This is done by draining the connections for configured time after registry receives a SIGTERM signal.
This adds a `draintimeout` setting under `HTTP`. Registry doesn't drain
if draintimeout is not provided.
Signed-off-by: Manish Tomar <manish.tomar@docker.com>
context.App.repoRemover is single registry instance stored throughout
app run. It was wrapped in another remover when processing each request.
This remover happened to be remover got from previous request. This way
every remover created was stored in infinite linked list causing memory
leak. Fixing it by storing the wrapped remover inside the request context
which will get gced when request context is gced. This was introduced in
PR #2648.
Signed-off-by: Manish Tomar <manish.tomar@docker.com>
by having another interface RepositoryRemover that is implemented by
registry instance and is injected in app context for event tracking
Signed-off-by: Manish Tomar <manish.tomar@docker.com>
OCI Image manifests and indexes are supported both with and without
an embeded MediaType (the field is reserved according to the spec).
Test storing and retrieving both types from the manifest store.
Signed-off-by: Owen W. Taylor <otaylor@fishsoup.net>
In the OCI image specification, the MediaType field is reserved
and otherwise undefined; assume that manifests without a media
in storage are OCI images or image indexes, and determine which
by looking at what fields are in the JSON. We do keep a check
that when unmarshalling an OCI image or image index, if it has
a MediaType field, it must match that media type of the upload.
Signed-off-by: Owen W. Taylor <otaylor@fishsoup.net>
According golang documentation [1]: no goroutine should expect to be
able to acquire a read lock until the initial read lock is released.
[1] https://golang.org/pkg/sync/#RWMutex
Signed-off-by: Gladkov Alexey <agladkov@redhat.com>
at the first iteration, only the following metrics are collected:
- HTTP metrics of each API endpoint
- cache counter for request/hit/miss
- histogram of storage actions, including:
GetContent, PutContent, Stat, List, Move, and Delete
Signed-off-by: tifayuki <tifayuki@gmail.com>
This adds a configuration setting `HTTP.TLS.LetsEncrypt.Hosts` which can
be set to a list of hosts that the registry will whitelist for retrieving
certificates from Let's Encrypt. HTTPS connections with SNI hostnames
that are not whitelisted will be closed with an "unknown host" error.
It is required to avoid lots of unsuccessful registrations attempts that
are triggered by malicious clients connecting with bogus SNI hostnames.
NOTE: Due to a bug in the deprecated vendored rsc.io/letsencrypt library
clearing the host list requires deleting or editing of the cachefile to
reset the hosts list to null.
Signed-off-by: Felix Buenemann <felix.buenemann@gmail.com>
This removes the old global walk function, and changes all
the code to use the per-driver walk functions.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
This changes the Walk Method used for catalog enumeration. Just to show
how much an effect this has on our s3 storage:
Original:
List calls: 6839
real 3m16.636s
user 0m0.000s
sys 0m0.016s
New:
ListObjectsV2 Calls: 1805
real 0m49.970s
user 0m0.008s
sys 0m0.000s
This is because it no longer performs a list and stat per item, and instead
is able to use the metadata gained from the list as a replacement to stat.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Move the Walk types into registry/storage/driver, and add a Walk method to each
storage driver. Although this is yet another API to implement, there is a fall
back implementation that relies on List and Stat. For some filesystems this is
very slow.
Also, this WalkDir Method conforms better do a traditional WalkDir (a la filepath).
This change is in preparation for refactoring.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
If tenant or tenantid are passed as env variables, we systematically use Sprint to make sure they are string and not integer as it would make mapstructure fail.
Signed-off-by: Raphaël Enrici <raphael@root-42.com>
The previous code assumed that the link returned when listing tags was
always absolute. However, some registries, such as quay.io, return the
link as a relative link (e.g. the second page for the quay.io/coreos/etcd
image is /v2/coreos/etcd/tags/list?next_page=<truncated>&n=50). Because
the relative link was retrieved directly, the fetch failed (with the
error `unsupported protocol scheme ""`).
Signed-off-by: Kevin Lin <kevin@kelda.io>
If htpasswd authentication option is configured but the htpasswd file is
missing, populate it with a default user and automatically generated
password.
The password will be printed to stdout.
Signed-off-by: Liron Levin <liron@twistlock.com>
The current registry/client sends the registered manifest types in
random order. Allow clients to request a single specific manifest type
or a preferred order as per the HTTP spec.
Signed-off-by: Clayton Coleman <ccoleman@redhat.com>
A statically hosted registry that responds correctly to GET with a
manifest will load the right digest (by looking at the manifest body and
calculating the digest). If the registry returns a HEAD without
`Docker-Content-Digest`, then the client Tags().Get() call will return
an empty digest.
This commit changes the client to fallback to loading the tag via GET if
the `Docker-Content-Digest` header is not set.
Signed-off-by: Clayton Coleman <ccoleman@redhat.com>
AuthorizeRequest() injects the 'pull' scope if `from` is set
unconditionally. If the current token already has that scope, it will
be inserted into the scope list twice and `addedScopes` will be set to
true, resulting in a new token being fetched that has no net new scopes.
Instead, check whether `additionalScopes` are actually new.
Signed-off-by: Clayton Coleman <ccoleman@redhat.com>
To simplify the vendoring story for the client, we have now removed the
requirement for `logrus` and the forked `context` package (usually
imported as `dcontext`). We inject the logger via the metrics tracker
for the blob cache and via options on the token handler. We preserve
logs on the proxy cache for that case. Clients expecting these log
messages may need to be updated accordingly.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Back in the before time, the best practices surrounding usage of Context
weren't quite worked out. We defined our own type to make usage easier.
As this packaged was used elsewhere, it make it more and more
challenging to integrate with the forked `Context` type. Now that it is
available in the standard library, we can just use that one directly.
To make usage more consistent, we now use `dcontext` when referring to
the distribution context package.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Under certain circumstances, the use of `StorageDriver.GetContent` can
result in unbounded memory allocations. In particualr, this happens when
accessing a layer through the manifests endpoint.
This problem is mitigated by setting a 4MB limit when using to access
content that may have been accepted from a user. In practice, this means
setting the limit with the use of `BlobProvider.Get` by wrapping
`StorageDriver.GetContent` in a helper that uses `StorageDriver.Reader`
with a `limitReader` that returns an error.
When mitigating this security issue, we also noticed that the size of
manifests uploaded to the registry is also unlimited. We apply similar
logic to the request body of payloads that are full buffered.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
If the client doesn't support manifest lists, the registry will
rewrite a manifest list into the old format. The Docker-Content-Digest
header should be updated in this case.
Signed-off-by: Oleg Bulatov <oleg@bulatov.me>
In some conditions, regulator.exit may not send a signal to blocked
regulator.enter.
Let's assume we are in the critical section of regulator.exit and r.available
is equal to 0. And there are three more gorotines. One goroutine also executes
regulator.exit and waits for the lock. Rest run regulator.enter and wait for
the signal.
We send the signal, and after releasing the lock, there will be lock
contention:
1. Wait from regulator.enter
2. Lock from regulator.exit
If the winner is Lock from regulator.exit, we will not send another signal to
unlock the second Wait.
Signed-off-by: Oleg Bulatov <obulatov@redhat.com>
Partially reverts change adding support for X-Forwarded-Port.
Changes the logic to prefer the standard Forwarded header over
X-Forwarded headers. Prefer forwarded "host" over "for" since
"for" represents the client and not the client's request.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Since there's no default case, if there's not a tag or digest you get
back a confusing error from the router about it not matching the
expected pattern.
Also redoing the tests for URLs a bit so that they can handle checking
for failures.
Signed-off-by: Christy Perez <christy@linux.vnet.ibm.com>
A previous inspection of the code surrounding zero-length blobs led to
some interesting question. After inspection, it was found that the hash
was indeed for the empty string (""), and not an empty tar, so the code
was correct. The variable naming and comments have been updated
accordingly.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
The registry uses partial Named values which the named parsers
no longer support. To allow the registry service to continue
to operate without canonicalization, switch to use WithName.
In the future, the registry should start using fully canonical
values on the backend and WithName should no longer support
creating partial values.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
When get manifest, the handler will try to retrieve it from storage driver. When storage driver is cloud storage, it can fail due to various reasons even if the manifest exists
(like 500, 503, etc. from storage server). Currently manifest handler blindly return 404 which can be confusing to user.
This change will return 404 if the manifest blob doesn't exist, and return 500 UnknownError for all other errors (consistent with the behavior of other handlers).
Signed-off-by: Yu Wang (UC) <yuwa@microsoft.com>
Once upon a time, we referred to manifests and images interchangably.
That simple past is no more. As we grow, we update our nomenclature and
so follows our code.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
With token authentication, requiring the "*" action for DELETE requests
makes it impossible to administratively lock a repository against pushes
and pulls but still allow deletion. This change adds a new "delete"
action for DELETE requests to make that possible.
Signed-off-by: Noah Treuhaft <noah.treuhaft@docker.com>
`app.driver.List` on `"/"` is very expensive if registry contains significant amount of images. And the result isn't used anyways.
In most (if not all) storage drivers, `Stat` has a cheaper implementation, so use it instead to achieve the same goal.
Signed-off-by: yixi zhang <yixi@memsql.com>
Modify manifest builder so it can be used to build
manifests with different configuration media types.
Rename config media type const to image config.
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
Enforces backwards compatibility with older authorization servers
without requiring the client to know about the compatibility
requirements.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
See #2077 for background.
The PR #1438 which was not reviewed by azure folks basically introduced
a race condition around uploads to the same blob by multiple clients
concurrently as it used the "writer" type for PutContent(), introduced in #1438.
This does chunked upload of blobs using "AppendBlob" type, which was not atomic.
Usage of "writer" type and thus AppendBlobs on metadata files is currently not
concurrency-safe and generally, they are not the right type of blob for the job.
This patch fixes PutContent() to use the atomic upload operation that works
for uploads smaller than 64 MB and creates blobs with "BlockBlob" type. To be
backwards compatible, we query the type of the blob first and if it is not
a "BlockBlob" we delete the blob first before doing an atomic PUT. This
creates a small inconsistency/race window "only once". Once the blob is made
"BlockBlob", it is overwritten with a single PUT atomicallly next time.
Therefore, going forward, PutContent() will be producing BlockBlobs and it
will silently migrate the AppendBlobs introduced in #1438 to BlockBlobs with
this patch.
Tested with existing code side by side, both registries with and without this
patch work fine without breaking each other. So this should be good from a
backwards/forward compatiblity perspective, with a cost of doing an extra
HEAD checking the blob type.
Fixes#2077.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
Use whitelist of allowed repository classes to enforce.
By default all repository classes are allowed.
Add authorized resources to context after authorization.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Golint now checks for new lines at the end of go error strings,
remove these unneeded new lines.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Allow clients to handle errors being set in the WWW-Authenticate
rather than in the body. The WWW-Authenticate errors give a
more precise error describing what is needed to authorize
with the server.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Split challenges into its own package. Avoids possible
import cycle with challenges from client.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Updating to a recent version of Azure Storage SDK to be
able to patch some memory leaks through configurable HTTP client
changes which were made possible by recent patches to it.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
The current code determines the header order for the
"string-to-sign" payload by sorting on the concatenation
of headers and values, whereas it should only happen on the
key.
During multipart uploads, since `x-amz-copy-source-range` and
`x-amz-copy-source` headers are present, V2 signatures fail to
validate since header order is swapped.
This patch reverts to the expected behavior.
Signed-off-by: Pierre-Yves Ritschard <pyr@spootnik.org>
Prefer non-standard headers like X-Forwarded-Proto, X-Forwarded-Host and
X-Forwarded-Port over the standard Forwarded header to maintain
backwards compatibility.
If a port is not specified neither in Host nor in forwarded headers but
it is specified just with X-Forwarded-Port, use its value in base urls
for redirects.
Forwarded header is defined in rfc7239.
X-Forwarded-Port is a non-standard header. Here's a description copied
from "HTTP Headers and Elastic Load Balancing" of AWS ELB docs:
> The X-Forwarded-Port request header helps you identify the port that
> an HTTP or HTTPS load balancer uses to connect to the client.
Signed-off-by: Michal Minář <miminar@redhat.com>
Driver was passing connections by copying. Storing
`swift.Connection` as pointer to fix the warnings.
Ref: #2030.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
