There is a need to refill Metabase data with the objects from BlobStor.
Implement `refillMetabase` method which iterates over all objects from
BlobStor and saves them in Metabase.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There is a need to be able to process all objects saved in `BlobStor`.
Implement `BlobStor.Iterate` method which iterates over all objects.
Implement `IterateBinaryObjects` and `IterateObjects` helper functions to
simplify the code.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There is a need to be able to process all stored objects saved in
`Blobovnicza`.
Implement `Blobovnicza.Iterate` method which iterates over all objects.
Implement `IterateObjects` helper function to simplify the code.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In the previous implementation of the metabase, there was no possibility of
reinitializing the metabase: clearing information about existing objects and
bringing it back to its initial state. This operation can be useful in
cases when the stored metadata about objects has lost (or possibly lost)
relevance, and you need to generate data from scratch. Also at the
initialization stage, static resources of the base were not created -
container-independent buckets.
Make `Metabase.Init` method to allocate graveyard, container-size and
to-move-it buckets in underlying BoltDB instance. Implement `Metabase.Reset`
method: it works like `Init` but clean up all static buckets and removes
other ones. Due to the logical similarity, the methods share a single piece
of code.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There is a need to limit disk space used by write-cache. It is almost
impossible to calculate the value exactly. It is proposed to estimate the
size of the cache by the number of objects stored in it.
Track amounts of objects saved in DB and FSTree separately. To do this,
`ObjectCounters` interface is defined. It is generalized to a store of
numbers that can be made persistent (new option `WithObjectCounters`). By
default DB number is calculated as key number in default bucket, and FS
number is set same to DB since it is currently hard to read the actual value
from `FSTree` instance. Each PUT/DELETE operation to DB or FS
increases/decreases corresponding counter. Before each PUT op an overflow
check is performed with the following formula for evaluating the occupied
space: `NumDB * MaxDBSize + NumFS * MaxFSSize`. If next PUT can cause
write-cache overflow, object is written to the main storage.
By default maximum write-cache size is set to 1GB.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There is a need to keep track of each local storage change. Log messages are
the most convenient way to do it.
Implement function which writes log message about the completed writing
operation in storage engine.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Do not pass high level `PACK` opcode to
notary parsers. Add opcode amount check.
Delete `PACK` cases in notary parsers.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Make `errIncompletePut` to be a structure which wraps single client error.
Wrap error of the last client into `errIncompletePut` during placement
execution.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation Object service's handler returned const error in
case of failure (full or partial) of PUT operation. This did not even allow
us to roughly guess what the reason is. Not as a complete solution, but to
alleviate some cases where all nodes in a container return the same error,
it is suggested to return the error of the last server that responded.
Return latest server error from placement loop of `iteratePlacement` method
of `distributedTarget` type.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation sticky bit could disrupt access of container
nodes to replication. According to NeoFS specification sticky bit should not
affect the requests sent by nodes from SYSTEM group.
Add role check to `stickyBitCheck`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Remote RPC node might be in the transition state and produce
events from the past. We should avoid listening such nodes.
To do that subscriber component can await minimal height of
remote node. If minimal height is not reached, then throw
error.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Implement `NotaryContractProcessor` by IR
container processor. Add support for notary
`put` container operation. Do not parse `put`
non-notary notifications in notary enabled
environment.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Add `NotarySignAndInvokeTX` method to morph
client. This function allows invoking notary
request with passed main TX(not creating a
new one). It signs passed main TX with
client's key.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Add `NotaryInvokeNotAlpha` to low-level
client. It creates and sends notary request
that must be signed by Alphabet nodes, but
does not sign it by current node's private
key.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Add preparator for notary requests. Is parses
raw notary requests, checks if it should be
handled by Alphabet node. If handling is required,
returns `NotaryEvent` that contains information
about contract scripthash, method name and
arguments of the call.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Prepare all listening structures for notary events:
rename(add prefix/suffix 'notification') all
notification specific handlers/parsers.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
`fallbackTime` is delta b/w `ValidUntilBlock` of
the main transaction and block when `fallback`
transaction is sent.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
In recent changes, the locality criterion for a node has been changed to
compare public keys.
Remove no longer used `IsLocalAddress` function and `LocalAddressSource`
interface.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Some software components regulate the way of working with placement arrays
when a local node enters it. In the previous implementation, the locality
criterion was the correspondence between the announced network address
(group) and the address with which the node was configured. However, by
design, network addresses are not unique identifiers of storage nodes in the
system.
Change comparisons by network addresses to comparisons by keys in all
packages with the logic described above. Implement `netmap.AnnouncedKeys`
interface on `cfg` type in the storage node application.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Announced keys of storage nodes are required for many application components
to function.
Define a unified interface for the utility for working with public keys of
nodes. Add a method to check if the key has been advertised by the local
node in the application context.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There is a need to process public keys of the placement result.
Implement `Node.PublicKey` method which returns storage node's key announced
in netmap.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation `placement.Traverser.Next` method returned slice
of `network.AddressGroup` elements. There is a need to process keys of
storage nodes besides network addresses for intra-container communication.
Wrap `network.AddressGroup` in a new type `placement.Node` that summarizes
the storage node information required for communication. Return slice of
`Node` instances from `Traverser.Next` method. Fix compilation breaks in
dependent packages.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
IDs come from NeoFS contract in big endian, but it is customary to write in
the node logs in little endian.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Shard should try to read object headers from write-cache if it is enabled.
Extend `writecache.Cache` interface with `Head` method. Call the method in
`Shard.Head` if `Shard.hasWriteCache` returns true.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Write cache should be able to execute HEAD operations according to spec.
Add simple implementation of `Head` method through the `Get` one. Leave
notes for future optimization.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Caching is performed inside `GetNativeContractHash` method of neo-go client,
so the additional cache level is redundant.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There is no need to continue iterating over Neo RPC endpoints in case of
some address-independent error (e.g. NeoFS logic error).
Unwrap and immediately return `neofsError` errors from loop in
`iterateClients`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement `error` interface on new `neofsError` type which is a wrapper over
NeoFS-specific error. Wrap all `Client` errors except neo-go client API ones
into `neofsError`. Wrapped errors are going to be used for multi-endpoint
loop control.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Since morph `Client` works in multi-client mode, there is an error case when
we can not get network magic when all endpoints are unavailable.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There is a need to work with a set of Neo RPC nodes in order not to depend
on the failure of some nodes while others are active.
Support "multi-client" mode of morph `Client` entity. If instance is not
"multi-client", it works as before. Constructor `New` creates multi-client,
and each method performs iterating over the fixed set of endpoints until
success. Opened client connections are cached (without eviction for now).
Storage (as earlier) and IR (from now) nodes can be configured with multiple
Neo endpoints. As above, `New` creates multi-client instance, so we don't
need initialization changes on app-side.
`Wait` and `GetDesignateHash` methods of `Client` return an error from now
to detect connection errors. `NotaryEnabled` method is removed as unused.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
As soon as resulting list and cache operate with the attribute pointer,
we can add attribute structure immediately and set restored key and
value of the attribute later.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Attributes are linked to each other through parents, so they can
be returned in any order. However, it will be better to return
the list in consistent order to reduce entropy.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Parser should reuse existing attributes from the cache to update list
of the parent links in it. Parent links should be unique.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
In previous implementation Container service handlers didn't cache the
results of `Get` / `GetEACL` / `List` operations. As a consequence of this,
high load on the service caused neo-go client's connection errors. To avoid
this there is a need to use cache. Object service already uses `Get` and
`GetEACL` caches.
Implement cache of `List` results. Share already implemented cache of Object
service with the Container one. Provide new instance of read-only container
storage (defined as an interface)to morph executor's constructor on which
container service is based. Write operations remained unchanged.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation of Policer's job queue the same list of objects for
processing was selected at each iteration. This was caused by consistent
return of `engine.List` function.
Use `rand.Shuffle` function to compose pseudo-random list of all objects in
order to approximately evenly distribute objects to work.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
To encode attributes with semicolon or slash, use
backslash as escaped character.
Example:
User-Agent:NeoFS\/0.23
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Do not init caches for eACL, containers and netmap
if `disable_cache` config options is `true`, use
direct RPC calls instead.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Do not read `without_notary` config value from env.
Make morph client constructor return client without
notary support. Enabling notary support should be done
with public `EnableNotarySupport` method separately.
Notary availability is deducted with client. Further,
if notary is presented on chain its support is
enabled at the corresponding client.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Add `MkdirAllX` function that wraps `os.MkdirAll`
and adds `x` permission for user and group.
This is used to make all created dirs openable
for user and group regardless of the read config
permissions.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
When Inner Ring node starts, it should sync nearest epoch tick
event based on the block of the latest epoch. Otherwise epoch
ticking can be stopped, because ballots or notary transactions
are valid for limited period of time.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Get innerring list and committee in innerring
indexer from interfaces, not from structs.
Passing IR fetcher to indexer constructor depends
on having Notary contract in sidechain(use NeoFS
role or netmap contract).
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Add `IrFetcherWithNotary` and `IrFetcherWithoutNotary`
that can fetch IR keys with and without usage of
notary contract.
Both can be hidden behind
`InnerRingKeys() (keys.PublicKeys, error)` interface.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Add initialization of `updateInnerRing` method name
in config on startup.
Rename var `setInnerRing` => `updateInnerRing`.
Rename method `SetInnerRing` => `UpdateInnerRing`
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
We should go through every key in main chain list to merget lists
as fast as possible. Previously we drop main chain traversing as
soon as we have no more new keys to add. Instead we should try
to go for old keys in the list and add it as more as we can.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Add sorting of passed public keys in `newAlphabetList`
function before Alphabet list merge to make returned
results more expected.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
If `WITHOUT_MAINNET` environmental variable is
`true`:
- Do not read `NeoFS` and `processing`
script-hashes from envs;
- Do not init Governance processor;
- Do not init NeoFS processor.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Storage node should only reflect container Put requests to sidechain w/o any
validation. All verification steps are performed by IR.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Container can have version later than the current lib version, and it should
not be considered as invalid. But it should still have adequate version.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Create `version` package and implement `IsValid` function which checks if
version is not earlier than the genesis one.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Audit client is used to send audit results and they should be
signed by inner ring node itself on order to be saved in
smart contract.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Add `netmapCandidates` method to `netmap` client
wrapper. Method parses node storages candidates
for the next epoch.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Changes:
* replace `iotuil` elements with the ones from `os` package;
* replace `os.Filemode` with `fs.FileMode`;
* use `signal.NotifyContext` instead of `NewGracefulContext` (removed).
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make Netmap service to return single network address on `LocalNodeInfo` RPC
in order to older clients.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
