frostfs-http-gw/README.md

<p align="center">
<img src="./.github/logo.svg" width="500px" alt="NeoFS">
</p>
<p align="center">
  <a href="https://fs.neo.org">NeoFS</a> is a decentralized distributed object storage integrated with the <a href="https://neo.org">NEO Blockchain</a>.
</p>

---
[![Report](https://goreportcard.com/badge/github.com/nspcc-dev/neofs-http-gw)](https://goreportcard.com/report/github.com/nspcc-dev/neofs-http-gw)
![GitHub release (latest SemVer)](https://img.shields.io/github/v/release/nspcc-dev/neofs-http-gw?sort=semver)
![License](https://img.shields.io/github/license/nspcc-dev/neofs-http-gw.svg?style=popout)

# NeoFS HTTP Protocol Gateway

NeoFS HTTP Protocol Gateway bridges NeoFS internal protocol and HTTP standard.
- you can download one file per request from NeoFS Network
- you can upload one file per request into the NeoFS Network

## Installation

```go get -u github.com/nspcc-dev/neofs-http-gw```

Or you can call `make` to build it from the cloned repository (the binary will
end up in `bin/neofs-http-gw`).

Notable make targets:

```
dep          Check and ensure dependencies
image        Build clean docker image
dirty-image  Build dirty docker image with host-built binaries
fmts         Run all code formatters
lint         Run linters
version      Show current version
```

Or you can also use a [Docker
image](https://hub.docker.com/r/nspccdev/neofs-http-gw) provided for released
(and occasionally unreleased) versions of gateway (`:latest` points to the
latest stable release).

## Execution

HTTP gateway itself is not a NeoFS node, so to access NeoFS it uses node's
gRPC interface and you need to provide some node that it will connect to. This
can be done either via `-p` parameter or via `HTTP_GW_PEERS_<N>_ADDRESS` and
`HTTP_GW_PEERS_<N>_WEIGHT` environment variables (the gate supports multiple
NeoFS nodes with weighted load balancing).

If you're launching HTTP gateway in bundle with [neofs-dev-env](https://github.com/nspcc-dev/neofs-dev-env), 
you can get an IP address of the node in output of `make hosts` command 
(with s0*.neofs.devenv name).

These two commands are functionally equivalent, they run the gate with one
backend node (and otherwise default settings):
```
$ neofs-http-gw -p 192.168.130.72:8080
$ HTTP_GW_PEERS_0_ADDRESS=192.168.130.72:8080 neofs-http-gw
```
It's also possible to specify uri scheme (grpc or grpcs) when using `-p`:
```
$ neofs-http-gw -p grpc://192.168.130.72:8080
$ HTTP_GW_PEERS_0_ADDRESS=grpcs://192.168.130.72:8080 neofs-http-gw
```

## Configuration

In general, everything available as CLI parameter can also be specified via
environment variables, so they're not specifically mentioned in most cases
(see `--help` also). If you prefer a config file you can use it in yaml format.

### Nodes: weights and priorities

You can specify multiple `-p` options to add more NeoFS nodes, this will make
gateway spread requests equally among them (using weight 1 and priority 1 for every node):

```
$ neofs-http-gw -p 192.168.130.72:8080 -p 192.168.130.71:8080
```
If you want some specific load distribution proportions, use weights and priorities:

```
$ HTTP_GW_PEERS_0_ADDRESS=192.168.130.71:8080 HTTP_GW_PEERS_0_WEIGHT=1 HTTP_GW_PEERS_0_PRIORITY=1 \
  HTTP_GW_PEERS_1_ADDRESS=192.168.130.72:8080 HTTP_GW_PEERS_1_WEIGHT=9 HTTP_GW_PEERS_1_PRIORITY=2 \
  HTTP_GW_PEERS_2_ADDRESS=192.168.130.73:8080 HTTP_GW_PEERS_2_WEIGHT=1 HTTP_GW_PEERS_2_PRIORITY=2 \
  neofs-http-gw
```
This command will make gateway use 192.168.130.71 while it is healthy. Otherwise, it will make the gateway use 
192.168.130.72 for 90% of requests and 192.168.130.73 for remaining 10%.

### Keys
You can provide wallet via `--wallet` or `-w` flag also you can specify account address using `--address` 
(if no address provided default one will be used). If wallet is used you need to set `HTTP_GW_WALLET_PASSPHRASE` variable to decrypt wallet. 
If no wallet provided gateway autogenerates key pair it will use for NeoFS requests.
```
$ neofs-http-gw -p $NEOFS_NODE -w $WALLET_PATH --address $ACCOUNT_ADDRESS
```
Example:
```
$ neofs-http-gw -p 192.168.130.72:8080 -w wallet.json --address NfgHwwTi3wHAS8aFAN243C5vGbkYDpqLHP
```

### Binding and TLS

Gateway binds to `0.0.0.0:8082` by default and you can change that with
`--listen_address` option.

It can also provide TLS interface for its users, just specify paths to key and
certificate files via `--tls_key` and `--tls_certificate` parameters. Note
that using these options makes gateway TLS-only, if you need to serve both TLS
and plain text HTTP you either have to run two gateway instances or use some
external redirecting solution.

Example to bind to `192.168.130.130:443` and serve TLS there:

```
$ neofs-http-gw -p 192.168.130.72:8080 --listen_address 192.168.130.130:443 \
  --tls_key=key.pem --tls_certificate=cert.pem
```

### HTTP parameters

You can tune HTTP read and write buffer sizes as well as timeouts with
`HTTP_GW_WEB_READ_BUFFER_SIZE`, `HTTP_GW_WEB_READ_TIMEOUT`,
`HTTP_GW_WEB_WRITE_BUFFER_SIZE` and `HTTP_GW_WEB_WRITE_TIMEOUT` environment
variables.

`HTTP_GW_WEB_STREAM_REQUEST_BODY` environment variable can be used to disable
request body streaming (effectively it'll make gateway accept file completely
first and only then try sending it to NeoFS).

`HTTP_GW_WEB_MAX_REQUEST_BODY_SIZE` controls maximum request body size
limiting uploads to files slightly lower than this limit.

### NeoFS parameters

Gateway can automatically set timestamps for uploaded files based on local
time source, use `HTTP_GW_UPLOAD_HEADER_USE_DEFAULT_TIMESTAMP` environment
variable to control this behavior.

### Monitoring and metrics

Pprof and Prometheus are integrated into the gateway, but not enabled by
default. To enable them use `--pprof` and `--metrics` flags or
`HTTP_GW_PPROF`/`HTTP_GW_METRICS` environment variables.

### Timeouts

You can tune gRPC interface parameters with `--connect_timeout` (for
connection to node) and `--request_timeout` (for request processing over
established connection) options.

gRPC-level checks allow gateway to detect dead peers, but it declares them
unhealthy at pool level once per `--rebalance_timer` interval, so check for it
if needed.

All timing options accept values with suffixes, so "15s" is 15 seconds and
"2m" is 2 minutes.

### Zip streaming
The gateway supports downloading files by common prefix (like dir) in zip format. You can enable compression 
using config or `HTTP_GW_ZIP_COMPRESSION=true` environment variable.

### Logging

`--verbose` flag enables gRPC logging and there is a number of environment
variables to tune logging behavior:

```
HTTP_GW_LOGGER_FORMAT=string                     - Logger format
HTTP_GW_LOGGER_LEVEL=string                      - Logger level
HTTP_GW_LOGGER_NO_CALLER=bool                    - Logger don't show caller
HTTP_GW_LOGGER_NO_DISCLAIMER=bool                - Logger don't show application name/version
HTTP_GW_LOGGER_SAMPLING_INITIAL=int              - Logger sampling initial
HTTP_GW_LOGGER_SAMPLING_THEREAFTER=int           - Logger sampling thereafter
HTTP_GW_LOGGER_TRACE_LEVEL=string                - Logger show trace on level
```

### Yaml file
Configuration file is optional and can be used instead of environment variables/other parameters. 
It can be specified with `--config` parameter:
```
$ neofs-http-gw --config your-config.yaml
```

Configuration file example:
```
listen_address: 0.0.0.0:8082

wallet:
  passphrase: 123456
  
logger:
  level: debug
  
peers:
  0:
    address: grpc://s01.neofs.devenv:8080
    weight: 1
    priority: 1
    
zip:
  compression: false 
```

To know nesting level of variable you need to cut off the prefix `HTTP_GW` from variable and split the rest parts by `_`.
For example variable `HTTP_GW_PEERS_0_WEIGHT=1` will be transformed to:
```
peers:
  0:
    weight: 1
    priority: 1
```

If parameter doesn't support environment variable (e.g. `--listen_address 0.0.0.0:8082`) form it is used as is:
```
listen_address: 0.0.0.0:8082
```

## HTTP API provided

This gateway intentionally provides limited feature set and doesn't try to
substitute (or completely wrap) regular gRPC NeoFS interface. You can download
and upload objects with it, but deleting, searching, managing ACLs, creating
containers and other activities are not supported and not planned to be
supported.

### Preparation

Before uploading or downloading a file make sure you have a prepared container. 
You can create it with instructions below.

Also in case of downloading you need to have a file inside a container.

#### Create a container

You can create  a container via [neofs-cli](https://github.com/nspcc-dev/neofs-node/releases):
```
$ neofs-cli -r $NEOFS_NODE -k $KEY container create --policy $POLICY --basic-acl $ACL
```
where `$KEY` can be a path to private key file (as raw bytes), a hex string or 
(unencrypted) WIF string,   
`$ACL` -- hex encoded basic ACL value or keywords 'private, 'public-read', 'public-read-write' and  
`$POLICY` -- QL-encoded or JSON-encoded placement policy or path to file with it

For example:
```
$ neofs-cli -r 192.168.130.72:8080 -k 6PYLKJhiSub5imt6WCVy6Quxtd9xu176omev1vWYovzkAQCTSQabAAQXii container create --policy "REP 3" --basic-acl public --await
```

If you launched nodes via [neofs-dev-env](https://github.com/nspcc-dev/neofs-dev-env)
you can get the key value from `wallets/wallet.json` or write the path to 
the file `wallets/wallet.key`.

#### Prepare a file in a container

To create a file via [neofs-cli](https://github.com/nspcc-dev/neofs-node/releases), run a command below:
```
$ neofs-cli -r $NEOFS_NODE -k $KEY object put --file $FILENAME --cid $CID 
```
where 
`$KEY` -- the key, please read the information [above](#create-a-container), 
`$CID` -- container ID.

For example:
```
$ neofs-cli -r 192.168.130.72:8080 -k 6PYLKJhiSub5imt6WCVy6Quxtd9xu176omev1vWYovzkAQCTSQabAAQXii object put --file cat.png --cid DPL2tpRiuDNmoTj5KZjD1nzDuCS8tVcxa7hsvSLDWpVM --attributes img_type=cat,my_attr=cute
```


### Downloading

#### Requests

The following requests support GET/HEAD methods. 

##### By IDs

Basic downloading involves container ID and object ID and is done via GET
requests to `/get/$CID/$OID` path, where `$CID` is a container ID, 
`$OID` is an object's (i.e. your file's) ID. 

 For example:

```
$ wget http://localhost:8082/get/Dxhf4PNprrJHWWTG5RGLdfLkJiSQ3AQqit1MSnEPRkDZ/2m8PtaoricLouCn5zE8hAFr3gZEBDCZFe9BEgVJTSocY
```

##### By attributes
There is also more complex interface provided for attribute-based downloads,
it's usually used to retrieve files by their names, but any other attribute
can be used as well. The generic syntax for it looks like this:

```/get_by_attribute/$CID/$ATTRIBUTE_NAME/$ATTRIBUTE_VALUE```

where 
`$CID` is a container ID, 
`$ATTRIBUTE_NAME` is the name of the attribute we want to use,
`$ATTRIBUTE_VALUE` is the value of this attribute that the target object should have.

If multiple objects have specified attribute with specified value, then the
first one of them is returned (and you can't get others via this interface).

Example for file name attribute:

```
$ wget http://localhost:8082/get_by_attribute/88GdaZFTcYJn1dqiSECss8kKPmmun6d6BfvC4zhwfLYM/FileName/cat.jpeg
```

Some other user-defined attribute:

```
$ wget http://localhost:8082/get_by_attribute/Dxhf4PNprrJHWWTG5RGLdfLkJiSQ3AQqit1MSnEPRkDZ/Ololo/100500
```

An optional `download=true` argument for `Content-Disposition` management is
also supported (more on that below):

```
$ wget http://localhost:8082/get/Dxhf4PNprrJHWWTG5RGLdfLkJiSQ3AQqit1MSnEPRkDZ/2m8PtaoricLouCn5zE8hAFr3gZEBDCZFe9BEgVJTSocY?download=true

```

##### Zip
You can download some dir (files with the same prefix) in zip (it will be compressed if config contains appropriate param):
```
$ wget http://localhost:8082/zip/Dxhf4PNprrJHWWTG5RGLdfLkJiSQ3AQqit1MSnEPRkDZ/common/prefix
```

#### Replies

You get object contents in the reply body (if GET method was used), but at the same time you also get a
set of reply headers generated using the following rules:
 * `Content-Length` is set to the length of the object
 * `Content-Type` is autodetected dynamically by gateway
 * `Content-Disposition` is `inline` for regular requests and `attachment` for
   requests with `download=true` argument, `filename` is also added if there
   is `FileName` attribute set for this object
 * `Last-Modified` header is set to `Timestamp` attribute value if it's
   present for the object
 * `x-container-id` contains container ID
 * `x-object-id` contains object ID
 * `x-owner-id` contains owner address
 * all the other NeoFS attributes are converted to `X-Attribute-*` headers (but only
   if they can be safely represented in HTTP header), for example `FileName`
   attribute becomes `X-Attribute-FileName` header

### Uploading

You can POST files to `/upload/$CID` path where `$CID` is container ID. The
request must contain multipart form with mandatory `filename` parameter. Only
one part in multipart form will be processed, so to upload another file just
issue new POST request.

Example request:

```
$ curl -F 'file=@cat.jpeg;filename=cat.jpeg' http://localhost:8082/upload/Dxhf4PNprrJHWWTG5RGLdfLkJiSQ3AQqit1MSnEPRkDZ
```

Chunked encoding is supported by the server (but check for request read
timeouts if you're planning some streaming). You can try streaming support
with large file piped through named FIFO pipe:

```
$ mkfifo pipe
$ cat video.mp4 > pipe &
$ curl --no-buffer -F 'file=@pipe;filename=catvideo.mp4' http://localhost:8082/upload/Dxhf4PNprrJHWWTG5RGLdfLkJiSQ3AQqit1MSnEPRkDZ
```

You can also add some attributes to your file using the following rules:
 * all "X-Attribute-*" headers get converted to object attributes with
   "X-Attribute-" prefix stripped, that is if you add "X-Attribute-Ololo:
   100500" header to your request the resulting object will get "Ololo:
   100500" attribute
 * "X-Attribute-NEOFS-*" headers are special 
   (`-NEOFS-` part can also be `-neofs-` or`-Neofs-`), they're used to set internal
   NeoFS attributes starting with `__NEOFS__` prefix, for these attributes all
   dashes get converted to underscores and all letters are capitalized. For
   example, you can use "X-Attribute-NEOFS-Expiration-Epoch" header to set
   `__NEOFS__EXPIRATION_EPOCH` attribute
 * `FileName` attribute is set from multipart's `filename` if not set
   explicitly via `X-Attribute-FileName` header
 * `Timestamp` attribute can be set using gateway local time if using
   HTTP_GW_UPLOAD_HEADER_USE_DEFAULT_TIMESTAMP option and if request doesn't
   provide `X-Attribute-Timestamp` header of its own

---
**NOTE**

There are some reserved headers type of `X-Attribute-NEOFS-*` (headers are arranged in descending order of priority):
1. `X-Attribute-Neofs-Expiration-Epoch: 100`
2. `X-Attribute-Neofs-Expiration-Duration: 24h30m`
3. `X-Attribute-Neofs-Expiration-Timestamp: 1637574797`
4. `X-Attribute-Neofs-Expiration-RFC3339: 2021-11-22T09:55:49Z`

which transforms to `X-Attribute-Neofs-Expiration-Epoch`. So you can provide expiration any convenient way. 

---

For successful uploads you get JSON data in reply body with container and
object ID, like this:
```
{
        "object_id": "9ANhbry2ryjJY1NZbcjryJMRXG5uGNKd73kD3V1sVFsX",
        "container_id": "Dxhf4PNprrJHWWTG5RGLdfLkJiSQ3AQqit1MSnEPRkDZ"
}
```

#### Authentication

You can always upload files to public containers (open for anyone to put
objects into), but for restricted containers you need to explicitly allow PUT
operations for request signed with your HTTP Protocol Gateway keys.

If your don't want to manage gateway's secret keys and adjust eACL rules when
gateway configuration changes (new gate, key rotation, etc) or you plan to use
public services, there is an option to let your application backend (or you) to
issue Bearer Tokens ans pass them from the client via gate down to NeoFS level
to grant access.

NeoFS Bearer Token basically is a container owner-signed ACL data (refer to NeoFS
documentation for more details). There are two options to pass them to gateway:
 * "Authorization" header with "Bearer" type and base64-encoded token in
   credentials field
 * "Bearer" cookie with base64-encoded token contents

For example you have a mobile application frontend with a backend part storing
data in NeoFS. When user authorizes in mobile app, the backend issues a NeoFS
Bearer token and provides it to the frontend. Then the mobile app may generate
some data and upload it via any available NeoFS HTTP Protocol Gateway by adding
the corresponding header to the upload request. Accessing the ACL protected data
works the same way.

##### Example
In order to generate bearer token, you need to know container owner key and 
address of sender who will be do request to NeoFS (in our case it's gateway wallet address).

Suppose we have:
* **KxDgvEKzgSBPPfuVfw67oPQBSjidEiqTHURKSDL1R7yGaGYAeYnr** (container owner key)
* **NhVtreTTCoqsMQV5Wp55fqnriiUCpEaKm3** (token owner address)
* **BJeErH9MWmf52VsR1mLWKkgF3pRm3FkubYxM7TZkBP4K** (container id)

Firstly we need to encode container id and sender address to base64 (now it's base58). 
So use **base58** and **base64** utils.

1. Encoding container id:
```
$ echo 'BJeErH9MWmf52VsR1mLWKkgF3pRm3FkubYxM7TZkBP4K' | base58 --decode | base64
# output: mRnZWzewzxjzIPa7Fqlfqdl3TM1KpJ0YnsXsEhafJJg=
```

2. Encoding token owner id:
```
$ echo 'NhVtreTTCoqsMQV5Wp55fqnriiUCpEaKm3' | base58 --decode | base64
# output: NezFK4ujidF+X7bB88uzREQzRQeAvdj3Gg==
```

Now we can form Bearer token (10000 is liftetime expiration in epoch) and save it to **bearer.json**:
```
{
    "body": {
        "eaclTable": {
            "version": {
                "major": 0,
                "minor": 0
            },
            "containerID": {
                "value": "mRnZWzewzxjzIPa7Fqlfqdl3TM1KpJ0YnsXsEhafJJg="
            },
            "records": []
        },
        "ownerID": {
            "value": "NezFK4ujidF+X7bB88uzREQzRQeAvdj3Gg=="
        },
        "lifetime": {
            "exp": "10000",
            "nbf": "0",
            "iat": "0"
        }
    },
    "signature": null
}
```

Then sign it with container owner key:
```
$ neofs-cli util sign bearer-token --from bearer.json --to signed.json -k KxDgvEKzgSBPPfuVfw67oPQBSjidEiqTHURKSDL1R7yGaGYAeYnr
```
Encoding to base64 to use via header:
```
$ base64 -w 0 signed.json 
# output: Ck4KKgoECAIQBhIiCiCZGdlbN7DPGPMg9rsWqV+p2XdMzUqknRiexewSFp8kmBIbChk17MUri6OJ0X5ftsHzy7NERDNFB4C92PcaGgMIkE4SZgohAxpsb7vfAso1F0X6hrm6WpRS14WsT3/Ct1SMoqRsT89KEkEEGxKi8GjKSf52YqhppgaOTQHbUsL3jn7SHLqS3ndAQ7NtAATnmRHleZw2V2xRRSRBQdjDC05KK83LhdSax72Fsw==
```

After that Bearer token can be used:

```
$ curl -F 'file=@cat.jpeg;filename=cat.jpeg' -H "Authorization: Bearer Ck4KKgoECAIQBhIiCiCZGdlbN7DPGPMg9rsWqV+p2XdMzUqknRiexewSFp8kmBIbChk17MUri6OJ0X5ftsHzy7NERDNFB4C92PcaGgMIkE4SZgohAxpsb7vfAso1F0X6hrm6WpRS14WsT3/Ct1SMoqRsT89KEkEEGxKi8GjKSf52YqhppgaOTQHbUsL3jn7SHLqS3ndAQ7NtAATnmRHleZw2V2xRRSRBQdjDC05KK83LhdSax72Fsw==" \
  http://localhost:8082/upload/BJeErH9MWmf52VsR1mLWKkgF3pRm3FkubYxM7TZkBP4K
# output:
# {
#	"object_id": "DhfES9nVrFksxGDD2jQLunGADfrXExxNwqXbDafyBn9X",
#	"container_id": "BJeErH9MWmf52VsR1mLWKkgF3pRm3FkubYxM7TZkBP4K"
# }
```

##### Note
For the token to work correctly, you need to create a container with a basic ACL that:
1. Allow PUT operation to others
2. Doesn't set "final" bit

For example:
```
$ neofs-cli --key KxDgvEKzgSBPPfuVfw67oPQBSjidEiqTHURKSDL1R7yGaGYAeYnr --basic-acl 0x0FFFCFFF -r 192.168.130.72:8080 container create --policy "REP 3"  --await
```

To deny access to the container without a token, set the eACL rules:
```
$ neofs-cli --key KxDgvEKzgSBPPfuVfw67oPQBSjidEiqTHURKSDL1R7yGaGYAeYnr -r 192.168.130.72:8080 container set-eacl --table eacl.json --await --cid BJeErH9MWmf52VsR1mLWKkgF3pRm3FkubYxM7TZkBP4K
```

File **eacl.json**:
```
{
    "version": {
        "major": 0,
        "minor": 0
    },
    "containerID": {
        "value": "mRnZWzewzxjzIPa7Fqlfqdl3TM1KpJ0YnsXsEhafJJg="
    },
    "records": [
        {
            "operation": "PUT",
            "action": "DENY",
            "filters": [],
            "targets": [
                {
                    "role": "OTHERS",
                    "keys": []
                }
            ]
        }
    ]
}
```

### Metrics and Pprof

If enabled, Prometheus metrics are available at `/metrics/` path and Pprof at
`/debug/pprof`.