If port is dynamically allocated, `(*Server).Addr` will contain
0 port. This commit executes listener before exiting from `Start()`
and sets Addr to the actual address.
We're at the point where even this code can clearly be seen in profiles. We
can save on some buffers (and CPU cycles) by encoding the answer once.
Another ~2% TPS for single node.
Time is not really relevant for us here and we don't use this timestamp in any
way. Yet it occupies 24 bytes and we do two clock_gettime calls to get it.
Replace it with blockStamp which is going to be used in the future for
transaction retransmissions.
It allows to improve single-node TPS by another 3%.
To calculate network fee properly we must know type of every
signer (simple, multisig, contract). Providing scripts is the most
simple and flexible way to know this.
C# node is quite picky as it expects there to be exactly one value returned,
but our testchain actually adds 4 signatures for multisig cases instead of 3
which makes it technically incompatible with C# node.
As it's returned sorted now. Fixes state change mismatch for
NextValidators. It also partially reverts
2f8e7e4d33 and significantly changes the test
chain as the fees are no longer being sent to the same account.
It's not needed any more with Go 1.13 as we have wrapping/unwrapping in base
packages. All errors.Wrap calls are replaced with fmt.Errorf, some strings are
improved along the way.
Allow to invoke methods by offset:
1. Every invoked contract must have manifest.
2. Check arguments count on invocation.
3. Change AppCall to a regular syscall.
4. Add test suite for `System.Contract.Call`.
GetScriptContainer() interop can try to get this transaction and this attempt
will lead to hash calculation with transaction serialization, but transaction
can't be successfully serialized if it doesn't have a script set, so this
makes test invocations fail.
We were accepting transactions with zero system fee, but we shouldn't do
that. Also, transaction's verification execution has to be limited by network
fee.
Implement (*Param).GetBoolean() for converting parameter to bool value.
It is used for verbosity flag and is false iff it is either zero number
or empty sting.
This error message makes no sense when shutting down the server:
2020-06-25T19:29:53.251+0300 ERROR failed to start RPC server {"error": "http: Server closed"}
And ListenAndServer is documented to always return non-nil error one of which
is http.ErrServerClosed. This should also fix the following test failure:
==================
WARNING: DATA RACE
Read at 0x00c000254243 by goroutine 49:
testing.(*common).logDepth()
/usr/local/go/src/testing/testing.go:665 +0xa1
testing.(*common).Logf()
/usr/local/go/src/testing/testing.go:658 +0x8f
testing.(*T).Logf()
<autogenerated>:1 +0x75
go.uber.org/zap/zaptest.testingWriter.Write()
/go/pkg/mod/go.uber.org/zap@v1.10.0/zaptest/logger.go:130 +0x11f
go.uber.org/zap/zaptest.(*testingWriter).Write()
<autogenerated>:1 +0xa9
go.uber.org/zap/zapcore.(*ioCore).Write()
/go/pkg/mod/go.uber.org/zap@v1.10.0/zapcore/core.go:90 +0x1c3
go.uber.org/zap/zapcore.(*CheckedEntry).Write()
/go/pkg/mod/go.uber.org/zap@v1.10.0/zapcore/entry.go:215 +0x1e7
go.uber.org/zap.(*Logger).Error()
/go/pkg/mod/go.uber.org/zap@v1.10.0/logger.go:203 +0x95
github.com/nspcc-dev/neo-go/pkg/rpc/server.(*Server).Start()
/go/src/github.com/nspcc-dev/neo-go/pkg/rpc/server/server.go:179 +0x5c5
Previous write at 0x00c000254243 by goroutine 44:
testing.tRunner.func1()
/usr/local/go/src/testing/testing.go:900 +0x353
testing.tRunner()
/usr/local/go/src/testing/testing.go:913 +0x1bb
Goroutine 49 (running) created at:
github.com/nspcc-dev/neo-go/pkg/rpc/server.initClearServerWithInMemoryChain()
/go/src/github.com/nspcc-dev/neo-go/pkg/rpc/server/server_helper_test.go:69 +0x305
github.com/nspcc-dev/neo-go/pkg/rpc/server.initServerWithInMemoryChain()
/go/src/github.com/nspcc-dev/neo-go/pkg/rpc/server/server_helper_test.go:78 +0x3c
github.com/nspcc-dev/neo-go/pkg/rpc/server.testRPCProtocol()
/go/src/github.com/nspcc-dev/neo-go/pkg/rpc/server/server_test.go:805 +0x53
github.com/nspcc-dev/neo-go/pkg/rpc/server.TestRPC.func1()
/go/src/github.com/nspcc-dev/neo-go/pkg/rpc/server/server_test.go:793 +0x44
testing.tRunner()
/usr/local/go/src/testing/testing.go:909 +0x199
Goroutine 44 (finished) created at:
testing.(*T).Run()
/usr/local/go/src/testing/testing.go:960 +0x651
github.com/nspcc-dev/neo-go/pkg/rpc/server.TestRPC()
/go/src/github.com/nspcc-dev/neo-go/pkg/rpc/server/server_test.go:792 +0x5d
testing.tRunner()
/usr/local/go/src/testing/testing.go:909 +0x199
==================
ValidatorsCount is not initialized at block 0 with C# node (the first voter
initializes it) and until that initialization happens the standby validators
list is being returned as is without sorting.
Fixes state mismatch for the key ffffffff0e00000000000000000000000000000001 in
the first blocks.
It also affects tests as now the first validator is different and it receives
the network fees.
There is no such thing as high/low priority transactions, as there are
no free transactions anymore and they are ordered by fees contained
in transaction itself.
Closes#1063.
It's just JSON, io.Serializable is only used for DB storage where the length
should be obtained from the stream. Fixes:
2020-06-18T22:14:10.571+0300 WARN contract invocation failed {"tx": "1ffd475a9c246495d6206cb80a9a78e9d14a433ded60cd37aa87d897655606e1", "block": 25893, "error": "error encountered at instruction 3696 (SYSCALL): failed to invoke syscall: invalid character ':' after top-level value"}
We make it explicit in the appropriate Block/Transaction structures, not via a
singleton as C# node does. I think this approach has a bit more potential and
allows better packages reuse for different purposes.
1. Remove GetScript, IsPayable, GetStorageContext.
2. Revert 82319538 related to GetStorageContext.
3. Rename Migrate to Update.
4. Move remaining to System.Contract.*.
Related #1031.
Two changes being done here, because they require a lot of updates to
tests. Now we're back into version 0 and we only have one type of
transaction.
It also removes GetType and GetScript interops, both are obsolete in Neo 3.
Our block.Block was JSONized in a bit different fashion than result.Block in
its NextConsensus and Index fields. It's not good for notifications because
third-party clients would probably expect to see the same format. Also, using
completely different Block representation is probably making our client a bit
weaker as this representation is harder to use with other neo-go components.
So use the same approach we took for Transactions and wrap block.Block which is
to be serialized in proper way.
Fix `Script` JSONization along the way, 3.0 node wraps it within `witnesses`.
Note that the protocol differs a bit from #895 in its notifications format,
to avoid additional server-side processing we're omitting some metadata like:
* block size and confirmations
* transaction fees, confirmations, block hash and timestamp
* application execution doesn't have ScriptHash populated
Some block fields may also differ in encoding compared to `getblock` results
(like nonce field).
I think these differences are unnoticieable for most use cases, so we can
leave them as is, but it can be changed in the future.
It will be important for proper subscription testing and it doesn't hurt even
though technically we've got two http servers listening after this change (one
is a regular Server's http.Server and one is httptest's Server). Reusing
rpc.Server would be nice, but it requires some changes to Start sequence to
start Listener with net.Listen and then communicate back its resulting
Addr. It's not very convenient especially given that no other code needs it,
so doing these changes just for a bit cleaner testing seems like and
overkill.
Update config appropriately. Update Start comment along the way.
1. Slot is a new mechanism for storing variables during execution
which is more convenient than alt.stack. This commit implements
support for slot opcodes in both vm and compiler.
2. Remove old alt.stack opcodes.
3. Do not process globals at the start of every function, but instead
load them single time at main.
Rename THROWIFNOT to ASSERT, add ABORT opcode.
ABORT cannot be caught, but the implementation should be postponed until
exception handling is implemented.
The original intention here was to check for server reaction in presence of
validation errors (response.ErrValidationFailed) and it was very easy to make
validation fail for block without transactions in Neo 2. But in Neo 3
transactionless blocks are perfectly valid (see
29d321b5e1) which broke this test even though we
didn't see it until websocket addition (which required
8cec6694ae to make this test work initially).
So make a valid block and then spoil its verification script.
1. Dropped `Base.ConsensusData` block field
2. Added `Block.ConsensusData` field with `Nonce` and `PrimaryIndex`
3. Removed "Neo.Header.GetConsensusData" and
"AntShares.Header.GetConsensusData" interops
Our test chain is used in core,rpc and (in future) interop packages.
It is better to have all related declarations in one place to avoid
code duplication.
In NEO3 SYSCALL opcode has 4-byte ID parameter.
This commit removes support for string-based syscalls and
changes SYSCALL's parameter to be fixed 4-byte value.
1. closes#841
2. Commented out test cases where binary transaction are used.
These test cases marked with `TODO NEO3.0: Update binary` and need to be
updated.
3. Updated other tests.
4. Added cache to calculateValidUntilBlock() RPC-client method.
1. Closes#840: added Nonce field to transaction.Transaction and
removed Nonce field from transaction.MinerTx
2. Added following methods to different tx types:
- NewMinerTx()
- NewMinerTxWithNonce(...)
- NewEnrollmentTx(...)
- NewIssueTx()
- NewPublishTx(...)
- NewRegisterTx(...)
- NewStateTx(...)
in order to avoid code duplication when new transaction is created.
3. Commented out test cases where binary transaction/block are used.
These test cases marked with `TODO NEO3.0: Update binary` and need to be
updated.
4. Updated other tests
5. Added constant Nonce to GoveringTockenTx, UtilityTokenTx and genesis
block to avoid data variability. Also marked with TODO.
