[#56] object: Introduce Patch method

* Introduce rpc `Patch` and corresponding types;
* Generate docs.

Signed-off-by: Airat Arifullin <aarifullin@yadro.com>
This commit is contained in:
Airat Arifullin 2024-07-23 14:12:49 +03:00 committed by Evgenii Stratonikov
parent 8dd63c451c
commit 2efdc8fedb
2 changed files with 232 additions and 1 deletions

View file

@ -283,6 +283,51 @@ service ObjectService {
// - **TOKEN_EXPIRED** (4097, SECTION_SESSION): \ // - **TOKEN_EXPIRED** (4097, SECTION_SESSION): \
// provided session token has expired. // provided session token has expired.
rpc PutSingle(PutSingleRequest) returns (PutSingleResponse); rpc PutSingle(PutSingleRequest) returns (PutSingleResponse);
// Patch the object. Request uses gRPC stream. First message must set
// the address of the object that is going to get patched. If the object's attributes
// are patched, then these attrubutes must be set only within the first stream message.
//
// If the patch request is performed by NOT the object's owner but if the actor has the permission
// to perform the patch, then `OwnerID` of the object is changed. In this case the object's owner
// loses the object's ownership after the patch request is successfully done.
//
// As objects are content-addressable the patching causes new object ID generation for the patched object.
// This object id is set witihn `PatchResponse`. But the object id may remain unchanged in such cases:
// 1. The chunk of the applying patch contains the same value as the object's payload within the same range;
// 2. The patch that reverts the changes applied by preceding patch;
// 3. The application of the same patches for the object a few times.
//
// Extended headers can change `Patch` behaviour:
// * [ __SYSTEM__NETMAP_EPOCH \
// (`__NEOFS__NETMAP_EPOCH` is deprecated) \
// Will use the requsted version of Network Map for object placement
// calculation.
//
// Please refer to detailed `XHeader` description.
//
// Statuses:
// - **OK** (0, SECTION_SUCCESS): \
// object has been successfully patched and saved in the container;
// - Common failures (SECTION_FAILURE_COMMON);
// - **ACCESS_DENIED** (2048, SECTION_OBJECT): \
// write access to the container is denied;
// - **OBJECT_NOT_FOUND** (2049, SECTION_OBJECT): \
// object not found in container;
// - **OBJECT_ALREADY_REMOVED** (2052, SECTION_OBJECT): \
// the requested object has been marked as deleted.
// - **OUT_OF_RANGE** (2053, SECTION_OBJECT): \
// the requested range is out of bounds;
// - **CONTAINER_NOT_FOUND** (3072, SECTION_CONTAINER): \
// object storage container not found;
// - **CONTAINER_ACCESS_DENIED** (3074, SECTION_CONTAINER): \
// access to container is denied;
// - **TOKEN_NOT_FOUND** (4096, SECTION_SESSION): \
// (for trusted object preparation) session private key does not exist or
// has been deleted;
// - **TOKEN_EXPIRED** (4097, SECTION_SESSION): \
// provided session token has expired.
rpc Patch(stream PatchRequest) returns (PatchResponse);
} }
// GET object request // GET object request
@ -816,4 +861,70 @@ message PutSingleResponse {
// authenticate the nodes of the message route and check the correctness of // authenticate the nodes of the message route and check the correctness of
// transmission. // transmission.
neo.fs.v2.session.ResponseVerificationHeader verify_header = 3; neo.fs.v2.session.ResponseVerificationHeader verify_header = 3;
} }
// Object PATCH request
message PatchRequest {
// PATCH request body
message Body {
// The address of the object that is requested to get patched.
neo.fs.v2.refs.Address address = 1;
// New attributes for the object. See `replace_attributes` flag usage to define how
// new attributes should be set.
repeated neo.fs.v2.object.Header.Attribute new_attributes = 2;
// If this flag is set, then the object's attributes will be entirely replaced by `new_attributes` list.
// The empty `new_attributes` list with `replace_attributes = true` just resets attributes list for the object.
//
// Default `false` value for this flag means the attributes will be just merged. If the incoming `new_attributes`
// list contains already existing key, then it just replaces it while merging the lists.
bool replace_attributes = 3;
// The patch for the object's payload.
message Patch {
// The range of the source object for which the payload is replaced by the patch's chunk.
// If the range's `length = 0`, then the patch's chunk is just appended to the original payload
// starting from the `offest` without any replace.
Range source_range = 1;
// The chunk that is being appended to or that replaces the original payload on the given range.
bytes chunk = 2;
}
// The patch that is applied for the object.
Patch patch = 4;
}
// Body for patch request message.
Body body = 1;
// Carries request meta information. Header data is used only to regulate
// message transport and does not affect request execution.
neo.fs.v2.session.RequestMetaHeader meta_header = 2;
// Carries request verification information. This header is used to
// authenticate the nodes of the message route and check the correctness of
// transmission.
neo.fs.v2.session.RequestVerificationHeader verify_header = 3;
}
// Object PATCH response
message PatchResponse {
// PATCH response body
message Body {
// The object ID of the saved patched object.
neo.fs.v2.refs.ObjectID object_id = 1;
}
// Body for patch response message.
Body body = 1;
// Carries response meta information. Header data is used only to regulate
// message transport and does not affect request execution.
neo.fs.v2.session.ResponseMetaHeader meta_header = 2;
// Carries response verification information. This header is used to authenticate
// the nodes of the message route and check the correctness of transmission.
neo.fs.v2.session.ResponseVerificationHeader verify_header = 3;
}

View file

@ -30,6 +30,11 @@
- [HeadResponse](#neo.fs.v2.object.HeadResponse) - [HeadResponse](#neo.fs.v2.object.HeadResponse)
- [HeadResponse.Body](#neo.fs.v2.object.HeadResponse.Body) - [HeadResponse.Body](#neo.fs.v2.object.HeadResponse.Body)
- [HeaderWithSignature](#neo.fs.v2.object.HeaderWithSignature) - [HeaderWithSignature](#neo.fs.v2.object.HeaderWithSignature)
- [PatchRequest](#neo.fs.v2.object.PatchRequest)
- [PatchRequest.Body](#neo.fs.v2.object.PatchRequest.Body)
- [PatchRequest.Body.Patch](#neo.fs.v2.object.PatchRequest.Body.Patch)
- [PatchResponse](#neo.fs.v2.object.PatchResponse)
- [PatchResponse.Body](#neo.fs.v2.object.PatchResponse.Body)
- [PutRequest](#neo.fs.v2.object.PutRequest) - [PutRequest](#neo.fs.v2.object.PutRequest)
- [PutRequest.Body](#neo.fs.v2.object.PutRequest.Body) - [PutRequest.Body](#neo.fs.v2.object.PutRequest.Body)
- [PutRequest.Body.Init](#neo.fs.v2.object.PutRequest.Body.Init) - [PutRequest.Body.Init](#neo.fs.v2.object.PutRequest.Body.Init)
@ -88,6 +93,7 @@ rpc Search(SearchRequest) returns (stream SearchResponse);
rpc GetRange(GetRangeRequest) returns (stream GetRangeResponse); rpc GetRange(GetRangeRequest) returns (stream GetRangeResponse);
rpc GetRangeHash(GetRangeHashRequest) returns (GetRangeHashResponse); rpc GetRangeHash(GetRangeHashRequest) returns (GetRangeHashResponse);
rpc PutSingle(PutSingleRequest) returns (PutSingleResponse); rpc PutSingle(PutSingleRequest) returns (PutSingleResponse);
rpc Patch(stream PatchRequest) returns (PatchResponse);
``` ```
@ -395,6 +401,55 @@ been deleted;
| Name | Input | Output | | Name | Input | Output |
| ---- | ----- | ------ | | ---- | ----- | ------ |
| PutSingle | [PutSingleRequest](#neo.fs.v2.object.PutSingleRequest) | [PutSingleResponse](#neo.fs.v2.object.PutSingleResponse) | | PutSingle | [PutSingleRequest](#neo.fs.v2.object.PutSingleRequest) | [PutSingleResponse](#neo.fs.v2.object.PutSingleResponse) |
#### Method Patch
Patch the object. Request uses gRPC stream. First message must set
the address of the object that is going to get patched. If the object's attributes
are patched, then these attrubutes must be set only within the first stream message.
If the patch request is performed by NOT the object's owner but if the actor has the permission
to perform the patch, then `OwnerID` of the object is changed. In this case the object's owner
loses the object's ownership after the patch request is successfully done.
As objects are content-addressable the patching causes new object ID generation for the patched object.
This object id is set witihn `PatchResponse`. But the object id may remain unchanged in such cases:
1. The chunk of the applying patch contains the same value as the object's payload within the same range;
2. The patch that reverts the changes applied by preceding patch;
3. The application of the same patches for the object a few times.
Extended headers can change `Patch` behaviour:
* [ __SYSTEM__NETMAP_EPOCH \
(`__NEOFS__NETMAP_EPOCH` is deprecated) \
Will use the requsted version of Network Map for object placement
calculation.
Please refer to detailed `XHeader` description.
Statuses:
- **OK** (0, SECTION_SUCCESS): \
object has been successfully patched and saved in the container;
- Common failures (SECTION_FAILURE_COMMON);
- **ACCESS_DENIED** (2048, SECTION_OBJECT): \
write access to the container is denied;
- **OBJECT_NOT_FOUND** (2049, SECTION_OBJECT): \
object not found in container;
- **OBJECT_ALREADY_REMOVED** (2052, SECTION_OBJECT): \
the requested object has been marked as deleted.
- **OUT_OF_RANGE** (2053, SECTION_OBJECT): \
the requested range is out of bounds;
- **CONTAINER_NOT_FOUND** (3072, SECTION_CONTAINER): \
object storage container not found;
- **CONTAINER_ACCESS_DENIED** (3074, SECTION_CONTAINER): \
access to container is denied;
- **TOKEN_NOT_FOUND** (4096, SECTION_SESSION): \
(for trusted object preparation) session private key does not exist or
has been deleted;
- **TOKEN_EXPIRED** (4097, SECTION_SESSION): \
provided session token has expired.
| Name | Input | Output |
| ---- | ----- | ------ |
| Patch | [PatchRequest](#neo.fs.v2.object.PatchRequest) | [PatchResponse](#neo.fs.v2.object.PatchResponse) |
<!-- end services --> <!-- end services -->
@ -691,6 +746,71 @@ following steps:
| signature | [neo.fs.v2.refs.Signature](#neo.fs.v2.refs.Signature) | | Signed `ObjectID` to verify full header's authenticity | | signature | [neo.fs.v2.refs.Signature](#neo.fs.v2.refs.Signature) | | Signed `ObjectID` to verify full header's authenticity |
<a name="neo.fs.v2.object.PatchRequest"></a>
### Message PatchRequest
Object PATCH request
| Field | Type | Label | Description |
| ----- | ---- | ----- | ----------- |
| body | [PatchRequest.Body](#neo.fs.v2.object.PatchRequest.Body) | | Body for patch request message. |
| meta_header | [neo.fs.v2.session.RequestMetaHeader](#neo.fs.v2.session.RequestMetaHeader) | | Carries request meta information. Header data is used only to regulate message transport and does not affect request execution. |
| verify_header | [neo.fs.v2.session.RequestVerificationHeader](#neo.fs.v2.session.RequestVerificationHeader) | | Carries request verification information. This header is used to authenticate the nodes of the message route and check the correctness of transmission. |
<a name="neo.fs.v2.object.PatchRequest.Body"></a>
### Message PatchRequest.Body
PATCH request body
| Field | Type | Label | Description |
| ----- | ---- | ----- | ----------- |
| address | [neo.fs.v2.refs.Address](#neo.fs.v2.refs.Address) | | The address of the object that is requested to get patched. |
| new_attributes | [Header.Attribute](#neo.fs.v2.object.Header.Attribute) | repeated | New attributes for the object. See `replace_attributes` flag usage to define how new attributes should be set. |
| replace_attributes | [bool](#bool) | | If this flag is set, then the object's attributes will be entirely replaced by `new_attributes` list. The empty `new_attributes` list with `replace_attributes = true` just resets attributes list for the object.
Default `false` value for this flag means the attributes will be just merged. If the incoming `new_attributes` list contains already existing key, then it just replaces it while merging the lists. |
| patch | [PatchRequest.Body.Patch](#neo.fs.v2.object.PatchRequest.Body.Patch) | | The patch that is applied for the object. |
<a name="neo.fs.v2.object.PatchRequest.Body.Patch"></a>
### Message PatchRequest.Body.Patch
The patch for the object's payload.
| Field | Type | Label | Description |
| ----- | ---- | ----- | ----------- |
| source_range | [Range](#neo.fs.v2.object.Range) | | The range of the source object for which the payload is replaced by the patch's chunk. If the range's `length = 0`, then the patch's chunk is just appended to the original payload starting from the `offest` without any replace. |
| chunk | [bytes](#bytes) | | The chunk that is being appended to or that replaces the original payload on the given range. |
<a name="neo.fs.v2.object.PatchResponse"></a>
### Message PatchResponse
Object PATCH response
| Field | Type | Label | Description |
| ----- | ---- | ----- | ----------- |
| body | [PatchResponse.Body](#neo.fs.v2.object.PatchResponse.Body) | | Body for patch response message. |
| meta_header | [neo.fs.v2.session.ResponseMetaHeader](#neo.fs.v2.session.ResponseMetaHeader) | | Carries response meta information. Header data is used only to regulate message transport and does not affect request execution. |
| verify_header | [neo.fs.v2.session.ResponseVerificationHeader](#neo.fs.v2.session.ResponseVerificationHeader) | | Carries response verification information. This header is used to authenticate the nodes of the message route and check the correctness of transmission. |
<a name="neo.fs.v2.object.PatchResponse.Body"></a>
### Message PatchResponse.Body
PATCH response body
| Field | Type | Label | Description |
| ----- | ---- | ----- | ----------- |
| object_id | [neo.fs.v2.refs.ObjectID](#neo.fs.v2.refs.ObjectID) | | The object ID of the saved patched object. |
<a name="neo.fs.v2.object.PutRequest"></a> <a name="neo.fs.v2.object.PutRequest"></a>
### Message PutRequest ### Message PutRequest