potyarkin/rclone
1
0
Fork 0
forked from TrueCloudLab/rclone
Code Pull requests Activity

Version v1.60.0

Browse source
This commit is contained in:
Nick Craig-Wood 2022-10-21 15:06:08 +01:00
parent afa61e702c
commit 01dbbff62e
34 changed files with 9667 additions and 2000 deletions
Download patch file Download diff file Expand all files Collapse all files

2
docs/content/commands/rclone.md
View file

@ -37,7 +37,7 @@ See the [global flags page](/flags/) for global options not listed here.
* [rclone about](/commands/rclone_about/) - Get quota information from the remote.
* [rclone authorize](/commands/rclone_authorize/) - Remote authorization.
* [rclone backend](/commands/rclone_backend/) - Run a backend-specific command.
* [rclone bisync](/commands/rclone_bisync/) - Perform bidirectonal synchronization between two paths.
* [rclone bisync](/commands/rclone_bisync/) - Perform bidirectional synchronization between two paths.
* [rclone cat](/commands/rclone_cat/) - Concatenates any files and sends them to stdout.
* [rclone check](/commands/rclone_check/) - Checks the files in the source and destination match.
* [rclone checksum](/commands/rclone_checksum/) - Checks the files in the source against a SUM file.

6
docs/content/commands/rclone_bisync.md
View file

@ -1,17 +1,17 @@
---
title: "rclone bisync"
description: "Perform bidirectonal synchronization between two paths."
description: "Perform bidirectional synchronization between two paths."
slug: rclone_bisync
url: /commands/rclone_bisync/
# autogenerated - DO NOT EDIT, instead edit the source code in cmd/bisync/ and as part of making a release run "make commanddocs"
---
# rclone bisync
Perform bidirectonal synchronization between two paths.
Perform bidirectional synchronization between two paths.
## Synopsis
Perform bidirectonal synchronization between two paths.
Perform bidirectional synchronization between two paths.
[Bisync](https://rclone.org/bisync/) provides a
bidirectional cloud sync solution in rclone.

2
docs/content/commands/rclone_completion_bash.md
View file

@ -28,7 +28,7 @@ To load completions for every new session, execute once:
### macOS:
rclone completion bash > /usr/local/etc/bash_completion.d/rclone
rclone completion bash > $(brew --prefix)/etc/bash_completion.d/rclone
You will need to start a new shell for this setup to take effect.

6
docs/content/commands/rclone_completion_zsh.md
View file

@ -18,6 +18,10 @@ to enable it. You can execute the following once:
echo "autoload -U compinit; compinit" >> ~/.zshrc
To load completions in your current shell session:
source <(rclone completion zsh); compdef _rclone rclone
To load completions for every new session, execute once:
### Linux:
@ -26,7 +30,7 @@ To load completions for every new session, execute once:
### macOS:
rclone completion zsh > /usr/local/share/zsh/site-functions/_rclone
rclone completion zsh > $(brew --prefix)/share/zsh/site-functions/_rclone
You will need to start a new shell for this setup to take effect.

2
docs/content/commands/rclone_config_create.md
View file

@ -45,7 +45,7 @@ are 100% certain you are already passing obscured passwords then use
`rclone config password` command.
The flag `--non-interactive` is for use by applications that wish to
configure rclone themeselves, rather than using rclone's text based
configure rclone themselves, rather than using rclone's text based
configuration questions. If this flag is set, and rclone needs to ask
the user a question, a JSON blob will be returned with the question in
it.

2
docs/content/commands/rclone_config_update.md
View file

@ -45,7 +45,7 @@ are 100% certain you are already passing obscured passwords then use
`rclone config password` command.
The flag `--non-interactive` is for use by applications that wish to
configure rclone themeselves, rather than using rclone's text based
configure rclone themselves, rather than using rclone's text based
configuration questions. If this flag is set, and rclone needs to ask
the user a question, a JSON blob will be returned with the question in
it.

2
docs/content/commands/rclone_hashsum.md
View file

@ -26,7 +26,7 @@ For the MD5 and SHA1 algorithms there are also dedicated commands,
This command can also hash data received on standard input (stdin),
by not passing a remote:path, or by passing a hyphen as remote:path
when there is data to read (if not, the hypen will be treated literaly,
when there is data to read (if not, the hyphen will be treated literally,
as a relative path).
Run without a hash to see the list of all supported hashes, e.g.

2
docs/content/commands/rclone_ls.md
View file

@ -42,7 +42,7 @@ Note that `ls` and `lsl` recurse by default - use `--max-depth 1` to stop the re
The other list commands `lsd`,`lsf`,`lsjson` do not recurse by default - use `-R` to make them recurse.
Listing a non-existent directory will produce an error except for
Listing a nonexistent directory will produce an error except for
remotes which can't have empty directories (e.g. s3, swift, or gcs -
the bucket-based remotes).

2
docs/content/commands/rclone_lsd.md
View file

@ -52,7 +52,7 @@ Note that `ls` and `lsl` recurse by default - use `--max-depth 1` to stop the re
The other list commands `lsd`,`lsf`,`lsjson` do not recurse by default - use `-R` to make them recurse.
Listing a non-existent directory will produce an error except for
Listing a nonexistent directory will produce an error except for
remotes which can't have empty directories (e.g. s3, swift, or gcs -
the bucket-based remotes).

2
docs/content/commands/rclone_lsf.md
View file

@ -126,7 +126,7 @@ Note that `ls` and `lsl` recurse by default - use `--max-depth 1` to stop the re
The other list commands `lsd`,`lsf`,`lsjson` do not recurse by default - use `-R` to make them recurse.
Listing a non-existent directory will produce an error except for
Listing a nonexistent directory will produce an error except for
remotes which can't have empty directories (e.g. s3, swift, or gcs -
the bucket-based remotes).

4
docs/content/commands/rclone_lsjson.md
View file

@ -56,7 +56,7 @@ If `--files-only` is not specified directories in addition to the files
will be returned.
If `--metadata` is set then an additional Metadata key will be returned.
This will have metdata in rclone standard format as a JSON object.
This will have metadata in rclone standard format as a JSON object.
if `--stat` is set then a single JSON blob will be returned about the
item pointed to. This will return an error if the item isn't found.
@ -102,7 +102,7 @@ Note that `ls` and `lsl` recurse by default - use `--max-depth 1` to stop the re
The other list commands `lsd`,`lsf`,`lsjson` do not recurse by default - use `-R` to make them recurse.
Listing a non-existent directory will produce an error except for
Listing a nonexistent directory will produce an error except for
remotes which can't have empty directories (e.g. s3, swift, or gcs -
the bucket-based remotes).

2
docs/content/commands/rclone_lsl.md
View file

@ -42,7 +42,7 @@ Note that `ls` and `lsl` recurse by default - use `--max-depth 1` to stop the re
The other list commands `lsd`,`lsf`,`lsjson` do not recurse by default - use `-R` to make them recurse.
Listing a non-existent directory will produce an error except for
Listing a nonexistent directory will produce an error except for
remotes which can't have empty directories (e.g. s3, swift, or gcs -
the bucket-based remotes).

2
docs/content/commands/rclone_md5sum.md
View file

@ -26,7 +26,7 @@ to running `rclone hashsum MD5 remote:path`.
This command can also hash data received on standard input (stdin),
by not passing a remote:path, or by passing a hyphen as remote:path
when there is data to read (if not, the hypen will be treated literaly,
when there is data to read (if not, the hyphen will be treated literally,
as a relative path).

15
docs/content/commands/rclone_mount.md
View file

@ -98,7 +98,7 @@ and experience unexpected program errors, freezes or other issues, consider moun
as a network drive instead.
When mounting as a fixed disk drive you can either mount to an unused drive letter,
or to a path representing a **non-existent** subdirectory of an **existing** parent
or to a path representing a **nonexistent** subdirectory of an **existing** parent
directory or drive. Using the special value `*` will tell rclone to
automatically assign the next available drive letter, starting with Z: and moving backward.
Examples:
@ -129,7 +129,7 @@ the mapped drive, shown in Windows Explorer etc, while the complete
`\\server\share` will be reported as the remote UNC path by
`net use` etc, just like a normal network drive mapping.
If you specify a full network share UNC path with `--volname`, this will implicitely
If you specify a full network share UNC path with `--volname`, this will implicitly
set the `--network-mode` option, so the following two examples have same result:
rclone mount remote:path/to/files X: --network-mode
@ -138,7 +138,7 @@ set the `--network-mode` option, so the following two examples have same result:
You may also specify the network share UNC path as the mountpoint itself. Then rclone
will automatically assign a drive letter, same as with `*` and use that as
mountpoint, and instead use the UNC path specified as the volume name, as if it were
specified with the `--volname` option. This will also implicitely set
specified with the `--volname` option. This will also implicitly set
the `--network-mode` option. This means the following two examples have same result:
rclone mount remote:path/to/files \\cloud\remote
@ -174,7 +174,7 @@ The permissions on each entry will be set according to [options](#options)
The default permissions corresponds to `--file-perms 0666 --dir-perms 0777`,
i.e. read and write permissions to everyone. This means you will not be able
to start any programs from the the mount. To be able to do that you must add
to start any programs from the mount. To be able to do that you must add
execute permissions, e.g. `--file-perms 0777 --dir-perms 0777` to add it
to everyone. If the program needs to write files, chances are you will have
to enable [VFS File Caching](#vfs-file-caching) as well (see also [limitations](#limitations)).
@ -245,8 +245,8 @@ applications won't work with their files on an rclone mount without
`--vfs-cache-mode writes` or `--vfs-cache-mode full`.
See the [VFS File Caching](#vfs-file-caching) section for more info.
The bucket-based remotes (e.g. Swift, S3, Google Compute Storage, B2,
Hubic) do not support the concept of empty directories, so empty
The bucket-based remotes (e.g. Swift, S3, Google Compute Storage, B2)
do not support the concept of empty directories, so empty
directories will have a tendency to disappear once they fall out of
the directory cache.
@ -341,6 +341,8 @@ mount sftp1:subdir /mnt/data -t rclone -o vfs_cache_mode=writes,sftp_key_file=/p
or create systemd mount units:
```
# /etc/systemd/system/mnt-data.mount
[Unit]
After=network-online.target
[Mount]
Type=rclone
What=sftp1:subdir
@ -352,6 +354,7 @@ optionally accompanied by systemd automount unit
```
# /etc/systemd/system/mnt-data.automount
[Unit]
After=network-online.target
Before=remote-fs.target
[Automount]
Where=/mnt/data

2
docs/content/commands/rclone_ncdu.md
View file

@ -45,7 +45,7 @@ press '?' to toggle the help on and off. The supported keys are:
q/ESC/^c to quit
Listed files/directories may be prefixed by a one-character flag,
some of them combined with a description in brackes at end of line.
some of them combined with a description in brackets at end of line.
These flags have the following meaning:
e means this is an empty directory, i.e. contains no files (but

7
docs/content/commands/rclone_serve_dlna.md
View file

@ -32,11 +32,6 @@ IPs.
Use `--name` to choose the friendly server name, which is by
default "rclone (hostname)".
Use `--announce-interval` to specify the interval at which SSDP server
announce devices and services. Larger active announcement intervals help
keep the multicast domain clean, this value does not affect unicast
responses to `M-SEARCH` requests from other devices.
Use `--log-trace` in conjunction with `-vv` to enable additional debug
logging of all UPNP traffic.
@ -367,11 +362,13 @@ rclone serve dlna remote:path [flags]
```
--addr string The ip:port or :port to bind the DLNA http server to (default ":7879")
--announce-interval duration The interval between SSDP announcements (default 12m0s)
--dir-cache-time duration Time to cache directory entries for (default 5m0s)
--dir-perms FileMode Directory permissions (default 0777)
--file-perms FileMode File permissions (default 0666)
--gid uint32 Override the gid field set by the filesystem (not supported on Windows) (default 1000)
-h, --help help for dlna
--interface stringArray The interface to use for SSDP (repeat as necessary)
--log-trace Enable trace logging of SOAP traffic
--name string Name of DLNA server
--no-checksum Don't compare checksums on up/download

5
docs/content/commands/rclone_serve_http.md
View file

@ -60,6 +60,10 @@ of that with the CA certificate. `--key` should be the PEM encoded
private key and `--client-ca` should be the PEM encoded client
certificate authority certificate.
--min-tls-version is minimum TLS version that is acceptable. Valid
values are "tls1.0", "tls1.1", "tls1.2" and "tls1.3" (default
"tls1.0").
### Template
`--template` allows a user to specify a custom markup template for HTTP
@ -446,6 +450,7 @@ rclone serve http remote:path [flags]
--htpasswd string A htpasswd file - if not provided no authentication is done
--key string SSL PEM Private key
--max-header-bytes int Maximum size of request header (default 4096)
--min-tls-version string Minimum TLS version that is acceptable (default "tls1.0")
--no-checksum Don't compare checksums on up/download
--no-modtime Don't read/write the modification time (can speed things up)
--no-seek Don't allow seeking in files

5
docs/content/commands/rclone_serve_restic.md
View file

@ -174,6 +174,10 @@ of that with the CA certificate. `--key` should be the PEM encoded
private key and `--client-ca` should be the PEM encoded client
certificate authority certificate.
--min-tls-version is minimum TLS version that is acceptable. Valid
values are "tls1.0", "tls1.1", "tls1.2" and "tls1.3" (default
"tls1.0").
```
rclone serve restic remote:path [flags]
@ -192,6 +196,7 @@ rclone serve restic remote:path [flags]
--htpasswd string htpasswd file - if not provided no authentication is done
--key string SSL PEM Private key
--max-header-bytes int Maximum size of request header (default 4096)
--min-tls-version string Minimum TLS version that is acceptable (default "tls1.0")
--pass string Password for authentication
--private-repos Users can only access their private repo
--realm string Realm for authentication (default "rclone")

23
docs/content/commands/rclone_serve_sftp.md
View file

@ -11,11 +11,19 @@ Serve the remote over SFTP.
## Synopsis
Run a SFTP server to serve a remote over SFTP. This can be used
with an SFTP client or you can make a remote of type sftp to use with it.
Run an SFTP server to serve a remote over SFTP. This can be used
with an SFTP client or you can make a remote of type [sftp](/sftp) to use with it.
You can use the filter flags (e.g. `--include`, `--exclude`) to control what
is served.
You can use the [filter](/filtering) flags (e.g. `--include`, `--exclude`)
to control what is served.
The server will respond to a small number of shell commands, mainly
md5sum, sha1sum and df, which enable it to provide support for checksums
and the about feature when accessed from an sftp remote.
Note that this server uses standard 32 KiB packet payload size, which
means you must not configure the client to expect anything else, e.g.
with the [chunk_size](/sftp/#sftp-chunk-size) option on an sftp remote.
The server will log errors. Use `-v` to see access logs.
@ -28,11 +36,6 @@ You must provide some means of authentication, either with
`--auth-proxy`, or set the `--no-auth` flag for no
authentication when logging in.
Note that this also implements a small number of shell commands so
that it can provide md5sum/sha1sum/df information for the rclone sftp
backend. This means that is can support SHA1SUMs, MD5SUMs and the
about command when paired with the rclone sftp backend.
If you don't supply a host `--key` then rclone will generate rsa, ecdsa
and ed25519 variants, and cache them for later use in rclone's cache
directory (see `rclone help flags cache-dir`) in the "serve-sftp"
@ -484,7 +487,7 @@ rclone serve sftp remote:path [flags]
--pass string Password for authentication
--poll-interval duration Time to wait between polling for changes, must be smaller than dir-cache-time and only on supported remotes (set 0 to disable) (default 1m0s)
--read-only Only allow read-only access
--stdio Run an sftp server on run stdin/stdout
--stdio Run an sftp server on stdin/stdout
--uid uint32 Override the uid field set by the filesystem (not supported on Windows) (default 1000)
--umask int Override the permission bits set by the filesystem (not supported on Windows) (default 2)
--user string User name for authentication

5
docs/content/commands/rclone_serve_webdav.md
View file

@ -109,6 +109,10 @@ of that with the CA certificate. `--key` should be the PEM encoded
private key and `--client-ca` should be the PEM encoded client
certificate authority certificate.
--min-tls-version is minimum TLS version that is acceptable. Valid
values are "tls1.0", "tls1.1", "tls1.2" and "tls1.3" (default
"tls1.0").
## VFS - Virtual File System
This command uses the VFS layer. This adapts the cloud storage objects
@ -531,6 +535,7 @@ rclone serve webdav remote:path [flags]
--htpasswd string htpasswd file - if not provided no authentication is done
--key string SSL PEM Private key
--max-header-bytes int Maximum size of request header (default 4096)
--min-tls-version string Minimum TLS version that is acceptable (default "tls1.0")
--no-checksum Don't compare checksums on up/download
--no-modtime Don't read/write the modification time (can speed things up)
--no-seek Don't allow seeking in files

2
docs/content/commands/rclone_sha1sum.md
View file

@ -26,7 +26,7 @@ to running `rclone hashsum SHA1 remote:path`.
This command can also hash data received on standard input (stdin),
by not passing a remote:path, or by passing a hyphen as remote:path
when there is data to read (if not, the hypen will be treated literaly,
when there is data to read (if not, the hyphen will be treated literally,
as a relative path).
This command can also hash data received on STDIN, if not passing

5
docs/content/commands/rclone_sync.md
View file

@ -37,6 +37,11 @@ extended explanation in the [copy](/commands/rclone_copy/) command if unsure.
If dest:path doesn't exist, it is created and the source:path contents
go there.
It is not possible to sync overlapping remotes. However, you may exclude
the destination from the sync with a filter rule or by putting an
exclude-if-present file inside the destination directory and sync to a
destination that is inside the source directory.
**Note**: Use the `-P`/`--progress` flag to view real-time transfer statistics
**Note**: Use the `rclone dedupe` command to deal with "Duplicate object/directory found in source/destination - ignoring" errors.