v2 ping now checks for a Docker-Distribution-API-Version
header that identifies the endpoint as "registry/2.0"
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Fixes#10129
Makes the .dockercfg more human parsable.
Also cleaned up the (technically) racey login test.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Token cache prevents the need to get a new token for every registry interaction.
Since the tokens are short lived, the cache expires after only a minute.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
While the v2 pull operation is writing the body of the layer blob to disk
it now computes the tarsum checksum of the archive before extracting it to
the backend storage driver. If the checksum does not match that from the
image manifest an error is raised.
Also adds more debug logging to the pull operation and fixes existing test
cases which were failing. Adds a reverse lookup constructor to the tarsum
package so that you can get a tarsum object using a checksum label.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Because docker core cannot vendor non-master Go dependencies, we need to remove
dependencies on registry package. The definition of digest.Digest has been
changed to a string and the regular expressions have been ported from
docker-registry/common library.
We'll likely change this be dependent on the registry in the future when the
API stabilizies and use of the master branch becomes the norm.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This package, ported from next-generation docker regsitry, includes route and
error definitions. These facilitate compliant V2 client implementation. The
portions of the HTTP API that are included in this package are considered to be
locked down and should only be changed through a careful change proposal.
Descriptor definitions package layout may change without affecting API behavior
until the exported Go API is ready to be locked down.
When the new registry stabilizes and becomes the master branch, this package
can be vendored from the registry.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Registry authorization token is now taken from the response body rather than
the repsonse header.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
summary of changes:
registry/auth.go
- More logging around the login functions
- split Login() out to handle different code paths for v1 (unchanged logic)
and v2 (does not currently do account creation)
- handling for either basic or token based login attempts
registry/authchallenge.go
- New File
- credit to Brian Bland <brian.bland@docker.com> (github: BrianBland)
- handles parsing of WWW-Authenticate response headers
registry/endpoint.go
- EVEN MOAR LOGGING
- Many edits throught to make the coad less dense. Sparse code is more
readable code.
- slit Ping() out to handle different code paths for v1 (unchanged logic)
and v2.
- Updated Endpoint struct type to include an entry for authorization
challenges discovered during ping of a v2 registry.
- If registry endpoint version is unknown, v2 code path is first attempted,
then fallback to v1 upon failure.
registry/service.go
- STILL MOAR LOGGING
- simplified the logic around starting the 'auth' job.
registry/session.go
- updated use of a registry.Endpoint struct field.
registry/token.go
- New File
- Handles getting token from the parameters of a token auth challenge.
- Modified from function written by Brian Bland (see above credit).
registry/types.go
- Removed 'DefaultAPIVersion' in lieu of 'APIVersionUnknown = 0'`
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Passing RepositoryInfo to ResolveAuthConfig, pullRepository, and pushRepository
Moving --registry-mirror configuration to registry config
Created resolve_repository job
Repo names with 'index.docker.io' or 'docker.io' are now synonymous with omitting an index name.
Adding test for RepositoryInfo
Adding tests for opts.StringSetOpts and registry.ValidateMirror
Fixing search term use of repoInfo
Adding integration tests for registry mirror configuration
Normalizing LookupImage image name to match LocalName parsing rules
Normalizing repository LocalName to avoid multiple references to an official image
Removing errorOut use in tests
Removing TODO comment
gofmt changes
golint comments cleanup. renaming RegistryOptions => registry.Options, and RegistryServiceConfig => registry.ServiceConfig
Splitting out builtins.Registry and registry.NewService calls
Stray whitespace cleanup
Moving integration tests for Mirrors and InsecureRegistries into TestNewIndexInfo unit test
Factoring out ValidateRepositoryName from NewRepositoryInfo
Removing unused IndexServerURL
Allowing json marshaling of ServiceConfig. Exposing ServiceConfig in /info
Switching to CamelCase for json marshaling
PR cleanup; removing 'Is' prefix from boolean members. Removing unneeded json tags.
Removing non-cleanup related fix for 'localhost:[port]' in splitReposName
Merge fixes for gh9735
Fixing integration test
Reapplying #9754
Adding comment on config.IndexConfigs use from isSecureIndex
Remove unused error return value from isSecureIndex
Signed-off-by: Don Kjer <don.kjer@gmail.com>
Adding back comment in isSecureIndex
Signed-off-by: Don Kjer <don.kjer@gmail.com>
If `--insecure-registry mydomain.com` was specified, it would match a registry at mydomain.com on any port.
This was accidentally added in #9735 and is now being reverted.
Signed-off-by: Tibor Vass <teabee89@gmail.com>
This commit is patch for following comment
// TODO: This method should return the errors instead of masking them and returning false
Signed-off-by: Daehyeok Mun <daehyeok@gmail.com>
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Incase of a 3xx redirect the var was being overshowed and ever changed
causing an infinite loop.
Fixes#9480
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
This ensures that ServerAddress is set, while previously it was getting
set after configFile.Configs.
Signed-off-by: Vaidas Jablonskis <jablonskis@gmail.com>
Fix issue with restoring the tag store and setting static configuration
from the daemon. i.e. the field on the TagStore struct must be made
internal or the json.Unmarshal in restore will overwrite the insecure
registries to be an empty struct.
Signed-off-by: Michael Crosby <michael@docker.com>
Conflicts:
graph/pull.go
graph/push.go
graph/tags.go
We do this to prevent leakage of information, we don't want people
to be able to probe for existing content.
According to RFC 2616, "This status code (404) is commonly used when the server does not
wish to reveal exactly why the request has been refused, or when no other response i
is applicable."
https://www.ietf.org/rfc/rfc2616.txt
10.4.4 403 Forbidden
The server understood the request, but is refusing to fulfill it.
Authorization will not help and the request SHOULD NOT be repeated.
If the request method was not HEAD and the server wishes to make
public why the request has not been fulfilled, it SHOULD describe the
reason for the refusal in the entity. If the server does not wish to
make this information available to the client, the status code 404
(Not Found) can be used instead.
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No
indication is given of whether the condition is temporary or
permanent. The 410 (Gone) status code SHOULD be used if the server
knows, through some internally configurable mechanism, that an old
resource is permanently unavailable and has no forwarding address.
This status code is commonly used when the server does not wish to
reveal exactly why the request has been refused, or when no other
response is applicable.
When docker is running through its certificates, it should continue
trying with a new certificate even if it gets back a 404 error code.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
Add support for pulling signed images from a version 2 registry.
Only official images within the library namespace will be pull from the
new registry and check the build signature.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
This introduces Versions for TarSum checksums.
Fixes: https://github.com/docker/docker/issues/7526
It preserves current functionality and abstracts the interface for
future flexibility of hashing algorithms. As a POC, the VersionDev
Tarsum does not include the mtime in the checksum calculation, and would
solve https://github.com/docker/docker/issues/7387 though this is not a
settled Version is subject to change until a version number is assigned.
Signed-off-by: Vincent Batts <vbatts@redhat.com>
Per registry.doRequest, res and client might be nil in case of error
For example, dns resolution errors, /etc/docker/certs.d perms, failed
loading of x509 cert ...
This will make res.StatusCode and res.Body SEGFAULT.
Signed-off-by: Arthur Gautier <baloo@gandi.net>
To avoid conflicting with layer IDs, repository names must
not be tagged with names that collide with hexadecimal strings.
Signed-off-by: Eric Windisch <eric@windisch.us>
The cli interface works similar to other registry related commands:
docker search foo
... searches for foo on the official hub
docker search localhost:5000/foo
... does the same for the private reg at localhost:5000
Signed-off-by: Daniel Menet <membership@sontags.ch>
renaming this struct to more clearly be session, as that is what it
handles.
Splitting out files for easier readability.
Signed-off-by: Vincent Batts <vbatts@redhat.com>
functions to pkg/parsers/kernel, and parsing filters to
pkg/parsers/filter. Adjust imports and package references.
Docker-DCO-1.1-Signed-off-by: Erik Hollensbe <github@hollensbe.org> (github: erikh)
This lets you specify custom client TLS certificates and CA root for a
specific registry hostname. Docker will then verify the registry
against the CA and present the client cert when talking to that
registry. This allows the registry to verify that the client has a
proper key, indicating that the client is allowed to access the
images.
A custom cert is configured by creating a directory in
/etc/docker/certs.d with the same name as the registry hostname. Inside
this directory all *.crt files are added as CA Roots (if none exists,
the system default is used) and pair of files <filename>.key and
<filename>.cert indicate a custom certificate to present to the registry.
If there are multiple certificates each one will be tried in
alphabetical order, proceeding to the next if we get a 403 of 5xx
response.
So, an example setup would be:
/etc/docker/certs.d/
└── localhost
├── client.cert
├── client.key
└── localhost.crt
A simple way to test this setup is to use an apache server to host a
registry. Just copy a registry tree into the apache root, here is an
example one containing the busybox image:
http://people.gnome.org/~alexl/v1.tar.gz
Then add this conf file as /etc/httpd/conf.d/registry.conf:
# This must be in the root context, otherwise it causes a re-negotiation
# which is not supported by the tls implementation in go
SSLVerifyClient optional_no_ca
<Location /v1>
Action cert-protected /cgi-bin/cert.cgi
SetHandler cert-protected
Header set x-docker-registry-version "0.6.2"
SetEnvIf Host (.*) custom_host=$1
Header set X-Docker-Endpoints "%{custom_host}e"
</Location>
And this as /var/www/cgi-bin/cert.cgi
#!/bin/bash
if [ "$HTTPS" != "on" ]; then
echo "Status: 403 Not using SSL"
echo "x-docker-registry-version: 0.6.2"
echo
exit 0
fi
if [ "$SSL_CLIENT_VERIFY" == "NONE" ]; then
echo "Status: 403 Client certificate invalid"
echo "x-docker-registry-version: 0.6.2"
echo
exit 0
fi
echo "Content-length: $(stat --printf='%s' $PATH_TRANSLATED)"
echo "x-docker-registry-version: 0.6.2"
echo "X-Docker-Endpoints: $SERVER_NAME"
echo "X-Docker-Size: 0"
echo
cat $PATH_TRANSLATED
This will return 403 for all accessed to /v1 unless *any* client cert
is presented. Obviously a real implementation would verify more details
about the certificate.
Example client certs can be generated with:
openssl genrsa -out client.key 1024
openssl req -new -x509 -text -key client.key -out client.cert
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
These constants don't need to use time.Duration(). Fixup this file since
it seems to be the only one using this style.
Docker-DCO-1.1-Signed-off-by: Brandon Philips <brandon.philips@coreos.com> (github: philips)
