Recursive execute() calls can affect gas calculation.
This commit makes execute() be called only for real opcodes
and moves duplicate logic for CALL/JMP into a separate function.
1) Make timeout a timeout, don't do magic ping counts.
2) Drop additional timer from the main peer's protocol loop, create it
dynamically and make it disconnect the peer.
3) Don't expose the ping counter to the outside, handle more logic inside the
Peer.
Relates to #430.
We don't and we won't have synchronized clocks in the network so the only
timestamp that we can compare our local time with is the one made
ourselves. What this ping mechanism is used for is to recover from missing the
block broadcast, thus it's appropriate for it to trigger after X seconds of
the local time since the last block received.
Relates to #430.
In reality it will never be true exactly in the case where we want this ping
mechanism to work --- when the node failed to get a block from the net. It
won't get the header either and thus its block height will be equal to header
height. The only moment when this condition is met is when the node does
initial synchronization and this synchronization works just fine without any
pings.
Relates to #430.
Two queues for high-priority and ordinary messages. Fixes#590. These queues
are deliberately made small to avoid buffer bloat problem, there is gonna be
another queueing layer above them to compensate for that. The queues are
designed to be synchronous in enqueueing, async capabilities are to be added
layer above later.
Big.Int Bytes()/SetBytes() methods are not symmetric.
Moreover we need to mimic C# node behavior:
- if a positive number has MSB set, 0x00 byte should be appended
to distinguish positive number from negatives
- negative numbers should serialize as two's-complement
add pingInterval same as used in ref C# implementation with the same logic
add pingTimeout which is used to check whether pong received. If not -- drop the peer.
add pingLimit which is hardcoded to 4 in TCPPeer. It's limit for unsuccessful ping/pong calls (where pong wasn't received in pingTimeout interval)
It wasn't actually requesting transactions but rather sending an inventory
message telling everyone that we have them which is completely wrong and
easily leads to ChangeView that could be avoided.
When system and network pressure is high it can be beneficial
to use transactions which and were already proposed.
The assumption is that they will be in other node's memory pool
with more probability.
If blockchain is not closed, logging in defer can occur
after test has finished, which will lead to a panic with
"Log in goroutine after Test* has completed".
There is no point in encoding the output of this function in a WIF format,
most of the users actually want the real key and those who need a WIF can
easily get if from the key (and it's simpler than getting the key from the
WIF).
It also fixes a severe bug in NEP2Decrypt, base58 decoding errors were not
processed correctly.
Error in Seek means something is terribly wrong (e.g. db was not opened) and
error drop is not the right thing to do, because caller
will continue working with the wrong view.
buildMerkleTree() is internal to the hash package and if anyone calls it with
`len(leaves) == 0` he deserves a panic. As it's the only error case in it, we
can remove error value return from this function and simplify NewMerkleTree().
Turns out, our dApps use it a lot and we were going to the DB to get it which
is a useless waste of time. Technically we could also remove blockHeight here,
but not doing it at the moment as it's more involved.
It eliminates this time waste from the pprof graph, but doesn't change 1.4M ->
1.5M 100K mainnet block import test case in any noticeable way.
Preseed the scriptHash value when we already know it. Eliminates this time
waste from the pprof graph, but doesn't really change anything in the 1.4M ->
1.5M 100K mainnet blocks import test.
These don't belong to VM as they compile some Go code and run it in a VM. One
may call them integration tests, but I prefer to attribute them to
compiler. Moving these tests into pkg/compiler also allows to properly count
the compiler coverage they add:
-ok github.com/CityOfZion/neo-go/pkg/compiler (cached) coverage: 69.7% of statements
+ok github.com/CityOfZion/neo-go/pkg/compiler (cached) coverage: 84.2% of statements
This change also fixes `contant` typo and removes fake packages exposed to the
public by moving foo/bar/foobar into the testdata directory.
This solves two problems:
* adds support for shortened SYSCALL form that uses IDs (similar to #434, but
for NEO 2.0, supporting both forms), which is important for compatibility
with C# node and mainnet chain that uses it from some height
* reworks interop plugging to use callbacks rather than appending to the map,
these map mangling functions are clearly visible in the VM profiling
statistics and we want spawning a VM to be fast, so it makes sense
optimizing it. This change moves most of the work to the init() phase
making VM setup cheaper.
Caveats:
* InteropNameToID accepts `[]byte` because that's the thing we have in
SYSCALL processing and that's the most often usecase for it, it leads to
some conversions in other places but that's acceptable because those are
either tests or init()
* three getInterop functions are: `getDefaultVMInterop`, `getSystemInterop`
and `getNeoInterop`
Our 100K (1.4M->1.5M) block import time improves by ~4% with this change.
Fix duping and add tests.
C# node actually implements DUP in the same way we did, but it does create a
new element when accessing some particular value (like BigInt() or Bytes()) so
in the end this DUP implementation doesn't lead to any visible side-effects. In
our case I think it's more appropriate to fix the DUP (and its variants) itself
avoiding useless allocations in the VM.
Add `Roll` method to Stack that doesn't pop and push values and use it for
ROLL and ROT.
1.4M->1.5M 100K block import test before:
real 3m44,292s
user 5m43,494s
sys 0m34,741s
After:
real 3m40,449s
user 5m42,701s
sys 0m35,500s
Add `Swap` method to the Stack and use it for both SWAP and XSWAP. Avoid
element popping and pushing (and associated accounting costs).
1.4M->1.5M 100K block import test before:
real 3m51,885s
user 5m54,744s
sys 0m38,444s
After:
real 3m44,292s
user 5m43,494s
sys 0m34,741s
First of all, it was wrong, it was not checking for inputs really, it compared
tx hashes for some reason, second, when it did compare inputs it compared only
the PrevIndex part of them which is also wrong.
Also, there is absolutely no reason to go through GetVerifiedTransactions()
here, we don't need this copy of pointers and it can also be outdated by the
time we're to finish our check.
Before:
BenchmarkTXPerformanceTest-4
5000 485506 ns/op 65886 B/op 409 allocs/op
ok github.com/CityOfZion/neo-go/integration 3.212s
After:
enchmarkTXPerformanceTest-4
5000 371104 ns/op 44367 B/op 408 allocs/op
ok github.com/CityOfZion/neo-go/integration 2.712s
This simple change improves our BenchmarkTXPerformanceTest by 14%, just
because we don't waste time on reallocations during append().
Before:
10000 439754 ns/op 218859 B/op 428 allocs/op
ok github.com/CityOfZion/neo-go/integration 5.423s
After:
10000 369833 ns/op 87209 B/op 412 allocs/op
ok github.com/CityOfZion/neo-go/integration 4.612s
Creating a new BinReader for every instruction is a bit too much and it adds
about 1% overhead on block import (and actually is quite visible in the VM
profiling statistics). So use a bit more ugly but efficient method.
It's useless work being done before it's actually needed. These (updated with
new values) are going to be written with some kind of Put anyway, so writing
them here is just a waste of time.
We're spending a lot of time here, 100K blocks import starting at 1.4M, before
this patch:
real 4m17,748s
user 6m23,316s
sys 0m37,866s
After:
real 3m54,968s
user 5m56,547s
sys 0m39,398s
9% is quite a substantial improvement to justify this change.
Importing 100K blocks starting at 1.4M, before this patch:
real 6m0,356s
user 8m52,293s
sys 0m47,372s
After this patch:
real 4m17,748s
user 6m23,316s
sys 0m37,866s
Almost 30% better.
Do not fill verification script randomly as there is a probability
for it to be executed sucessfully.
time="2019-12-12T17:24:22+03:00" level=info msg="blockchain persist completed" blockHeight=0 headerHeight=0 persistedBlocks=0 persistedKeys=15 took="54.474µs"
time="2019-12-12T17:24:23+03:00" level=info msg="blockchain persist completed" blockHeight=0 headerHeight=0 persistedBlocks=0 persistedKeys=15 took="49.312µs"
2019-12-12T17:24:24.026+0300 DEBUG can't verify payload from #%d1 {"module": "dbft"}
--- FAIL: TestPayload_Sign (0.00s)
payload_test.go:302:
Error Trace: payload_test.go:302
Error: Should be false
Test: TestPayload_Sign
FAIL
coverage: 75.8% of statements
FAIL github.com/CityOfZion/neo-go/pkg/consensus 2.145s
It's a getter function and even though it's quite fancy with its transactions
processing (for consensus operation) it shouldn't ever change the state of the
Blockchain. If we're to change anything here these changes may conflict with
the actual block processing later or may lead to broken state (if transactions
won't be approved for some reason).
go vet is not happy about them:
pkg/io/binaryReader.go:92:21: method ReadByte() byte should have signature ReadByte() (byte, error)
pkg/io/binaryWriter.go:75:21: method WriteByte(u8 byte) should have signature WriteByte(byte) error
This seriously improves the serialization/deserialization performance for
several reasons:
* no time spent in `binary` reflection
* no memory allocations being made on every read/write
* uses fast ReadBytes everywhere it's appropriate
It also makes Fixed8 Serializable just for convenience.
add dao which takes care about all CRUD operations on storage
remove blockchain state since everything is stored on change
remove storage operations from structs(entities)
move structs to entities package
This change (closely related to the neo-project/neo#1321 proposal) speeds up
1.4M mainnet blocks import by 30%. Basically, we're eliminating key decoding
for block's multisignature that has the same keys most of the time.
Things I don't like about this patch:
* yet another parameter for verifyHashAgainstScript()
* vm keys are not copied in/out
But it's rather simple and solves the problem for this particular case, so I
think it's worth it.
It can't be really solved in many cases (it's used in P2P protocol and we have
to follow the usual conventions there) and in most of the cases we don't care
about the difference between nil slice and zero-length slice.
It makes very little sense having pointers here, these structures MUST have
some kind of key and this key is not gonna be wandering somewhere on its
own. Fixes a part of #519.
It reduces heap pressure a little for these elements as we don't have to
allocate/free them individually. And they're directly tied to transactions or
block, not being shared or anything like that, so it makes little sense for
them to be pointer-based. It only makes building transactions a little easier,
but that's obviously a minor usecase.
reflect.MethodByName is a rather expensive function especially when
called on hot path. This became obvious during profiling of db restore.
This commit replaces reflection with a cast to an interface.
Before this patch on block import we could easily be spending more than 6
seconds out of 30 in Uint256 encoding for UnspentBalance, now it's completely
off the radar.
Which speeds it up at least twofold for a typical 32-bytes write (and that's
for a very naïve test that allocates new BufBinWriter on every iteration):
pkg: github.com/CityOfZion/neo-go/pkg/io
BenchmarkWriteBytes-8 10000000 124 ns/op
BenchmarkWriteBytesOld-8 5000000 251 ns/op
When 74590551 introduced this code we had no proper caching layer, so there
were these strange fallbacks in the code. fc0031e5 should'd removed them, but
failed to do so, so do it now and fix processing of transactions that touch
storage for the same key (address) in the same block.
To use opcode definitions you have to import whole vm package that you might
not care about at all. So this moves opcodes to their own package under vm, fixes
and deduplicate related code and moves compiler package up one level.
Drop wif.GetVerificationScript(), drop
smartcontract.CreateSignatureRedeemScript(), add GetVerificationScript()
directly to the PublicKey and use it everywhere.
This allows easier reuse of opcodes and in some cases allows to eliminate
dependencies on the whole vm package, like in compiler that only needs opcodes
and doesn't care about VM for any other purpose.
And yes, they're opcodes because an instruction is a whole thing with
operands, that's what context.Next() returns.
Only request headers from the other peer if his height is bigger than
ours. Otherwise we routinely ask 0-height newcomers for some random headers
that they know nothing about.
This one is essential for the consensus nodes as otherwise they won't give out
the blocks they generate making their generation almost useless. It also makes
our networking part more complete.
We have a race between reader and writer goroutines for the same connection
that leads to handshake failures when reader is faster to read the incoming
version (and try to reply to it) than writer is to write our own Version:
WARN[0000] peer disconnected addr="172.200.0.4:20334" peerCount=5 reason="invalid handshake: tried to send VersionAck, but didn't send Version yet
Fix it by moving Version sending before the reader loop starts.
Commit c80ee952a1 removed temporary store used
to contain changes of the block being processed. It's wrong in that the block
changes should be applied to the database in a single transaction so that
there wouldn't be any intermediate state observed from the outside (which is
possible now). Also, this made changes commiting persist them to the
underlying store effectively making our persist loop a no-op (and not
producing `persist completed` log lines that we love so much).
Param getters were redone to return errors because otherwise bad FuncParam
values could lead to panic. FuncParam itself might be not the most elegant
solution, but it works good enough for now.
This PR does 3 things:
adds array parameter unmarshalling
extend Param with convenient methods
refactor tests into using tables to make it easier add new tests
(part of #347 solution)
add processing of validators while block persist;
add validator structure with decoding/encoding;
add validator get from store;
add EnrollmentTX and StateTX processing;
add pubkey decode bytes, unique and contains functions;
Fixes failure to process transaction from the block when it was relayed
initially:
WARN[0788] blockQueue: failed adding block into the blockchain blockHeight=7270 error="transaction 35088916403e5cf2152e16c3bc6e0fba20c955fba38543b9fa5c50a3d3a4ace5 failed to verify: invalid transaction due to conflicts with the memory pool" nextIndex=7271
WARN[0790] blockQueue: failed adding block into the blockchain blockHeight=7270 error="transaction 35088916403e5cf2152e16c3bc6e0fba20c955fba38543b9fa5c50a3d3a4ace5 failed to verify: invalid transaction due to conflicts with the memory pool" nextIndex=7271
WARN[0790] blockQueue: failed adding block into the blockchain blockHeight=7270 error="transaction 35088916403e5cf2152e16c3bc6e0fba20c955fba38543b9fa5c50a3d3a4ace5 failed to verify: invalid transaction due to conflicts with the memory pool" nextIndex=7271
Right now message can be written in several Write's so
concurrent calls of writeMsg() can in theory interleave.
This commit fixes it.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
When encountering already seen stack item we should fail
only if it is a collection. Duplicate Integers or ByteArrays are ok
because they can't lead to recursion.
If we're to receive some 500 headers (less than `headerBatchCount`) and quit
before receiving more of them we end up with clean `bc.headerList` that will
be inited going backwards to the `targetHash`, but code path doesn't add add
the `targetHash` itself which it should do in this particular case, otherwise
we end with no genesis block hash in the list.
Otherwise the node might crash in `startProtocol` because of missing Version
field in the peer. And it also keeps the sequence correct, Version MUST be
sent first and ACKs can only follow it.
Missing it the following line could fail on subsequent restarts:
currHeaderHeight, currHeaderHash, err := storage.CurrentHeaderHeight(bc.store)
if the node was stopped before any headers had been received.
VM: Use JSON-based tests from neoVM
After the implementation of stack limits nothing is needed for us to pass reference JSON tests :)
The only thing that differs --- we do not compare stack in case of FAULT (which matches NEO 3 behavior).
Also two commits were reverted to match 2.x VM behavior.
Our node didn't respect the MaxPeers setting, fix it with a drop of random
connection when this limit is reached (to give a chance for newcomers to
communicate), but also introduce AttemptConnPeers setting to tune the number
of attempted connections.
This also raises the default MaxPeers for testnet/mainnet to 100, because
neo-go nodes love making friends.
This allows to start handshaking from both client and server (mainnet/testnet
nodes were seen to not care about string ordering for it), but still maintains
some sane checks in the process. It also makes functions thread-safe because
we have two goroutines servicing read and write side of the Peer connection,
so they can clash on access to the struct fields.
Add a test for it also.
There is a difference in interpretation of what a block count is. neo-go nodes
currently respond to this request with the latest block number which is the
same number that neoscan.io shows. However, C# nodes deliberately do add one
to this number when answering to the getblockcount request to account for the
genesis block number 0.
This patch makes us consistent with C# nodes wrt to getblockcount behaviour.
This one enables our RPC to be called from the browser if there is a
need. It's insecure and not standards-compliant, thus this behaviour is
configurable is not enabled by default. It makes our node with this workaround
enabled compatible with neo-mon monitoring.
Originally debugged by @anatoly-bogatyrev in #464.
Extend Blockchainer with one more method to spawn a VM for test runs and use
it to run scripts. Gas consumption is not counted or limited in any way at the
moment (see #424).
Make inspect work with avms by default and with go files if told so. In the
end this makes our CLI interface more consistent and usable. Drop useless
CompileAndInspect() compiler method along the way.
Keeping run() as the owner of all maps would mean adding at least three more
channels to keep address getters with thread-safety. But then there also is a
race between requestToWork() and run() which is way harder to solve with
channels because there are lots of possibilities for deadlocks. So rework all
of this with good old mutexes.
While at it, fix `requestCh` handling in the inner select of run, it will waste
one loop to handle it, so we should add one to the `requested`.
Fixes#445.
Wrong bits were used to represent flags which is important for contracts
created via interop. Fixes contracts failing to store things:
WARN[16278] contract invocation failed block=3773025 err="error encountered at instruction 3435 (SYSCALL): failed to invoke syscall: contract c9d870d7857e956d82290d5df19de3133c107815 can't have storage" tx=fa695eea240b7b4dbb6f42ea6335447a764d8b629c40b7812ea3bca16b1f098d
WARN[16278] contract invocation failed block=3773025 err="error encountered at instruction 1279 (SYSCALL): failed to invoke syscall: contract 97210e7c98582151ceb37f9748c9a1d27d9ae6fd can't have storage" tx=0144d84038149fa0cf1f7912f7d5854fa5f3670f5b4217789c1441f9fd52d27b
NewInvocationTX() returned a version number one transaction that actually
failed to pass that version down to the invocation data which lead to
serialization/deserialization inconsistency.
VM should be responsible for code execution and in case anyone interested in additional logging or errors they could handle them like we do it iin cli.
When performing NEWARRAY on a Struct or NEWSTRUCT on a Array,
underlying slice needs to be copied, because when it's capacity
doesn't matches it's length, underlying storage will be used
for appends even if it is already pointed at by another slice.
We're about stored values here, so print those, which avoids blocking in
bc.HeaderHeight() and removes duplication between blockHeight and
persistedHeight. Fixes saving the blockchain on exit (deferred function in
Run() blocked in persist()).
Test modification was required because storeBlocks() doesn't actually save
headers and thus TestGetTransaction started to fail on persist().
If you're to sync less than 2000 headers no batched header key-value is
gonna be written into the DB and init() would panic because
bc.headerList.Len() would return 0. Use genesis block as a target in this
case.
Goreport:
neo-go/pkg/core/contract_state_test.go
Line 21: warning: "Contracto" is a misspelling of "Contraction" (misspell)
Line 64: warning: "Contracto" is a misspelling of "Contraction" (misspell)
neo-go/pkg/core/interop_neo.go
Line 420: warning: "succeedes" is a misspelling of "succeeds" (misspell)
neo-go/pkg/network/discovery.go
Line 118: warning: "succeded" is a misspelling of "succeeded" (misspell)
Line 128: warning: "successfuly" is a misspelling of "successfully" (misspell)
golint:
pkg/io/binaryrw_test.go:25:11: should omit type []byte from declaration of var bin; it will be inferred from the right-hand side
pkg/io/binaryrw_test.go:42:11: should omit type []byte from declaration of var bin; it will be inferred from the right-hand side
pkg/io/binaryrw_test.go:118:7: should omit type string from declaration of var str; it will be inferred from the right-hand side
golint suggests:
pkg/network/payload/address.go:48:12: should omit type net.IP from declaration of var netip; it will be inferred from the right-hand side
It's a temporary stub until proper encoding/decoding is implemented. It's
useful for testnet/mainnet connections because without it consensus message
receival leads to peer disconnection.
It's bogus and no other node implementation has anything like that. It fires
up for no good reason in the case when some other node connects to us and it
obviously doesn't use its listening port for it.
commit methods duplicated putSmthIntoStore functions, but have MemCachedStore
now that can easily substitute for a Batch, especially given that interop
needs something like that for its storage purposes anyway.
This adds the following verifications:
* merkleroot check
* index check
* timestamp check
* witnesses verification
VerifyWitnesses is also renamed to verifyTxWitnesses here to not confuse it
with verifyBlockWitnesse and to hide it from external access (no users at the
moment).
Linter isn't happy with our recent changes:
pkg/core/contract_state.go:109:1: receiver name cs should be consistent with previous receiver name a for ContractState
pkg/core/contract_state.go:114:1: receiver name cs should be consistent with previous receiver name a for ContractState
pkg/core/contract_state.go:119:1: receiver name cs should be consistent with previous receiver name a for ContractState
But actually `a` here most probably is a copy-paste from AssetState methods,
so fit the old code to match the new one.
Enable transaction verification for privnets and tests, testnet can't
successfuly verify block number 316711 with it enabled and mainnet stops at
105829.
We want to get a full block, so it has to have transactions
inside. Unfortunately our tests were used to this wrong behavior and utilized
completely bogus transactions without data that couldn't be persisted, so fix
that also.
PublishTX only had one of these flags, but newer contracts (created via the
interop function) can have more and these flags are aggregated into one field
that uses PropertyState enumeration (it's used to publish contract, so
supposedly it's also a nice choice for contract state storage).
It's used a lot and it looks a lot like MemoryStore, it just needs not to
return errors from Put and Delete, so make it use MemoryStore internally with
adjusted interface.
Make it look more like a real transaction, put/delete things with a single
lock. Make a copy of value in Put also, just for safety purposes, no one knows
how this value slice can be used after the Put.
Using pointers is just plain wrong here, because the batch can be updated with
newer values for the same keys.
Fixes Seek() to use HasPrefix also because this is the intended behavior.
