Provide shard mode information via `DumpInfo()`. Delete atomic field from
Shard structure since it duplicates new field.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Shard's mode was not used in the Node, so added only two modes whose roles
are clear. More modes will be added in the future.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Without sanity check, container service provides successful response,
even though such request will never be approved by Alphabet nodes.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
When application is being terminated, replicator routine
might be on the object picking phase. Storage is terminated
asynchronously, thus `Select()` may return corresponding
error. If we don't process `context.Done()` in this case,
then application freezes on shutdown.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Make `flushBigObjects` routine to mark objects which are written to
`BlobStor`. This prevents already flushed objects from being written on
the next iterator tick.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
For fullness estimation of `Blobovnicza` we use number of object stored
in each size bucket. In previous implementation we multiplied the number
by the difference in bucket boundaries. This expression rather
estimated the minimum volume (and for the smallest bucket, the maximum)
of objects in the bucket.
Multiply number of objects by mean bucket size.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make `syncFullnessCounter` to accept `bbolt.Tx` argument of Bolt
transaction within which counter should be synchronized. Pass
corresponding transaction during `Init`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In notary disabled environment, approval of container creation with nice
name attribute takes much more additional GAS than other operations
(due to NNS invocation).
Morph library changes:
* add the ability to specify per-op fees using `StaticClient` options;
* add the ability to customize fee for `Put` operation with named
container in container morph client.
Inner Ring changes:
* add `fee.named_container_register` config value which specifies
additional GAS fee for the approvals of the named container
registrations;
* pass the config value to `WithCustomFeeForNamedPut` option of
container morph client.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
According to BoltDB documentation bucket `value is only valid for the
life of the transaction`.
Make `DB.IsSmall` copy value slice in order to prevent potential memory
corruptions (e.g. `runtime.stringtobyteslice` cast).
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
After https://github.com/nspcc-dev/neofs-contract/issues/154 alphabet
nodes should call `Register` method for approval of the notary
notifications spawned by `AddPeer` method.
Call `register` method for peer approval in Netmap processor.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Notary event name equals to the name of the method which throws the
event.
Define name const of notary subnet creation.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Use persistent flags on parent command in order to inherit flags in
sub-commands. Turn on notary mode of morph client in `subnet` command of
admin utility for notary environments.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make `Client.EnableNotarySupport` method to call `NNSContractAddress`
for proxy contract if it is not specified in corresponding option.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Add `subnet` command which contains all subnet-related commands. Add
sub-commands:
* `create` for creation;
* `remove` for removal;
* `get` for reading;
* `admin` for admin management;
* `client` for client management.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Define notification events, implement parsers. Add morph client of
Subnet contract. Listen, verify and approve events in Inner Ring app.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Continues replication executed in separate pool of goroutines,
so there is no need in worker to handle replication tasks
asynchronously.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Upgrade NeoFS API Go library to version with status returns. Make all API
clients to pull out and return errors from failed statuses. Make signature
service to respond with status if client version supports it.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
ListWithCursor allows listing physically stored objects
from metabase with small chunks. Cursor tracks last
processed object, therefore new chunks are returned
on each request.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Add hash of the TX that generated notification
to neofsid event structures. Adapt all
neofsid wrapper calls to new structures.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Add hash of the TX that generated notification
to neofs/netmap event structures. Adapt all
neofs/netmap wrapper calls to new structures.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Add optional parameters to the client call
signature. Group parameters of a client call
into struct to improve future codebase
support.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Add optional parameters to the client call
signature. Group parameters of a client call
into struct to improve future codebase
support.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Parsers should have original notification
structure to be able to construct internal
event structure that contains necessary
for unique nonce calculation information.
So notification parsers take raw notification
structure instead of slice of stack items.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Make `BlockExecution` / `ResumeExecution` to not release per-shard worker
pools. Make `StorageEngine.Close` to block these methods and any
data-related operations. It is still releases the pools.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Use `sync.Once` to prevent locks of stopping GC. It will also allow to
safely call `Shard.Close` multiple times.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Add `MAINTENANCE` value to `NetmapStatus` enum in Control API. The status is
going to be used to toggle maintenance mode of the storage node.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There is a need to disable execution of local data operation on storage
engine in runtime. If storage engine ops are blocked, node will act like
always but all local object operations will be denied.
Implement `BlockExecution` / `ResumeExecution` methods on `StorageEngine`
which blocks / resumes the execution of data ops. Wait for the completion of
all operations executed at the time of the call. Return error passed to
`BlockExecution` from all data-related methods until `ResumeExecution` call.
Make `Close` to block operations as well.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation IR handler of `AddPeer` notification didn't send
registration to contract if existing peer changed has changed its
information. as a consequence, the network map members could not update the
information without going into offline.
Change `processAddPeer` handler to check if
* candidate in the network map is a brand new
* or information about the network map member was changed
and call `AddPeer` method if so.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
All objects in NeoFS must have owner ID. In previous implementation Object
Delete service handler set owner ID from request session token. If removal
was executed w/o a session, object with tombstone was prepared incorrectly.
In order to fix this node should set its own ID and become an owner of the
tombstone object.
Extend `NetworkInfo` interface required by Object.Delete handler with
`LocalNodeID` method which returns `owner.ID` of the local node. Implement
the method on `networkState` component of storage node application which is
updated on each node state change in NeoFS network map. Set owner returned
by `LocalNodeID` call as tombstone object's owner in Delete handler.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation node returns "access denied" on Object.Put with
object with unset owner. Although object owner must be set, its absence
should not be considered as access error. The same applies to sender key.
Check owner ID and public key emptiness only if sticky bit is set.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Also, add ErrNNSRecordNotFound error that
indicates that required hash is not presented
in `NNS` contract.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
The client needs of the Object service are limited and change not often.
Interface changes of the client library should not affect the operation of
various service packages, if they do not change their requirements for
the provided functionality. To localize the use of the base client and
facilitate further support, an auxiliary package is implemented that will
only be used by the Object service.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Timer is not suitable for notary deposits because it can never fire
in case of desynchronization or external epoch changes. Notary deposits
must be handled on new epoch event.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
a1696a8 introduced some logic which in some situations prevented big objects
to be persisted in FSTree. In this commit a refactoring is done with the
goal of simplifying the code and also checking #866 issue.
1. Split a monstrous function into multiple simple ones: memory objects
can only be small and for writing through the cache we can do a dispatch
in `Put` itself.
2. Determine objects to be put in database before the actual update
as setting up a transaction has non-zero overhead.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
The client needs of the IR application are very limited and rarely change.
Interface changes of the client library should not affect the operation of
various application packages, if they do not change their requirements for
the provided functionality. To localize the use of the base client and
facilitate further support, an auxiliary package is implemented that will
only be used by the IR application.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There is no point to pass key storage in parameters because
it can be defined on the service level of application.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
`CommonPrm` structure has private key for remote operations.
It obtained in the beginning of request processing. However,
not every operation triggers remote calls. Therefore, key
might not be used. It is important to avoid early key fetching
because `TokenStore` now returns error if session token does not
exist. This is valid case when container nodes receive request with
session token (for ACL pass) and they should process request locally.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
This is invalid operation for storage nodes that receive part of split
object. While object is signed by session token, the message itself
should be signed by the node key.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Container listing should not ignore tombstone and
storage group objects which are not stored in
primary buckets.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Do not set `till` as some constant:
use maximum of two values instead:
1. currentDepositTill;
2. currentHeight+epochDuration+constant.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Some of the pools are initialized during config initialization,
so it isn't possible currently to release them in one place.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Add name and zone arguments to `Put` method of wrapper over the Container
contract client. Pass result of `container.GetNativeNameWithZone` function
to the method in `Put` helper function. Due to this, the storage node will
call the method depending on the presence of the container name in the
attributes.
Make IR to listen `putNamed` notification event. The event is processed like
`put` event, but with sanity check of the container attributes.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Add `PutArgs.SetNativeNameWithZone` method which sets native name and zone
for container. Call `putNamed` method of Container contract if name is set,
otherwise call `put` method.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement `ParsePutNamedNotary` function which parses `PutNamed` structure
from `event.NotaryEvent`. Share common code with `ParsePutNotary` function.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Define `PutNamed` structure of notary notification from `putNamed` method of
Container contract. Embed `Put` type in order to inherit methods and
parsing of common parts with `put` method.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement `StringFromOpcode` function that tries to retrieve `string` to
`Op`. Add a comment about neo-go source code that is used for implementation
of converters.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
`WSClient` of Neo Go v0.97.3 sets value of notification with
`NotificationEventID` to `subscriptions.NotificationEvent` type which wraps
previously used `state.NotificationEvent`.
Change type cast and pull `state.NotificationEvent` structure from new type.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make the implementation of network info source (Netmap V2 service
dependency) to read MillisecondsPerBlock sidechain parameter and NeoFS
network parameters depending on the client version.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement `Client.ListConfig` method which calls `listConfig` method of
Netmap contract. Implement `Wrapper.IterateConfigParameters` method which
uses previous one. Implement `wrapper.WriteConfig` helper function which
allows to interpret parameters by names.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
IR tries to keep 1:3 proportion of GAS and
notary balances respectively. If that proportion
has been messed(means that notary balance is
lower than required) it sends half of its
GAS balance to the notary service.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
