In some places we panic, in some we return error, in some (audit) just return a client.
However in all of the places static client is created immediately before
the sugared-client creation.
This commit makes all constructors to just return a client for the sake
of code simplification and unification.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
We don't use custom names and the only place where custom method option
is used it provides the default name and can be omitted.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
It is much more convenient to skip source creation.
Also fix some bugs:
1. `cryptoSource.Int63()` now returns number in [0, 1<<63) as required
by `rand.Source` interface.
2. Replace `cryptoSource.Uint63()` with `cryptoSource.Uint64` to allow
generate uint64 numbers directly (see rand.Source64 docs).
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
In notary disabled environment, approval of container creation with nice
name attribute takes much more additional GAS than other operations
(due to NNS invocation).
Morph library changes:
* add the ability to specify per-op fees using `StaticClient` options;
* add the ability to customize fee for `Put` operation with named
container in container morph client.
Inner Ring changes:
* add `fee.named_container_register` config value which specifies
additional GAS fee for the approvals of the named container
registrations;
* pass the config value to `WithCustomFeeForNamedPut` option of
container morph client.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Use persistent flags on parent command in order to inherit flags in
sub-commands. Turn on notary mode of morph client in `subnet` command of
admin utility for notary environments.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make `Client.EnableNotarySupport` method to call `NNSContractAddress`
for proxy contract if it is not specified in corresponding option.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Add `subnet` command which contains all subnet-related commands. Add
sub-commands:
* `create` for creation;
* `remove` for removal;
* `get` for reading;
* `admin` for admin management;
* `client` for client management.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Define notification events, implement parsers. Add morph client of
Subnet contract. Listen, verify and approve events in Inner Ring app.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Add optional parameters to the client call
signature. Group parameters of a client call
into struct to improve future codebase
support.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Add optional parameters to the client call
signature. Group parameters of a client call
into struct to improve future codebase
support.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Also, add ErrNNSRecordNotFound error that
indicates that required hash is not presented
in `NNS` contract.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Do not set `till` as some constant:
use maximum of two values instead:
1. currentDepositTill;
2. currentHeight+epochDuration+constant.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Add name and zone arguments to `Put` method of wrapper over the Container
contract client. Pass result of `container.GetNativeNameWithZone` function
to the method in `Put` helper function. Due to this, the storage node will
call the method depending on the presence of the container name in the
attributes.
Make IR to listen `putNamed` notification event. The event is processed like
`put` event, but with sanity check of the container attributes.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Add `PutArgs.SetNativeNameWithZone` method which sets native name and zone
for container. Call `putNamed` method of Container contract if name is set,
otherwise call `put` method.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement `Client.ListConfig` method which calls `listConfig` method of
Netmap contract. Implement `Wrapper.IterateConfigParameters` method which
uses previous one. Implement `wrapper.WriteConfig` helper function which
allows to interpret parameters by names.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There is a need to inherit some methods of `StaticClient` type. In order to
not inherit all method via type embedding we can group sub-set of methods
and inherit it.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Add `NotarySignAndInvokeTX` method to morph
client. This function allows invoking notary
request with passed main TX(not creating a
new one). It signs passed main TX with
client's key.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Add `NotaryInvokeNotAlpha` to low-level
client. It creates and sends notary request
that must be signed by Alphabet nodes, but
does not sign it by current node's private
key.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
`fallbackTime` is delta b/w `ValidUntilBlock` of
the main transaction and block when `fallback`
transaction is sent.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Caching is performed inside `GetNativeContractHash` method of neo-go client,
so the additional cache level is redundant.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There is no need to continue iterating over Neo RPC endpoints in case of
some address-independent error (e.g. NeoFS logic error).
Unwrap and immediately return `neofsError` errors from loop in
`iterateClients`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement `error` interface on new `neofsError` type which is a wrapper over
NeoFS-specific error. Wrap all `Client` errors except neo-go client API ones
into `neofsError`. Wrapped errors are going to be used for multi-endpoint
loop control.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Since morph `Client` works in multi-client mode, there is an error case when
we can not get network magic when all endpoints are unavailable.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There is a need to work with a set of Neo RPC nodes in order not to depend
on the failure of some nodes while others are active.
Support "multi-client" mode of morph `Client` entity. If instance is not
"multi-client", it works as before. Constructor `New` creates multi-client,
and each method performs iterating over the fixed set of endpoints until
success. Opened client connections are cached (without eviction for now).
Storage (as earlier) and IR (from now) nodes can be configured with multiple
Neo endpoints. As above, `New` creates multi-client instance, so we don't
need initialization changes on app-side.
`Wait` and `GetDesignateHash` methods of `Client` return an error from now
to detect connection errors. `NotaryEnabled` method is removed as unused.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Do not read `without_notary` config value from env.
Make morph client constructor return client without
notary support. Enabling notary support should be done
with public `EnableNotarySupport` method separately.
Notary availability is deducted with client. Further,
if notary is presented on chain its support is
enabled at the corresponding client.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Add initialization of `updateInnerRing` method name
in config on startup.
Rename var `setInnerRing` => `updateInnerRing`.
Rename method `SetInnerRing` => `UpdateInnerRing`
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Add `netmapCandidates` method to `netmap` client
wrapper. Method parses node storages candidates
for the next epoch.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
The only thing we need hashes for is to process notifications.
Balance contract if left for now, as it has some initialization.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Test invocations are used in `Invoke` method to calculate
consumed gas. We can check return code and return error
if panic happened in contract.
This is already done the same way in `TestInvoke` method.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Pass `TryNotary()` option to constructor of the static client of the NeoFS
ID contract in `NewFromMorph`. This will allow to use client wrapper for key
management in IR application.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement method `ClientWrapper.ManageKeys` method which provides the
interface to add/remove keys to/from NeoFS account.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement `AddKeys` / `RemoveKeys` methods to call `addKey` / `removeKey`
methods of NeoFS ID contract.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement wrapper over NeoFS contact's client which allows you to
conveniently interact with the contract. Implement `ManageKeys` method
for binding or unbinding public keys to the NeoFS account.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement NeoFS contact's client which is responsible for collecting call
arguments and parsing stack items. Initially key binding and unbinding are
supported.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
`bindKey` parameter of `Put` method of `Container` contract was removed in
latest version.
Do not pass bind key of type `[]byte` to `Put` invocation. Remove no longer
needed field from `PutArgs`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
