    webidentity_test

request_decision_graph.yml

@@ -0,0 +1,509 @@
+#
+# FUZZ testing uses a probabalistic grammar to generate
+# pseudo-random requests which will be sent to a server
+# over long periods of time, with the goal of turning up 
+# garbage-input and buffer-overflow sensitivities.
+#
+# Each state ...
+#       generates/chooses contents for variables
+#       chooses a next state (from a weighted set of options)
+#
+# A terminal state is one from which there are no successors,
+# at which point a message is generated (from the variables)
+# and sent to the server.  
+#
+# The test program doesn't actually know (or care) what 
+# response should be returned ... since the goal is to
+# crash the server.
+#
+start:
+    set:
+        garbage:
+            - '{random 10-3000 printable}'
+            - '{random 10-1000 binary}'
+        garbage_no_whitespace:
+            - '{random 10-3000 printable_no_whitespace}'
+            - '{random 10-1000 binary_no_whitespace}'
+        acl_header:
+            - 'private'
+            - 'public-read'
+            - 'public-read-write'
+            - 'authenticated-read'
+            - 'bucket-owner-read'
+            - 'bucket-owner-full-control'
+            - '{random 3000 letters}'
+            - '{random 100-1000 binary_no_whitespace}'
+    choices:
+        - bucket
+        - object
+
+bucket:
+    set:
+        urlpath: '/{bucket}'
+    choices:
+        - 13 bucket_get
+        - 8 bucket_put
+        - 5 bucket_delete
+        - bucket_garbage_method
+
+bucket_garbage_method:
+    set:
+        method:
+            - '{random 1-100 printable}'
+            - '{random 10-100 binary}'
+        bucket:
+            - '{bucket_readable}'
+            - '{bucket_not_readable}'
+            - '{bucket_writable}'
+            - '{bucket_not_writable}'
+            - '2 {garbage_no_whitespace}'
+    choices:
+        - bucket_get_simple
+        - bucket_get_filtered
+        - bucket_get_uploads
+        - bucket_put_create
+        - bucket_put_versioning
+        - bucket_put_simple
+
+bucket_delete:
+    set:
+        method: DELETE
+        bucket:
+            - '{bucket_writable}'
+            - '{bucket_not_writable}'
+            - '2 {garbage_no_whitespace}'
+        query:
+            - null
+            - policy
+            - website
+            - '2 {garbage_no_whitespace}'
+    choices: []
+
+bucket_get:
+    set:
+        method: GET
+        bucket:
+            - '{bucket_readable}'
+            - '{bucket_not_readable}'
+            - '2 {garbage_no_whitespace}'
+    choices:
+        - 11 bucket_get_simple
+        - bucket_get_filtered
+        - bucket_get_uploads
+
+bucket_get_simple:
+    set:
+        query:
+            - acl
+            - policy
+            - location
+            - logging
+            - notification
+            - versions
+            - requestPayment
+            - versioning
+            - website
+            - '2 {garbage_no_whitespace}'
+    choices: []
+
+bucket_get_uploads:
+    set:
+        delimiter:
+            - null
+            - '3 delimiter={garbage_no_whitespace}'
+        prefix:
+            - null
+            - '3 prefix={garbage_no_whitespace}'
+        key_marker:
+            - null
+            - 'key-marker={object_readable}'
+            - 'key-marker={object_not_readable}'
+            - 'key-marker={invalid_key}'
+            - 'key-marker={random 100-1000 printable_no_whitespace}'
+        max_uploads:
+            - null
+            - 'max-uploads={random 1-5 binary_no_whitespace}'
+            - 'max-uploads={random 1-1000 digits}'
+        upload_id_marker:
+            - null
+            - '3 upload-id-marker={random 0-1000 printable_no_whitespace}'
+        query:
+            - 'uploads'
+            - 'uploads&{delimiter}&{prefix}'
+            - 'uploads&{max_uploads}&{key_marker}&{upload_id_marker}'
+            - '2 {garbage_no_whitespace}'
+    choices: []
+
+bucket_get_filtered:
+    set:
+        delimiter:
+            - 'delimiter={garbage_no_whitespace}'
+        prefix:
+            - 'prefix={garbage_no_whitespace}'
+        marker:
+            - 'marker={object_readable}'
+            - 'marker={object_not_readable}'
+            - 'marker={invalid_key}'
+            - 'marker={random 100-1000 printable_no_whitespace}'
+        max_keys:
+            - 'max-keys={random 1-5 binary_no_whitespace}'
+            - 'max-keys={random 1-1000 digits}'
+        query:
+            - null
+            - '{delimiter}&{prefix}'
+            - '{max-keys}&{marker}'
+            - '2 {garbage_no_whitespace}'
+    choices: []
+
+bucket_put:
+    set:
+        bucket:
+            - '{bucket_writable}'
+            - '{bucket_not_writable}'
+            - '2 {garbage_no_whitespace}'
+        method: PUT
+    choices:
+        - bucket_put_simple
+        - bucket_put_create
+        - bucket_put_versioning
+
+bucket_put_create:
+    set:
+        body:
+            - '2 {garbage}'
+            - '<CreateBucketConfiguration><LocationConstraint>{random 2-10 binary}</LocationConstraint></CreateBucketConfiguration>'
+    headers:
+        - ['0-5', 'x-amz-acl', '{acl_header}']
+    choices: []
+
+bucket_put_versioning:
+    set:
+        body:
+            - '{garbage}'
+            - '4 <VersioningConfiguration>{versioning_status}{mfa_delete_body}</VersioningConfiguration>'
+        mfa_delete_body:
+            - null
+            - '<Status>{random 2-10 binary}</Status>'
+            - '<Status>{random 2000-3000 printable}</Status>'
+        versioning_status:
+            - null
+            - '<MfaDelete>{random 2-10 binary}</MfaDelete>'
+            - '<MfaDelete>{random 2000-3000 printable}</MfaDelete>'
+        mfa_header:
+            - '{random 10-1000 printable_no_whitespace} {random 10-1000 printable_no_whitespace}'
+    headers:
+        - ['0-1', 'x-amz-mfa', '{mfa_header}']
+    choices: []
+
+bucket_put_simple:
+    set:
+        body:
+            - '{acl_body}'
+            - '{policy_body}'
+            - '{logging_body}'
+            - '{notification_body}'
+            - '{request_payment_body}'
+            - '{website_body}'
+        acl_body:
+            - null
+            - '<AccessControlPolicy>{owner}{acl}</AccessControlPolicy>'
+        owner:
+            - null
+            - '7 <Owner>{id}{display_name}</Owner>'
+        id:
+            - null
+            - '<ID>{random 10-200 binary}</ID>'
+            - '<ID>{random 1000-3000 printable}</ID>'
+        display_name:
+            - null
+            - '2 <DisplayName>{random 10-200 binary}</DisplayName>'
+            - '2 <DisplayName>{random 1000-3000 printable}</DisplayName>'
+            - '2 <DisplayName>{random 10-300 letters}@{random 10-300 letters}.{random 2-4 letters}</DisplayName>'
+        acl:
+            - null
+            - '10 <AccessControlList><Grant>{grantee}{permission}</Grant></AccessControlList>'
+        grantee:
+            - null
+            - '7 <Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="CanonicalUser">{id}{display_name}</Grantee>'
+        permission:
+            - null
+            - '7 <Permission>{permission_value}</Permission>'
+        permission_value:
+            - '2 {garbage}'
+            - FULL_CONTROL
+            - WRITE
+            - WRITE_ACP
+            - READ
+            - READ_ACP
+        policy_body:
+            - null
+            - '2 {garbage}'
+        logging_body:
+            - null
+            - '<BucketLoggingStatus xmlns="http://doc.s3.amazonaws.com/2006-03-01" />'
+            - '<BucketLoggingStatus xmlns="http://doc.s3.amazonaws.com/2006-03-01"><LoggingEnabled>{bucket}{target_prefix}{target_grants}</LoggingEnabled></BucketLoggingStatus>'
+        target_prefix:
+            - null
+            - '<TargetPrefix>{random 10-1000 printable}</TargetPrefix>'
+            - '<TargetPrefix>{random 10-1000 binary}</TargetPrefix>'
+        target_grants:
+            - null
+            - '10 <TargetGrants><Grant>{grantee}{permission}</Grant></TargetGrants>'
+        notification_body:
+            - null
+            - '<NotificationConfiguration />'
+            - '2 <NotificationConfiguration><TopicConfiguration>{topic}{event}</TopicConfiguration></NotificationConfiguration>'
+        topic:
+            - null
+            - '2 <Topic>{garbage}</Topic>'
+        event:
+            - null
+            - '<Event>s3:ReducedRedundancyLostObject</Event>'
+            - '2 <Event>{garbage}</Event>'
+        request_payment_body:
+            - null
+            - '<RequestPaymentConfiguration xlmns="http://s3.amazonaws.com/doc/2006-03-01/"><Payer>{payer}</Payer></RequestPaymentConfiguration>'
+        payer:
+            - Requester
+            - BucketOwner
+            - '2 {garbage}'
+        website_body:
+            - null
+            - '<WebsiteConfiguration xmlns="http://s3.amazonaws.com/doc/2006-03-01/"><IndexDocument><Suffix>{suffix}</Suffix><IndexDocument>{error_doc}<WebsiteConfiguration/>'
+        suffix:
+            - null
+            - '2 {garbage}'
+            - '{random 2-10 printable}.html'
+        error_doc:
+            - null
+            - '<ErrorDocument><Key>{suffix}</Key></ErrorDocument>'
+    choices: []
+
+object:
+    set:
+        urlpath: '/{bucket}/{object}'
+
+        range_header:
+            - null
+            - 'bytes={random 1-2 digits}-{random 1-4 digits}'
+            - 'bytes={random 1-1000 binary_no_whitespace}'
+        if_modified_since_header:
+            - null
+            - '2 {garbage_no_whitespace}'
+        if_match_header:
+            - null
+            - '2 {garbage_no_whitespace}'
+        if_none_match_header:
+            - null
+            - '2 {garbage_no_whitespace}'
+    choices:
+        - object_delete
+        - object_get
+        - object_put
+        - object_head
+        - object_garbage_method
+
+object_garbage_method:
+    set:
+        method:
+            - '{random 1-100 printable}'
+            - '{random 10-100 binary}'
+        bucket:
+            - '{bucket_readable}'
+            - '{bucket_not_readable}'
+            - '{bucket_writable}'
+            - '{bucket_not_writable}'
+            - '2 {garbage_no_whitespace}'
+        object:
+            - '{object_readable}'
+            - '{object_not_readable}'
+            - '{object_writable}'
+            - '{object_not_writable}'
+            - '2 {garbage_no_whitespace}'
+    choices:
+        - object_get_query
+        - object_get_head_simple
+
+object_delete:
+    set:
+        method: DELETE
+        bucket:
+            - '5 {bucket_writable}'
+            - '{bucket_not_writable}'
+            - '{garbage_no_whitespace}'
+        object:
+            - '{object_writable}'
+            - '{object_not_writable}'
+            - '2 {garbage_no_whitespace}'
+    choices: []
+
+object_get:
+    set:
+        method: GET
+        bucket:
+            - '5 {bucket_readable}'
+            - '{bucket_not_readable}'
+            - '{garbage_no_whitespace}'
+        object:
+            - '{object_readable}'
+            - '{object_not_readable}'
+            - '{garbage_no_whitespace}'
+    choices:
+        - 5 object_get_head_simple
+        - 2 object_get_query
+
+object_get_query:
+    set:
+        query: 
+            - 'torrent'
+            - 'acl'
+    choices: []
+
+object_get_head_simple:
+    set: {}
+    headers:
+        - ['0-1', 'range', '{range_header}']
+        - ['0-1', 'if-modified-since', '{if_modified_since_header}']
+        - ['0-1', 'if-unmodified-since', '{if_modified_since_header}']
+        - ['0-1', 'if-match', '{if_match_header}']
+        - ['0-1', 'if-none-match', '{if_none_match_header}']
+    choices: []
+
+object_head:
+    set:
+        method: HEAD
+        bucket:
+            - '5 {bucket_readable}'
+            - '{bucket_not_readable}'
+            - '{garbage_no_whitespace}'
+        object:
+            - '{object_readable}'
+            - '{object_not_readable}'
+            - '{garbage_no_whitespace}'
+    choices:
+        - object_get_head_simple
+
+object_put:
+    set:
+        method: PUT
+        bucket:
+            - '5 {bucket_writable}'
+            - '{bucket_not_writable}'
+            - '{garbage_no_whitespace}'
+        object:
+            - '{object_writable}'
+            - '{object_not_writable}'
+            - '{garbage_no_whitespace}'
+        cache_control:
+            - null
+            - '{garbage_no_whitespace}'
+            - 'no-cache'
+        content_disposition:
+            - null
+            - '{garbage_no_whitespace}'
+        content_encoding:
+            - null
+            - '{garbage_no_whitespace}'
+        content_length:
+            - '{random 1-20 digits}'
+            - '{garbage_no_whitespace}'
+        content_md5:
+            - null
+            - '{garbage_no_whitespace}'
+        content_type:
+            - null
+            - 'binary/octet-stream'
+            - '{garbage_no_whitespace}'
+        expect:
+            - null
+            - '100-continue'
+            - '{garbage_no_whitespace}'
+        expires:
+            - null
+            - '{random 1-10000000 digits}'
+            - '{garbage_no_whitespace}'
+        meta_key:
+            - null
+            - 'foo'
+            - '{garbage_no_whitespace}'
+        meta_value:
+            - null
+            - '{garbage_no_whitespace}'
+    choices:
+        - object_put_simple
+        - object_put_acl
+        - object_put_copy
+
+object_put_simple:
+    set: {}
+    headers:
+        - ['0-1', 'cache-control', '{cache_control}']
+        - ['0-1', 'content-disposition', '{content_disposition}']
+        - ['0-1', 'content-encoding', '{content_encoding}']
+        - ['0-1', 'content-length', '{content_length}']
+        - ['0-1', 'content-md5', '{content_md5}']
+        - ['0-1', 'content-type', '{content_type}']
+        - ['0-1', 'expect', '{expect}']
+        - ['0-1', 'expires', '{expires}']
+        - ['0-1', 'x-amz-acl', '{acl_header}']
+        - ['0-6', 'x-amz-meta-{meta_key}', '{meta_value}']
+    choices: []
+
+object_put_acl:
+    set:
+        query: 'acl'
+        body:
+            - null
+            - '2 {garbage}'
+            - '<AccessControlPolicy>{owner}{acl}</AccessControlPolicy>'
+        owner:
+            - null
+            - '7 <Owner>{id}{display_name}</Owner>'
+        id:
+            - null
+            - '<ID>{random 10-200 binary}</ID>'
+            - '<ID>{random 1000-3000 printable}</ID>'
+        display_name:
+            - null
+            - '2 <DisplayName>{random 10-200 binary}</DisplayName>'
+            - '2 <DisplayName>{random 1000-3000 printable}</DisplayName>'
+            - '2 <DisplayName>{random 10-300 letters}@{random 10-300 letters}.{random 2-4 letters}</DisplayName>'
+        acl:
+            - null
+            - '10 <AccessControlList><Grant>{grantee}{permission}</Grant></AccessControlList>'
+        grantee:
+            - null
+            - '7 <Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="CanonicalUser">{id}{display_name}</Grantee>'
+        permission:
+            - null
+            - '7 <Permission>{permission_value}</Permission>'
+        permission_value:
+            - '2 {garbage}'
+            - FULL_CONTROL
+            - WRITE
+            - WRITE_ACP
+            - READ
+            - READ_ACP
+    headers:
+        - ['0-1', 'cache-control', '{cache_control}']
+        - ['0-1', 'content-disposition', '{content_disposition}']
+        - ['0-1', 'content-encoding', '{content_encoding}']
+        - ['0-1', 'content-length', '{content_length}']
+        - ['0-1', 'content-md5', '{content_md5}']
+        - ['0-1', 'content-type', '{content_type}']
+        - ['0-1', 'expect', '{expect}']
+        - ['0-1', 'expires', '{expires}']
+        - ['0-1', 'x-amz-acl', '{acl_header}']
+    choices: []
+
+object_put_copy:
+    set: {}
+    headers:
+        - ['1-1', 'x-amz-copy-source', '{source_object}']
+        - ['0-1', 'x-amz-acl', '{acl_header}']
+        - ['0-1', 'x-amz-metadata-directive', '{metadata_directive}']
+        - ['0-1', 'x-amz-copy-source-if-match', '{if_match_header}']
+        - ['0-1', 'x-amz-copy-source-if-none-match', '{if_none_match_header}']
+        - ['0-1', 'x-amz-copy-source-if-modified-since', '{if_modified_since_header}']
+        - ['0-1', 'x-amz-copy-source-if-unmodified-since', '{if_modified_since_header}']
+    choices: []

requirements.txt

@@ -1,15 +1,10 @@
 PyYAML
-boto >=2.6.0
-boto3 >=1.0.0
-# botocore-1.28 broke v2 signatures, see https://tracker.ceph.com/issues/58059
-botocore <1.28.0
-munch >=2.0.0
+nose >=1.0.0
+boto ==2.4.1
+bunch >=1.0.0
 # 0.14 switches to libev, that means bootstrap needs to change too
-gevent >=1.0
+gevent ==0.13.6
 isodate >=0.4.4
-requests >=2.23.0
+requests
 pytz
-httplib2
-lxml
-pytest
-tox
+ordereddict

s3tests.conf.SAMPLE

@@ -1,171 +0,0 @@
-[DEFAULT]
-## this section is just used for host, port and bucket_prefix
-
-# host set for rgw in vstart.sh
-host = localhost
-
-# port set for rgw in vstart.sh
-port = 8000
-
-## say "False" to disable TLS
-is_secure = False
-
-## say "False" to disable SSL Verify
-ssl_verify = False
-
-[fixtures]
-## all the buckets created will start with this prefix;
-## {random} will be filled with random characters to pad
-## the prefix to 30 characters long, and avoid collisions
-bucket prefix = yournamehere-{random}-
-
-# all the iam account resources (users, roles, etc) created
-# will start with this name prefix
-iam name prefix = s3-tests-
-
-# all the iam account resources (users, roles, etc) created
-# will start with this path prefix
-iam path prefix = /s3-tests/
-
-[s3 main]
-# main display_name set in vstart.sh
-display_name = M. Tester
-
-# main user_idname set in vstart.sh
-user_id = testid
-
-# main email set in vstart.sh
-email = tester@ceph.com
-
-# zonegroup api_name for bucket location
-api_name = default
-
-## main AWS access key
-access_key = 0555b35654ad1656d804
-
-## main AWS secret key
-secret_key = h7GhxuBLTrlhVUyxSPUKUV8r/2EI4ngqJxD7iBdBYLhwluN30JaT3Q==
-
-## replace with key id obtained when secret is created, or delete if KMS not tested
-#kms_keyid = 01234567-89ab-cdef-0123-456789abcdef
-
-## Storage classes
-#storage_classes = "LUKEWARM, FROZEN"
-
-## Lifecycle debug interval (default: 10)
-#lc_debug_interval = 20
-
-[s3 alt]
-# alt display_name set in vstart.sh
-display_name = john.doe
-## alt email set in vstart.sh
-email = john.doe@example.com
-
-# alt user_id set in vstart.sh
-user_id = 56789abcdef0123456789abcdef0123456789abcdef0123456789abcdef01234
-
-# alt AWS access key set in vstart.sh
-access_key = NOPQRSTUVWXYZABCDEFG
-
-# alt AWS secret key set in vstart.sh
-secret_key = nopqrstuvwxyzabcdefghijklmnabcdefghijklm
-
-#[s3 cloud]
-## to run the testcases with "cloud_transition" attribute.
-## Note: the waiting time may have to tweaked depending on
-## the I/O latency to the cloud endpoint.
-
-## host set for cloud endpoint
-# host = localhost
-
-## port set for cloud endpoint
-# port = 8001
-
-## say "False" to disable TLS
-# is_secure = False
-
-## cloud endpoint credentials
-# access_key = 0555b35654ad1656d804
-# secret_key = h7GhxuBLTrlhVUyxSPUKUV8r/2EI4ngqJxD7iBdBYLhwluN30JaT3Q==
-
-## storage class configured as cloud tier on local rgw server
-# cloud_storage_class = CLOUDTIER
-
-## Below are optional -
-
-## Above configured cloud storage class config options
-# retain_head_object = false
-# target_storage_class = Target_SC
-# target_path = cloud-bucket
-
-## another regular storage class to test multiple transition rules,
-# storage_class = S1
-
-[s3 tenant]
-# tenant display_name set in vstart.sh
-display_name = testx$tenanteduser
-
-# tenant user_id set in vstart.sh
-user_id = 9876543210abcdef0123456789abcdef0123456789abcdef0123456789abcdef
-
-# tenant AWS secret key set in vstart.sh
-access_key = HIJKLMNOPQRSTUVWXYZA
-
-# tenant AWS secret key set in vstart.sh
-secret_key = opqrstuvwxyzabcdefghijklmnopqrstuvwxyzab
-
-# tenant email set in vstart.sh
-email = tenanteduser@example.com
-
-# tenant name
-tenant = testx
-
-#following section needs to be added for all sts-tests
-[iam]
-#used for iam operations in sts-tests
-#email from vstart.sh
-email = s3@example.com
-
-#user_id from vstart.sh
-user_id = 0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef
-
-#access_key from vstart.sh
-access_key = ABCDEFGHIJKLMNOPQRST
-
-#secret_key vstart.sh
-secret_key = abcdefghijklmnopqrstuvwxyzabcdefghijklmn
-
-#display_name from vstart.sh
-display_name = youruseridhere
-
-# iam account root user for iam_account tests
-[iam root]
-access_key = AAAAAAAAAAAAAAAAAAaa
-secret_key = aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
-user_id = RGW11111111111111111
-email = account1@ceph.com
-
-# iam account root user in a different account than [iam root]
-[iam alt root]
-access_key = BBBBBBBBBBBBBBBBBBbb
-secret_key = bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
-user_id = RGW22222222222222222
-email = account2@ceph.com
-
-#following section needs to be added when you want to run Assume Role With Webidentity test
-[webidentity]
-#used for assume role with web identity test in sts-tests
-#all parameters will be obtained from ceph/qa/tasks/keycloak.py
-token=<access_token>
-
-aud=<obtained after introspecting token>
-
-sub=<obtained after introspecting token>
-
-azp=<obtained after introspecting token>
-
-user_token=<access token for a user, with attribute Department=[Engineering, Marketing>]
-
-thumbprint=<obtained from x509 certificate>
-
-KC_REALM=<name of the realm>

s3tests/analysis/rwstats.py

@@ -0,0 +1,142 @@
+#!/usr/bin/python
+import sys
+import os
+import yaml
+import optparse
+
+NANOSECONDS = int(1e9)
+
+# Output stats in a format similar to siege
+# see http://www.joedog.org/index/siege-home
+OUTPUT_FORMAT = """Stats for type: [{type}]
+Transactions:            {trans:>11} hits
+Availability:            {avail:>11.2f} %
+Elapsed time:            {elapsed:>11.2f} secs
+Data transferred:        {data:>11.2f} MB
+Response time:           {resp_time:>11.2f} secs
+Transaction rate:        {trans_rate:>11.2f} trans/sec
+Throughput:              {data_rate:>11.2f} MB/sec
+Concurrency:             {conc:>11.2f}
+Successful transactions: {trans_success:>11}
+Failed transactions:     {trans_fail:>11}
+Longest transaction:     {trans_long:>11.2f}
+Shortest transaction:    {trans_short:>11.2f}
+"""
+
+def parse_options():
+    usage = "usage: %prog [options]"
+    parser = optparse.OptionParser(usage=usage)
+    parser.add_option(
+        "-f", "--file", dest="input", metavar="FILE",
+        help="Name of input YAML file. Default uses sys.stdin")
+    parser.add_option(
+        "-v", "--verbose", dest="verbose", action="store_true",
+        help="Enable verbose output")
+
+    (options, args) = parser.parse_args()
+
+    if not options.input and os.isatty(sys.stdin.fileno()):
+        parser.error("option -f required if no data is provided "
+                     "in stdin")
+
+    return (options, args)
+
+def main():
+    (options, args) = parse_options()
+
+    total     = {}
+    durations = {}
+    min_time  = {}
+    max_time  = {}
+    errors    = {}
+    success   = {}
+
+    calculate_stats(options, total, durations, min_time, max_time, errors,
+                    success)
+    print_results(total, durations, min_time, max_time, errors, success)
+
+def calculate_stats(options, total, durations, min_time, max_time, errors,
+                    success):
+    print 'Calculating statistics...'
+    
+    f = sys.stdin
+    if options.input:
+        f = file(options.input, 'r')
+
+    for item in yaml.safe_load_all(f):
+        type_ = item.get('type')
+        if type_ not in ('r', 'w'):
+            continue # ignore any invalid items
+
+        if 'error' in item:
+            errors[type_] = errors.get(type_, 0) + 1
+            continue # skip rest of analysis for this item
+        else:
+            success[type_] = success.get(type_, 0) + 1
+
+        # parse the item
+        data_size = item['chunks'][-1][0]
+        duration = item['duration']
+        start = item['start']
+        end = start + duration / float(NANOSECONDS)
+
+        if options.verbose:
+            print "[{type}] POSIX time: {start:>18.2f} - {end:<18.2f} " \
+                  "{data:>11.2f} KB".format(
+                type=type_,
+                start=start,
+                end=end,
+                data=data_size / 1024.0, # convert to KB
+                )
+
+        # update time boundaries
+        prev = min_time.setdefault(type_, start)
+        if start < prev:
+            min_time[type_] = start
+        prev = max_time.setdefault(type_, end)
+        if end > prev:
+            max_time[type_] = end
+
+        # save the duration
+        if type_ not in durations:
+            durations[type_] = []
+        durations[type_].append(duration)
+
+        # add to running totals
+        total[type_] = total.get(type_, 0) + data_size
+
+def print_results(total, durations, min_time, max_time, errors, success):
+    for type_ in total.keys():
+        trans_success = success.get(type_, 0)
+        trans_fail    = errors.get(type_, 0)
+        trans         = trans_success + trans_fail
+        avail         = trans_success * 100.0 / trans
+        elapsed       = max_time[type_] - min_time[type_]
+        data          = total[type_] / 1024.0 / 1024.0 # convert to MB
+        resp_time     = sum(durations[type_]) / float(NANOSECONDS) / \
+                        len(durations[type_])
+        trans_rate    = trans / elapsed
+        data_rate     = data / elapsed
+        conc          = trans_rate * resp_time
+        trans_long    = max(durations[type_]) / float(NANOSECONDS)
+        trans_short   = min(durations[type_]) / float(NANOSECONDS)
+
+        print OUTPUT_FORMAT.format(
+            type=type_,
+            trans_success=trans_success,
+            trans_fail=trans_fail,
+            trans=trans,
+            avail=avail,
+            elapsed=elapsed,
+            data=data,
+            resp_time=resp_time,
+            trans_rate=trans_rate,
+            data_rate=data_rate,
+            conc=conc,
+            trans_long=trans_long,
+            trans_short=trans_short,
+            )
+
+if __name__ == '__main__':
+    main()
+

s3tests/common.py

@@ -1,18 +1,13 @@
 import boto.s3.connection
-import munch
+import bunch
 import itertools
 import os
 import random
 import string
 import yaml
-import re
-from lxml import etree
 
-from doctest import Example
-from lxml.doctestcompare import LXMLOutputChecker
-
-s3 = munch.Munch()
-config = munch.Munch()
+s3 = bunch.Bunch()
+config = bunch.Bunch()
 prefix = ''
 
 bucket_counter = itertools.count(1)
@@ -51,10 +46,10 @@ def nuke_bucket(bucket):
         while deleted_cnt:
             deleted_cnt = 0
             for key in bucket.list():
-                print('Cleaning bucket {bucket} key {key}'.format(
+                print 'Cleaning bucket {bucket} key {key}'.format(
                     bucket=bucket,
                     key=key,
-                    ))
+                    )
                 key.set_canned_acl('private')
                 key.delete()
                 deleted_cnt += 1
@@ -67,26 +62,26 @@ def nuke_bucket(bucket):
             and e.body == ''):
             e.error_code = 'AccessDenied'
         if e.error_code != 'AccessDenied':
-            print('GOT UNWANTED ERROR', e.error_code)
+            print 'GOT UNWANTED ERROR', e.error_code
             raise
         # seems like we're not the owner of the bucket; ignore
         pass
 
 def nuke_prefixed_buckets():
-    for name, conn in list(s3.items()):
-        print('Cleaning buckets from connection {name}'.format(name=name))
+    for name, conn in s3.items():
+        print 'Cleaning buckets from connection {name}'.format(name=name)
         for bucket in conn.get_all_buckets():
             if bucket.name.startswith(prefix):
-                print('Cleaning bucket {bucket}'.format(bucket=bucket))
+                print 'Cleaning bucket {bucket}'.format(bucket=bucket)
                 nuke_bucket(bucket)
 
-    print('Done with cleanup of test buckets.')
+    print 'Done with cleanup of test buckets.'
 
 def read_config(fp):
-    config = munch.Munch()
+    config = bunch.Bunch()
     g = yaml.safe_load_all(fp)
     for new in g:
-        config.update(munch.Munchify(new))
+        config.update(bunch.bunchify(new))
     return config
 
 def connect(conf):
@@ -97,7 +92,7 @@ def connect(conf):
         access_key='aws_access_key_id',
         secret_key='aws_secret_access_key',
         )
-    kwargs = dict((mapping[k],v) for (k,v) in conf.items() if k in mapping)
+    kwargs = dict((mapping[k],v) for (k,v) in conf.iteritems() if k in mapping)
     #process calling_format argument
     calling_formats = dict(
         ordinary=boto.s3.connection.OrdinaryCallingFormat(),
@@ -105,7 +100,7 @@ def connect(conf):
         vhost=boto.s3.connection.VHostCallingFormat(),
         )
     kwargs['calling_format'] = calling_formats['ordinary']
-    if 'calling_format' in conf:
+    if conf.has_key('calling_format'):
         raw_calling_format = conf['calling_format']
         try:
             kwargs['calling_format'] = calling_formats[raw_calling_format]
@@ -146,7 +141,7 @@ def setup():
         raise RuntimeError("Empty Prefix! Aborting!")
 
     defaults = config.s3.defaults
-    for section in list(config.s3.keys()):
+    for section in config.s3.keys():
         if section == 'defaults':
             continue
 
@@ -186,117 +181,3 @@ def get_new_bucket(connection=None):
 
 def teardown():
     nuke_prefixed_buckets()
-
-def with_setup_kwargs(setup, teardown=None):
-    """Decorator to add setup and/or teardown methods to a test function::
-
-      @with_setup_args(setup, teardown)
-      def test_something():
-          " ... "
-
-    The setup function should return (kwargs) which will be passed to
-    test function, and teardown function.
-
-    Note that `with_setup_kwargs` is useful *only* for test functions, not for test
-    methods or inside of TestCase subclasses.
-    """
-    def decorate(func):
-        kwargs = {}
-
-        def test_wrapped(*args, **kwargs2):
-            k2 = kwargs.copy()
-            k2.update(kwargs2)
-            k2['testname'] = func.__name__
-            func(*args, **k2)
-
-        test_wrapped.__name__ = func.__name__
-
-        def setup_wrapped():
-            k = setup()
-            kwargs.update(k)
-            if hasattr(func, 'setup'):
-                func.setup()
-        test_wrapped.setup = setup_wrapped
-
-        if teardown:
-            def teardown_wrapped():
-                if hasattr(func, 'teardown'):
-                    func.teardown()
-                teardown(**kwargs)
-
-            test_wrapped.teardown = teardown_wrapped
-        else:
-            if hasattr(func, 'teardown'):
-                test_wrapped.teardown = func.teardown()
-        return test_wrapped
-    return decorate
-
-# Demo case for the above, when you run test_gen():
-# _test_gen will run twice,
-# with the following stderr printing
-# setup_func {'b': 2}
-# testcase ('1',) {'b': 2, 'testname': '_test_gen'}
-# teardown_func {'b': 2}
-# setup_func {'b': 2}
-# testcase () {'b': 2, 'testname': '_test_gen'}
-# teardown_func {'b': 2}
-# 
-#def setup_func():
-#    kwargs = {'b': 2}
-#    print("setup_func", kwargs, file=sys.stderr)
-#    return kwargs
-#
-#def teardown_func(**kwargs):
-#    print("teardown_func", kwargs, file=sys.stderr)
-#
-#@with_setup_kwargs(setup=setup_func, teardown=teardown_func)
-#def _test_gen(*args, **kwargs):
-#    print("testcase", args, kwargs, file=sys.stderr)
-#
-#def test_gen():
-#    yield _test_gen, '1'
-#    yield _test_gen
-
-def trim_xml(xml_str):
-    p = etree.XMLParser(encoding="utf-8", remove_blank_text=True)
-    xml_str = bytes(xml_str, "utf-8")
-    elem = etree.XML(xml_str, parser=p)
-    return etree.tostring(elem, encoding="unicode")
-
-def normalize_xml(xml, pretty_print=True):
-    if xml is None:
-        return xml
-
-    root = etree.fromstring(xml.encode(encoding='ascii'))
-
-    for element in root.iter('*'):
-        if element.text is not None and not element.text.strip():
-            element.text = None
-        if element.text is not None:
-            element.text = element.text.strip().replace("\n", "").replace("\r", "")
-        if element.tail is not None and not element.tail.strip():
-            element.tail = None
-        if element.tail is not None:
-            element.tail = element.tail.strip().replace("\n", "").replace("\r", "")
-
-    # Sort the elements
-    for parent in root.xpath('//*[./*]'): # Search for parent elements
-          parent[:] = sorted(parent,key=lambda x: x.tag)
-
-    xmlstr = etree.tostring(root, encoding="unicode", pretty_print=pretty_print)
-    # there are two different DTD URIs
-    xmlstr = re.sub(r'xmlns="[^"]+"', 'xmlns="s3"', xmlstr)
-    xmlstr = re.sub(r'xmlns=\'[^\']+\'', 'xmlns="s3"', xmlstr)
-    for uri in ['http://doc.s3.amazonaws.com/doc/2006-03-01/', 'http://s3.amazonaws.com/doc/2006-03-01/']:
-        xmlstr = xmlstr.replace(uri, 'URI-DTD')
-    #xmlstr = re.sub(r'>\s+', '>', xmlstr, count=0, flags=re.MULTILINE)
-    return xmlstr
-
-def assert_xml_equal(got, want):
-    assert want is not None, 'Wanted XML cannot be None'
-    if got is None:
-        raise AssertionError('Got input to validate was None')
-    checker = LXMLOutputChecker()
-    if not checker.check_output(want, got, 0):
-        message = checker.output_difference(Example("", want), got, 0)
-        raise AssertionError(message)

s3tests/functional/AnonymousAuth.py

@@ -0,0 +1,5 @@
+from boto.auth_handler import AuthHandler
+
+class AnonymousAuthHandler(AuthHandler):
+    def add_auth(self, http_request, **kwargs):
+        return # Nothing to do for anonymous access!

s3tests/functional/__init__.py

@@ -1,38 +1,22 @@
-import sys
-import configparser
+import ConfigParser
 import boto.exception
 import boto.s3.connection
-import munch
+import bunch
 import itertools
 import os
 import random
 import string
-import pytest
-from http.client import HTTPConnection, HTTPSConnection
-from urllib.parse import urlparse
 
-from .utils import region_sync_meta
-
-s3 = munch.Munch()
-config = munch.Munch()
-targets = munch.Munch()
+s3 = bunch.Bunch()
+config = bunch.Bunch()
 
 # this will be assigned by setup()
 prefix = None
 
-calling_formats = dict(
-    ordinary=boto.s3.connection.OrdinaryCallingFormat(),
-    subdomain=boto.s3.connection.SubdomainCallingFormat(),
-    vhost=boto.s3.connection.VHostCallingFormat(),
-    )
-
 def get_prefix():
     assert prefix is not None
     return prefix
 
-def is_slow_backend():
-    return slow_backend
-
 def choose_bucket_prefix(template, max_len=30):
     """
     Choose a prefix for our test buckets, so they're easy to identify.
@@ -58,201 +42,33 @@ def choose_bucket_prefix(template, max_len=30):
         )
 
 
-def nuke_prefixed_buckets_on_conn(prefix, name, conn):
-    print('Cleaning buckets from connection {name} prefix {prefix!r}.'.format(
+def nuke_prefixed_buckets(prefix):
+    for name, conn in s3.items():
+        print 'Cleaning buckets from connection {name} prefix {prefix!r}.'.format(
             name=name,
             prefix=prefix,
-        ))
-
+            )
         for bucket in conn.get_all_buckets():
-        print('prefix=',prefix)
             if bucket.name.startswith(prefix):
-            print('Cleaning bucket {bucket}'.format(bucket=bucket))
-            success = False
-            for i in range(2):
+                print 'Cleaning bucket {bucket}'.format(bucket=bucket)
                 try:
-                    try:
-                        iterator = iter(bucket.list_versions())
-                        # peek into iterator to issue list operation
-                        try:
-                            keys = itertools.chain([next(iterator)], iterator)
-                        except StopIteration:
-                            keys = []  # empty iterator
-                    except boto.exception.S3ResponseError as e:
-                        # some S3 implementations do not support object
-                        # versioning - fall back to listing without versions
-                        if e.error_code != 'NotImplemented':
-                            raise e
-                        keys = bucket.list();
-                    for key in keys:
-                        print('Cleaning bucket {bucket} key {key}'.format(
+                    bucket.set_canned_acl('private')
+                    for key in bucket.list():
+                        print 'Cleaning bucket {bucket} key {key}'.format(
                             bucket=bucket,
                             key=key,
-                            ))
-                        # key.set_canned_acl('private')
-                        bucket.delete_key(key.name, version_id = key.version_id)
-                    try:
+                            )
+                        key.set_canned_acl('private')
+                        key.delete()
                     bucket.delete()
-                    except boto.exception.S3ResponseError as e:
-                        # if DELETE times out, the retry may see NoSuchBucket
-                        if e.error_code != 'NoSuchBucket':
-                            raise e
-                        pass
-                    success = True
                 except boto.exception.S3ResponseError as e:
                     if e.error_code != 'AccessDenied':
-                        print('GOT UNWANTED ERROR', e.error_code)
+                        print 'GOT UNWANTED ERROR', e.error_code
                         raise
-                    # seems like we don't have permissions set appropriately, we'll
-                    # modify permissions and retry
+                    # seems like we're not the owner of the bucket; ignore
                     pass
 
-                if success:
-                    break
-
-                bucket.set_canned_acl('private')
-
-
-def nuke_prefixed_buckets(prefix):
-    # If no regions are specified, use the simple method
-    if targets.main.master == None:
-        for name, conn in list(s3.items()):
-            print('Deleting buckets on {name}'.format(name=name))
-            nuke_prefixed_buckets_on_conn(prefix, name, conn)
-    else: 
-		    # First, delete all buckets on the master connection 
-		    for name, conn in list(s3.items()):
-		        if conn == targets.main.master.connection:
-		            print('Deleting buckets on {name} (master)'.format(name=name))
-		            nuke_prefixed_buckets_on_conn(prefix, name, conn)
-		
-		    # Then sync to propagate deletes to secondaries
-		    region_sync_meta(targets.main, targets.main.master.connection)
-		    print('region-sync in nuke_prefixed_buckets')
-		
-		    # Now delete remaining buckets on any other connection 
-		    for name, conn in list(s3.items()):
-		        if conn != targets.main.master.connection:
-		            print('Deleting buckets on {name} (non-master)'.format(name=name))
-		            nuke_prefixed_buckets_on_conn(prefix, name, conn)
-
-    print('Done with cleanup of test buckets.')
-
-class TargetConfig:
-    def __init__(self, cfg, section):
-        self.port = None
-        self.api_name = ''
-        self.is_master = False
-        self.is_secure = False
-        self.sync_agent_addr = None
-        self.sync_agent_port = 0
-        self.sync_meta_wait = 0
-        try:
-            self.api_name = cfg.get(section, 'api_name')
-        except (configparser.NoSectionError, configparser.NoOptionError):
-            pass
-        try:
-            self.port = cfg.getint(section, 'port')
-        except configparser.NoOptionError:
-            pass
-        try:
-            self.host=cfg.get(section, 'host')
-        except configparser.NoOptionError:
-            raise RuntimeError(
-                'host not specified for section {s}'.format(s=section)
-                )
-        try:
-            self.is_master=cfg.getboolean(section, 'is_master')
-        except configparser.NoOptionError:
-            pass
-
-        try:
-            self.is_secure=cfg.getboolean(section, 'is_secure')
-        except configparser.NoOptionError:
-            pass
-
-        try:
-            raw_calling_format = cfg.get(section, 'calling_format')
-        except configparser.NoOptionError:
-            raw_calling_format = 'ordinary'
-
-        try:
-            self.sync_agent_addr = cfg.get(section, 'sync_agent_addr')
-        except (configparser.NoSectionError, configparser.NoOptionError):
-            pass
-
-        try:
-            self.sync_agent_port = cfg.getint(section, 'sync_agent_port')
-        except (configparser.NoSectionError, configparser.NoOptionError):
-            pass
-
-        try:
-            self.sync_meta_wait = cfg.getint(section, 'sync_meta_wait')
-        except (configparser.NoSectionError, configparser.NoOptionError):
-            pass
-
-
-        try:
-            self.calling_format = calling_formats[raw_calling_format]
-        except KeyError:
-            raise RuntimeError(
-                'calling_format unknown: %r' % raw_calling_format
-                )
-
-class TargetConnection:
-    def __init__(self, conf, conn):
-        self.conf = conf
-        self.connection = conn
-
-
-
-class RegionsInfo:
-    def __init__(self):
-        self.m = munch.Munch()
-        self.master = None
-        self.secondaries = []
-
-    def add(self, name, region_config):
-        self.m[name] = region_config
-        if (region_config.is_master):
-            if not self.master is None:
-                raise RuntimeError(
-                    'multiple regions defined as master'
-                    )
-            self.master = region_config
-        else:
-            self.secondaries.append(region_config)
-    def get(self, name):
-        return self.m[name]
-    def get(self):
-        return self.m
-    def items(self):
-        return self.m.items()
-
-regions = RegionsInfo()
-
-
-class RegionsConn:
-    def __init__(self):
-        self.m = munch.Munch()
-        self.default = None
-        self.master = None
-        self.secondaries = []
-
-    def items(self):
-        return self.m.items()
-
-    def set_default(self, conn):
-        self.default = conn
-
-    def add(self, name, conn):
-        self.m[name] = conn
-        if not self.default:
-            self.default = conn
-        if (conn.conf.is_master):
-            self.master = conn
-        else:
-            self.secondaries.append(conn)
+    print 'Done with cleanup of test buckets.'
 
 
 # nosetests --processes=N with N>1 is safe
@@ -260,7 +76,7 @@ _multiprocess_can_split_ = True
 
 def setup():
 
-    cfg = configparser.RawConfigParser()
+    cfg = ConfigParser.RawConfigParser()
     try:
         path = os.environ['S3TEST_CONF']
     except KeyError:
@@ -268,41 +84,23 @@ def setup():
             'To run tests, point environment '
             + 'variable S3TEST_CONF to a config file.',
             )
-    cfg.read(path)
+    with file(path) as f:
+        cfg.readfp(f)
 
     global prefix
-    global targets
-    global slow_backend
-
     try:
         template = cfg.get('fixtures', 'bucket prefix')
-    except (configparser.NoSectionError, configparser.NoOptionError):
+    except (ConfigParser.NoSectionError, ConfigParser.NoOptionError):
         template = 'test-{random}-'
     prefix = choose_bucket_prefix(template=template)
 
-    try:
-        slow_backend = cfg.getboolean('fixtures', 'slow backend')
-    except (configparser.NoSectionError, configparser.NoOptionError):
-        slow_backend = False
-
-    # pull the default_region out, if it exists
-    try:
-        default_region = cfg.get('fixtures', 'default_region')
-    except (configparser.NoSectionError, configparser.NoOptionError):
-        default_region = None
-
     s3.clear()
     config.clear()
-
-    for section in cfg.sections():
-        try:
-            (type_, name) = section.split(None, 1)
-        except ValueError:
-            continue
-        if type_ != 'region':
-            continue
-        regions.add(name, TargetConfig(cfg, section))
-
+    calling_formats = dict(
+        ordinary=boto.s3.connection.OrdinaryCallingFormat(),
+        subdomain=boto.s3.connection.SubdomainCallingFormat(),
+        vhost=boto.s3.connection.VHostCallingFormat(),
+        )
     for section in cfg.sections():
         try:
             (type_, name) = section.split(None, 1)
@@ -310,52 +108,43 @@ def setup():
             continue
         if type_ != 's3':
             continue
+        try:
+            port = cfg.getint(section, 'port')
+        except ConfigParser.NoOptionError:
+            port = None
 
-        if len(regions.get()) == 0:
-            regions.add("default", TargetConfig(cfg, section))
+        try:
+            raw_calling_format = cfg.get(section, 'calling_format')
+        except ConfigParser.NoOptionError:
+            raw_calling_format = 'ordinary'
 
-        config[name] = munch.Munch()
+        try:
+            calling_format = calling_formats[raw_calling_format]
+        except KeyError:
+            raise RuntimeError(
+                'calling_format unknown: %r' % raw_calling_format
+                )
+
+        config[name] = bunch.Bunch()
         for var in [
             'user_id',
             'display_name',
             'email',
-            's3website_domain',
-            'host',
-            'port',
-            'is_secure',
-            'kms_keyid',
-            'storage_classes',
             ]:
             try:
                 config[name][var] = cfg.get(section, var)
-            except configparser.NoOptionError:
+            except ConfigParser.NoOptionError:
                 pass
-
-        targets[name] = RegionsConn()
-
-        for (k, conf) in regions.items():
         conn = boto.s3.connection.S3Connection(
             aws_access_key_id=cfg.get(section, 'access_key'),
             aws_secret_access_key=cfg.get(section, 'secret_key'),
-                is_secure=conf.is_secure,
-                port=conf.port,
-                host=conf.host,
+            is_secure=cfg.getboolean(section, 'is_secure'),
+            port=port,
+            host=cfg.get(section, 'host'),
             # TODO test vhost calling format
-                calling_format=conf.calling_format,
+            calling_format=calling_format,
             )
-
-            temp_targetConn = TargetConnection(conf, conn)
-            targets[name].add(k, temp_targetConn)
-
-            # Explicitly test for and set the default region, if specified.
-            # If it was not specified, use the 'is_master' flag to set it.
-            if default_region:
-                if default_region == name:
-                    targets[name].set_default(temp_targetConn)
-            elif conf.is_master:
-                targets[name].set_default(temp_targetConn)
-
-        s3[name] = targets[name].default.connection
+        s3[name] = conn
 
     # WARNING! we actively delete all buckets we see with the prefix
     # we've chosen! Choose your prefix with care, and don't reuse
@@ -371,15 +160,6 @@ def teardown():
     # remove our buckets here also, to avoid littering
     nuke_prefixed_buckets(prefix=prefix)
 
-@pytest.fixture(scope="package")
-def configfile():
-    setup()
-    yield config
-
-@pytest.fixture(autouse=True)
-def setup_teardown(configfile):
-    yield
-    teardown()
 
 bucket_counter = itertools.count(1)
 
@@ -399,100 +179,18 @@ def get_new_bucket_name():
     return name
 
 
-def get_new_bucket(target=None, name=None, headers=None):
+def get_new_bucket(connection=None):
     """
     Get a bucket that exists and is empty.
 
     Always recreates a bucket from scratch. This is useful to also
     reset ACLs and such.
     """
-    if target is None:
-        target = targets.main.default
-    connection = target.connection
-    if name is None:
+    if connection is None:
+        connection = s3.main
     name = get_new_bucket_name()
     # the only way for this to fail with a pre-existing bucket is if
     # someone raced us between setup nuke_prefixed_buckets and here;
     # ignore that as astronomically unlikely
-    bucket = connection.create_bucket(name, location=target.conf.api_name, headers=headers)
+    bucket = connection.create_bucket(name)
     return bucket
-
-def _make_request(method, bucket, key, body=None, authenticated=False, response_headers=None, request_headers=None, expires_in=100000, path_style=True, timeout=None):
-    """
-    issue a request for a specified method, on a specified <bucket,key>,
-    with a specified (optional) body (encrypted per the connection), and
-    return the response (status, reason).
-
-    If key is None, then this will be treated as a bucket-level request.
-
-    If the request or response headers are None, then default values will be
-    provided by later methods.
-    """
-    if not path_style:
-        conn = bucket.connection
-        request_headers['Host'] = conn.calling_format.build_host(conn.server_name(), bucket.name)
-
-    if authenticated:
-        urlobj = None
-        if key is not None:
-            urlobj = key
-        elif bucket is not None:
-            urlobj = bucket
-        else:
-            raise RuntimeError('Unable to find bucket name')
-        url = urlobj.generate_url(expires_in, method=method, response_headers=response_headers, headers=request_headers)
-        o = urlparse(url)
-        path = o.path + '?' + o.query
-    else:
-        bucketobj = None
-        if key is not None:
-            path = '/{obj}'.format(obj=key.name)
-            bucketobj = key.bucket
-        elif bucket is not None:
-            path = '/'
-            bucketobj = bucket
-        else:
-            raise RuntimeError('Unable to find bucket name')
-        if path_style:
-            path = '/{bucket}'.format(bucket=bucketobj.name) + path
-
-    return _make_raw_request(host=s3.main.host, port=s3.main.port, method=method, path=path, body=body, request_headers=request_headers, secure=s3.main.is_secure, timeout=timeout)
-
-def _make_bucket_request(method, bucket, body=None, authenticated=False, response_headers=None, request_headers=None, expires_in=100000, path_style=True, timeout=None):
-    """
-    issue a request for a specified method, on a specified <bucket>,
-    with a specified (optional) body (encrypted per the connection), and
-    return the response (status, reason)
-    """
-    return _make_request(method=method, bucket=bucket, key=None, body=body, authenticated=authenticated, response_headers=response_headers, request_headers=request_headers, expires_in=expires_in, path_style=path_style, timeout=timeout)
-
-def _make_raw_request(host, port, method, path, body=None, request_headers=None, secure=False, timeout=None):
-    """
-    issue a request to a specific host & port, for a specified method, on a
-    specified path with a specified (optional) body (encrypted per the
-    connection), and return the response (status, reason).
-
-    This allows construction of special cases not covered by the bucket/key to
-    URL mapping of _make_request/_make_bucket_request.
-    """
-    if secure:
-        class_ = HTTPSConnection
-    else:
-        class_ = HTTPConnection
-
-    if request_headers is None:
-        request_headers = {}
-
-    c = class_(host, port=port, timeout=timeout)
-
-    # TODO: We might have to modify this in future if we need to interact with
-    # how httplib.request handles Accept-Encoding and Host.
-    c.request(method, path, body=body, headers=request_headers)
-
-    res = c.getresponse()
-    #c.close()
-
-    print(res.status, res.reason)
-    return res
-
-

s3tests/functional/policy.py

@@ -1,46 +0,0 @@
-import json
-
-class Statement(object):
-    def __init__(self, action, resource, principal = {"AWS" : "*"}, effect= "Allow", condition = None):
-        self.principal = principal
-        self.action = action
-        self.resource = resource
-        self.condition = condition
-        self.effect = effect
-
-    def to_dict(self):
-        d = { "Action" : self.action,
-              "Principal" : self.principal,
-              "Effect" : self.effect,
-              "Resource" : self.resource
-        }
-
-        if self.condition is not None:
-            d["Condition"] = self.condition
-
-        return d
-
-class Policy(object):
-    def __init__(self):
-        self.statements = []
-
-    def add_statement(self, s):
-        self.statements.append(s)
-        return self
-
-    def to_json(self):
-        policy_dict = {
-            "Version" : "2012-10-17",
-            "Statement":
-            [s.to_dict() for s in self.statements]
-        }
-
-        return json.dumps(policy_dict)
-
-def make_json_policy(action, resource, principal={"AWS": "*"}, conditions=None):
-    """
-    Helper function to make single statement policies
-    """
-    s = Statement(action, resource, principal, condition=conditions)
-    p = Policy()
-    return p.add_statement(s).to_json()

s3tests/functional/test_utils.py

@@ -1,9 +0,0 @@
-from . import utils
-
-def test_generate():
-    FIVE_MB = 5 * 1024 * 1024
-    assert len(''.join(utils.generate_random(0))) == 0
-    assert len(''.join(utils.generate_random(1))) == 1
-    assert len(''.join(utils.generate_random(FIVE_MB - 1))) == FIVE_MB - 1
-    assert len(''.join(utils.generate_random(FIVE_MB))) == FIVE_MB
-    assert len(''.join(utils.generate_random(FIVE_MB + 1))) == FIVE_MB + 1

s3tests/functional/utils.py

@@ -1,8 +1,3 @@
-import random
-import requests
-import string
-import time
-
 def assert_raises(excClass, callableObj, *args, **kwargs):
     """
     Like unittest.TestCase.assertRaises, but returns the exception.
@@ -17,45 +12,3 @@ def assert_raises(excClass, callableObj, *args, **kwargs):
         else:
             excName = str(excClass)
         raise AssertionError("%s not raised" % excName)
-
-def generate_random(size, part_size=5*1024*1024):
-    """
-    Generate the specified number random data.
-    (actually each MB is a repetition of the first KB)
-    """
-    chunk = 1024
-    allowed = string.ascii_letters
-    for x in range(0, size, part_size):
-        strpart = ''.join([allowed[random.randint(0, len(allowed) - 1)] for _ in range(chunk)])
-        s = ''
-        left = size - x
-        this_part_size = min(left, part_size)
-        for y in range(this_part_size // chunk):
-            s = s + strpart
-        s = s + strpart[:(this_part_size % chunk)]
-        yield s
-        if (x == size):
-            return
-
-# syncs all the regions except for the one passed in
-def region_sync_meta(targets, region):
-
-    for (k, r) in targets.items():
-        if r == region:
-            continue
-        conf = r.conf
-        if conf.sync_agent_addr:
-            ret = requests.post('http://{addr}:{port}/metadata/incremental'.format(addr = conf.sync_agent_addr, port = conf.sync_agent_port))
-            assert ret.status_code == 200
-        if conf.sync_meta_wait:
-            time.sleep(conf.sync_meta_wait)
-
-
-def get_grantee(policy, permission):
-    '''
-    Given an object/bucket policy, extract the grantee with the required permission
-    '''
-
-    for g in policy.acl.grants:
-        if g.permission == permission:
-            return g.id

s3tests/fuzz/headers.py

@@ -0,0 +1,376 @@
+from boto.s3.connection import S3Connection
+from boto.exception import BotoServerError
+from boto.s3.key import Key
+from httplib import BadStatusLine
+from optparse import OptionParser
+from .. import common
+
+import traceback
+import itertools
+import random
+import string
+import struct
+import yaml
+import sys
+import re
+
+
+class DecisionGraphError(Exception):
+    """ Raised when a node in a graph tries to set a header or
+        key that was previously set by another node
+    """
+    def __init__(self, value):
+        self.value = value
+
+    def __str__(self):
+        return repr(self.value)
+
+
+class RecursionError(Exception):
+    """Runaway recursion in string formatting"""
+
+    def __init__(self, msg):
+        self.msg = msg
+
+    def __str__(self):
+        return '{0.__doc__}: {0.msg!r}'.format(self)
+
+
+def assemble_decision(decision_graph, prng):
+    """ Take in a graph describing the possible decision space and a random
+        number generator and traverse the graph to build a decision
+    """
+    return descend_graph(decision_graph, 'start', prng)
+
+
+def descend_graph(decision_graph, node_name, prng):
+    """ Given a graph and a particular node in that graph, set the values in
+        the node's "set" list, pick a choice from the "choice" list, and
+        recurse.  Finally, return dictionary of values
+    """
+    node = decision_graph[node_name]
+
+    try:
+        choice = make_choice(node['choices'], prng)
+        if choice == '':
+            decision = {}
+        else:
+            decision = descend_graph(decision_graph, choice, prng)
+    except IndexError:
+        decision = {}
+
+    for key, choices in node['set'].iteritems():
+        if key in decision:
+            raise DecisionGraphError("Node %s tried to set '%s', but that key was already set by a lower node!" %(node_name, key))
+        decision[key] = make_choice(choices, prng)
+
+    if 'headers' in node:
+        decision.setdefault('headers', [])
+
+        for desc in node['headers']:
+            try:
+                (repetition_range, header, value) = desc
+            except ValueError:
+                (header, value) = desc
+                repetition_range = '1'
+
+            try:
+                size_min, size_max = repetition_range.split('-', 1)
+            except ValueError:
+                size_min = size_max = repetition_range
+
+            size_min = int(size_min)
+            size_max = int(size_max)
+
+            num_reps = prng.randint(size_min, size_max)
+            if header in [h for h, v in decision['headers']]:
+                    raise DecisionGraphError("Node %s tried to add header '%s', but that header already exists!" %(node_name, header))
+            for _ in xrange(num_reps):
+                decision['headers'].append([header, value])
+
+    return decision
+
+
+def make_choice(choices, prng):
+    """ Given a list of (possibly weighted) options or just a single option!,
+        choose one of the options taking weights into account and return the
+        choice
+    """
+    if isinstance(choices, str):
+        return choices
+    weighted_choices = []
+    for option in choices:
+        if option is None:
+            weighted_choices.append('')
+            continue
+        try:
+            (weight, value) = option.split(None, 1)
+            weight = int(weight)
+        except ValueError:
+            weight = 1
+            value = option
+
+        if value == 'null' or value == 'None':
+            value = ''
+
+        for _ in xrange(weight):
+            weighted_choices.append(value)
+
+    return prng.choice(weighted_choices)
+
+
+def expand_headers(decision, prng):
+    expanded_headers = {} 
+    for header in decision['headers']:
+        h = expand(decision, header[0], prng)
+        v = expand(decision, header[1], prng)
+        expanded_headers[h] = v
+    return expanded_headers
+
+
+def expand(decision, value, prng):
+    c = itertools.count()
+    fmt = RepeatExpandingFormatter(prng)
+    new = fmt.vformat(value, [], decision)
+    return new
+
+
+class RepeatExpandingFormatter(string.Formatter):
+    charsets = {
+        'printable_no_whitespace': string.printable.translate(None, string.whitespace),
+        'printable': string.printable,
+        'punctuation': string.punctuation,
+        'whitespace': string.whitespace,
+        'digits': string.digits
+    }
+
+    def __init__(self, prng, _recursion=0):
+        super(RepeatExpandingFormatter, self).__init__()
+        # this class assumes it is always instantiated once per
+        # formatting; use that to detect runaway recursion
+        self.prng = prng
+        self._recursion = _recursion
+
+    def get_value(self, key, args, kwargs):
+        fields = key.split(None, 1)
+        fn = getattr(self, 'special_{name}'.format(name=fields[0]), None)
+        if fn is not None:
+            if len(fields) == 1:
+                fields.append('')
+            return fn(fields[1])
+
+        val = super(RepeatExpandingFormatter, self).get_value(key, args, kwargs)
+        if self._recursion > 5:
+            raise RecursionError(key)
+        fmt = self.__class__(self.prng, _recursion=self._recursion+1)
+
+        n = fmt.vformat(val, args, kwargs)
+        return n
+
+    def special_random(self, args):
+        arg_list = args.split()
+        try:
+            size_min, size_max = arg_list[0].split('-', 1)
+        except ValueError:
+            size_min = size_max = arg_list[0]
+        except IndexError:
+            size_min = '0'
+            size_max = '1000'
+
+        size_min = int(size_min)
+        size_max = int(size_max)
+        length = self.prng.randint(size_min, size_max)
+
+        try:
+            charset_arg = arg_list[1]
+        except IndexError:
+            charset_arg = 'printable'
+
+        if charset_arg == 'binary' or charset_arg == 'binary_no_whitespace':
+            num_bytes = length + 8
+            tmplist = [self.prng.getrandbits(64) for _ in xrange(num_bytes / 8)]
+            tmpstring = struct.pack((num_bytes / 8) * 'Q', *tmplist)
+            if charset_arg == 'binary_no_whitespace':
+                tmpstring = ''.join(c for c in tmpstring if c not in string.whitespace)
+            return tmpstring[0:length]
+        else:
+            charset = self.charsets[charset_arg]
+            return ''.join([self.prng.choice(charset) for _ in xrange(length)]) # Won't scale nicely
+
+
+def parse_options():
+    parser = OptionParser()
+    parser.add_option('-O', '--outfile', help='write output to FILE. Defaults to STDOUT', metavar='FILE')
+    parser.add_option('--seed', dest='seed', type='int',  help='initial seed for the random number generator')
+    parser.add_option('--seed-file', dest='seedfile', help='read seeds for specific requests from FILE', metavar='FILE')
+    parser.add_option('-n', dest='num_requests', type='int',  help='issue NUM requests before stopping', metavar='NUM')
+    parser.add_option('-v', '--verbose', dest='verbose', action="store_true",  help='turn on verbose output')
+    parser.add_option('-d', '--debug', dest='debug', action="store_true",  help='turn on debugging (very verbose) output')
+    parser.add_option('--decision-graph', dest='graph_filename',  help='file in which to find the request decision graph')
+    parser.add_option('--no-cleanup', dest='cleanup', action="store_false", help='turn off teardown so you can peruse the state of buckets after testing')
+
+    parser.set_defaults(num_requests=5)
+    parser.set_defaults(cleanup=True)
+    parser.set_defaults(graph_filename='request_decision_graph.yml')
+    return parser.parse_args()
+
+
+def randomlist(seed=None):
+    """ Returns an infinite generator of random numbers
+    """
+    rng = random.Random(seed)
+    while True:
+        yield rng.randint(0,100000) #100,000 seeds is enough, right?
+
+
+def populate_buckets(conn, alt):
+    """ Creates buckets and keys for fuzz testing and sets appropriate
+        permissions. Returns a dictionary of the bucket and key names.
+    """
+    breadable = common.get_new_bucket(alt)
+    bwritable = common.get_new_bucket(alt)
+    bnonreadable = common.get_new_bucket(alt)
+
+    oreadable = Key(breadable)
+    owritable = Key(bwritable)
+    ononreadable = Key(breadable)
+    oreadable.set_contents_from_string('oreadable body')
+    owritable.set_contents_from_string('owritable body')
+    ononreadable.set_contents_from_string('ononreadable body')
+
+    breadable.set_acl('public-read')
+    bwritable.set_acl('public-read-write')
+    bnonreadable.set_acl('private')
+    oreadable.set_acl('public-read')
+    owritable.set_acl('public-read-write')
+    ononreadable.set_acl('private')
+
+    return dict(
+        bucket_readable=breadable.name,
+        bucket_writable=bwritable.name,
+        bucket_not_readable=bnonreadable.name,
+        bucket_not_writable=breadable.name,
+        object_readable=oreadable.key,
+        object_writable=owritable.key,
+        object_not_readable=ononreadable.key,
+        object_not_writable=oreadable.key,
+    )
+
+
+def _main():
+    """ The main script
+    """
+    (options, args) = parse_options()
+    random.seed(options.seed if options.seed else None)
+    s3_connection = common.s3.main
+    alt_connection = common.s3.alt
+
+    if options.outfile:
+        OUT = open(options.outfile, 'w')
+    else:
+        OUT = sys.stderr
+
+    VERBOSE = DEBUG = open('/dev/null', 'w')
+    if options.verbose:
+        VERBOSE = OUT
+    if options.debug:
+        DEBUG = OUT
+        VERBOSE = OUT
+
+    request_seeds = None
+    if options.seedfile:
+        FH = open(options.seedfile, 'r')
+        request_seeds = [int(line) for line in FH if line != '\n']
+        print>>OUT, 'Seedfile: %s' %options.seedfile
+        print>>OUT, 'Number of requests: %d' %len(request_seeds)
+    else:
+        if options.seed:
+            print>>OUT, 'Initial Seed: %d' %options.seed
+        print>>OUT, 'Number of requests: %d' %options.num_requests
+        random_list = randomlist(options.seed)
+        request_seeds = itertools.islice(random_list, options.num_requests)
+
+    print>>OUT, 'Decision Graph: %s' %options.graph_filename
+
+    graph_file = open(options.graph_filename, 'r')
+    decision_graph = yaml.safe_load(graph_file)
+
+    constants = populate_buckets(s3_connection, alt_connection)
+    print>>VERBOSE, "Test Buckets/Objects:"
+    for key, value in constants.iteritems():
+        print>>VERBOSE, "\t%s: %s" %(key, value)
+
+    print>>OUT, "Begin Fuzzing..."
+    print>>VERBOSE, '='*80
+    for request_seed in request_seeds:
+        print>>VERBOSE, 'Seed is: %r' %request_seed
+        prng = random.Random(request_seed)
+        decision = assemble_decision(decision_graph, prng)
+        decision.update(constants)
+
+        method = expand(decision, decision['method'], prng)
+        path = expand(decision, decision['urlpath'], prng)
+
+        try:
+            body = expand(decision, decision['body'], prng)
+        except KeyError:
+            body = ''
+
+        try:
+            headers = expand_headers(decision, prng)
+        except KeyError:
+            headers = {}
+
+        print>>VERBOSE, "%r %r" %(method[:100], path[:100])
+        for h, v in headers.iteritems():
+            print>>VERBOSE, "%r: %r" %(h[:50], v[:50])
+        print>>VERBOSE, "%r\n" % body[:100]
+
+        print>>DEBUG, 'FULL REQUEST'
+        print>>DEBUG, 'Method: %r' %method
+        print>>DEBUG, 'Path: %r' %path
+        print>>DEBUG, 'Headers:'
+        for h, v in headers.iteritems():
+            print>>DEBUG, "\t%r: %r" %(h, v)
+        print>>DEBUG, 'Body: %r\n' %body
+
+        failed = False # Let's be optimistic, shall we?
+        try:
+            response = s3_connection.make_request(method, path, data=body, headers=headers, override_num_retries=1)
+            body = response.read()
+        except BotoServerError, e:
+            response = e
+            body = e.body
+            failed = True
+        except BadStatusLine, e:
+            print>>OUT, 'FAILED: failed to parse response (BadStatusLine); probably a NUL byte in your request?'
+            print>>VERBOSE, '='*80
+            continue
+
+        if failed:
+            print>>OUT, 'FAILED:'
+            OLD_VERBOSE = VERBOSE
+            OLD_DEBUG = DEBUG
+            VERBOSE = DEBUG = OUT
+        print>>VERBOSE, 'Seed was: %r' %request_seed
+        print>>VERBOSE, 'Response status code: %d %s' %(response.status, response.reason)
+        print>>DEBUG, 'Body:\n%s' %body
+        print>>VERBOSE, '='*80
+        if failed:
+            VERBOSE = OLD_VERBOSE
+            DEBUG = OLD_DEBUG
+
+    print>>OUT, '...done fuzzing'
+
+    if options.cleanup:
+        common.teardown()
+
+
+def main():
+    common.setup()
+    try:
+        _main()
+    except Exception as e:
+        traceback.print_exc()
+        common.teardown()
+

s3tests/fuzz/test/test_fuzzer.py

@@ -0,0 +1,403 @@
+"""
+Unit-test suite for the S3 fuzzer
+
+The fuzzer is a grammar-based random S3 operation generator
+that produces random operation sequences in an effort to
+crash the server.  This unit-test suite does not test
+S3 servers, but rather the fuzzer infrastructure.
+
+It works by running the fuzzer off of a simple grammar,
+and checking the producted requests to ensure that they
+include the expected sorts of operations in the expected
+proportions.
+"""
+import sys
+import itertools
+import nose
+import random
+import string
+import yaml
+
+from ..headers import *
+
+from nose.tools import eq_ as eq
+from nose.tools import assert_true
+from nose.plugins.attrib import attr
+
+from ...functional.utils import assert_raises
+
+_decision_graph = {}
+
+def check_access_denied(fn, *args, **kwargs):
+    e = assert_raises(boto.exception.S3ResponseError, fn, *args, **kwargs)
+    eq(e.status, 403)
+    eq(e.reason, 'Forbidden')
+    eq(e.error_code, 'AccessDenied')
+
+
+def build_graph():
+    graph = {}
+    graph['start'] = {
+        'set': {},
+        'choices': ['node2']
+    }
+    graph['leaf'] = {
+        'set': {
+            'key1': 'value1',
+            'key2': 'value2'
+        },
+        'headers': [
+            ['1-2', 'random-header-{random 5-10 printable}', '{random 20-30 punctuation}']
+        ],
+        'choices': []
+    }
+    graph['node1'] = {
+        'set': {
+            'key3': 'value3',
+            'header_val': [
+                '3 h1',
+                '2 h2',
+                'h3'
+            ]
+        },
+        'headers': [
+            ['1-1', 'my-header', '{header_val}'],
+        ],
+        'choices': ['leaf']
+    }
+    graph['node2'] = {
+        'set': {
+            'randkey': 'value-{random 10-15 printable}',
+            'path': '/{bucket_readable}',
+            'indirect_key1': '{key1}'
+        },
+        'choices': ['leaf']
+    }
+    graph['bad_node'] = {
+        'set': {
+            'key1': 'value1'
+        },
+        'choices': ['leaf']
+    }
+    graph['nonexistant_child_node'] = {
+        'set': {},
+        'choices': ['leafy_greens']
+    }
+    graph['weighted_node'] = {
+        'set': {
+            'k1': [
+                'foo',
+                '2 bar',
+                '1 baz'
+            ]
+        },
+        'choices': [
+            'foo',
+            '2 bar',
+            '1 baz'
+        ]
+    }
+    graph['null_choice_node'] = {
+        'set': {},
+        'choices': [None]
+    }
+    graph['repeated_headers_node'] = {
+        'set': {},
+        'headers': [
+            ['1-2', 'random-header-{random 5-10 printable}', '{random 20-30 punctuation}']
+        ],
+        'choices': ['leaf']
+    }
+    graph['weighted_null_choice_node'] = {
+        'set': {},
+        'choices': ['3 null']
+    }
+    return graph
+
+
+#def test_foo():
+    #graph_file = open('request_decision_graph.yml', 'r')
+    #graph = yaml.safe_load(graph_file)
+    #eq(graph['bucket_put_simple']['set']['grantee'], 0)
+
+
+def test_load_graph():
+    graph_file = open('request_decision_graph.yml', 'r')
+    graph = yaml.safe_load(graph_file)
+    graph['start']
+
+
+def test_descend_leaf_node():
+    graph = build_graph()
+    prng = random.Random(1)
+    decision = descend_graph(graph, 'leaf', prng)
+
+    eq(decision['key1'], 'value1')
+    eq(decision['key2'], 'value2')
+    e = assert_raises(KeyError, lambda x: decision[x], 'key3')
+
+
+def test_descend_node():
+    graph = build_graph()
+    prng = random.Random(1)
+    decision = descend_graph(graph, 'node1', prng)
+
+    eq(decision['key1'], 'value1')
+    eq(decision['key2'], 'value2')
+    eq(decision['key3'], 'value3')
+
+
+def test_descend_bad_node():
+    graph = build_graph()
+    prng = random.Random(1)
+    assert_raises(DecisionGraphError, descend_graph, graph, 'bad_node', prng)
+
+
+def test_descend_nonexistant_child():
+    graph = build_graph()
+    prng = random.Random(1)
+    assert_raises(KeyError, descend_graph, graph, 'nonexistant_child_node', prng)
+
+
+def test_expand_random_printable():
+    prng = random.Random(1)
+    got = expand({}, '{random 10-15 printable}', prng)
+    eq(got, '[/pNI$;92@')
+
+
+def test_expand_random_binary():
+    prng = random.Random(1)
+    got = expand({}, '{random 10-15 binary}', prng)
+    eq(got, '\xdfj\xf1\xd80>a\xcd\xc4\xbb')
+
+
+def test_expand_random_printable_no_whitespace():
+    prng = random.Random(1)
+    for _ in xrange(1000):
+        got = expand({}, '{random 500 printable_no_whitespace}', prng)
+        assert_true(reduce(lambda x, y: x and y, [x not in string.whitespace and x in string.printable for x in got]))
+
+
+def test_expand_random_binary():
+    prng = random.Random(1)
+    for _ in xrange(1000):
+        got = expand({}, '{random 500 binary_no_whitespace}', prng)
+        assert_true(reduce(lambda x, y: x and y, [x not in string.whitespace for x in got]))
+
+
+def test_expand_random_no_args():
+    prng = random.Random(1)
+    for _ in xrange(1000):
+        got = expand({}, '{random}', prng)
+        assert_true(0 <= len(got) <= 1000)
+        assert_true(reduce(lambda x, y: x and y, [x in string.printable for x in got]))
+
+
+def test_expand_random_no_charset():
+    prng = random.Random(1)
+    for _ in xrange(1000):
+        got = expand({}, '{random 10-30}', prng)
+        assert_true(10 <= len(got) <= 30)
+        assert_true(reduce(lambda x, y: x and y, [x in string.printable for x in got]))
+
+
+def test_expand_random_exact_length():
+    prng = random.Random(1)
+    for _ in xrange(1000):
+        got = expand({}, '{random 10 digits}', prng)
+        assert_true(len(got) == 10)
+        assert_true(reduce(lambda x, y: x and y, [x in string.digits for x in got]))
+
+
+def test_expand_random_bad_charset():
+    prng = random.Random(1)
+    assert_raises(KeyError, expand, {}, '{random 10-30 foo}', prng)
+
+
+def test_expand_random_missing_length():
+    prng = random.Random(1)
+    assert_raises(ValueError, expand, {}, '{random printable}', prng)
+
+
+def test_assemble_decision():
+    graph = build_graph()
+    prng = random.Random(1)
+    decision = assemble_decision(graph, prng)
+
+    eq(decision['key1'], 'value1')
+    eq(decision['key2'], 'value2')
+    eq(decision['randkey'], 'value-{random 10-15 printable}')
+    eq(decision['indirect_key1'], '{key1}')
+    eq(decision['path'], '/{bucket_readable}')
+    assert_raises(KeyError, lambda x: decision[x], 'key3')
+
+
+def test_expand_escape():
+    prng = random.Random(1)
+    decision = dict(
+        foo='{{bar}}',
+        )
+    got = expand(decision, '{foo}', prng)
+    eq(got, '{bar}')
+
+
+def test_expand_indirect():
+    prng = random.Random(1)
+    decision = dict(
+        foo='{bar}',
+        bar='quux',
+        )
+    got = expand(decision, '{foo}', prng)
+    eq(got, 'quux')
+
+
+def test_expand_indirect_double():
+    prng = random.Random(1)
+    decision = dict(
+        foo='{bar}',
+        bar='{quux}',
+        quux='thud',
+        )
+    got = expand(decision, '{foo}', prng)
+    eq(got, 'thud')
+
+
+def test_expand_recursive():
+    prng = random.Random(1)
+    decision = dict(
+        foo='{foo}',
+        )
+    e = assert_raises(RecursionError, expand, decision, '{foo}', prng)
+    eq(str(e), "Runaway recursion in string formatting: 'foo'")
+
+
+def test_expand_recursive_mutual():
+    prng = random.Random(1)
+    decision = dict(
+        foo='{bar}',
+        bar='{foo}',
+        )
+    e = assert_raises(RecursionError, expand, decision, '{foo}', prng)
+    eq(str(e), "Runaway recursion in string formatting: 'foo'")
+
+
+def test_expand_recursive_not_too_eager():
+    prng = random.Random(1)
+    decision = dict(
+        foo='bar',
+        )
+    got = expand(decision, 100*'{foo}', prng)
+    eq(got, 100*'bar')
+
+
+def test_make_choice_unweighted_with_space():
+    prng = random.Random(1)
+    choice = make_choice(['foo bar'], prng)
+    eq(choice, 'foo bar')
+
+def test_weighted_choices():
+    graph = build_graph()
+    prng = random.Random(1)
+
+    choices_made = {}
+    for _ in xrange(1000):
+        choice = make_choice(graph['weighted_node']['choices'], prng)
+        if choices_made.has_key(choice):
+            choices_made[choice] += 1
+        else:
+            choices_made[choice] = 1
+
+    foo_percentage = choices_made['foo'] / 1000.0
+    bar_percentage = choices_made['bar'] / 1000.0
+    baz_percentage = choices_made['baz'] / 1000.0
+    nose.tools.assert_almost_equal(foo_percentage, 0.25, 1)
+    nose.tools.assert_almost_equal(bar_percentage, 0.50, 1)
+    nose.tools.assert_almost_equal(baz_percentage, 0.25, 1)
+
+
+def test_null_choices():
+    graph = build_graph()
+    prng = random.Random(1)
+    choice = make_choice(graph['null_choice_node']['choices'], prng)
+
+    eq(choice, '')
+
+
+def test_weighted_null_choices():
+    graph = build_graph()
+    prng = random.Random(1)
+    choice = make_choice(graph['weighted_null_choice_node']['choices'], prng)
+
+    eq(choice, '')
+
+
+def test_null_child():
+    graph = build_graph()
+    prng = random.Random(1)
+    decision = descend_graph(graph, 'null_choice_node', prng)
+
+    eq(decision, {})
+
+
+def test_weighted_set():
+    graph = build_graph()
+    prng = random.Random(1)
+
+    choices_made = {}
+    for _ in xrange(1000):
+        choice = make_choice(graph['weighted_node']['set']['k1'], prng)
+        if choices_made.has_key(choice):
+            choices_made[choice] += 1
+        else:
+            choices_made[choice] = 1
+
+    foo_percentage = choices_made['foo'] / 1000.0
+    bar_percentage = choices_made['bar'] / 1000.0
+    baz_percentage = choices_made['baz'] / 1000.0
+    nose.tools.assert_almost_equal(foo_percentage, 0.25, 1)
+    nose.tools.assert_almost_equal(bar_percentage, 0.50, 1)
+    nose.tools.assert_almost_equal(baz_percentage, 0.25, 1)
+
+
+def test_header_presence():
+    graph = build_graph()
+    prng = random.Random(1)
+    decision = descend_graph(graph, 'node1', prng)
+
+    c1 = itertools.count()
+    c2 = itertools.count()
+    for header, value in decision['headers']:
+        if header == 'my-header':
+            eq(value, '{header_val}')
+            assert_true(next(c1) < 1)
+        elif header == 'random-header-{random 5-10 printable}':
+            eq(value, '{random 20-30 punctuation}')
+            assert_true(next(c2) < 2)
+        else:
+            raise KeyError('unexpected header found: %s' % header)
+
+    assert_true(next(c1))
+    assert_true(next(c2))
+
+
+def test_duplicate_header():
+    graph = build_graph()
+    prng = random.Random(1)
+    assert_raises(DecisionGraphError, descend_graph, graph, 'repeated_headers_node', prng)
+
+
+def test_expand_headers():
+    graph = build_graph()
+    prng = random.Random(1)
+    decision = descend_graph(graph, 'node1', prng)
+    expanded_headers = expand_headers(decision, prng)
+
+    for header, value in expanded_headers.iteritems():
+        if header == 'my-header':
+            assert_true(value in ['h1', 'h2', 'h3'])
+        elif header.startswith('random-header-'):
+            assert_true(20 <= len(value) <= 30)
+            assert_true(string.strip(value, RepeatExpandingFormatter.charsets['punctuation']) is '')
+        else:
+            raise DecisionGraphError('unexpected header found: "%s"' % header)
+

s3tests/generate_objects.py

@@ -0,0 +1,117 @@
+from boto.s3.key import Key
+from optparse import OptionParser
+from . import realistic
+import traceback
+import random
+from . import common
+import sys
+
+
+def parse_opts():
+    parser = OptionParser()
+    parser.add_option('-O', '--outfile', help='write output to FILE. Defaults to STDOUT', metavar='FILE')
+    parser.add_option('-b', '--bucket', dest='bucket', help='push objects to BUCKET', metavar='BUCKET')
+    parser.add_option('--seed', dest='seed', help='optional seed for the random number generator')
+
+    return parser.parse_args()
+
+
+def get_random_files(quantity, mean, stddev, seed):
+    """Create file-like objects with pseudorandom contents.
+       IN:
+           number of files to create
+           mean file size in bytes
+           standard deviation from mean file size
+           seed for PRNG
+       OUT:
+           list of file handles
+    """
+    file_generator = realistic.files(mean, stddev, seed)
+    return [file_generator.next() for _ in xrange(quantity)]
+
+
+def upload_objects(bucket, files, seed):
+    """Upload a bunch of files to an S3 bucket
+       IN:
+         boto S3 bucket object
+         list of file handles to upload
+         seed for PRNG
+       OUT:
+         list of boto S3 key objects
+    """
+    keys = []
+    name_generator = realistic.names(15, 4, seed=seed)
+
+    for fp in files:
+        print >> sys.stderr, 'sending file with size %dB' % fp.size
+        key = Key(bucket)
+        key.key = name_generator.next()
+        key.set_contents_from_file(fp)
+        key.set_acl('public-read')
+        keys.append(key)
+
+    return keys
+
+
+def _main():
+    '''To run the static content load test, make sure you've bootstrapped your
+       test environment and set up your config.yaml file, then run the following:
+          S3TEST_CONF=config.yaml virtualenv/bin/s3tests-generate-objects.py --seed 1234
+
+        This creates a bucket with your S3 credentials (from config.yaml) and
+        fills it with garbage objects as described in the
+        file_generation.groups section of config.yaml.  It writes a list of
+        URLS to those objects to the file listed in file_generation.url_file
+        in config.yaml.
+
+        Once you have objcts in your bucket, run the siege benchmarking program:
+            siege --rc ./siege.conf -r 5
+
+        This tells siege to read the ./siege.conf config file which tells it to
+        use the urls in ./urls.txt and log to ./siege.log. It hits each url in
+        urls.txt 5 times (-r flag).
+
+        Results are printed to the terminal and written in CSV format to
+        ./siege.log
+    '''
+    (options, args) = parse_opts()
+
+    #SETUP
+    random.seed(options.seed if options.seed else None)
+    conn = common.s3.main
+
+    if options.outfile:
+        OUTFILE = open(options.outfile, 'w')
+    elif common.config.file_generation.url_file:
+        OUTFILE = open(common.config.file_generation.url_file, 'w')
+    else:
+        OUTFILE = sys.stdout
+
+    if options.bucket:
+        bucket = conn.create_bucket(options.bucket)
+    else:
+        bucket = common.get_new_bucket()
+
+    bucket.set_acl('public-read')
+    keys = []
+    print >> OUTFILE, 'bucket: %s' % bucket.name
+    print >> sys.stderr, 'setup complete, generating files'
+    for profile in common.config.file_generation.groups:
+        seed = random.random()
+        files = get_random_files(profile[0], profile[1], profile[2], seed)
+        keys += upload_objects(bucket, files, seed)
+
+    print >> sys.stderr, 'finished sending files. generating urls'
+    for key in keys:
+        print >> OUTFILE, key.generate_url(0, query_auth=False)
+
+    print >> sys.stderr, 'done'
+
+
+def main():
+    common.setup()
+    try:
+        _main()
+    except Exception as e:
+        traceback.print_exc()
+        common.teardown()

s3tests/readwrite.py

@@ -0,0 +1,230 @@
+import gevent
+import gevent.pool
+import gevent.queue
+import gevent.monkey; gevent.monkey.patch_all()
+import itertools
+import optparse
+import os
+import sys
+import time
+import traceback
+import random
+import yaml
+
+import realistic
+import common
+
+NANOSECOND = int(1e9)
+
+def reader(bucket, worker_id, file_names, queue, rand):
+    while True:
+        objname = rand.choice(file_names)
+        key = bucket.new_key(objname)
+
+        fp = realistic.FileVerifier()
+        result = dict(
+                type='r',
+                bucket=bucket.name,
+                key=key.name,
+                worker=worker_id,
+                )
+
+        start = time.time()
+        try:
+            key.get_contents_to_file(fp)
+        except gevent.GreenletExit:
+            raise
+        except Exception as e:
+            # stop timer ASAP, even on errors
+            end = time.time()
+            result.update(
+                error=dict(
+                    msg=str(e),
+                    traceback=traceback.format_exc(),
+                    ),
+                )
+            # certain kinds of programmer errors make this a busy
+            # loop; let parent greenlet get some time too
+            time.sleep(0)
+        else:
+            end = time.time()
+
+            if not fp.valid():
+                result.update(
+                    error=dict(
+                        msg='md5sum check failed',
+                        ),
+                    )
+
+        elapsed = end - start
+        result.update(
+            start=start,
+            duration=int(round(elapsed * NANOSECOND)),
+            chunks=fp.chunks,
+            )
+        queue.put(result)
+
+def writer(bucket, worker_id, file_names, files, queue, rand):
+    while True:
+        fp = next(files)
+        objname = rand.choice(file_names)
+        key = bucket.new_key(objname)
+
+        result = dict(
+            type='w',
+            bucket=bucket.name,
+            key=key.name,
+            worker=worker_id,
+            )
+
+        start = time.time()
+        try:
+            key.set_contents_from_file(fp)
+        except gevent.GreenletExit:
+            raise
+        except Exception as e:
+            # stop timer ASAP, even on errors
+            end = time.time()
+            result.update(
+                error=dict(
+                    msg=str(e),
+                    traceback=traceback.format_exc(),
+                    ),
+                )
+            # certain kinds of programmer errors make this a busy
+            # loop; let parent greenlet get some time too
+            time.sleep(0)
+        else:
+            end = time.time()
+
+        elapsed = end - start
+        result.update(
+            start=start,
+            duration=int(round(elapsed * NANOSECOND)),
+            chunks=fp.last_chunks,
+            )
+        queue.put(result)
+
+def parse_options():
+    parser = optparse.OptionParser(
+        usage='%prog [OPTS] <CONFIG_YAML',
+        )
+    parser.add_option("--no-cleanup", dest="cleanup", action="store_false",
+        help="skip cleaning up all created buckets", default=True)
+
+    return parser.parse_args()
+
+def write_file(bucket, file_name, fp):
+    """
+    Write a single file to the bucket using the file_name.
+    This is used during the warmup to initialize the files.
+    """
+    key = bucket.new_key(file_name)
+    key.set_contents_from_file(fp)
+
+def main():
+    # parse options
+    (options, args) = parse_options()
+
+    if os.isatty(sys.stdin.fileno()):
+        raise RuntimeError('Need configuration in stdin.')
+    config = common.read_config(sys.stdin)
+    conn = common.connect(config.s3)
+    bucket = None
+
+    try:
+        # setup
+        real_stdout = sys.stdout
+        sys.stdout = sys.stderr
+
+        # verify all required config items are present
+        if 'readwrite' not in config:
+            raise RuntimeError('readwrite section not found in config')
+        for item in ['readers', 'writers', 'duration', 'files', 'bucket']:
+            if item not in config.readwrite:
+                raise RuntimeError("Missing readwrite config item: {item}".format(item=item))
+        for item in ['num', 'size', 'stddev']:
+            if item not in config.readwrite.files:
+                raise RuntimeError("Missing readwrite config item: files.{item}".format(item=item))
+
+        seeds = dict(config.readwrite.get('random_seed', {}))
+        seeds.setdefault('main', random.randrange(2**32))
+
+        rand = random.Random(seeds['main'])
+
+        for name in ['names', 'contents', 'writer', 'reader']:
+            seeds.setdefault(name, rand.randrange(2**32))
+
+        print 'Using random seeds: {seeds}'.format(seeds=seeds)
+
+        # setup bucket and other objects
+        bucket_name = common.choose_bucket_prefix(config.readwrite.bucket, max_len=30)
+        bucket = conn.create_bucket(bucket_name)
+        print "Created bucket: {name}".format(name=bucket.name)
+        file_names = realistic.names(
+            mean=15,
+            stddev=4,
+            seed=seeds['names'],
+            )
+        file_names = itertools.islice(file_names, config.readwrite.files.num)
+        file_names = list(file_names)
+        files = realistic.files2(
+            mean=1024 * config.readwrite.files.size,
+            stddev=1024 * config.readwrite.files.stddev,
+            seed=seeds['contents'],
+            )
+        q = gevent.queue.Queue()
+
+        # warmup - get initial set of files uploaded
+        print "Uploading initial set of {num} files".format(num=config.readwrite.files.num)
+        warmup_pool = gevent.pool.Pool(size=100)
+        for file_name in file_names:
+            fp = next(files)
+            warmup_pool.spawn_link_exception(
+                write_file,
+                bucket=bucket,
+                file_name=file_name,
+                fp=fp,
+                )
+        warmup_pool.join()
+
+        # main work
+        print "Starting main worker loop."
+        print "Using file size: {size} +- {stddev}".format(size=config.readwrite.files.size, stddev=config.readwrite.files.stddev)
+        print "Spawning {w} writers and {r} readers...".format(w=config.readwrite.writers, r=config.readwrite.readers)
+        group = gevent.pool.Group()
+        rand_writer = random.Random(seeds['writer'])
+        for x in xrange(config.readwrite.writers):
+            this_rand = random.Random(rand_writer.randrange(2**32))
+            group.spawn_link_exception(
+                writer,
+                bucket=bucket,
+                worker_id=x,
+                file_names=file_names,
+                files=files,
+                queue=q,
+                rand=this_rand,
+                )
+        rand_reader = random.Random(seeds['reader'])
+        for x in xrange(config.readwrite.readers):
+            this_rand = random.Random(rand_reader.randrange(2**32))
+            group.spawn_link_exception(
+                reader,
+                bucket=bucket,
+                worker_id=x,
+                file_names=file_names,
+                queue=q,
+                rand=this_rand,
+                )
+        def stop():
+            group.kill(block=True)
+            q.put(StopIteration)
+        gevent.spawn_later(config.readwrite.duration, stop)
+
+        yaml.safe_dump_all(q, stream=real_stdout)
+
+    finally:
+        # cleanup
+        if options.cleanup:
+            if bucket is not None:
+                common.nuke_bucket(bucket)

s3tests/realistic.py

@@ -0,0 +1,222 @@
+import hashlib
+import random
+import string
+import struct
+import time
+import math
+import tempfile
+import shutil
+import os
+
+
+NANOSECOND = int(1e9)
+
+
+class RandomContentFile(object):
+    def __init__(self, size, seed):
+        self.size = size
+        self.seed = seed
+        self.random = random.Random(self.seed)
+
+        # Boto likes to seek once more after it's done reading, so we need to save the last chunks/seek value.
+        self.last_chunks = self.chunks = None
+        self.last_seek = None
+
+        # Let seek initialize the rest of it, rather than dup code
+        self.seek(0)
+
+    def _mark_chunk(self):
+        self.chunks.append([self.offset, int(round((time.time() - self.last_seek) * NANOSECOND))])
+
+    def seek(self, offset, whence=os.SEEK_SET):
+        if whence == os.SEEK_SET:
+            self.offset = offset
+        elif whence == os.SEEK_END:
+            self.offset = self.size + offset;
+        elif whence == os.SEEK_CUR:
+            self.offset += offset
+
+        assert self.offset == 0
+
+        self.random.seed(self.seed)
+        self.buffer = ''
+
+        self.hash = hashlib.md5()
+        self.digest_size = self.hash.digest_size
+        self.digest = None
+
+        # Save the last seek time as our start time, and the last chunks
+        self.last_chunks = self.chunks
+        # Before emptying.
+        self.last_seek = time.time()
+        self.chunks = []
+
+    def tell(self):
+        return self.offset
+
+    def _generate(self):
+        # generate and return a chunk of pseudorandom data
+        size = min(self.size, 1*1024*1024) # generate at most 1 MB at a time
+        chunks = int(math.ceil(size/8.0))  # number of 8-byte chunks to create
+
+        l = [self.random.getrandbits(64) for _ in xrange(chunks)]
+        s = struct.pack(chunks*'Q', *l)
+        return s
+
+    def read(self, size=-1):
+        if size < 0:
+            size = self.size - self.offset
+
+        r = []
+
+        random_count = min(size, self.size - self.offset - self.digest_size)
+        if random_count > 0:
+            while len(self.buffer) < random_count:
+                self.buffer += self._generate()
+            self.offset += random_count
+            size -= random_count
+            data, self.buffer = self.buffer[:random_count], self.buffer[random_count:]
+            if self.hash is not None:
+                self.hash.update(data)
+            r.append(data)
+
+        digest_count = min(size, self.size - self.offset)
+        if digest_count > 0:
+            if self.digest is None:
+                self.digest = self.hash.digest()
+                self.hash = None
+            self.offset += digest_count
+            size -= digest_count
+            data = self.digest[:digest_count]
+            r.append(data)
+
+        self._mark_chunk()
+
+        return ''.join(r)
+
+class PrecomputedContentFile(object):
+    def __init__(self, f):
+        self._file = tempfile.SpooledTemporaryFile()
+        f.seek(0)
+        shutil.copyfileobj(f, self._file)
+        
+        self.last_chunks = self.chunks = None
+        self.seek(0)
+
+    def seek(self, offset, whence=os.SEEK_SET):
+        self._file.seek(offset, whence)
+
+        if self.tell() == 0:
+            # only reset the chunks when seeking to the beginning
+            self.last_chunks = self.chunks
+            self.last_seek = time.time()
+            self.chunks = []
+
+    def tell(self):
+        return self._file.tell()
+
+    def read(self, size=-1):
+        data = self._file.read(size)
+        self._mark_chunk()
+        return data
+
+    def _mark_chunk(self):
+        elapsed = time.time() - self.last_seek
+        elapsed_nsec = int(round(elapsed * NANOSECOND))
+        self.chunks.append([self.tell(), elapsed_nsec])
+
+class FileVerifier(object):
+    def __init__(self):
+        self.size = 0
+        self.hash = hashlib.md5()
+        self.buf = ''
+        self.created_at = time.time()
+        self.chunks = []
+
+    def _mark_chunk(self):
+        self.chunks.append([self.size, int(round((time.time() - self.created_at) * NANOSECOND))])
+
+    def write(self, data):
+        self.size += len(data)
+        self.buf += data
+        digsz = -1*self.hash.digest_size
+        new_data, self.buf = self.buf[0:digsz], self.buf[digsz:]
+        self.hash.update(new_data)
+        self._mark_chunk()
+
+    def valid(self):
+        """
+        Returns True if this file looks valid. The file is valid if the end
+        of the file has the md5 digest for the first part of the file.
+        """
+        if self.size < self.hash.digest_size:
+            return self.hash.digest().startswith(self.buf)
+
+        return self.buf == self.hash.digest()
+
+def files(mean, stddev, seed=None):
+    """
+    Yields file-like objects with effectively random contents, where
+    the size of each file follows the normal distribution with `mean`
+    and `stddev`.
+
+    Beware, the file-likeness is very shallow. You can use boto's
+    `key.set_contents_from_file` to send these to S3, but they are not
+    full file objects.
+
+    The last 128 bits are the MD5 digest of the previous bytes, for
+    verifying round-trip data integrity. For example, if you
+    re-download the object and place the contents into a file called
+    ``foo``, the following should print two identical lines:
+
+      python -c 'import sys, hashlib; data=sys.stdin.read(); print hashlib.md5(data[:-16]).hexdigest(); print "".join("%02x" % ord(c) for c in data[-16:])' <foo
+
+    Except for objects shorter than 16 bytes, where the second line
+    will be proportionally shorter.
+    """
+    rand = random.Random(seed)
+    while True:
+        while True:
+            size = int(rand.normalvariate(mean, stddev))
+            if size >= 0:
+                break
+        yield RandomContentFile(size=size, seed=rand.getrandbits(32))
+
+def files2(mean, stddev, seed=None, numfiles=10):
+    """
+    Yields file objects with effectively random contents, where the
+    size of each file follows the normal distribution with `mean` and
+    `stddev`.
+
+    Rather than continuously generating new files, this pre-computes and
+    stores `numfiles` files and yields them in a loop.
+    """
+    # pre-compute all the files (and save with TemporaryFiles)
+    rand_files = files(mean, stddev, seed)
+    fs = []
+    for _ in xrange(numfiles):
+        f = next(rand_files)
+        t = tempfile.SpooledTemporaryFile()
+        shutil.copyfileobj(f, t)
+        fs.append(t)
+
+    while True:
+        for f in fs:
+            yield PrecomputedContentFile(f)
+
+def names(mean, stddev, charset=None, seed=None):
+    """
+    Yields strings that are somewhat plausible as file names, where
+    the lenght of each filename follows the normal distribution with
+    `mean` and `stddev`.
+    """
+    if charset is None:
+        charset = string.ascii_lowercase
+    rand = random.Random(seed)
+    while True:
+        while True:
+            length = int(rand.normalvariate(mean, stddev))
+            if length > 0:
+                break
+        name = ''.join(rand.choice(charset) for _ in xrange(length))
+        yield name

s3tests/roundtrip.py

@@ -0,0 +1,219 @@
+import gevent
+import gevent.pool
+import gevent.queue
+import gevent.monkey; gevent.monkey.patch_all()
+import itertools
+import optparse
+import os
+import sys
+import time
+import traceback
+import random
+import yaml
+
+import realistic
+import common
+
+NANOSECOND = int(1e9)
+
+def writer(bucket, objname, fp, queue):
+    key = bucket.new_key(objname)
+
+    result = dict(
+        type='w',
+        bucket=bucket.name,
+        key=key.name,
+        )
+
+    start = time.time()
+    try:
+        key.set_contents_from_file(fp)
+    except gevent.GreenletExit:
+        raise
+    except Exception as e:
+        # stop timer ASAP, even on errors
+        end = time.time()
+        result.update(
+            error=dict(
+                msg=str(e),
+                traceback=traceback.format_exc(),
+                ),
+            )
+        # certain kinds of programmer errors make this a busy
+        # loop; let parent greenlet get some time too
+        time.sleep(0)
+    else:
+        end = time.time()
+
+    elapsed = end - start
+    result.update(
+        start=start,
+        duration=int(round(elapsed * NANOSECOND)),
+        chunks=fp.last_chunks,
+        )
+    queue.put(result)
+
+
+def reader(bucket, objname, queue):
+    key = bucket.new_key(objname)
+
+    fp = realistic.FileVerifier()
+    result = dict(
+            type='r',
+            bucket=bucket.name,
+            key=key.name,
+            )
+
+    start = time.time()
+    try:
+        key.get_contents_to_file(fp)
+    except gevent.GreenletExit:
+        raise
+    except Exception as e:
+        # stop timer ASAP, even on errors
+        end = time.time()
+        result.update(
+            error=dict(
+                msg=str(e),
+                traceback=traceback.format_exc(),
+                ),
+            )
+        # certain kinds of programmer errors make this a busy
+        # loop; let parent greenlet get some time too
+        time.sleep(0)
+    else:
+        end = time.time()
+
+        if not fp.valid():
+            result.update(
+                error=dict(
+                    msg='md5sum check failed',
+                    ),
+                )
+
+    elapsed = end - start
+    result.update(
+        start=start,
+        duration=int(round(elapsed * NANOSECOND)),
+        chunks=fp.chunks,
+        )
+    queue.put(result)
+
+def parse_options():
+    parser = optparse.OptionParser(
+        usage='%prog [OPTS] <CONFIG_YAML',
+        )
+    parser.add_option("--no-cleanup", dest="cleanup", action="store_false",
+        help="skip cleaning up all created buckets", default=True)
+
+    return parser.parse_args()
+
+def main():
+    # parse options
+    (options, args) = parse_options()
+
+    if os.isatty(sys.stdin.fileno()):
+        raise RuntimeError('Need configuration in stdin.')
+    config = common.read_config(sys.stdin)
+    conn = common.connect(config.s3)
+    bucket = None
+
+    try:
+        # setup
+        real_stdout = sys.stdout
+        sys.stdout = sys.stderr
+
+        # verify all required config items are present
+        if 'roundtrip' not in config:
+            raise RuntimeError('roundtrip section not found in config')
+        for item in ['readers', 'writers', 'duration', 'files', 'bucket']:
+            if item not in config.roundtrip:
+                raise RuntimeError("Missing roundtrip config item: {item}".format(item=item))
+        for item in ['num', 'size', 'stddev']:
+            if item not in config.roundtrip.files:
+                raise RuntimeError("Missing roundtrip config item: files.{item}".format(item=item))
+
+        seeds = dict(config.roundtrip.get('random_seed', {}))
+        seeds.setdefault('main', random.randrange(2**32))
+
+        rand = random.Random(seeds['main'])
+
+        for name in ['names', 'contents', 'writer', 'reader']:
+            seeds.setdefault(name, rand.randrange(2**32))
+
+        print 'Using random seeds: {seeds}'.format(seeds=seeds)
+
+        # setup bucket and other objects
+        bucket_name = common.choose_bucket_prefix(config.roundtrip.bucket, max_len=30)
+        bucket = conn.create_bucket(bucket_name)
+        print "Created bucket: {name}".format(name=bucket.name)
+        objnames = realistic.names(
+            mean=15,
+            stddev=4,
+            seed=seeds['names'],
+            )
+        objnames = itertools.islice(objnames, config.roundtrip.files.num)
+        objnames = list(objnames)
+        files = realistic.files(
+            mean=1024 * config.roundtrip.files.size,
+            stddev=1024 * config.roundtrip.files.stddev,
+            seed=seeds['contents'],
+            )
+        q = gevent.queue.Queue()
+
+        logger_g = gevent.spawn_link_exception(yaml.safe_dump_all, q, stream=real_stdout)
+
+        print "Writing {num} objects with {w} workers...".format(
+            num=config.roundtrip.files.num,
+            w=config.roundtrip.writers,
+            )
+        pool = gevent.pool.Pool(size=config.roundtrip.writers)
+        start = time.time()
+        for objname in objnames:
+            fp = next(files)
+            pool.spawn_link_exception(
+                writer,
+                bucket=bucket,
+                objname=objname,
+                fp=fp,
+                queue=q,
+                )
+        pool.join()
+        stop = time.time()
+        elapsed = stop - start
+        q.put(dict(
+                type='write_done',
+                duration=int(round(elapsed * NANOSECOND)),
+                ))
+
+        print "Reading {num} objects with {w} workers...".format(
+            num=config.roundtrip.files.num,
+            w=config.roundtrip.readers,
+            )
+        # avoid accessing them in the same order as the writing
+        rand.shuffle(objnames)
+        pool = gevent.pool.Pool(size=config.roundtrip.readers)
+        start = time.time()
+        for objname in objnames:
+            pool.spawn_link_exception(
+                reader,
+                bucket=bucket,
+                objname=objname,
+                queue=q,
+                )
+        pool.join()
+        stop = time.time()
+        elapsed = stop - start
+        q.put(dict(
+                type='read_done',
+                duration=int(round(elapsed * NANOSECOND)),
+                ))
+
+        q.put(StopIteration)
+        logger_g.get()
+
+    finally:
+        # cleanup
+        if options.cleanup:
+            if bucket is not None:
+                common.nuke_bucket(bucket)

s3tests_boto3/common.py

@@ -1,301 +0,0 @@
-import boto.s3.connection
-import munch
-import itertools
-import os
-import random
-import string
-import yaml
-import re
-from lxml import etree
-
-from doctest import Example
-from lxml.doctestcompare import LXMLOutputChecker
-
-s3 = munch.Munch()
-config = munch.Munch()
-prefix = ''
-
-bucket_counter = itertools.count(1)
-key_counter = itertools.count(1)
-
-def choose_bucket_prefix(template, max_len=30):
-    """
-    Choose a prefix for our test buckets, so they're easy to identify.
-
-    Use template and feed it more and more random filler, until it's
-    as long as possible but still below max_len.
-    """
-    rand = ''.join(
-        random.choice(string.ascii_lowercase + string.digits)
-        for c in range(255)
-        )
-
-    while rand:
-        s = template.format(random=rand)
-        if len(s) <= max_len:
-            return s
-        rand = rand[:-1]
-
-    raise RuntimeError(
-        'Bucket prefix template is impossible to fulfill: {template!r}'.format(
-            template=template,
-            ),
-        )
-
-def nuke_bucket(bucket):
-    try:
-        bucket.set_canned_acl('private')
-        # TODO: deleted_cnt and the while loop is a work around for rgw
-        # not sending the
-        deleted_cnt = 1
-        while deleted_cnt:
-            deleted_cnt = 0
-            for key in bucket.list():
-                print('Cleaning bucket {bucket} key {key}'.format(
-                    bucket=bucket,
-                    key=key,
-                    ))
-                key.set_canned_acl('private')
-                key.delete()
-                deleted_cnt += 1
-        bucket.delete()
-    except boto.exception.S3ResponseError as e:
-        # TODO workaround for buggy rgw that fails to send
-        # error_code, remove
-        if (e.status == 403
-            and e.error_code is None
-            and e.body == ''):
-            e.error_code = 'AccessDenied'
-        if e.error_code != 'AccessDenied':
-            print('GOT UNWANTED ERROR', e.error_code)
-            raise
-        # seems like we're not the owner of the bucket; ignore
-        pass
-
-def nuke_prefixed_buckets():
-    for name, conn in list(s3.items()):
-        print('Cleaning buckets from connection {name}'.format(name=name))
-        for bucket in conn.get_all_buckets():
-            if bucket.name.startswith(prefix):
-                print('Cleaning bucket {bucket}'.format(bucket=bucket))
-                nuke_bucket(bucket)
-
-    print('Done with cleanup of test buckets.')
-
-def read_config(fp):
-    config = munch.Munch()
-    g = yaml.safe_load_all(fp)
-    for new in g:
-        config.update(munch.Munchify(new))
-    return config
-
-def connect(conf):
-    mapping = dict(
-        port='port',
-        host='host',
-        is_secure='is_secure',
-        access_key='aws_access_key_id',
-        secret_key='aws_secret_access_key',
-        )
-    kwargs = dict((mapping[k],v) for (k,v) in conf.items() if k in mapping)
-    #process calling_format argument
-    calling_formats = dict(
-        ordinary=boto.s3.connection.OrdinaryCallingFormat(),
-        subdomain=boto.s3.connection.SubdomainCallingFormat(),
-        vhost=boto.s3.connection.VHostCallingFormat(),
-        )
-    kwargs['calling_format'] = calling_formats['ordinary']
-    if 'calling_format' in conf:
-        raw_calling_format = conf['calling_format']
-        try:
-            kwargs['calling_format'] = calling_formats[raw_calling_format]
-        except KeyError:
-            raise RuntimeError(
-                'calling_format unknown: %r' % raw_calling_format
-                )
-    # TODO test vhost calling format
-    conn = boto.s3.connection.S3Connection(**kwargs)
-    return conn
-
-def setup():
-    global s3, config, prefix
-    s3.clear()
-    config.clear()
-
-    try:
-        path = os.environ['S3TEST_CONF']
-    except KeyError:
-        raise RuntimeError(
-            'To run tests, point environment '
-            + 'variable S3TEST_CONF to a config file.',
-            )
-    with file(path) as f:
-        config.update(read_config(f))
-
-    # These 3 should always be present.
-    if 's3' not in config:
-        raise RuntimeError('Your config file is missing the s3 section!')
-    if 'defaults' not in config.s3:
-        raise RuntimeError('Your config file is missing the s3.defaults section!')
-    if 'fixtures' not in config:
-        raise RuntimeError('Your config file is missing the fixtures section!')
-
-    template = config.fixtures.get('bucket prefix', 'test-{random}-')
-    prefix = choose_bucket_prefix(template=template)
-    if prefix == '':
-        raise RuntimeError("Empty Prefix! Aborting!")
-
-    defaults = config.s3.defaults
-    for section in list(config.s3.keys()):
-        if section == 'defaults':
-            continue
-
-        conf = {}
-        conf.update(defaults)
-        conf.update(config.s3[section])
-        conn = connect(conf)
-        s3[section] = conn
-
-    # WARNING! we actively delete all buckets we see with the prefix
-    # we've chosen! Choose your prefix with care, and don't reuse
-    # credentials!
-
-    # We also assume nobody else is going to use buckets with that
-    # prefix. This is racy but given enough randomness, should not
-    # really fail.
-    nuke_prefixed_buckets()
-
-def get_new_bucket(connection=None):
-    """
-    Get a bucket that exists and is empty.
-
-    Always recreates a bucket from scratch. This is useful to also
-    reset ACLs and such.
-    """
-    if connection is None:
-        connection = s3.main
-    name = '{prefix}{num}'.format(
-        prefix=prefix,
-        num=next(bucket_counter),
-        )
-    # the only way for this to fail with a pre-existing bucket is if
-    # someone raced us between setup nuke_prefixed_buckets and here;
-    # ignore that as astronomically unlikely
-    bucket = connection.create_bucket(name)
-    return bucket
-
-def teardown():
-    nuke_prefixed_buckets()
-
-def with_setup_kwargs(setup, teardown=None):
-    """Decorator to add setup and/or teardown methods to a test function::
-
-      @with_setup_args(setup, teardown)
-      def test_something():
-          " ... "
-
-    The setup function should return (kwargs) which will be passed to
-    test function, and teardown function.
-
-    Note that `with_setup_kwargs` is useful *only* for test functions, not for test
-    methods or inside of TestCase subclasses.
-    """
-    def decorate(func):
-        kwargs = {}
-
-        def test_wrapped(*args, **kwargs2):
-            k2 = kwargs.copy()
-            k2.update(kwargs2)
-            k2['testname'] = func.__name__
-            func(*args, **k2)
-
-        test_wrapped.__name__ = func.__name__
-
-        def setup_wrapped():
-            k = setup()
-            kwargs.update(k)
-            if hasattr(func, 'setup'):
-                func.setup()
-        test_wrapped.setup = setup_wrapped
-
-        if teardown:
-            def teardown_wrapped():
-                if hasattr(func, 'teardown'):
-                    func.teardown()
-                teardown(**kwargs)
-
-            test_wrapped.teardown = teardown_wrapped
-        else:
-            if hasattr(func, 'teardown'):
-                test_wrapped.teardown = func.teardown()
-        return test_wrapped
-    return decorate
-
-# Demo case for the above, when you run test_gen():
-# _test_gen will run twice,
-# with the following stderr printing
-# setup_func {'b': 2}
-# testcase ('1',) {'b': 2, 'testname': '_test_gen'}
-# teardown_func {'b': 2}
-# setup_func {'b': 2}
-# testcase () {'b': 2, 'testname': '_test_gen'}
-# teardown_func {'b': 2}
-# 
-#def setup_func():
-#    kwargs = {'b': 2}
-#    print("setup_func", kwargs, file=sys.stderr)
-#    return kwargs
-#
-#def teardown_func(**kwargs):
-#    print("teardown_func", kwargs, file=sys.stderr)
-#
-#@with_setup_kwargs(setup=setup_func, teardown=teardown_func)
-#def _test_gen(*args, **kwargs):
-#    print("testcase", args, kwargs, file=sys.stderr)
-#
-#def test_gen():
-#    yield _test_gen, '1'
-#    yield _test_gen
-
-def trim_xml(xml_str):
-    p = etree.XMLParser(remove_blank_text=True)
-    elem = etree.XML(xml_str, parser=p)
-    return etree.tostring(elem)
-
-def normalize_xml(xml, pretty_print=True):
-    if xml is None:
-        return xml
-
-    root = etree.fromstring(xml.encode(encoding='ascii'))
-
-    for element in root.iter('*'):
-        if element.text is not None and not element.text.strip():
-            element.text = None
-        if element.text is not None:
-            element.text = element.text.strip().replace("\n", "").replace("\r", "")
-        if element.tail is not None and not element.tail.strip():
-            element.tail = None
-        if element.tail is not None:
-            element.tail = element.tail.strip().replace("\n", "").replace("\r", "")
-
-    # Sort the elements
-    for parent in root.xpath('//*[./*]'): # Search for parent elements
-          parent[:] = sorted(parent,key=lambda x: x.tag)
-
-    xmlstr = etree.tostring(root, encoding="utf-8", xml_declaration=True, pretty_print=pretty_print)
-    # there are two different DTD URIs
-    xmlstr = re.sub(r'xmlns="[^"]+"', 'xmlns="s3"', xmlstr)
-    xmlstr = re.sub(r'xmlns=\'[^\']+\'', 'xmlns="s3"', xmlstr)
-    for uri in ['http://doc.s3.amazonaws.com/doc/2006-03-01/', 'http://s3.amazonaws.com/doc/2006-03-01/']:
-        xmlstr = xmlstr.replace(uri, 'URI-DTD')
-    #xmlstr = re.sub(r'>\s+', '>', xmlstr, count=0, flags=re.MULTILINE)
-    return xmlstr
-
-def assert_xml_equal(got, want):
-    assert want is not None, 'Wanted XML cannot be None'
-    if got is None:
-        raise AssertionError('Got input to validate was None')
-    checker = LXMLOutputChecker()
-    if not checker.check_output(want, got, 0):
-        message = checker.output_difference(Example("", want), got, 0)
-        raise AssertionError(message)

s3tests_boto3/functional/__init__.py

@@ -1,782 +0,0 @@
-import pytest
-import boto3
-from botocore import UNSIGNED
-from botocore.client import Config
-from botocore.exceptions import ClientError
-from botocore.handlers import disable_signing
-import configparser
-import datetime
-import time
-import os
-import munch
-import random
-import string
-import itertools
-import urllib3
-import re
-
-config = munch.Munch
-
-# this will be assigned by setup()
-prefix = None
-
-def get_prefix():
-    assert prefix is not None
-    return prefix
-
-def choose_bucket_prefix(template, max_len=30):
-    """
-    Choose a prefix for our test buckets, so they're easy to identify.
-
-    Use template and feed it more and more random filler, until it's
-    as long as possible but still below max_len.
-    """
-    rand = ''.join(
-        random.choice(string.ascii_lowercase + string.digits)
-        for c in range(255)
-        )
-
-    while rand:
-        s = template.format(random=rand)
-        if len(s) <= max_len:
-            return s
-        rand = rand[:-1]
-
-    raise RuntimeError(
-        'Bucket prefix template is impossible to fulfill: {template!r}'.format(
-            template=template,
-            ),
-        )
-
-def get_buckets_list(client=None, prefix=None):
-    if client == None:
-        client = get_client()
-    if prefix == None:
-        prefix = get_prefix()
-    response = client.list_buckets()
-    bucket_dicts = response['Buckets']
-    buckets_list = []
-    for bucket in bucket_dicts:
-        if prefix in bucket['Name']:
-            buckets_list.append(bucket['Name'])
-
-    return buckets_list
-
-def get_objects_list(bucket, client=None, prefix=None):
-    if client == None:
-        client = get_client()
-
-    if prefix == None:
-        response = client.list_objects(Bucket=bucket)
-    else:
-        response = client.list_objects(Bucket=bucket, Prefix=prefix)
-    objects_list = []
-
-    if 'Contents' in response:
-        contents = response['Contents']
-        for obj in contents:
-            objects_list.append(obj['Key'])
-
-    return objects_list
-
-# generator function that returns object listings in batches, where each
-# batch is a list of dicts compatible with delete_objects()
-def list_versions(client, bucket, batch_size):
-    kwargs = {'Bucket': bucket, 'MaxKeys': batch_size}
-    truncated = True
-    while truncated:
-        listing = client.list_object_versions(**kwargs)
-
-        kwargs['KeyMarker'] = listing.get('NextKeyMarker')
-        kwargs['VersionIdMarker'] = listing.get('NextVersionIdMarker')
-        truncated = listing['IsTruncated']
-
-        objs = listing.get('Versions', []) + listing.get('DeleteMarkers', [])
-        if len(objs):
-            yield [{'Key': o['Key'], 'VersionId': o['VersionId']} for o in objs]
-
-def nuke_bucket(client, bucket):
-    batch_size = 128
-    max_retain_date = None
-
-    # list and delete objects in batches
-    for objects in list_versions(client, bucket, batch_size):
-        delete = client.delete_objects(Bucket=bucket,
-                Delete={'Objects': objects, 'Quiet': True},
-                BypassGovernanceRetention=True)
-
-        # check for object locks on 403 AccessDenied errors
-        for err in delete.get('Errors', []):
-            if err.get('Code') != 'AccessDenied':
-                continue
-            try:
-                res = client.get_object_retention(Bucket=bucket,
-                        Key=err['Key'], VersionId=err['VersionId'])
-                retain_date = res['Retention']['RetainUntilDate']
-                if not max_retain_date or max_retain_date < retain_date:
-                    max_retain_date = retain_date
-            except ClientError:
-                pass
-
-    if max_retain_date:
-        # wait out the retention period (up to 60 seconds)
-        now = datetime.datetime.now(max_retain_date.tzinfo)
-        if max_retain_date > now:
-            delta = max_retain_date - now
-            if delta.total_seconds() > 60:
-                raise RuntimeError('bucket {} still has objects \
-locked for {} more seconds, not waiting for \
-bucket cleanup'.format(bucket, delta.total_seconds()))
-            print('nuke_bucket', bucket, 'waiting', delta.total_seconds(),
-                    'seconds for object locks to expire')
-            time.sleep(delta.total_seconds())
-
-        for objects in list_versions(client, bucket, batch_size):
-            client.delete_objects(Bucket=bucket,
-                    Delete={'Objects': objects, 'Quiet': True},
-                    BypassGovernanceRetention=True)
-
-    client.delete_bucket(Bucket=bucket)
-
-def nuke_prefixed_buckets(prefix, client=None):
-    if client == None:
-        client = get_client()
-
-    buckets = get_buckets_list(client, prefix)
-
-    err = None
-    for bucket_name in buckets:
-        try:
-            nuke_bucket(client, bucket_name)
-        except Exception as e:
-            # The exception shouldn't be raised when doing cleanup. Pass and continue
-            # the bucket cleanup process. Otherwise left buckets wouldn't be cleared
-            # resulting in some kind of resource leak. err is used to hint user some
-            # exception once occurred.
-            err = e
-            pass
-    if err:
-        raise err
-
-    print('Done with cleanup of buckets in tests.')
-
-def configured_storage_classes():
-    sc = ['STANDARD']
-
-    extra_sc = re.split(r"[\b\W\b]+", config.storage_classes)
-
-    for item in extra_sc:
-        if item != 'STANDARD':
-             sc.append(item)
-
-    sc = [i for i in sc if i]
-    print("storage classes configured: " + str(sc))
-
-    return sc
-
-def configure():
-    cfg = configparser.RawConfigParser()
-    try:
-        path = os.environ['S3TEST_CONF']
-    except KeyError:
-        raise RuntimeError(
-            'To run tests, point environment '
-            + 'variable S3TEST_CONF to a config file.',
-            )
-    cfg.read(path)
-
-    if not cfg.defaults():
-        raise RuntimeError('Your config file is missing the DEFAULT section!')
-    if not cfg.has_section("s3 main"):
-        raise RuntimeError('Your config file is missing the "s3 main" section!')
-    if not cfg.has_section("s3 alt"):
-        raise RuntimeError('Your config file is missing the "s3 alt" section!')
-    if not cfg.has_section("s3 tenant"):
-        raise RuntimeError('Your config file is missing the "s3 tenant" section!')
-
-    global prefix
-
-    defaults = cfg.defaults()
-
-    # vars from the DEFAULT section
-    config.default_host = defaults.get("host")
-    config.default_port = int(defaults.get("port"))
-    config.default_is_secure = cfg.getboolean('DEFAULT', "is_secure")
-
-    proto = 'https' if config.default_is_secure else 'http'
-    config.default_endpoint = "%s://%s:%d" % (proto, config.default_host, config.default_port)
-
-    try:
-        config.default_ssl_verify = cfg.getboolean('DEFAULT', "ssl_verify")
-    except configparser.NoOptionError:
-        config.default_ssl_verify = False
-
-    # Disable InsecureRequestWarning reported by urllib3 when ssl_verify is False
-    if not config.default_ssl_verify:
-        urllib3.disable_warnings()
-
-    # vars from the main section
-    config.main_access_key = cfg.get('s3 main',"access_key")
-    config.main_secret_key = cfg.get('s3 main',"secret_key")
-    config.main_display_name = cfg.get('s3 main',"display_name")
-    config.main_user_id = cfg.get('s3 main',"user_id")
-    config.main_email = cfg.get('s3 main',"email")
-    try:
-        config.main_kms_keyid = cfg.get('s3 main',"kms_keyid")
-    except (configparser.NoSectionError, configparser.NoOptionError):
-        config.main_kms_keyid = 'testkey-1'
-
-    try:
-        config.main_kms_keyid2 = cfg.get('s3 main',"kms_keyid2")
-    except (configparser.NoSectionError, configparser.NoOptionError):
-        config.main_kms_keyid2 = 'testkey-2'
-
-    try:
-        config.main_api_name = cfg.get('s3 main',"api_name")
-    except (configparser.NoSectionError, configparser.NoOptionError):
-        config.main_api_name = ""
-        pass
-
-    try:
-        config.storage_classes = cfg.get('s3 main',"storage_classes")
-    except (configparser.NoSectionError, configparser.NoOptionError):
-        config.storage_classes = ""
-        pass
-
-    try:
-        config.lc_debug_interval = int(cfg.get('s3 main',"lc_debug_interval"))
-    except (configparser.NoSectionError, configparser.NoOptionError):
-        config.lc_debug_interval = 10
-
-    config.alt_access_key = cfg.get('s3 alt',"access_key")
-    config.alt_secret_key = cfg.get('s3 alt',"secret_key")
-    config.alt_display_name = cfg.get('s3 alt',"display_name")
-    config.alt_user_id = cfg.get('s3 alt',"user_id")
-    config.alt_email = cfg.get('s3 alt',"email")
-
-    config.tenant_access_key = cfg.get('s3 tenant',"access_key")
-    config.tenant_secret_key = cfg.get('s3 tenant',"secret_key")
-    config.tenant_display_name = cfg.get('s3 tenant',"display_name")
-    config.tenant_user_id = cfg.get('s3 tenant',"user_id")
-    config.tenant_email = cfg.get('s3 tenant',"email")
-    config.tenant_name = cfg.get('s3 tenant',"tenant")
-
-    config.iam_access_key = cfg.get('iam',"access_key")
-    config.iam_secret_key = cfg.get('iam',"secret_key")
-    config.iam_display_name = cfg.get('iam',"display_name")
-    config.iam_user_id = cfg.get('iam',"user_id")
-    config.iam_email = cfg.get('iam',"email")
-
-    config.iam_root_access_key = cfg.get('iam root',"access_key")
-    config.iam_root_secret_key = cfg.get('iam root',"secret_key")
-    config.iam_root_user_id = cfg.get('iam root',"user_id")
-    config.iam_root_email = cfg.get('iam root',"email")
-
-    config.iam_alt_root_access_key = cfg.get('iam alt root',"access_key")
-    config.iam_alt_root_secret_key = cfg.get('iam alt root',"secret_key")
-    config.iam_alt_root_user_id = cfg.get('iam alt root',"user_id")
-    config.iam_alt_root_email = cfg.get('iam alt root',"email")
-
-    # vars from the fixtures section
-    template = cfg.get('fixtures', "bucket prefix", fallback='test-{random}-')
-    prefix = choose_bucket_prefix(template=template)
-    template = cfg.get('fixtures', "iam name prefix", fallback="s3-tests-")
-    config.iam_name_prefix = choose_bucket_prefix(template=template)
-    template = cfg.get('fixtures', "iam path prefix", fallback="/s3-tests/")
-    config.iam_path_prefix = choose_bucket_prefix(template=template)
-
-    if cfg.has_section("s3 cloud"):
-        get_cloud_config(cfg)
-    else:
-        config.cloud_storage_class = None
-
-def setup():
-    alt_client = get_alt_client()
-    tenant_client = get_tenant_client()
-    nuke_prefixed_buckets(prefix=prefix)
-    nuke_prefixed_buckets(prefix=prefix, client=alt_client)
-    nuke_prefixed_buckets(prefix=prefix, client=tenant_client)
-
-def teardown():
-    alt_client = get_alt_client()
-    tenant_client = get_tenant_client()
-    nuke_prefixed_buckets(prefix=prefix)
-    nuke_prefixed_buckets(prefix=prefix, client=alt_client)
-    nuke_prefixed_buckets(prefix=prefix, client=tenant_client)
-    try:
-        iam_client = get_iam_client()
-        list_roles_resp = iam_client.list_roles()
-        for role in list_roles_resp['Roles']:
-            list_policies_resp = iam_client.list_role_policies(RoleName=role['RoleName'])
-            for policy in list_policies_resp['PolicyNames']:
-                del_policy_resp = iam_client.delete_role_policy(
-                                         RoleName=role['RoleName'],
-                                         PolicyName=policy
-                                        )
-            del_role_resp = iam_client.delete_role(RoleName=role['RoleName'])
-        list_oidc_resp = iam_client.list_open_id_connect_providers()
-        for oidcprovider in list_oidc_resp['OpenIDConnectProviderList']:
-            del_oidc_resp = iam_client.delete_open_id_connect_provider(
-                        OpenIDConnectProviderArn=oidcprovider['Arn']
-                    )
-    except:
-        pass
-
-@pytest.fixture(scope="package")
-def configfile():
-    configure()
-    return config
-
-@pytest.fixture(autouse=True)
-def setup_teardown(configfile):
-    setup()
-    yield
-    teardown()
-
-def check_webidentity():
-    cfg = configparser.RawConfigParser()
-    try:
-        path = os.environ['S3TEST_CONF']
-    except KeyError:
-        raise RuntimeError(
-            'To run tests, point environment '
-            + 'variable S3TEST_CONF to a config file.',
-            )
-    cfg.read(path)
-    if not cfg.has_section("webidentity"):
-        raise RuntimeError('Your config file is missing the "webidentity" section!')
-
-    config.webidentity_thumbprint = cfg.get('webidentity', "thumbprint")
-    config.webidentity_aud = cfg.get('webidentity', "aud")
-    config.webidentity_token = cfg.get('webidentity', "token")
-    config.webidentity_realm = cfg.get('webidentity', "KC_REALM")
-    config.webidentity_sub = cfg.get('webidentity', "sub")
-    config.webidentity_azp = cfg.get('webidentity', "azp")
-    config.webidentity_user_token = cfg.get('webidentity', "user_token")
-
-def get_cloud_config(cfg):
-    config.cloud_host = cfg.get('s3 cloud',"host")
-    config.cloud_port = int(cfg.get('s3 cloud',"port"))
-    config.cloud_is_secure = cfg.getboolean('s3 cloud', "is_secure")
-
-    proto = 'https' if config.cloud_is_secure else 'http'
-    config.cloud_endpoint = "%s://%s:%d" % (proto, config.cloud_host, config.cloud_port)
-
-    config.cloud_access_key = cfg.get('s3 cloud',"access_key")
-    config.cloud_secret_key = cfg.get('s3 cloud',"secret_key")
-
-    try:
-        config.cloud_storage_class = cfg.get('s3 cloud', "cloud_storage_class")
-    except (configparser.NoSectionError, configparser.NoOptionError):
-        config.cloud_storage_class = None
-    
-    try:
-        config.cloud_retain_head_object = cfg.get('s3 cloud',"retain_head_object")
-    except (configparser.NoSectionError, configparser.NoOptionError):
-        config.cloud_retain_head_object = None
-
-    try:
-        config.cloud_target_path = cfg.get('s3 cloud',"target_path")
-    except (configparser.NoSectionError, configparser.NoOptionError):
-        config.cloud_target_path = None
-
-    try:
-        config.cloud_target_storage_class = cfg.get('s3 cloud',"target_storage_class")
-    except (configparser.NoSectionError, configparser.NoOptionError):
-        config.cloud_target_storage_class = 'STANDARD'
-
-    try:
-        config.cloud_regular_storage_class = cfg.get('s3 cloud', "storage_class")
-    except (configparser.NoSectionError, configparser.NoOptionError):
-        config.cloud_regular_storage_class  = None
-
-
-def get_client(client_config=None):
-    if client_config == None:
-        client_config = Config(signature_version='s3v4')
-
-    client = boto3.client(service_name='s3',
-                        aws_access_key_id=config.main_access_key,
-                        aws_secret_access_key=config.main_secret_key,
-                        endpoint_url=config.default_endpoint,
-                        use_ssl=config.default_is_secure,
-                        verify=config.default_ssl_verify,
-                        config=client_config)
-    return client
-
-def get_v2_client():
-    client = boto3.client(service_name='s3',
-                        aws_access_key_id=config.main_access_key,
-                        aws_secret_access_key=config.main_secret_key,
-                        endpoint_url=config.default_endpoint,
-                        use_ssl=config.default_is_secure,
-                        verify=config.default_ssl_verify,
-                        config=Config(signature_version='s3'))
-    return client
-
-def get_sts_client(**kwargs):
-    kwargs.setdefault('aws_access_key_id', config.alt_access_key)
-    kwargs.setdefault('aws_secret_access_key', config.alt_secret_key)
-    kwargs.setdefault('config', Config(signature_version='s3v4'))
-
-    client = boto3.client(service_name='sts',
-                          endpoint_url=config.default_endpoint,
-                          region_name='',
-                          use_ssl=config.default_is_secure,
-                          verify=config.default_ssl_verify,
-                          **kwargs)
-    return client
-
-def get_iam_client(**kwargs):
-    kwargs.setdefault('aws_access_key_id', config.iam_access_key)
-    kwargs.setdefault('aws_secret_access_key', config.iam_secret_key)
-
-    client = boto3.client(service_name='iam',
-                        endpoint_url=config.default_endpoint,
-                        region_name='',
-                        use_ssl=config.default_is_secure,
-                        verify=config.default_ssl_verify,
-                        **kwargs)
-    return client
-
-def get_iam_s3client(**kwargs):
-    kwargs.setdefault('aws_access_key_id', config.iam_access_key)
-    kwargs.setdefault('aws_secret_access_key', config.iam_secret_key)
-    kwargs.setdefault('config', Config(signature_version='s3v4'))
-
-    client = boto3.client(service_name='s3',
-                          endpoint_url=config.default_endpoint,
-                          use_ssl=config.default_is_secure,
-                          verify=config.default_ssl_verify,
-                          **kwargs)
-    return client
-
-def get_iam_root_client(**kwargs):
-    kwargs.setdefault('service_name', 'iam')
-    kwargs.setdefault('aws_access_key_id', config.iam_root_access_key)
-    kwargs.setdefault('aws_secret_access_key', config.iam_root_secret_key)
-
-    return boto3.client(endpoint_url=config.default_endpoint,
-                        region_name='',
-                        use_ssl=config.default_is_secure,
-                        verify=config.default_ssl_verify,
-                        **kwargs)
-
-def get_iam_alt_root_client(**kwargs):
-    kwargs.setdefault('service_name', 'iam')
-    kwargs.setdefault('aws_access_key_id', config.iam_alt_root_access_key)
-    kwargs.setdefault('aws_secret_access_key', config.iam_alt_root_secret_key)
-
-    return boto3.client(endpoint_url=config.default_endpoint,
-                        region_name='',
-                        use_ssl=config.default_is_secure,
-                        verify=config.default_ssl_verify,
-                        **kwargs)
-
-def get_alt_client(client_config=None):
-    if client_config == None:
-        client_config = Config(signature_version='s3v4')
-
-    client = boto3.client(service_name='s3',
-                        aws_access_key_id=config.alt_access_key,
-                        aws_secret_access_key=config.alt_secret_key,
-                        endpoint_url=config.default_endpoint,
-                        use_ssl=config.default_is_secure,
-                        verify=config.default_ssl_verify,
-                        config=client_config)
-    return client
-
-def get_cloud_client(client_config=None):
-    if client_config == None:
-        client_config = Config(signature_version='s3v4')
-
-    client = boto3.client(service_name='s3',
-                        aws_access_key_id=config.cloud_access_key,
-                        aws_secret_access_key=config.cloud_secret_key,
-                        endpoint_url=config.cloud_endpoint,
-                        use_ssl=config.cloud_is_secure,
-                        config=client_config)
-    return client
-
-def get_tenant_client(client_config=None):
-    if client_config == None:
-        client_config = Config(signature_version='s3v4')
-
-    client = boto3.client(service_name='s3',
-                        aws_access_key_id=config.tenant_access_key,
-                        aws_secret_access_key=config.tenant_secret_key,
-                        endpoint_url=config.default_endpoint,
-                        use_ssl=config.default_is_secure,
-                        verify=config.default_ssl_verify,
-                        config=client_config)
-    return client
-
-def get_v2_tenant_client():
-    client_config = Config(signature_version='s3')
-    client = boto3.client(service_name='s3',
-                          aws_access_key_id=config.tenant_access_key,
-                          aws_secret_access_key=config.tenant_secret_key,
-                          endpoint_url=config.default_endpoint,
-                          use_ssl=config.default_is_secure,
-                          verify=config.default_ssl_verify,
-                          config=client_config)
-    return client
-
-def get_tenant_iam_client():
-
-    client = boto3.client(service_name='iam',
-                          region_name='us-east-1',
-                          aws_access_key_id=config.tenant_access_key,
-                          aws_secret_access_key=config.tenant_secret_key,
-                          endpoint_url=config.default_endpoint,
-                          verify=config.default_ssl_verify,
-                          use_ssl=config.default_is_secure)
-    return client
-
-def get_alt_iam_client():
-
-    client = boto3.client(service_name='iam',
-                          region_name='',
-                          aws_access_key_id=config.alt_access_key,
-                          aws_secret_access_key=config.alt_secret_key,
-                          endpoint_url=config.default_endpoint,
-                          verify=config.default_ssl_verify,
-                          use_ssl=config.default_is_secure)
-    return client
-
-def get_unauthenticated_client():
-    client = boto3.client(service_name='s3',
-                        aws_access_key_id='',
-                        aws_secret_access_key='',
-                        endpoint_url=config.default_endpoint,
-                        use_ssl=config.default_is_secure,
-                        verify=config.default_ssl_verify,
-                        config=Config(signature_version=UNSIGNED))
-    return client
-
-def get_bad_auth_client(aws_access_key_id='badauth'):
-    client = boto3.client(service_name='s3',
-                        aws_access_key_id=aws_access_key_id,
-                        aws_secret_access_key='roflmao',
-                        endpoint_url=config.default_endpoint,
-                        use_ssl=config.default_is_secure,
-                        verify=config.default_ssl_verify,
-                        config=Config(signature_version='s3v4'))
-    return client
-
-def get_svc_client(client_config=None, svc='s3'):
-    if client_config == None:
-        client_config = Config(signature_version='s3v4')
-
-    client = boto3.client(service_name=svc,
-                        aws_access_key_id=config.main_access_key,
-                        aws_secret_access_key=config.main_secret_key,
-                        endpoint_url=config.default_endpoint,
-                        use_ssl=config.default_is_secure,
-                        verify=config.default_ssl_verify,
-                        config=client_config)
-    return client
-
-bucket_counter = itertools.count(1)
-
-def get_new_bucket_name():
-    """
-    Get a bucket name that probably does not exist.
-
-    We make every attempt to use a unique random prefix, so if a
-    bucket by this name happens to exist, it's ok if tests give
-    false negatives.
-    """
-    name = '{prefix}{num}'.format(
-        prefix=prefix,
-        num=next(bucket_counter),
-        )
-    return name
-
-def get_new_bucket_resource(name=None):
-    """
-    Get a bucket that exists and is empty.
-
-    Always recreates a bucket from scratch. This is useful to also
-    reset ACLs and such.
-    """
-    s3 = boto3.resource('s3',
-                        aws_access_key_id=config.main_access_key,
-                        aws_secret_access_key=config.main_secret_key,
-                        endpoint_url=config.default_endpoint,
-                        use_ssl=config.default_is_secure,
-                        verify=config.default_ssl_verify)
-    if name is None:
-        name = get_new_bucket_name()
-    bucket = s3.Bucket(name)
-    bucket_location = bucket.create()
-    return bucket
-
-def get_new_bucket(client=None, name=None):
-    """
-    Get a bucket that exists and is empty.
-
-    Always recreates a bucket from scratch. This is useful to also
-    reset ACLs and such.
-    """
-    if client is None:
-        client = get_client()
-    if name is None:
-        name = get_new_bucket_name()
-
-    client.create_bucket(Bucket=name)
-    return name
-
-def get_parameter_name():
-    parameter_name=""
-    rand = ''.join(
-        random.choice(string.ascii_lowercase + string.digits)
-        for c in range(255)
-        )
-    while rand:
-        parameter_name = '{random}'.format(random=rand)
-        if len(parameter_name) <= 10:
-            return parameter_name
-        rand = rand[:-1]
-    return parameter_name
-
-def get_sts_user_id():
-    return config.alt_user_id
-
-def get_config_is_secure():
-    return config.default_is_secure
-
-def get_config_host():
-    return config.default_host
-
-def get_config_port():
-    return config.default_port
-
-def get_config_endpoint():
-    return config.default_endpoint
-
-def get_config_ssl_verify():
-    return config.default_ssl_verify
-
-def get_main_aws_access_key():
-    return config.main_access_key
-
-def get_main_aws_secret_key():
-    return config.main_secret_key
-
-def get_main_display_name():
-    return config.main_display_name
-
-def get_main_user_id():
-    return config.main_user_id
-
-def get_main_email():
-    return config.main_email
-
-def get_main_api_name():
-    return config.main_api_name
-
-def get_main_kms_keyid():
-    return config.main_kms_keyid
-
-def get_secondary_kms_keyid():
-    return config.main_kms_keyid2
-
-def get_alt_aws_access_key():
-    return config.alt_access_key
-
-def get_alt_aws_secret_key():
-    return config.alt_secret_key
-
-def get_alt_display_name():
-    return config.alt_display_name
-
-def get_alt_user_id():
-    return config.alt_user_id
-
-def get_alt_email():
-    return config.alt_email
-
-def get_tenant_aws_access_key():
-    return config.tenant_access_key
-
-def get_tenant_aws_secret_key():
-    return config.tenant_secret_key
-
-def get_tenant_display_name():
-    return config.tenant_display_name
-
-def get_tenant_name():
-    return config.tenant_name
-
-def get_tenant_user_id():
-    return config.tenant_user_id
-
-def get_tenant_email():
-    return config.tenant_email
-
-def get_thumbprint():
-    return config.webidentity_thumbprint
-
-def get_aud():
-    return config.webidentity_aud
-
-def get_sub():
-    return config.webidentity_sub
-
-def get_azp():
-    return config.webidentity_azp
-
-def get_token():
-    return config.webidentity_token
-
-def get_realm_name():
-    return config.webidentity_realm
-
-def get_iam_name_prefix():
-    return config.iam_name_prefix
-
-def make_iam_name(name):
-    return config.iam_name_prefix + name
-
-def get_iam_path_prefix():
-    return config.iam_path_prefix
-
-def get_iam_access_key():
-    return config.iam_access_key
-
-def get_iam_secret_key():
-    return config.iam_secret_key
-
-def get_iam_root_user_id():
-    return config.iam_root_user_id
-
-def get_iam_root_email():
-    return config.iam_root_email
-
-def get_iam_alt_root_user_id():
-    return config.iam_alt_root_user_id
-
-def get_iam_alt_root_email():
-    return config.iam_alt_root_email
-
-def get_user_token():
-    return config.webidentity_user_token
-
-def get_cloud_storage_class():
-    return config.cloud_storage_class
-
-def get_cloud_retain_head_object():
-    return config.cloud_retain_head_object
-
-def get_cloud_regular_storage_class():
-    return config.cloud_regular_storage_class
-
-def get_cloud_target_path():
-    return config.cloud_target_path
-
-def get_cloud_target_storage_class():
-    return config.cloud_target_storage_class
-
-def get_lc_debug_interval():
-    return config.lc_debug_interval

s3tests_boto3/functional/iam.py

@@ -1,199 +0,0 @@
-from botocore.exceptions import ClientError
-import pytest
-
-from . import (
-    configfile,
-    get_iam_root_client,
-    get_iam_root_user_id,
-    get_iam_root_email,
-    get_iam_alt_root_client,
-    get_iam_alt_root_user_id,
-    get_iam_alt_root_email,
-    get_iam_path_prefix,
-)
-
-def nuke_user_keys(client, name):
-    p = client.get_paginator('list_access_keys')
-    for response in p.paginate(UserName=name):
-        for key in response['AccessKeyMetadata']:
-            try:
-                client.delete_access_key(UserName=name, AccessKeyId=key['AccessKeyId'])
-            except:
-                pass
-
-def nuke_user_policies(client, name):
-    p = client.get_paginator('list_user_policies')
-    for response in p.paginate(UserName=name):
-        for policy in response['PolicyNames']:
-            try:
-                client.delete_user_policy(UserName=name, PolicyName=policy)
-            except:
-                pass
-
-def nuke_attached_user_policies(client, name):
-    p = client.get_paginator('list_attached_user_policies')
-    for response in p.paginate(UserName=name):
-        for policy in response['AttachedPolicies']:
-            try:
-                client.detach_user_policy(UserName=name, PolicyArn=policy['PolicyArn'])
-            except:
-                pass
-
-def nuke_user(client, name):
-    # delete access keys, user policies, etc
-    try:
-        nuke_user_keys(client, name)
-    except:
-        pass
-    try:
-        nuke_user_policies(client, name)
-    except:
-        pass
-    try:
-        nuke_attached_user_policies(client, name)
-    except:
-        pass
-    client.delete_user(UserName=name)
-
-def nuke_users(client, **kwargs):
-    p = client.get_paginator('list_users')
-    for response in p.paginate(**kwargs):
-        for user in response['Users']:
-            try:
-                nuke_user(client, user['UserName'])
-            except:
-                pass
-
-def nuke_group_policies(client, name):
-    p = client.get_paginator('list_group_policies')
-    for response in p.paginate(GroupName=name):
-        for policy in response['PolicyNames']:
-            try:
-                client.delete_group_policy(GroupName=name, PolicyName=policy)
-            except:
-                pass
-
-def nuke_attached_group_policies(client, name):
-    p = client.get_paginator('list_attached_group_policies')
-    for response in p.paginate(GroupName=name):
-        for policy in response['AttachedPolicies']:
-            try:
-                client.detach_group_policy(GroupName=name, PolicyArn=policy['PolicyArn'])
-            except:
-                pass
-
-def nuke_group_users(client, name):
-    p = client.get_paginator('get_group')
-    for response in p.paginate(GroupName=name):
-        for user in response['Users']:
-            try:
-                client.remove_user_from_group(GroupName=name, UserName=user['UserName'])
-            except:
-                pass
-
-def nuke_group(client, name):
-    # delete group policies and remove all users
-    try:
-        nuke_group_policies(client, name)
-    except:
-        pass
-    try:
-        nuke_attached_group_policies(client, name)
-    except:
-        pass
-    try:
-        nuke_group_users(client, name)
-    except:
-        pass
-    client.delete_group(GroupName=name)
-
-def nuke_groups(client, **kwargs):
-    p = client.get_paginator('list_groups')
-    for response in p.paginate(**kwargs):
-        for user in response['Groups']:
-            try:
-                nuke_group(client, user['GroupName'])
-            except:
-                pass
-
-def nuke_role_policies(client, name):
-    p = client.get_paginator('list_role_policies')
-    for response in p.paginate(RoleName=name):
-        for policy in response['PolicyNames']:
-            try:
-                client.delete_role_policy(RoleName=name, PolicyName=policy)
-            except:
-                pass
-
-def nuke_attached_role_policies(client, name):
-    p = client.get_paginator('list_attached_role_policies')
-    for response in p.paginate(RoleName=name):
-        for policy in response['AttachedPolicies']:
-            try:
-                client.detach_role_policy(RoleName=name, PolicyArn=policy['PolicyArn'])
-            except:
-                pass
-
-def nuke_role(client, name):
-    # delete role policies, etc
-    try:
-        nuke_role_policies(client, name)
-    except:
-        pass
-    try:
-        nuke_attached_role_policies(client, name)
-    except:
-        pass
-    client.delete_role(RoleName=name)
-
-def nuke_roles(client, **kwargs):
-    p = client.get_paginator('list_roles')
-    for response in p.paginate(**kwargs):
-        for role in response['Roles']:
-            try:
-                nuke_role(client, role['RoleName'])
-            except:
-                pass
-
-def nuke_oidc_providers(client, prefix):
-    result = client.list_open_id_connect_providers()
-    for provider in result['OpenIDConnectProviderList']:
-        arn = provider['Arn']
-        if f':oidc-provider{prefix}' in arn:
-            try:
-                client.delete_open_id_connect_provider(OpenIDConnectProviderArn=arn)
-            except:
-                pass
-
-
-# fixture for iam account root user
-@pytest.fixture
-def iam_root(configfile):
-    client = get_iam_root_client()
-    try:
-        arn = client.get_user()['User']['Arn']
-        if not arn.endswith(':root'):
-            pytest.skip('[iam root] user does not have :root arn')
-    except ClientError as e:
-        pytest.skip('[iam root] user does not belong to an account')
-
-    yield client
-    nuke_users(client, PathPrefix=get_iam_path_prefix())
-    nuke_groups(client, PathPrefix=get_iam_path_prefix())
-    nuke_roles(client, PathPrefix=get_iam_path_prefix())
-    nuke_oidc_providers(client, get_iam_path_prefix())
-
-# fixture for iam alt account root user
-@pytest.fixture
-def iam_alt_root(configfile):
-    client = get_iam_alt_root_client()
-    try:
-        arn = client.get_user()['User']['Arn']
-        if not arn.endswith(':root'):
-            pytest.skip('[iam alt root] user does not have :root arn')
-    except ClientError as e:
-        pytest.skip('[iam alt root] user does not belong to an account')
-
-    yield client
-    nuke_users(client, PathPrefix=get_iam_path_prefix())
-    nuke_roles(client, PathPrefix=get_iam_path_prefix())

s3tests_boto3/functional/policy.py

@@ -1,46 +0,0 @@
-import json
-
-class Statement(object):
-    def __init__(self, action, resource, principal = {"AWS" : "*"}, effect= "Allow", condition = None):
-        self.principal = principal
-        self.action = action
-        self.resource = resource
-        self.condition = condition
-        self.effect = effect
-
-    def to_dict(self):
-        d = { "Action" : self.action,
-              "Principal" : self.principal,
-              "Effect" : self.effect,
-              "Resource" : self.resource
-        }
-
-        if self.condition is not None:
-            d["Condition"] = self.condition
-
-        return d
-
-class Policy(object):
-    def __init__(self):
-        self.statements = []
-
-    def add_statement(self, s):
-        self.statements.append(s)
-        return self
-
-    def to_json(self):
-        policy_dict = {
-            "Version" : "2012-10-17",
-            "Statement":
-            [s.to_dict() for s in self.statements]
-        }
-
-        return json.dumps(policy_dict)
-
-def make_json_policy(action, resource, principal={"AWS": "*"}, effect="Allow", conditions=None):
-    """
-    Helper function to make single statement policies
-    """
-    s = Statement(action, resource, principal, effect=effect, condition=conditions)
-    p = Policy()
-    return p.add_statement(s).to_json()

s3tests_boto3/functional/rgw_interactive.py

@@ -1,92 +0,0 @@
-#!/usr/bin/python
-import boto3
-import os
-import random
-import string
-import itertools
-
-host = "localhost"
-port = 8000
-
-## AWS access key
-access_key = "0555b35654ad1656d804"
-
-## AWS secret key
-secret_key = "h7GhxuBLTrlhVUyxSPUKUV8r/2EI4ngqJxD7iBdBYLhwluN30JaT3Q=="
-
-prefix = "YOURNAMEHERE-1234-"
-
-endpoint_url = "http://%s:%d" % (host, port)
-
-client = boto3.client(service_name='s3',
-                    aws_access_key_id=access_key,
-                    aws_secret_access_key=secret_key,
-                    endpoint_url=endpoint_url,
-                    use_ssl=False,
-                    verify=False)
-
-s3 = boto3.resource('s3', 
-                    use_ssl=False,
-                    verify=False,
-                    endpoint_url=endpoint_url, 
-                    aws_access_key_id=access_key,
-                    aws_secret_access_key=secret_key)
-
-def choose_bucket_prefix(template, max_len=30):
-    """
-    Choose a prefix for our test buckets, so they're easy to identify.
-
-    Use template and feed it more and more random filler, until it's
-    as long as possible but still below max_len.
-    """
-    rand = ''.join(
-        random.choice(string.ascii_lowercase + string.digits)
-        for c in range(255)
-        )
-
-    while rand:
-        s = template.format(random=rand)
-        if len(s) <= max_len:
-            return s
-        rand = rand[:-1]
-
-    raise RuntimeError(
-        'Bucket prefix template is impossible to fulfill: {template!r}'.format(
-            template=template,
-            ),
-        )
-
-bucket_counter = itertools.count(1)
-
-def get_new_bucket_name():
-    """
-    Get a bucket name that probably does not exist.
-
-    We make every attempt to use a unique random prefix, so if a
-    bucket by this name happens to exist, it's ok if tests give
-    false negatives.
-    """
-    name = '{prefix}{num}'.format(
-        prefix=prefix,
-        num=next(bucket_counter),
-        )
-    return name
-
-def get_new_bucket(session=boto3, name=None, headers=None):
-    """
-    Get a bucket that exists and is empty.
-
-    Always recreates a bucket from scratch. This is useful to also
-    reset ACLs and such.
-    """
-    s3 = session.resource('s3', 
-                        use_ssl=False,
-                        verify=False,
-                        endpoint_url=endpoint_url, 
-                        aws_access_key_id=access_key,
-                        aws_secret_access_key=secret_key)
-    if name is None:
-        name = get_new_bucket_name()
-    bucket = s3.Bucket(name)
-    bucket_location = bucket.create()
-    return bucket

s3tests_boto3/functional/test_headers.py

@@ -1,572 +0,0 @@
-import boto3
-import pytest
-from botocore.exceptions import ClientError
-from email.utils import formatdate
-
-from .utils import assert_raises
-from .utils import _get_status_and_error_code
-from .utils import _get_status
-
-from . import (
-    configfile,
-    setup_teardown,
-    get_client,
-    get_v2_client,
-    get_new_bucket,
-    get_new_bucket_name,
-    )
-
-def _add_header_create_object(headers, client=None):
-    """ Create a new bucket, add an object w/header customizations
-    """
-    bucket_name = get_new_bucket()
-    if client == None:
-        client = get_client()
-    key_name = 'foo'
-
-    # pass in custom headers before PutObject call
-    add_headers = (lambda **kwargs: kwargs['params']['headers'].update(headers))
-    client.meta.events.register('before-call.s3.PutObject', add_headers)
-    client.put_object(Bucket=bucket_name, Key=key_name)
-
-    return bucket_name, key_name
-
-
-def _add_header_create_bad_object(headers, client=None):
-    """ Create a new bucket, add an object with a header. This should cause a failure 
-    """
-    bucket_name = get_new_bucket()
-    if client == None:
-        client = get_client()
-    key_name = 'foo'
-
-    # pass in custom headers before PutObject call
-    add_headers = (lambda **kwargs: kwargs['params']['headers'].update(headers))
-    client.meta.events.register('before-call.s3.PutObject', add_headers)
-    e = assert_raises(ClientError, client.put_object, Bucket=bucket_name, Key=key_name, Body='bar')
-
-    return e
-
-
-def _remove_header_create_object(remove, client=None):
-    """ Create a new bucket, add an object without a header
-    """
-    bucket_name = get_new_bucket()
-    if client == None:
-        client = get_client()
-    key_name = 'foo'
-
-    # remove custom headers before PutObject call
-    def remove_header(**kwargs):
-        if (remove in kwargs['params']['headers']):
-            del kwargs['params']['headers'][remove]
-
-    client.meta.events.register('before-call.s3.PutObject', remove_header)
-    client.put_object(Bucket=bucket_name, Key=key_name)
-
-    return bucket_name, key_name
-
-def _remove_header_create_bad_object(remove, client=None):
-    """ Create a new bucket, add an object without a header. This should cause a failure
-    """
-    bucket_name = get_new_bucket()
-    if client == None:
-        client = get_client()
-    key_name = 'foo'
-
-    # remove custom headers before PutObject call
-    def remove_header(**kwargs):
-        if (remove in kwargs['params']['headers']):
-            del kwargs['params']['headers'][remove]
-
-    client.meta.events.register('before-call.s3.PutObject', remove_header)
-    e = assert_raises(ClientError, client.put_object, Bucket=bucket_name, Key=key_name, Body='bar')
-
-    return e
-
-
-def _add_header_create_bucket(headers, client=None):
-    """ Create a new bucket, w/header customizations
-    """
-    bucket_name = get_new_bucket_name()
-    if client == None:
-        client = get_client()
-
-    # pass in custom headers before PutObject call
-    add_headers = (lambda **kwargs: kwargs['params']['headers'].update(headers))
-    client.meta.events.register('before-call.s3.CreateBucket', add_headers)
-    client.create_bucket(Bucket=bucket_name)
-
-    return bucket_name
-
-
-def _add_header_create_bad_bucket(headers=None, client=None):
-    """ Create a new bucket, w/header customizations that should cause a failure 
-    """
-    bucket_name = get_new_bucket_name()
-    if client == None:
-        client = get_client()
-
-    # pass in custom headers before PutObject call
-    add_headers = (lambda **kwargs: kwargs['params']['headers'].update(headers))
-    client.meta.events.register('before-call.s3.CreateBucket', add_headers)
-    e = assert_raises(ClientError, client.create_bucket, Bucket=bucket_name)
-
-    return e
-
-
-def _remove_header_create_bucket(remove, client=None):
-    """ Create a new bucket, without a header
-    """
-    bucket_name = get_new_bucket_name()
-    if client == None:
-        client = get_client()
-
-    # remove custom headers before PutObject call
-    def remove_header(**kwargs):
-        if (remove in kwargs['params']['headers']):
-            del kwargs['params']['headers'][remove]
-
-    client.meta.events.register('before-call.s3.CreateBucket', remove_header)
-    client.create_bucket(Bucket=bucket_name)
-
-    return bucket_name
-
-def _remove_header_create_bad_bucket(remove, client=None):
-    """ Create a new bucket, without a header. This should cause a failure
-    """
-    bucket_name = get_new_bucket_name()
-    if client == None:
-        client = get_client()
-
-    # remove custom headers before PutObject call
-    def remove_header(**kwargs):
-        if (remove in kwargs['params']['headers']):
-            del kwargs['params']['headers'][remove]
-
-    client.meta.events.register('before-call.s3.CreateBucket', remove_header)
-    e = assert_raises(ClientError, client.create_bucket, Bucket=bucket_name)
-
-    return e
-
-#
-# common tests
-#
-
-@pytest.mark.auth_common
-def test_object_create_bad_md5_invalid_short():
-    e = _add_header_create_bad_object({'Content-MD5':'YWJyYWNhZGFicmE='})
-    status, error_code = _get_status_and_error_code(e.response)
-    assert status == 400
-    assert error_code == 'InvalidDigest'
-
-@pytest.mark.auth_common
-def test_object_create_bad_md5_bad():
-    e = _add_header_create_bad_object({'Content-MD5':'rL0Y20xC+Fzt72VPzMSk2A=='})
-    status, error_code = _get_status_and_error_code(e.response)
-    assert status == 400
-    assert error_code == 'BadDigest'
-
-@pytest.mark.auth_common
-def test_object_create_bad_md5_empty():
-    e = _add_header_create_bad_object({'Content-MD5':''})
-    status, error_code = _get_status_and_error_code(e.response)
-    assert status == 400
-    assert error_code == 'InvalidDigest'
-
-@pytest.mark.auth_common
-def test_object_create_bad_md5_none():
-    bucket_name, key_name = _remove_header_create_object('Content-MD5')
-    client = get_client()
-    client.put_object(Bucket=bucket_name, Key=key_name, Body='bar')
-
-@pytest.mark.auth_common
-def test_object_create_bad_expect_mismatch():
-    bucket_name, key_name = _add_header_create_object({'Expect': 200})
-    client = get_client()
-    client.put_object(Bucket=bucket_name, Key=key_name, Body='bar')
-
-@pytest.mark.auth_common
-def test_object_create_bad_expect_empty():
-    bucket_name, key_name = _add_header_create_object({'Expect': ''})
-    client = get_client()
-    client.put_object(Bucket=bucket_name, Key=key_name, Body='bar')
-
-@pytest.mark.auth_common
-def test_object_create_bad_expect_none():
-    bucket_name, key_name = _remove_header_create_object('Expect')
-    client = get_client()
-    client.put_object(Bucket=bucket_name, Key=key_name, Body='bar')
-
-@pytest.mark.auth_common
-# TODO: remove 'fails_on_rgw' and once we have learned how to remove the content-length header
-@pytest.mark.fails_on_rgw
-def test_object_create_bad_contentlength_empty():
-    e = _add_header_create_bad_object({'Content-Length':''})
-    status, error_code = _get_status_and_error_code(e.response)
-    assert status == 400
-
-@pytest.mark.auth_common
-@pytest.mark.fails_on_mod_proxy_fcgi
-def test_object_create_bad_contentlength_negative():
-    client = get_client()
-    bucket_name = get_new_bucket()
-    key_name = 'foo'
-    e = assert_raises(ClientError, client.put_object, Bucket=bucket_name, Key=key_name, ContentLength=-1)
-    status = _get_status(e.response)
-    assert status == 400
-
-@pytest.mark.auth_common
-# TODO: remove 'fails_on_rgw' and once we have learned how to remove the content-length header
-@pytest.mark.fails_on_rgw
-def test_object_create_bad_contentlength_none():
-    remove = 'Content-Length'
-    e = _remove_header_create_bad_object('Content-Length')
-    status, error_code = _get_status_and_error_code(e.response)
-    assert status == 411
-    assert error_code == 'MissingContentLength'
-
-@pytest.mark.auth_common
-def test_object_create_bad_contenttype_invalid():
-    bucket_name, key_name = _add_header_create_object({'Content-Type': 'text/plain'})
-    client = get_client()
-    client.put_object(Bucket=bucket_name, Key=key_name, Body='bar')
-
-@pytest.mark.auth_common
-def test_object_create_bad_contenttype_empty():
-    client = get_client()
-    key_name = 'foo'
-    bucket_name = get_new_bucket()
-    client.put_object(Bucket=bucket_name, Key=key_name, Body='bar', ContentType='')
-
-@pytest.mark.auth_common
-def test_object_create_bad_contenttype_none():
-    bucket_name = get_new_bucket()
-    key_name = 'foo'
-    client = get_client()
-    # as long as ContentType isn't specified in put_object it isn't going into the request
-    client.put_object(Bucket=bucket_name, Key=key_name, Body='bar')
-
-
-@pytest.mark.auth_common
-# TODO: remove 'fails_on_rgw' and once we have learned how to remove the authorization header
-@pytest.mark.fails_on_rgw
-def test_object_create_bad_authorization_empty():
-    e = _add_header_create_bad_object({'Authorization': ''})
-    status, error_code = _get_status_and_error_code(e.response)
-    assert status == 403
-
-@pytest.mark.auth_common
-# TODO: remove 'fails_on_rgw' and once we have learned how to pass both the 'Date' and 'X-Amz-Date' header during signing and not 'X-Amz-Date' before
-@pytest.mark.fails_on_rgw
-def test_object_create_date_and_amz_date():
-    date = formatdate(usegmt=True)
-    bucket_name, key_name = _add_header_create_object({'Date': date, 'X-Amz-Date': date})
-    client = get_client()
-    client.put_object(Bucket=bucket_name, Key=key_name, Body='bar')
-
-@pytest.mark.auth_common
-# TODO: remove 'fails_on_rgw' and once we have learned how to pass both the 'Date' and 'X-Amz-Date' header during signing and not 'X-Amz-Date' before
-@pytest.mark.fails_on_rgw
-def test_object_create_amz_date_and_no_date():
-    date = formatdate(usegmt=True)
-    bucket_name, key_name = _add_header_create_object({'Date': '', 'X-Amz-Date': date})
-    client = get_client()
-    client.put_object(Bucket=bucket_name, Key=key_name, Body='bar')
-
-# the teardown is really messed up here. check it out
-@pytest.mark.auth_common
-# TODO: remove 'fails_on_rgw' and once we have learned how to remove the authorization header
-@pytest.mark.fails_on_rgw
-def test_object_create_bad_authorization_none():
-    e = _remove_header_create_bad_object('Authorization')
-    status, error_code = _get_status_and_error_code(e.response)
-    assert status == 403
-
-@pytest.mark.auth_common
-# TODO: remove 'fails_on_rgw' and once we have learned how to remove the content-length header
-@pytest.mark.fails_on_rgw
-def test_bucket_create_contentlength_none():
-    remove = 'Content-Length'
-    _remove_header_create_bucket(remove)
-
-@pytest.mark.auth_common
-# TODO: remove 'fails_on_rgw' and once we have learned how to remove the content-length header
-@pytest.mark.fails_on_rgw
-def test_object_acl_create_contentlength_none():
-    bucket_name = get_new_bucket()
-    client = get_client()
-    client.put_object(Bucket=bucket_name, Key='foo', Body='bar')
-
-    remove = 'Content-Length'
-    def remove_header(**kwargs):
-        if (remove in kwargs['params']['headers']):
-            del kwargs['params']['headers'][remove]
-
-    client.meta.events.register('before-call.s3.PutObjectAcl', remove_header)
-    client.put_object_acl(Bucket=bucket_name, Key='foo', ACL='public-read')
-
-@pytest.mark.auth_common
-def test_bucket_put_bad_canned_acl():
-    bucket_name = get_new_bucket()
-    client = get_client()
-
-    headers = {'x-amz-acl': 'public-ready'}
-    add_headers = (lambda **kwargs: kwargs['params']['headers'].update(headers))
-    client.meta.events.register('before-call.s3.PutBucketAcl', add_headers)
-
-    e = assert_raises(ClientError, client.put_bucket_acl, Bucket=bucket_name, ACL='public-read')
-    status = _get_status(e.response)
-    assert status == 400
-
-@pytest.mark.auth_common
-def test_bucket_create_bad_expect_mismatch():
-    bucket_name = get_new_bucket_name()
-    client = get_client()
-
-    headers = {'Expect': 200}
-    add_headers = (lambda **kwargs: kwargs['params']['headers'].update(headers))
-    client.meta.events.register('before-call.s3.CreateBucket', add_headers)
-    client.create_bucket(Bucket=bucket_name)
-
-@pytest.mark.auth_common
-def test_bucket_create_bad_expect_empty():
-    headers = {'Expect': ''}
-    _add_header_create_bucket(headers)
-
-@pytest.mark.auth_common
-# TODO: The request isn't even making it to the RGW past the frontend
-# This test had 'fails_on_rgw' before the move to boto3
-@pytest.mark.fails_on_rgw
-def test_bucket_create_bad_contentlength_empty():
-    headers = {'Content-Length': ''}
-    e = _add_header_create_bad_bucket(headers)
-    status, error_code = _get_status_and_error_code(e.response)
-    assert status == 400
-
-@pytest.mark.auth_common
-@pytest.mark.fails_on_mod_proxy_fcgi
-def test_bucket_create_bad_contentlength_negative():
-    headers = {'Content-Length': '-1'}
-    e = _add_header_create_bad_bucket(headers)
-    status = _get_status(e.response)
-    assert status == 400
-
-@pytest.mark.auth_common
-# TODO: remove 'fails_on_rgw' and once we have learned how to remove the content-length header
-@pytest.mark.fails_on_rgw
-def test_bucket_create_bad_contentlength_none():
-    remove = 'Content-Length'
-    _remove_header_create_bucket(remove)
-
-@pytest.mark.auth_common
-# TODO: remove 'fails_on_rgw' and once we have learned how to manipulate the authorization header
-@pytest.mark.fails_on_rgw
-def test_bucket_create_bad_authorization_empty():
-    headers = {'Authorization': ''}
-    e = _add_header_create_bad_bucket(headers)
-    status, error_code = _get_status_and_error_code(e.response)
-    assert status == 403
-    assert error_code == 'AccessDenied'
-
-@pytest.mark.auth_common
-# TODO: remove 'fails_on_rgw' and once we have learned how to manipulate the authorization header
-@pytest.mark.fails_on_rgw
-def test_bucket_create_bad_authorization_none():
-    e = _remove_header_create_bad_bucket('Authorization')
-    status, error_code = _get_status_and_error_code(e.response)
-    assert status == 403
-    assert error_code == 'AccessDenied'
-
-@pytest.mark.auth_aws2
-def test_object_create_bad_md5_invalid_garbage_aws2():
-    v2_client = get_v2_client()
-    headers = {'Content-MD5': 'AWS HAHAHA'}
-    e = _add_header_create_bad_object(headers, v2_client)
-    status, error_code = _get_status_and_error_code(e.response)
-    assert status == 400
-    assert error_code == 'InvalidDigest'
-
-@pytest.mark.auth_aws2
-# TODO: remove 'fails_on_rgw' and once we have learned how to manipulate the Content-Length header
-@pytest.mark.fails_on_rgw
-def test_object_create_bad_contentlength_mismatch_below_aws2():
-    v2_client = get_v2_client()
-    content = 'bar'
-    length = len(content) - 1
-    headers = {'Content-Length': str(length)}
-    e = _add_header_create_bad_object(headers, v2_client)
-    status, error_code = _get_status_and_error_code(e.response)
-    assert status == 400
-    assert error_code == 'BadDigest'
-
-@pytest.mark.auth_aws2
-# TODO: remove 'fails_on_rgw' and once we have learned how to manipulate the authorization header
-@pytest.mark.fails_on_rgw
-def test_object_create_bad_authorization_incorrect_aws2():
-    v2_client = get_v2_client()
-    headers = {'Authorization': 'AWS AKIAIGR7ZNNBHC5BKSUB:FWeDfwojDSdS2Ztmpfeubhd9isU='}
-    e = _add_header_create_bad_object(headers, v2_client)
-    status, error_code = _get_status_and_error_code(e.response)
-    assert status == 403
-    assert error_code == 'InvalidDigest'
-
-@pytest.mark.auth_aws2
-# TODO: remove 'fails_on_rgw' and once we have learned how to manipulate the authorization header
-@pytest.mark.fails_on_rgw
-def test_object_create_bad_authorization_invalid_aws2():
-    v2_client = get_v2_client()
-    headers = {'Authorization': 'AWS HAHAHA'}
-    e = _add_header_create_bad_object(headers, v2_client)
-    status, error_code = _get_status_and_error_code(e.response)
-    assert status == 400
-    assert error_code == 'InvalidArgument'
-
-@pytest.mark.auth_aws2
-def test_object_create_bad_ua_empty_aws2():
-    v2_client = get_v2_client()
-    headers = {'User-Agent': ''}
-    bucket_name, key_name = _add_header_create_object(headers, v2_client)
-    v2_client.put_object(Bucket=bucket_name, Key=key_name, Body='bar')
-
-@pytest.mark.auth_aws2
-def test_object_create_bad_ua_none_aws2():
-    v2_client = get_v2_client()
-    remove = 'User-Agent'
-    bucket_name, key_name = _remove_header_create_object(remove, v2_client)
-    v2_client.put_object(Bucket=bucket_name, Key=key_name, Body='bar')
-
-@pytest.mark.auth_aws2
-def test_object_create_bad_date_invalid_aws2():
-    v2_client = get_v2_client()
-    headers = {'x-amz-date': 'Bad Date'}
-    e = _add_header_create_bad_object(headers, v2_client)
-    status, error_code = _get_status_and_error_code(e.response)
-    assert status == 403
-    assert error_code == 'AccessDenied'
-
-@pytest.mark.auth_aws2
-def test_object_create_bad_date_empty_aws2():
-    v2_client = get_v2_client()
-    headers = {'x-amz-date': ''}
-    e = _add_header_create_bad_object(headers, v2_client)
-    status, error_code = _get_status_and_error_code(e.response)
-    assert status == 403
-    assert error_code == 'AccessDenied'
-
-@pytest.mark.auth_aws2
-# TODO: remove 'fails_on_rgw' and once we have learned how to remove the date header
-@pytest.mark.fails_on_rgw
-def test_object_create_bad_date_none_aws2():
-    v2_client = get_v2_client()
-    remove = 'x-amz-date'
-    e = _remove_header_create_bad_object(remove, v2_client)
-    status, error_code = _get_status_and_error_code(e.response)
-    assert status == 403
-    assert error_code == 'AccessDenied'
-
-@pytest.mark.auth_aws2
-def test_object_create_bad_date_before_today_aws2():
-    v2_client = get_v2_client()
-    headers = {'x-amz-date': 'Tue, 07 Jul 2010 21:53:04 GMT'}
-    e = _add_header_create_bad_object(headers, v2_client)
-    status, error_code = _get_status_and_error_code(e.response)
-    assert status == 403
-    assert error_code == 'RequestTimeTooSkewed'
-
-@pytest.mark.auth_aws2
-def test_object_create_bad_date_before_epoch_aws2():
-    v2_client = get_v2_client()
-    headers = {'x-amz-date': 'Tue, 07 Jul 1950 21:53:04 GMT'}
-    e = _add_header_create_bad_object(headers, v2_client)
-    status, error_code = _get_status_and_error_code(e.response)
-    assert status == 403
-    assert error_code == 'AccessDenied'
-
-@pytest.mark.auth_aws2
-def test_object_create_bad_date_after_end_aws2():
-    v2_client = get_v2_client()
-    headers = {'x-amz-date': 'Tue, 07 Jul 9999 21:53:04 GMT'}
-    e = _add_header_create_bad_object(headers, v2_client)
-    status, error_code = _get_status_and_error_code(e.response)
-    assert status == 403
-    assert error_code == 'RequestTimeTooSkewed'
-
-@pytest.mark.auth_aws2
-# TODO: remove 'fails_on_rgw' and once we have learned how to remove the date header
-@pytest.mark.fails_on_rgw
-def test_bucket_create_bad_authorization_invalid_aws2():
-    v2_client = get_v2_client()
-    headers = {'Authorization': 'AWS HAHAHA'}
-    e = _add_header_create_bad_bucket(headers, v2_client)
-    status, error_code = _get_status_and_error_code(e.response)
-    assert status == 400
-    assert error_code == 'InvalidArgument'
-
-@pytest.mark.auth_aws2
-def test_bucket_create_bad_ua_empty_aws2():
-    v2_client = get_v2_client()
-    headers = {'User-Agent': ''}
-    _add_header_create_bucket(headers, v2_client)
-
-@pytest.mark.auth_aws2
-def test_bucket_create_bad_ua_none_aws2():
-    v2_client = get_v2_client()
-    remove = 'User-Agent'
-    _remove_header_create_bucket(remove, v2_client)
-
-@pytest.mark.auth_aws2
-def test_bucket_create_bad_date_invalid_aws2():
-    v2_client = get_v2_client()
-    headers = {'x-amz-date': 'Bad Date'}
-    e = _add_header_create_bad_bucket(headers, v2_client)
-    status, error_code = _get_status_and_error_code(e.response)
-    assert status == 403
-    assert error_code == 'AccessDenied'
-
-@pytest.mark.auth_aws2
-def test_bucket_create_bad_date_empty_aws2():
-    v2_client = get_v2_client()
-    headers = {'x-amz-date': ''}
-    e = _add_header_create_bad_bucket(headers, v2_client)
-    status, error_code = _get_status_and_error_code(e.response)
-    assert status == 403
-    assert error_code == 'AccessDenied'
-
-@pytest.mark.auth_aws2
-# TODO: remove 'fails_on_rgw' and once we have learned how to remove the date header
-@pytest.mark.fails_on_rgw
-def test_bucket_create_bad_date_none_aws2():
-    v2_client = get_v2_client()
-    remove = 'x-amz-date'
-    e = _remove_header_create_bad_bucket(remove, v2_client)
-    status, error_code = _get_status_and_error_code(e.response)
-    assert status == 403
-    assert error_code == 'AccessDenied'
-
-@pytest.mark.auth_aws2
-def test_bucket_create_bad_date_before_today_aws2():
-    v2_client = get_v2_client()
-    headers = {'x-amz-date': 'Tue, 07 Jul 2010 21:53:04 GMT'}
-    e = _add_header_create_bad_bucket(headers, v2_client)
-    status, error_code = _get_status_and_error_code(e.response)
-    assert status == 403
-    assert error_code == 'RequestTimeTooSkewed'
-
-@pytest.mark.auth_aws2
-def test_bucket_create_bad_date_after_today_aws2():
-    v2_client = get_v2_client()
-    headers = {'x-amz-date': 'Tue, 07 Jul 2030 21:53:04 GMT'}
-    e = _add_header_create_bad_bucket(headers, v2_client)
-    status, error_code = _get_status_and_error_code(e.response)
-    assert status == 403
-    assert error_code == 'RequestTimeTooSkewed'
-
-@pytest.mark.auth_aws2
-def test_bucket_create_bad_date_before_epoch_aws2():
-    v2_client = get_v2_client()
-    headers = {'x-amz-date': 'Tue, 07 Jul 1950 21:53:04 GMT'}
-    e = _add_header_create_bad_bucket(headers, v2_client)
-    status, error_code = _get_status_and_error_code(e.response)
-    assert status == 403
-    assert error_code == 'AccessDenied'

s3tests_boto3/functional/test_sns.py

@@ -1,159 +0,0 @@
-import json
-import pytest
-from botocore.exceptions import ClientError
-from . import (
-    configfile,
-    get_iam_root_client,
-    get_iam_alt_root_client,
-    get_new_bucket_name,
-    get_prefix,
-    nuke_prefixed_buckets,
-)
-from .iam import iam_root, iam_alt_root
-from .utils import assert_raises, _get_status_and_error_code
-
-def get_new_topic_name():
-    return get_new_bucket_name()
-
-def nuke_topics(client, prefix):
-    p = client.get_paginator('list_topics')
-    for response in p.paginate():
-        for topic in response['Topics']:
-            arn = topic['TopicArn']
-            if prefix not in arn:
-                pass
-            try:
-                client.delete_topic(TopicArn=arn)
-            except:
-                pass
-
-@pytest.fixture
-def sns(iam_root):
-    client = get_iam_root_client(service_name='sns')
-    yield client
-    nuke_topics(client, get_prefix())
-
-@pytest.fixture
-def sns_alt(iam_alt_root):
-    client = get_iam_alt_root_client(service_name='sns')
-    yield client
-    nuke_topics(client, get_prefix())
-
-@pytest.fixture
-def s3(iam_root):
-    client = get_iam_root_client(service_name='s3')
-    yield client
-    nuke_prefixed_buckets(get_prefix(), client)
-
-@pytest.fixture
-def s3_alt(iam_alt_root):
-    client = get_iam_alt_root_client(service_name='s3')
-    yield client
-    nuke_prefixed_buckets(get_prefix(), client)
-
-
-@pytest.mark.iam_account
-@pytest.mark.sns
-def test_account_topic(sns):
-    name = get_new_topic_name()
-
-    response = sns.create_topic(Name=name)
-    arn = response['TopicArn']
-    assert arn.startswith('arn:aws:sns:')
-    assert arn.endswith(f':{name}')
-
-    response = sns.list_topics()
-    assert arn in [p['TopicArn'] for p in response['Topics']]
-
-    sns.set_topic_attributes(TopicArn=arn, AttributeName='Policy', AttributeValue='')
-
-    response = sns.get_topic_attributes(TopicArn=arn)
-    assert 'Attributes' in response
-
-    sns.delete_topic(TopicArn=arn)
-
-    response = sns.list_topics()
-    assert arn not in [p['TopicArn'] for p in response['Topics']]
-
-    with pytest.raises(sns.exceptions.NotFoundException):
-        sns.get_topic_attributes(TopicArn=arn)
-    sns.delete_topic(TopicArn=arn)
-
-@pytest.mark.iam_account
-@pytest.mark.sns
-def test_cross_account_topic(sns, sns_alt):
-    name = get_new_topic_name()
-    arn = sns.create_topic(Name=name)['TopicArn']
-
-    # not visible to any alt user apis
-    with pytest.raises(sns.exceptions.NotFoundException):
-        sns_alt.get_topic_attributes(TopicArn=arn)
-    with pytest.raises(sns.exceptions.NotFoundException):
-        sns_alt.set_topic_attributes(TopicArn=arn, AttributeName='Policy', AttributeValue='')
-
-    # delete returns success
-    sns_alt.delete_topic(TopicArn=arn)
-
-    response = sns_alt.list_topics()
-    assert arn not in [p['TopicArn'] for p in response['Topics']]
-
-@pytest.mark.iam_account
-@pytest.mark.sns
-def test_account_topic_publish(sns, s3):
-    name = get_new_topic_name()
-
-    response = sns.create_topic(Name=name)
-    topic_arn = response['TopicArn']
-
-    bucket = get_new_bucket_name()
-    s3.create_bucket(Bucket=bucket)
-
-    config = {'TopicConfigurations': [{
-        'Id': 'id',
-        'TopicArn': topic_arn,
-        'Events': [ 's3:ObjectCreated:*' ],
-        }]}
-    s3.put_bucket_notification_configuration(
-            Bucket=bucket, NotificationConfiguration=config)
-
-@pytest.mark.iam_account
-@pytest.mark.iam_cross_account
-@pytest.mark.sns
-def test_cross_account_topic_publish(sns, s3_alt, iam_alt_root):
-    name = get_new_topic_name()
-
-    response = sns.create_topic(Name=name)
-    topic_arn = response['TopicArn']
-
-    bucket = get_new_bucket_name()
-    s3_alt.create_bucket(Bucket=bucket)
-
-    config = {'TopicConfigurations': [{
-        'Id': 'id',
-        'TopicArn': topic_arn,
-        'Events': [ 's3:ObjectCreated:*' ],
-        }]}
-
-    # expect AccessDenies because no resource policy allows cross-account access
-    e = assert_raises(ClientError, s3_alt.put_bucket_notification_configuration,
-                      Bucket=bucket, NotificationConfiguration=config)
-    status, error_code = _get_status_and_error_code(e.response)
-    assert status == 403
-    assert error_code == 'AccessDenied'
-
-    # add topic policy to allow the alt user
-    alt_principal = iam_alt_root.get_user()['User']['Arn']
-    policy = json.dumps({
-        'Version': '2012-10-17',
-        'Statement': [{
-            'Effect': 'Allow',
-            'Principal': {'AWS': alt_principal},
-            'Action': 'sns:Publish',
-            'Resource': topic_arn
-            }]
-        })
-    sns.set_topic_attributes(TopicArn=topic_arn, AttributeName='Policy',
-                             AttributeValue=policy)
-
-    s3_alt.put_bucket_notification_configuration(
-            Bucket=bucket, NotificationConfiguration=config)

s3tests_boto3/functional/test_utils.py

@@ -1,9 +0,0 @@
-from . import utils
-
-def test_generate():
-    FIVE_MB = 5 * 1024 * 1024
-    assert len(''.join(utils.generate_random(0))) == 0
-    assert len(''.join(utils.generate_random(1))) == 1
-    assert len(''.join(utils.generate_random(FIVE_MB - 1))) == FIVE_MB - 1
-    assert len(''.join(utils.generate_random(FIVE_MB))) == FIVE_MB
-    assert len(''.join(utils.generate_random(FIVE_MB + 1))) == FIVE_MB + 1

s3tests_boto3/functional/utils.py

@@ -1,47 +0,0 @@
-import random
-import requests
-import string
-import time
-
-def assert_raises(excClass, callableObj, *args, **kwargs):
-    """
-    Like unittest.TestCase.assertRaises, but returns the exception.
-    """
-    try:
-        callableObj(*args, **kwargs)
-    except excClass as e:
-        return e
-    else:
-        if hasattr(excClass, '__name__'):
-            excName = excClass.__name__
-        else:
-            excName = str(excClass)
-        raise AssertionError("%s not raised" % excName)
-
-def generate_random(size, part_size=5*1024*1024):
-    """
-    Generate the specified number random data.
-    (actually each MB is a repetition of the first KB)
-    """
-    chunk = 1024
-    allowed = string.ascii_letters
-    for x in range(0, size, part_size):
-        strpart = ''.join([allowed[random.randint(0, len(allowed) - 1)] for _ in range(chunk)])
-        s = ''
-        left = size - x
-        this_part_size = min(left, part_size)
-        for y in range(this_part_size // chunk):
-            s = s + strpart
-        s = s + strpart[:(this_part_size % chunk)]
-        yield s
-        if (x == size):
-            return
-
-def _get_status(response):
-    status = response['ResponseMetadata']['HTTPStatusCode']
-    return status
-
-def _get_status_and_error_code(response):
-    status = response['ResponseMetadata']['HTTPStatusCode']
-    error_code = response['Error']['Code']
-    return status, error_code

setup.py

@@ -14,10 +14,20 @@ setup(
 
     install_requires=[
         'boto >=2.0b4',
-        'boto3 >=1.0.0',
         'PyYAML',
-        'munch >=2.0.0',
-        'gevent >=1.0',
+        'bunch >=1.0.0',
+        'gevent ==0.13.6',
         'isodate >=0.4.4',
         ],
+
+    entry_points={
+        'console_scripts': [
+            's3tests-generate-objects = s3tests.generate_objects:main',
+            's3tests-test-readwrite = s3tests.readwrite:main',
+            's3tests-test-roundtrip = s3tests.roundtrip:main',
+            's3tests-fuzz-headers = s3tests.fuzz.headers:main',
+            's3tests-analysis-rwstats = s3tests.analysis.rwstats:main',
+            ],
+        },
+
     )

siege.conf

@@ -0,0 +1,382 @@
+# Updated by Siege 2.69, May-24-2010
+# Copyright 2000-2007 by Jeffrey Fulmer, et al.
+# 
+# Siege configuration file -- edit as necessary
+# For more information about configuring and running
+# this program, visit: http://www.joedog.org/
+
+#
+# Variable declarations. You can set variables here 
+# for use in the directives below. Example:
+# PROXY = proxy.joedog.org
+# Reference variables inside ${} or $(), example: 
+# proxy-host = ${PROXY} 
+# You can also reference ENVIRONMENT variables without
+# actually declaring them, example:
+# logfile = $(HOME)/var/siege.log
+
+#
+# Signify verbose mode, true turns on verbose output
+# ex: verbose = true|false
+#
+verbose = true
+
+#
+# CSV Verbose format: with this option, you can choose 
+# to format verbose output in traditional siege format 
+# or comma separated format. The latter will allow you 
+# to redirect output to a file for import into a spread
+# sheet, i.e., siege > file.csv 
+# ex: csv = true|false (default false)
+#
+csv = true
+
+#
+# Full URL verbose format: By default siege displays
+# the URL path and not the full URL. With this option, 
+# you # can instruct siege to show the complete URL.
+# ex: fullurl = true|false (default false)
+# 
+# fullurl = true
+
+#
+# Display id: in verbose mode, display the siege user
+# id associated with the HTTP transaction information
+# ex: display-id = true|false
+#
+# display-id = 
+
+#
+# Show logfile location.  By default, siege displays the
+# logfile location at the end of every run when logging
+# You can turn this message off with this directive.
+# ex: show-logfile = false
+#
+show-logfile = true
+
+#
+# Default logging status, true turns logging on.
+# ex: logging = true|false
+#
+logging = true
+
+#
+# Logfile, the default siege logfile is $PREFIX/var/siege.log
+# This directive allows you to choose an alternative log file.
+# Environment variables may be used as shown in the examples:
+# ex: logfile = /home/jeff/var/log/siege.log
+#     logfile = ${HOME}/var/log/siege.log
+#     logfile = ${LOGFILE}
+#
+logfile = ./siege.log
+
+#
+# HTTP protocol.  Options HTTP/1.1 and HTTP/1.0.
+# Some webservers have broken implementation of the
+# 1.1 protocol which skews throughput evaluations.
+# If you notice some siege clients hanging for
+# extended periods of time, change this to HTTP/1.0
+# ex: protocol = HTTP/1.1
+#     protocol = HTTP/1.0
+#
+protocol = HTTP/1.1
+
+#
+# Chunked encoding is required by HTTP/1.1 protocol
+# but siege allows you to turn it off as desired.
+# 
+# ex: chunked = true 
+# 
+chunked = true
+
+# 
+# Cache revalidation.
+# Siege supports cache revalidation for both ETag and 
+# Last-modified headers. If a copy is still fresh, the 
+# server responds with 304. 
+# HTTP/1.1 200   0.00 secs:    2326 bytes ==> /apache_pb.gif
+# HTTP/1.1 304   0.00 secs:       0 bytes ==> /apache_pb.gif
+# HTTP/1.1 304   0.00 secs:       0 bytes ==> /apache_pb.gif
+# 
+# ex: cache = true
+#
+cache = false
+
+#
+# Connection directive. Options "close" and "keep-alive"
+# Starting with release 2.57b3, siege implements persistent 
+# connections in accordance to RFC 2068 using both chunked
+# encoding and content-length directives to determine the 
+# page size. To run siege with persistent connections set
+# the connection directive to keep-alive. (Default close)
+# CAUTION: use the keep-alive directive with care.
+# DOUBLE CAUTION: this directive does not work well on HPUX
+# TRIPLE CAUTION: don't use keep-alives until further notice
+# ex: connection = close
+#     connection = keep-alive
+#
+connection = close
+
+#
+# Default number of simulated  concurrent users
+# ex: concurrent = 25
+#
+concurrent = 15
+
+#
+# Default duration of the siege.  The right hand argument has
+# a modifier which specifies the time units, H=hours, M=minutes,
+# and S=seconds. If a modifier is not specified, then minutes 
+# are assumed.
+# ex: time = 50M
+#
+# time =
+
+#
+# Repetitions.  The length of siege may be specified in client
+# reps rather then a time duration.  Instead of specifying a time
+# span, you can tell each siege instance to hit the server X number
+# of times.  So if you chose 'reps = 20' and you've selected 10 
+# concurrent users, then siege will hit the server 200 times.
+# ex: reps = 20
+#
+# reps = 
+
+#
+# Default URLs file, set at configuration time, the default
+# file is PREFIX/etc/urls.txt.  So if you configured siege
+# with --prefix=/usr/local then the urls.txt file is installed
+# int /usr/local/etc/urls.txt.  Use the "file = " directive to
+# configure an alternative URLs file. You may use environment
+# variables as shown in the examples below:
+# ex: file = /export/home/jdfulmer/MYURLS.txt
+#     file = $HOME/etc/urls.txt
+#     file = $URLSFILE
+#
+file = ./urls.txt
+
+#
+# Default URL, this is a single URL that you want to test. This
+# is usually set at the command line with the -u option.  When
+# used, this option overrides the urls.txt (-f FILE/--file=FILE)
+# option. You will HAVE to comment this out for in order to use
+# the urls.txt file option.
+# ex: url = https://shemp.whoohoo.com/docs/index.jsp
+#
+# url =
+
+#
+# Default delay value, see the siege(1) man page.  
+# This value is used for load testing, it is not used 
+# for benchmarking.
+# ex: delay = 3
+#
+delay = 1
+
+#
+# Connection timeout value. Set the value in seconds for 
+# socket connection timeouts. The default value is 30 seconds.
+# ex: timeout = 30
+#
+# timeout = 
+
+#
+# Session expiration: This directive allows you to delete all
+# cookies after you pass through the URLs. This means siege will
+# grab a new session with each run through its URLs. The default
+# value is false.
+# ex: expire-session = true
+#
+# expire-session = 
+
+#
+# Failures: This is the number of total connection failures allowed
+# before siege aborts. Connection failures (timeouts, socket failures, 
+# etc.) are combined with 400 and 500 level errors in the final stats, 
+# but those errors do not count against the abort total.  If you set 
+# this total to 10, then siege will abort after ten socket timeouts, 
+# but it will NOT abort after ten 404s. This is designed to prevent 
+# a run-away mess on an unattended siege. The default value is 1024
+# ex: failures = 50
+#
+# failures = 
+
+#
+# Internet simulation. If true, siege clients will hit
+# the URLs in the urls.txt file randomly, thereby simulating
+# internet usage.  If false, siege will run through the 
+# urls.txt file in order from first to last and back again.
+# ex: internet = true
+#
+internet = false
+
+#
+# Default benchmarking value, If true, there is NO delay
+# between server requests, siege runs as fast as the web
+# server and the network will let it.  Set this to false 
+# for load testing.
+# ex: benchmark = true
+# 
+benchmark = false
+
+#
+# Set the siege User-Agent to identify yourself at the
+# host, the default is: JoeDog/1.00 [en] (X11; I; Siege #.##) 
+# But that wreaks of corporate techno speak.  Feel free
+# to make it more interesting :-)  Since Limey is recovering
+# from minor surgery as I write this, I'll dedicate the 
+# example to him...
+# ex: user-agent = Limey The Bulldog
+# 
+# user-agent =
+
+#
+# Accept-encoding. This option allows you to specify 
+# acceptable encodings returned by the server. Use this
+# directive to turn on compression. By default we accept
+# gzip compression.
+#
+# ex: accept-encoding = *
+#     accept-encoding = gzip
+#     accept-encoding = compress;q=0.5;gzip;q=1
+accept-encoding = gzip
+
+#
+# TURN OFF THAT ANNOYING SPINNER!
+# Siege spawns a thread and runs a spinner to entertain you
+# as it collects and computes its stats. If you don't like 
+# this feature, you may turn it off here.
+# ex: spinner = false 
+#
+spinner = true
+
+#
+# WWW-Authenticate login. When siege hits a webpage
+# that requires basic authentication, it will search its 
+# logins for authentication which matches the specific realm 
+# requested by the server. If it finds a match, it will send 
+# that login information. If it fails to match the realm, it 
+# will send the default login information. (Default is "all"). 
+# You may configure siege with several logins as long as no
+# two realms match. The format for logins is:
+# username:password[:realm] where "realm" is optional.
+# If you do not supply a realm, then it will default to "all"
+# ex: login = jdfulmer:topsecret:Admin
+#     login = jeff:supersecret
+#
+# login = 
+
+#
+# WWW-Authenticate username and password.  When siege
+# hits a webpage that requires authentication, it will
+# send this user name and password to the server.  Note
+# this is NOT form based authentication.  You will have
+# to construct URLs for that.
+# ex: username = jdfulmer
+#     password = whoohoo
+#
+# username = 
+# password =
+
+#
+# ssl-cert
+# This optional feature allows you to specify a path to a client
+# certificate. It is not neccessary to specify a certificate in
+# order to use https. If you don't know why you would want one, 
+# then you probably don't need this feature.  Use openssl to 
+# generate a certificate and key with the following command:
+#   $ openssl req -nodes -new -days 365 -newkey rsa:1024 \
+#                 -keyout key.pem -out cert.pem
+# Specify a path to cert.pem as follows:
+# ex: ssl-cert = /home/jeff/.certs/cert.pem
+#
+# ssl-cert = 
+ 
+#
+# ssl-key
+# Use this option to specify the key you generated with the command
+# above. ex: ssl-key = /home/jeff/.certs/key.pem 
+# You may actually skip this option and combine both your cert and 
+# your key in a single file:
+#   $ cat key.pem > client.pem
+#   $ cat cert.pem >> client.pem
+# Now set the path for ssl-cert:
+# ex: ssl-cert = /home/jeff/.certs/client.pem
+# (in this scenario, you comment out ssl-key)
+#
+# ssl-key = 
+
+#
+# ssl-timeout 
+# This option sets a connection timeout for the ssl library
+# ex: ssl-timeout = 30
+# 
+# ssl-timeout = 
+
+#
+# ssl-ciphers
+# You can use this feature to select a specific ssl cipher
+# for HTTPs. To view the ones available with your library run
+# the following command: openssl ciphers
+# ex: ssl-ciphers = EXP-RC4-MD5
+#
+# ssl-ciphers = 
+
+#
+# Login URL. This is the first URL to be hit by every siege
+# client. This feature was designed to allow you to login to 
+# a server and establish a session. It will only be hit once
+# so if you need to hit this URL more then once, make sure it
+# also appears in your urls.txt file.
+#
+# ex: login-url = http://eos.haha.com/login.jsp POST name=jeff&pass=foo
+#
+# login-url = 
+
+#
+# Proxy protocol. This option allows you to select a proxy
+# server stress testing. The proxy will request the URL(s) 
+# specified by -u"my.url.org" OR from the urls.txt file.
+# 
+# ex: proxy-host = proxy.whoohoo.org
+#     proxy-port = 8080
+#
+# proxy-host = 
+# proxy-port = 
+
+#
+# Proxy-Authenticate. When scout hits a proxy server which
+# requires username and password authentication, it will this
+# username and password to the server. The format is username,
+# password and optional realm each separated by a colon. You
+# may enter more than one proxy-login as long as each one has
+# a different realm. If you do not enter a realm, then scout
+# will send that login information to all proxy challenges. If
+# you have more than one proxy-login, then scout will attempt
+# to match the login to the realm.
+# ex: proxy-login: jeff:secret:corporate
+#     proxy-login: jeff:whoohoo
+#
+# proxy-login = 
+
+#
+# Redirection support.  This option allows to to control
+# whether a Location: hint will be followed.  Most users
+# will want to follow redirection information, but sometimes
+# it's desired to just get the Location information.
+#
+# ex: follow-location = false
+#
+# follow-location = 
+
+# Zero-length data.  siege can be configured to disregard
+# results in which zero bytes are read after the headers.
+# Alternatively, such results can be counted in the final
+# tally of outcomes.
+#
+# ex: zero-data-ok = false 
+#
+# zero-data-ok =
+
+#
+# end of siegerc

tox.ini

@@ -1,9 +0,0 @@
-[tox]
-envlist = py
-
-[testenv]
-deps = -rrequirements.txt
-passenv =
-  S3TEST_CONF
-  S3_USE_SIGV4
-commands = pytest {posargs}