NeoFS containers can be removed within a trusted session. There is a need to
take this into account during removal inspection.
Define `SessionToken` / `SetSessionToken` methods on `RemovalWitness` struct
in order to embed `session.Token` to it.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make `wrapper.Delete` function to accept `container.RemovalWitness` struct
instead of its separated elements. `Signature` type is replaced by binary
signature since public key is unused.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Define `RemovalWitness` structure which groups the information required to
prove and verify the removal of a container. This type is going to be used
in container Delete-related methods.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Unmarshal session token from `EACLValues` and write it to resulting
`eacl.Table` structure in `Wrapper.GetEACL` method.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
`EACL` method of `Container` contract returns binary session token, key and
signature along with eACL table.
Provide `Signature`, `PublicKey` and `SessionToken` getters from
`EACLValues` structure. Parse and set all values in `Client.EACL` methods.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Approved eACL table should be stored in sidechain along with related session
token.
Forward session token from `SetEACL` event to `Wrapper.PutEACL` method.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
The 4th item of `SetEACL` container notification event is a byte array of
serialized session token.
Parse session token in `ParseSetEACL` function. Provide
`SetEACL.SessionToken` method.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
If eACL table is set via session, then session token should be written to
it.
Write session token from request meta header to `eacl.Table` structure which
is passed to `wrapper.PutEACL` function.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Rename `PutContext` to `ContextWithToken` and implement its constructor as a
separate function in order to reuse it in other RPCs.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
`SetEACL` method of latest `Container` contract accepts binary session token
as an argument.
Provide `SetEACLArgs.SetSessionToken` method. Accept session token as a
`[]byte` in `Wrapper.PutEACL` method and attach it to `SetEACLArgs`. Marshal
session token from container in `wrapper.PutEACL` function and pass it to
the method.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Unmarshal session token from `GetValues` and write it to resulting
`Container` structure in `Wrapper.Get` method. Write key-signature pair from
`GetValues` to resulting `Container` structure in `Wrapper.Get` method.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
`Get` method of `Container` contract returns binary session token, key and
signature along with container.
Provide `Signature`, `PublicKey` and `SessionToken` getters from `GetValues`
structure. Parse and set all values in `Client.Get` methods.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Approved container should be stored in sidechain along with related session
token.
Forward session token from `Put` event to `Wrapper.Put` method.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
The 4th item of `Put` container notification event is a byte array of
serialized session token.
Parse session token in `ParsePut` function. Provide `Put.SessionToken`
method.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
If container is created via session, then session token should be written to
it.
Write session token from request meta header to `Container` structure which
is passed to `wrapper.Put` function.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
`Put` method of latest `Container` contract accepts binary session token as
an argument.
Provide `PutArgs.SetSessionToken` method. Accept session token as a `[]byte`
in `Wrapper.Put` method and attach it to `PutArgs`. Marshal session token
from container in `wrapper.Put` function and pass it to the method.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation wrapper over the Container contract's client
accepted the signature of the eACL table in addition to itself. After recent
changes in API Go lib table carries its signature. Thus, it is redundant
to pass the eACL table signature separately.
Make `wrapper.PutEACL` method to accept `eacl.Table` only.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation wrapper over the Container contract's client
accepted the signature of the container in addition to itself. After recent
changes in API Go lib container carries its signature. Thus, it is redundant
to pass the container signature separately.
Make `wrapper.Put` method to accept `Container` only.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation wrapper over the Container contract's client
returned the signature of the eACL table in addition to itself. After recent
changes in API Go lib table carries its signature. Thus, it is redundant to
return the table signature separately.
Make `Wrapper.GetEACL` method to return only `eacl.Table` with error.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In recent API changes `GetExtendedACLResponseBody` carries session token.
In recent API Go lib changes `eacl.Table` structure carries related session
token.
Write session token of eACL table from sidechain to GetExtendedACL response
body in node's `ContainerService` server.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In recent API changes `GetResponseBody` carries session token and signature.
In recent API Go lib changes `Container` structure carries its session
token and signature.
Write session token and signature of container from sidechain to Get
response body in node's `ContainerService` server.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
As it explained in previous commit, session token also should
be presented in original meta header but can be omitted in higher
layers.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Request meta headers are organized in a layers, where
upper layers re-sign down layers. Bearer token should be
a part of original meta header and it can be omitted in
upper layers. Therefore we need to traverse over linked list
of meta header to the original meta header to get bearer token.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
`eACL` method of `Container` contract returns structure with 4 fields (the
4th is a recently added binary session token).
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Change expected event items to 4 in order to support new binary session
token item. Parsing of the session token will be implemented later.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Construct wrapper over the Container contract client with `TryNotary` option
since it is required to perform invocations of notary contract.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
All client wrappers should use underlying static client with enabled notary
work mode in order to produce invocations of notary contract.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Some of the client wrapper's methods should produce notary contract's
invocations. In previous implementation all wrappers provided separate
methods to do it. Since notary and non-notary invocation scenarios have very
different goals, it makes sense to separate the scenarios of using the
client wrapper at the stage of its creation.
Define `Option` constructor for container client wrapper. Add `TryNotary`
option which enables tries of the notary invocations on underlying static
client. Mark all notary-dedicated methods as deprecated.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There are two scenarios of invocation of contract methods:
1. do not invoke notary contract;
2. try to invoke notary contract if it is enabled in Client.
Taking this into account, `StaticClient` can work in one of the two described
modes. Based on this, it makes sense at the stage of creating `StaticClient`
to fix the call mode, and the further abstract from it.
Define `StaticClientOption` setters of `StaticClient` optional parameters.
Add `TryNotary` constructor of option which enables notary tries. Call
`NotaryInvoke` on underlying `Client` if the option is provided, otherwise
call `Invoke`. Mark `NotaryInvoke` method of `StaticClient` as deprecated.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Pass session token (byte array) and bind key flag (boolean) arguments to
`Put` method call of `Container` contract.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Change expected event items to 4 in order to support new binary session
token item. Parsing of the session token will be implemented later.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Owner identifier can be calculated from public key. If it matches, no
additional verification of key ownership is required.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Get all owner keys and verify container ID signature until first success. If
none of the keys match, then prohibit deletion. Thus, the delete operation
is only allowed to the owner of the container. With this approach, a
separate check for key ownership is not required.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make `Get` method of the wrapper over Container contract's client to
accept binary container ID. Create `Get` function similar to the previous
`Get` variation. Use this function in Container service server in the place
where `Get` method was used.
Additionally implement `AsContainerSource` function which allows
to simply compose container Source interface from the wrapper.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Call `Delete` method on the wrapper over the Container contract's client
directly from `Processor.approveDeleteContainer`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make `Delete` method of the wrapper over Container contract's client to accept
two binary parameters: container ID and signature. Create `Delete` function
similar to the previous `Delete` variation, but accepting `Signature`
structure instead of binary signature. Use this function in Container
service server in the place where `Delete` method was used.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Call `Put` method on the wrapper over the Container contract's client
directly from `Processor.approvePutContainer`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
`Put` method of the wrapper over the Container contract's client does not
modify passed binary container, so it makes no sense to calculate the
identifier.
`Put` method returns the error only from now. Function `Put` calculates
identifier itself since it is still required by function signature.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make `Put` method of the wrapper over Container contract's client to accept
three binary parameters: container, key and signature. Create `Put` function
similar to the previous `Put` variation, but accepting `Signature`
structure instead of binary key and signature. Use this function in
Container service server in the place where `Put` method was used.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Split up `processContainerPut` and `processContainerDelete` methods of
container `Processor` into two sub-methods: checking the event and its
assertion.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Morph event structures defined in `pkg/morph/event` should only carry
notification values without any additional interpretation. All logical work
should be concentrated on app-side.
Change data type of `Put.PublicKey` return to byte slice. `ParsePut` doesn't
unmarshal public key from now.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Add `setEACL` notification event parser (handler) to the return of the
`ListenerParsers` (`ListenerHandlers`) method. Read address of NeoFS ID
contract from `contracts.neofsid` config. Implement `NewNeoFSIDClient`
constructor in `invoke` package and use it in IR application.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Pre-allocate slices for a known number of elements. Use single `ParserInfo`
/ `HandlerInfo` variable in order to set Container contracts's address once
and change only values that differ between events.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Use NeoFS ID contract client to check if public key from notification event
is tied to the owner of the container for which the eACL is being changed.
Approve changes coming from the owner of the container only.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Add signature check to `checkSetEACL` method of the `setEACL` notification
handler in Container processor.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement `handleSetEACL` method similar to other handling methods in
Container processor. To begin with, the validation logic is skipped, and all
tables will be sent to the contract. In the future, the necessary checks
will be implemented. Listening for events in the IR node will also be added.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Define `SetEACL` structure of eACL table change notification from Container
contract. Implement function which parses `SetEACL` event structure from
stack item list.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In recent changes argument list of set eACL call of Container contract
client was extended with binary public key. In the future there will be a
need to pass the table in binary format.
Replace `PutEACL` method with `PutEACLBinary` one which accepts three binary
parameters: eACL table, key and signature. Create `PutEACL` function similar
to the removed method, but accepting `Signature` structure instead of just
a signature. Use this function in Container service server in the place
where `PutEACL` was used.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Add `SetEACLArgs.SetPublicKey` method which sets binary public key argument
of the "set eACL" contract call. Attach key to the `Invoke` call.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
If object to be inhumed is root we need to continue first traverse over the
shards. In case when several children are stored in different shards,
inhuming object in a single shard leads to appearance of inhumed object in
subsequent selections. Also, any object can be already inhumed, and this
case is equivalent to successful inhume.
Do not fail on `object.ErrAlreadyRemoved` error. Continue first iterating
over shards if we detected root object (`SplitInfoError`).
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Write unit tests of `StorageEngine.Inhume` which assert that inhumed objects
don't appear in `Select` result.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Request forwarding callback should be called only if set since it is an
optional parameter.
Call `forwarder` function only if it is non-nil.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Request forwarding callback should be called only if set since it is an
optional parameter. In GetRangeHash forwarder is never set.
Call `forwarder` function only if it is non-nil. Remove no longer needed
`hashOnly` option.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Wrap functions at `pkg/errors` return nil if error argument
was nil. fmt.Errorf always returns error so we need to add
missing error checks to the code.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Implement wrapper over NeoFS ID contact's client which allows to which
allows you to conveniently interact with the contract. Implement
`AccountKeys` method for getting a list of keys by account ID.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement NeoFS ID contact's client which is responsible for collecting call
arguments and parsing stack items. Initially only key listing method is
supported.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In current implementation `Object.GetRangeHash` RPC handler forwards range
requests for payload data. Missing request forwarder of the original request
caused NPE during execution.
Do not call request forwarder if payload range hash is requested.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Before fix `:8080` host address was parsed as `/dns4/tcp/8080`
multiaddress. However such multiaddress is not correct. In this
case `dns4` section should be omitted, but it breaks `manet.DialArgs`.
To solve this issue we explicitly set 0.0.0.0 address.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
To enable TLS support we can't operate with IP addresses directly.
Certificates are issued with host names so it is required to
pass them into RPC client. DNS resolving should be done by transport
layer and not be a part of node. Therefore `IPAddrString` usage is
removed from code.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
network.Address is a wrapper around multiaddress. Multiaddress
can be resolved to ip netaddr with `IPAddrString` function:
/dns4/localhost/tcp/8080 => 127.0.0.1:8080
With `HostAddrString` multi address will be transformed to
host address:
/dns4/localhost/tcp8080 => localhost:8080
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Rename `util/profiler` package to `httputil` and refactor it:
* simplify utility HTTP server;
* make more generic server's parameters in order to remove `viper.Viper`
dependency;
* use single constructor for creating the pprof and prometheus servers;
* replace `enabled` config value with empty-check of the network address.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Replace `viper.Viper` parameter with `Prm` structure. Currently only logging
level can be parameterized through string setter.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Remove setting of `app_name` and `app_version` fields in `NewLogger`
constructor. Set these fields in Node and IR application in already
constructed log and remove them from viper .
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Change logger's encoding to `console`, time encoding to `ISO8601TimeEncoder`
and leave all other options as they are in `zap.NewProductionConfig`.
Remove default values of no longer existing options in node/ir config.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Including:
- typo fix for `StringFromStackItem` error msg
- EigenTrust alpha getter.
- renaming local var in reading uin64 values
from global cfg function
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
For N3 Testnet RC2 release inner ring app supports three modes:
- notary enabled in all chains (default),
- notary disabled in all chains,
- notary enabled only in side chain.
All notary related functions are moved to notary.go
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Processors that use `invoke` package to make chain invocation should provide
fee config and client with enabled or disabled notary support. If notary
support is disabled, then functions from `invoke` package will perform
ordinary method invocation with extra fee.
Processors that use `morph/client` wrappers should check `notaryDisabled`
flag to call corresponding wrapper function.
Netmap processor omits some actions during validator syncronization
if notary is disabled.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
When notary disabled, inner ring should be able to
configure extra fee for vote collections inside the
contracts. Previously these values were hardcoded,
however we might want to change them depending on
a environment.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
With `mainnet.notary_deposit=false` inner ring will ignore
notary deposit \ awaiting routines in the application start,
so it can run on the environments without notary support.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
To enable notary support in main chain, notary subsystem should not get
alphabet keys from (main chain) committee. This key fetcher is now
separated and may be overwritten by `WithAlphabetSource` option.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
With neo-go v0.94.1 verification fee can be calculated
precisely and alphabet keys are fetched from committee
instead of network map contract.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Includes:
- Delete first `ctx` argument in `Write` method.
- Move intermediate Initial trust struct and method
to `calculator` file.
- Change Alpha to 0.1.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Delete reading `alpha` from env var. Cover
retrieving `alpha` behind interface in
intermediate calculator. Add TODO to decide
if it is necessary to receive that param from
global config or not.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Add implementation of Builder interface for
intermediate trusts. Move all code associated
with managers to `common` directory in `cmd`
and `pkg/services/reputation`
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Change anonymous func arg for `Iterate`
methods of Storages to `PeerTrustsHandler`
type for implementing corresponding
interface.
Implement missing `Iterate` method for
daughter Storage.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Alphabet nodes synchronize list of alphabet keys from main chain
`NeoFSAlphabet` role once per epoch. This can lead to a wrong behavior in
single chain deployment (`without_mainnet` config parameter). Alphabet node
in single chain environment will try to get NeoFSAlphabet role from main
chain client, but it'll get result from side chain instead. Side chain
stores list of all inner ring nodes in this role. Therefore it is possible
that alphabet nodes will try to appoint inner ring nodes as alphabet nodes,
which is not correct.
Fix incorrect behavior with disabling of synchronization of alphabet keys in
sidechain-only mode.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Allocate capacity instead of length of the slice to write the object payload
range since each chunk is written through `append`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation node's Object Get/Head/GetRange V2 service
handlers created a new request for each RPC. Now original requests are
re-signed according to API specification. Logical handler abstracts from
this version-dependent logic through `RequestForwarder` callback.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation node's Object Search V2 service handler created a
new request for each RPC. Now original requests are re-signed according to
API specification. Logical handler abstracts from this version-dependent
logic through `RequestForwarder` callback.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Evicting from cache requires closing blobovnicza which
in turn needs to lock `activeMtx`. This lock is not needed on
every addition, but our LRU library doesn't return evicted keys.
In future we may consider switching to other implementation.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Neo node can return integers values where []byte is expected.
To cover such cases, try to parse integers in `BytesFromStackItem`.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Add handler closure over worker pool
in the event package.
Add `addNewEpochAsyncNotificationHandler`
function that uses that closure. Pass
the reputation report handler to worker
pool via using that function.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
This function already reused in different storage engine parts
so it makes sense to keep it in separate package.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Different SplitInfo parts may be stored in different shards. Storage
engine must not stop at first SplitInfoError and should make
best effort to complete SplitInfo structure if needed.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
There were no unit tests of storage engine. This commit
adds first test to reproduce missing link ID in split info
at `engine.Head(raw)` request.
Engine tests uses some constructors from metabase tests,
so it is better to locate such functions in common
package at local_object_storage.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Add checking if returned error contains
"already on chain" substring. Do not
consider that behavior to be erroneous.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
If non-"HALT" `State` occurs after
calling `InvokeFunction` NeoGo client
method, add `FaultException` information
to returning error. Add returning state
check to `NotaryInvoke` method of the
morph/client.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
New neo-go version provides:
- new type for roles in `RoleManagement` contract,
- methods to get keys from `RoleManagement` contract,
- new way to sign notary transaction.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Add `Router` to the reputation server. `Router` is
called on every incoming request and inits `Writer`
that sends `Trust`s to the next route point or
handle(logs in that implementation) them if current
node is the end point of the route.
Rename `onlyKeyRemoteServerInfo` struct for container
to separate it from the same implementation of the
same `ServerInfo` interface for reputation.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Declare interfaces for building list of
managers of certain peer in certain epoch.
Implement `Builder` struct that aggregates
fields that are necessary for building
list of managers.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Implement reputation `Router` and its constructor,
designed to define where to send local trusts.
Router is based on dependencies that are hidden
behind interfaces, that are declared in the router's
package.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Mint, Burn and Cheque details should contain hash of
main net tx of Deposit and Withdraw invocation. They will
be formatted inside the contracts so alphabet nodes must
not modify them.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Unified format uses transfer type as the first byte
and extra details next. List of transfer types used in
contracts defined in `details.go`. It includes:
- audit settlement,
- basic income collection,
- basic income distribution.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
`Inhume` operation can be performed on already deleted objects, and in this
case the entry will be added to the graveyard. `Delete` operation finishes
with error if object is not presented in metabase. However, the entry in the
cemetery must be deleted regardless of the presence of the object.
Additionally, now `Delete` does not return an error in the absence of an
object.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Extra blocks for notary deposit must not be less than extra blocks
at notary tx rounding.
Consider you make notary deposit every 1000 block for next
1100 blocks. At block 555 you made notary deposit up to 1655.
At block 1554 you want to send notary tx. Notary client uses rounding
to calculate `until` value. By default notary client rounds with up
to 150 block ahead, thus for tx at 1554 `until` will be 1700.
1700 is bigger than deposit limit at 1655 and tx will fail. However
if extra blocks for notary deposit will be 200, then this case
won't be possible.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Implement gRPC ReputationServiceServer on structure that forwards requests
to underlying NeoFS API v2 ReputationService `Server`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Hex encoded values are often may be misinterpreted as base58
values. Reverse case is quite rare, so it is better to try
hex decoding first.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Alias type provide sort function so it is better to use it
everywhere where list of public keys is presented.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
This method has been removed from netmap contract. Corresponding
event from neofs contract renamed to AlphabetUpdate and should not
be processed, because alphabet updated from `RoleManagement`
contract.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
RoleManagement native contract (ex designate contract) stores list
of keys per role. Main net uses NeoFSAlphabet role to store keys of
alphabet nodes of inner ring. Side chain uses the same role to store
keys of all inner ring nodes, including alphabet.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Committee invocations use other M/N parameters of multi signature
signer address. For committee M = N/2 + 1
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Replace usage of `cache.ClientCache` type with interface with similar
signature. This will further allow overloading clients without affecting the
logic of dependent packages.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement in-memory `Storage` which is going to be used to submit the
results of interactions with network members. `Storage` also provides an
iterator interface, so the component can be used in `Controller`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement `Controller` designed to analyze the values collected by the local
node (the source is hidden behind Writer/WriterProvider interfaces) and
transfer them to the destination (hidden behind Iterator / IteratorProvider
interface).
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Metabase should not store payloads of objects. Make Put operation to cut
object payload before saving binary object in metabase.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Metabase should not store payloads of objects. Set payload in generated test
object. Ascertain that objects returned by Get method have no payload.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
On the `Deposit` events add gas balance check.
Make transfer only if the balance is greater
than the `GasTransferThreshold` that is defined
with environmental variable.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
At object.Put operation node does not transfer any
data. It is done in the stream inside, so we should
register duration from `object.Put` invocation until
`CloseAndRecv` on the stream.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
We can't rely on object size in the header because it
might be omitted on initial put or it can be 0xFF.. on
streaming data.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Because options are not used when client is already in cache
providing them to shared cache is misleading at best.
In the worst case `dial_timeout` is set randomly (because of race
condition) which can lead to one service having `dial_timeout` of
another. Thus we set default client creation options when cache is
created.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Replace `eacl.Storage` interface implementation from eACL lib to neofs-node
app package. Remove `eacl.WithMorphClient` option in order to abstract eACL
validator from eACL storage implementation.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Previously UN-LOCODE attribute was required for each network map candidate.
In the absence of this attribute, the candidate was not allowed into the
network map. After revising the requirements for candidates, it was decided
not to require the mandatory installation of the attribute by candidates.
From now inner ring does not modify location attributes of the network map
candidate in the absence of UN-LOCODE attribute and does not block entry
into the network map for this criterion.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
With UN/LOCODE support, storage node may have
`UN-LOCODE` attribute. Policy parser should support
both `Ident` and `Strings` as filter keys to parse
rules such as `FILTER "UN-LOCODE" EQ "RU LED" AS F`.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Right now we pass redundant copy to callback outside the for-loop through
the helpful boolean variable instead of calling it deeply nested.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Detect redundant local copy of the object in Object Policer. Add redundant
copy callback (`WithRedundantCopyCallback` option). Pass address of the
redundant copy to callback.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Add `InhumePrm.MarkAsGarbage` method which marks passed objects to be
removed from local storage. Update `InhumePrm.WithTarget` doc to prevent
conflicting use with the new method.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
NeoFS contract can be deployed in sidechain instead of main chain.
Add `without_mainnet` config flag that can switch IR node to work with
sidechain only. By default this flag is unset.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation IR worked with exactly 7 alphabetic contracts
only. Actually number of contracts is limited to only the Glagolitic
alphabet.
Make IR to work with any valid number of alphabetic contracts. Change parser
of alphabetic contract addresses to read amount of processing contracts
before performance. Make Alphabet processor to use interface of the
alphabetic contract group. Use `alphabetContracts` type in IR `Server`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Define `alphabetContracts` type that map glagolic letters to smart contract
addresses. Implement constructor and all methods which are going to be used
in IR processing.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Define `glagolicLetter` enumeration of the Glagolitsa alphabet letters.
Implement `configString` method that returns config-compatible string format
of the letters.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There is no need to specify that IR indices are 32 bits in size.
Change return types of `Indexer` interface methods in audit and alphabet
packages. Support interface changes in `Server` implementation.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Re-compile protobuf definition of Control service. Implement required
messages on DropObjects RPC request and response messages. Implement
`DropObjects` method on Control service server of the node. Use
`StorageEngine.Delete` method as a deleted object handler on server.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There is a need to define storage node's interface to remove objects from
the local storage.
Define `DropObjects` RPC in `ControlService`. Define `DropObjectsRequest` /
`DropObjectsResponse` structure of the request / response messages.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement `NetworkInfo` calls on full stack of Netmap services. Current
epoch is read from node local state, magic number is read via `MagicNumber`
call of morph client.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement `Client.MagicNumber` method that returns magic number of the
network to which the underlying RPC node client is connected.
Network magic value is received via `GetNetwork` method.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
According to nspcc-dev/neofs-api#136 tombstone body should store the same
attribute as in object header. If they are different, then check is failed
with `errTombstoneExpiration`.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Creating tombstones for tombstones is prohibited in NeoFS system. Metabase
graveyard contains records of the form {address: address}: key is an address
of inhumed object, value is an address of the tombstone. To prevent creation
tombstones for tombstones metabase must control incoming Inhume calls:
* if Inhume target is a tombstone, then "grave" should not be added;
* if {a1:a2} "grave" was created earlier and {a2: a3} "grave" came later,
then first "grave" must be removed as tomb-on-tomb.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Change Shard's garbage remover to interrupt iterating over the metabase
graveyard when the buffer is full to the max size (`WithRemoverBatchSize`
Shard's option).
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make `DB.IterateOverGraveyard` to immediately return nil if GraveHandler
returns ErrInterruptIterator.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make object delete service to use network information to calculate and set
expiration of the created tombstone.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Add new epoch event handler to GC that finds all expired tombstones and
marks them and underlying objects to be removed. Shard uses callbacks
provided by the storage engine to mark underlying objects.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement `DB.IterateCoveredByTombstones` method that iterates over graves
and handles all objects under one of the tombstones.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Add new epoch event handler to GC that finds all expired non-tombstone
objects and marks them to be removed.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement `DB.IterateExpired` method that iterates over the objects in
metabase that are expired at particular epoch.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Group handlers of the particular event to a WaitGroup and wait for it before
the next event handling. This will ensure that all handlers complete and
prevent potential conflicts between past and present jobs.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
`Shard.Init` method creates a new GC instance from shard configuration and
starts GC's workers through `init` call. In initial implementation GC
routines are indefinite and can be killed only with by application shutdown.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Shard's GC component consists of:
* asynchronous remover that periodically wake up and removes all garbage
objects from the shard, and goes to sleep for particular time interval;
* external event listener that distributes jobs between workers;
* group of workers that can handle a single job related to particular
external event.
Remover and event listener represents go-routines which are started by
`init` method (calls from `Shard.Init`). In initial version all event
handlers are interrupted: this means that next event of the same type will
interrupt previous handling and start the new one.
GC is fully encapsulated in Shard. All GC configurations are reflected in
Shard's configuration.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement `DB.IterateOverGraveyard` method that iterates over all graves and
passes passes their descriptors (new type `Grave`) to handler (new type
`GraveHandler`). `Grave` currently have buried object address and garbage
flag.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Replace single target address in `InhumePrm` with the list of addresses.
Change corresponding parameter in `WithTarget` and `MarkAsGarbage` methods
to variadic.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Replace single target address in `InhumePrm` with the list of addresses.
Rename `WithAddress` method to `WithAddresses` and change parameter to
variadic.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make `StorageEngine.Delete` to execute `Inhume` operation with
`MarkAsGarbage` parameter on the `Shard` that holds the object. Searching of
the particular shard is performed through iterating over HRW-sorted shards.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement `InhumePrm.MarkAsGarbage` method that leads to marking object as
garbage in metabase. Update `InhumePrm.WithTarget` doc indicating a conflict
with the new method.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement `InhumePrm.WithGCMark` method that marks the object as garbage in
graveyard. Update `InhumePrm.WithTombstoneAddress` doc indicating a conflict
with the new method. Update `Inhume` function doc about tombstone address
parameter.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Delete operation of Metabase is performed on group of objects. The set being
removed can contain descendants of a common parent. In the case when all
descendants of a parent object are deleted, it must also be deleted from
the metabase. In the previous implementation, this was not done due to the
chosen approach to counting references to the parent.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
The lifetime of an object can be limited by specifying a correspondin
well-known attribute. Node should refuse to save expired objects.
Checking objects in FormatValidator is extended with an expiration attribute
parsing step.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation StorageEngine.Inhume operation forced Shard
.Inhume call on all internal shards. There is a need to inhume object in a
single shard. To achieve this, Inhume operation is performed in next steps:
1. iterate over sorted shards, check object presence through Exists call;
2. if object exists at any shard in step 1 => inhume it and return on
success;
3. if no shards contain the object => iterate over sorted shards again and
try to inhume the object at first possible shard;
4. if all Inhume calls are failed => return an error.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
All node info attribute transformations can't guarantee
the order of attributes. However it should be consistent
otherwise smart-contract won't be able to collect signatures
and approve transaction.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Node info validator may change node attributes, e.g. update
it with human-readable location attributes based on LOCODE.
So inner ring node should provide new node info binary to
smart contract.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Scanning subdivision csv-table entries one-by-one takes significant time and
system resources. To speed up random access to table records, on the first
call, the table is pumped into memory (map). On subsequent calls, I/O
operations are not performed.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Scanning csv-table entries one-by-one takes significant time and system
resources. To speed up random access to table records, on the first call,
the table is pumped into memory (map). On subsequent calls, I/O operations
are not performed.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Inner ring Server does not modify LOCODE database (Put method), thus it is
better to open it in RO mode.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Add ReadOnly function that returns Option that enables read-only mode in DB.
RO mode can be used by processes that won't modify the DB in order to not
acquire write flock.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Set timeout option of BoltDB Open operation to 3s in order to prevent
indefinite waiting for file lock.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement DB interface required by LOCODE validator on new wrapper over the
LOCODE Bolt DB (Record on new wrapper over LOCODE Bolt DB entries).
Construct LOCODE validator and pass it to Netmap processor's constructor as
NodeValidator parameter.
Thus, candidates for a network map must set LOCODE attribute for which there
is an entry in the NeoFS location database.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Keep list of functions which are called first when the server starts (method
Server.Start). If any of the starters returns an error, the server will not
start. Such starters will mainly be used for resources that need to be
initialized after a successful server construction, but before its main work
(e.g. local files).
Keep list of functions which are called when the server stops (Server.Stop
method). Such closers will mainly be used for resources that need to be
released after server shutdown (e.g. initialized by starters).
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Define a structure for dealing with the geographic location of nodes.
Implement VerifyAndUpdate (with the same purpose as NodeValidator interface)
that checks LOCODE attribute and fills other attributes of the location.
Technically the entity is a wrapper over the NeoFS location database: it
maps the node LOCODE to the database record from which the new attributes
are generated.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Define NodeValidator interface of the entity that checks and finalizes
NodeInfo structure. Add NodeValidator to Netmap processor. Pass NodeInfo
structures of network map candidates to NodeValidator in order to verify it
and prepare to final state required by network.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Define NeoFS location database based on BoltDB. Implement methods to save
the record by key (Put) and to read the record by key (Get).
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Define database of Earth's polygons in GeoJSON format. Implement resolving
of geo point to continent in which it is located through point-in-polygon
calculation.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement airport database based on csv OpenFlights table. Implement
UN/LOCODE entry matcher. Implement country namespace.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Define structure of keys and records of the location database. Define the
interfaces of all components necessary for the formation of the database.
Implement the function of filling the database.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Define the data types needed to work with LOCODE's in NeoFS (country code,
location code, coordinates). Implement string parsers for new types.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Check if `new(big.Int)` will be efficient later and replace
all `big.NewInt()` in code or leave it as it is.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
TxTable used twice in context to transfer assets to
and from banking account. There is no need to store
instance of table persistently.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Some transfers from container owners into bank account may
fail due to lack of assets, so we have to deal with remaining
amount of assets in banking account.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Add SignWithRFC6979 option to signature verification function since eACL
table are signed by users with this option.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Since the contract started returning the table signature, it became
necessary to check its correctness.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Basic settlement context is a main structure that
implement logic of basic settlement phases: collecting
assets from container owners and then distributing them
to storage nodes.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Implement route Builder interface on wrapper over the container placement
builder, Component implies exactly one transfer to each of the most weight
nodes of the container (according to some weighing algorithm).
Implementation is planned for use when transferring local estimates of
storage nodes.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement a component for transmitting the value of the used container space
along a route defined in the system. Implement WriterProvider interface on
it. By implementation, it is the link between the route planner and the
point-to-point transmitter, and abstracts from the implementation of both of
them. In the future, this implementation will be used as a transmitter of
local estimates of storage nodes among themselves.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement API methods of the Container contracts client corresponding
to the calls of the contract for storing the used space of the container
("putContainerSize", "getContainerSize", "listContainerSizes"). Extend
the wrapper over the client with methods abstracted from sidechen calls.
In particular, the method of storing the value will be used to record
the estimates of the used space of containers calculated by the network
participants.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement functions to wrap Writer or Iterator. The resulting wrapper
provides WriterProvider or IteratorProvider interface respectively.
Such a wrapper can be used as a single storage instance provider
regardless of context.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement a component that stores the values of the used space of
containers. The storage allows you to write several values for a fixed
container and epoch number, and read the averaged estimates of all
accumulated values. All values are stored in memory. This component is
planned to be used as an accumulator of opinions from various network
participants about the fullness of the container.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement a component that connects the value stores of the used space of
containers. Implement the Start/Stop operations on it, which will later
become the application handlers of the corresponding events from the
sidechain. The main task of the controller is to temporarily synchronize the
stages of calculating the global estimate of the used space in the
container. The details of the score calculation (the way of collecting /
transmitting local scores, the final score formula and writing to the
contract) are encapsulated in the dependency components, the controller is
abstracted from them.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There are two notifications:
- start estimation notification produced at the beginning of the
epoch,
- stop estimation notifications should be produced before
basic audit settlement starts.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
This small refactoring adds `blocktimer.go` file with
all timer related function and constructors. This way
we can create all timers in one place (at the end of
innerring.Server constructor).
To do that we had to move timer reset into global
server state so it can be accessed by netmap
processor.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
There is no point of making separate `Fee` and `NoFee`
wrappers because all reading operations are free disregarding
of fee value in static client. However we can use these same
wrappers so send transaction.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Pass handler of audit settlement event to netmap event processor. Generate
AuditEvent in during new epoch processing.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Define a processor of events related to monetary transactions. Define
audit-related event. Provide an interface for processing the audit payout
event.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Use client with extraFee instead of readOnlyFee. Rename
NewNoFeeBalanceClient to NewBalanceClient since no-fee client is no longer
used.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Do not pass zero transfers from the calculation table to Exchanger. Revert
transfers with negative amount since Exchanger interface requires positive
amounts of funds.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Move control of the minimum cost of payment for the audit from the
implementation of the Exchanger to the place where the amount is calculated.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Calculate payments to storage nodes for the passed audit when changing the
epoch. The calculation results are wrapped in a call to the Balance contract
(one transaction per user-to-user transfer).
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement component that analyzes audit results and generates transactions
for payment of awards for successfully passed audit. When calculating the
total fee, the declared price of the node (attribute) and the total volume
of storage groups, which were successfully audited by the container, are
taken into account. In one call the calculator processes all audit results
for the previous epoch (relative to the calculated parameter).
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation handler was not called more the one time after
Reset. It was caused by tick counter not being reset inside Reset method.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Container listing already supported in the metabase for `engine.List`
operation. To get container statistics engine should provide both the
option to get container volume estimation and list of all containers.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Objects of one container can be split among shards, so engine
should iterate over all available shards to sum all size
estimations.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Storage nodes keep container size estimation so they
can announce this info and hope for some basic income
settlements. This is also useful for monitoring.
Container size does not include non regular or inhumed
object sizes.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Listen to new blocks from mainnet until the required fix in neo-go lib is
released (https://github.com/nspcc-dev/neo-go/pull/1687).
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Replace WSClient.Init call from the body of BlockNotifications method to
constructor New since Init should be called before working with client
according to neo-go docs.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Write error returned by BlockNotifications() call ins listenLoop method body
to error channel only if it is procided. Otherwise, write debug log message.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Replace block channel's initialization from BlockNotifications method body
to Subscriber's constructor in order to prevent potential writing to nil
channel.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Call handler of the fractional block interval once between base interval
ticks by default. Add option to call handler of fractional block interval
multiple times (N times if fractional interval == BASE_INTERVAL / N).
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Extend Listener with RegisterBlockHandler method. All block handlers are
called on each block read from Subscriber.BlockNotifications channel.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Call SubscribeForNewBlocks in Subscriber's constructor. Provide
BlockNotifications interface method that returns block channel. Write new
blocks to the channel on notification events with BlockEventID type.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Classifier looks at list of inner ring nodes and container
nodes from current and previous epoch to classify request.
Sometimes these checks might return error.
Consider there is a request from unknown key and container's
placement policy valid for current epoch and invalid for past
epoch. Classifier tries to find if key belongs to container
node from current epoch -- it is not. Then it tries to find if
key belongs to container node from past epoch and it throws
error, because placement policy is invalid for past epoch.
This is a legit case and classifier should ignore such errors
to provide best effort in matching. The only error classifier
should return is an error when request does not contain
public key to classify it.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Pivot used to shuffle nodes in the CRUSH tree. This is
required argument. We use container ID value to select
container nodes, so `nil` value produces incorrect placements.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Replace static NodeInfo structure with NodeState interface that provides
method to read node information in runtime.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There is a codecov issue because objects are not placed
in the engine the same way every unit test. Therefore
sometimes there are more coverage, sometimes there are
less. Seeded RNG should solve this issue for engine tests.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Netmap snapshot table caches bootstrap `AddPeer` txs so inner ring
node does not produce redundant approval txs for bootstrapped nodes.
However if node updates states to `Offline`, then such node should
be flagged in snapshot table, so re-bootstrap will actually produce
approval tx.
`ev.PublicKey.String()` returns uncompressed representation of the
node's public key, while snapshot contains compressed values.
Therefore the node was not flagged and re-bootstrap tx was not
approved by inner ring nodes.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Add HealthStatus method to HealthChecker interface that should return
current health status of the node application.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement methods required for signatures. Receive network map from netmap
storage, convert it to Control service message and return in response.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Add NetmapSnapshot rpc to ControlService protobuf definition. Recompile
proto files. Add required method to server structure.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Support processing of NetmapEpoch and NetmapLookupDepth X-headers when
processing object read operations. Placement for operations
Get/Head/GetRange/GetRangeHash/Search is built for the epoch specified in
NetmapEpoch X-header (by default latest). Also the specified operations are
processed until success is achieved for network maps from the past up to
NetmapLookupDepth value. Behavior for default values (zero or missing) left
unchanged.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Add binary salt field to RangeHashPrm struct. Implement field setter. Set
salt from the request in v2 service.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
We can't use enum values from SDK library directly, they can be
different from API specification. Therefore we need to convert them
into protocol level format.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
In previous implementation of eACL service v2 the response X-headers were
validated at the stage of re-checking eACL. This provoked a mismatch of
records in the eACL table with requests. Fix this behavior by checking the
headers from the request, not the response.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Forward request X-headers to client calls during internal processing of
Object operations on the node.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Since PoR audit check uses object.Head with large TTL values to
make real proof of retrievability, we may use random remote
nodes.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Audit task manager should not discard tasks if all workers are
busy, therefore pools should not be non-blocking.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
PDP audit check is not quite working with very small objects, so
we try to build coverage with bigger objects.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
This function converts 2-dimension array of container nodes
into single dimension array. Useful when we need to iterate
over whole container.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Add numeric return from TaskManager.Reset method that shows the number of
canceled tasks. This values will be used for assessment of the progress of
the audit.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Define interface of the container communicator which methods are going to be
used in audit checks. Make innerring Server to implement this interface.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement Reset method on audit task manager that cleans task queue.
Extended TaskManager interface with Reset method on IR side. Call Reset
method in audit processor before new audit start.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation parent object header finalized twice in size
limiter + formatter. On the one hand, this added redundant action, on the
other hand, it could provoke a difference in the headers of the linking and
the last part. Change formatter to finalize parent header if it does not
container the signature. Change size limiter to reuse parent header after
last child finalization in linking child.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation DB.Containers method could return an error about
invalid container ID string format. This could happen if some of top-level
buckets had name w/o "_" substring.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation eACL validator didn't take into account container
and object ID fields of request bodies.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Every unknown error must not decrease shortage counter and must not
exclude faulty node from the node list, because this list will be used
later for replication.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Deadlock occurs when `getActivate` function opens new blobovnicza and that
invokes evict in LRU cache of open blobovniczas. `getActivate` makes
`activeMtx.Lock()` and then cache evict makes `activeMtx.RLock()` and deadlock
happens.
Fix contains two steps:
- add separate mutex to open blobovniczas (1),
- split single Lock outside of `updateAndGet` (2).
As for the (1) `bbolt.Open()` locks when it tries to open the same file from
two threads. So separate mutex will prevent that.
As for the (2) `updateAndGet` function contains from two parts. At first it
checks if required blobovnicza is ready and it returns it. In this case we can
use the simple RLock. But then there is an option when we should open new
blobovnicza and update map of active blobovniczas.
In this case we call `openBlobovnicza` without activeMtx lock. Cache evict
happens there and it won't cause deadlock.
Then we lock activeMtx to update the map of active blobovniczas. Concurrency can
happen there. However `openBlobovnicza` will not open the same blobovnicza twice,
so we can make one more check if opened blobovnicza was activated while thread was
locked in activeMtx. If so, then return active blobovnicza, else finish activation.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
In previous implementation Blobovnicza could incorrectly initialize
dimensional buckets: if SmallSizeLimit = 2 ^ X + Y && Y < 2 ^ X, then
largest dimensional bucket was [2 ^ (X - 1) : 2 ^ X]. This was caused by an
incorrect condition for stopping the iterator along the dimensional
boundaries.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
All parameters and resulting values of all metabase operations are
structured in new types. The most popular scenarios for using operations are
moved to auxiliary functions.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
With the update of the local storage engine, the headers of virtual objects
are directly given. In this regard, the step with obtaining the the right
child header is removed.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation Blobovnicza's stored objects in protocol format
which did not allow working with externally compressed objects. To achieve
this goal, operations Get and Put no longer work with the structure of the
object, but only with abstract binary data. Operation GetRange has become
incorrect in its original purpose to receive the payload range. In this
regard, BlobStor receives the payload range of the object through Get
operation. In the future either Blobovnicza will learn to compress objects
by itself, or the GetRange operation will be eliminated.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Blobovnicza returns object, so we can't put compressed
data there. Compressed data won't be deserialized correctly.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Replace ErrNotFound and ErrRangeOutOfBounds to core/object package in order
to share them across the libraries.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Add blobovnicza instance to BlobStor structure. Create blobovnicza tree in
BlobStor constructor. Implement Open/Init/Close methods.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There is a need to support single blobovnicza in blobovnicza tree. This can
be achieved with a width of 1, and a depth of 0 or 1. With depth = 1 one
redundant directory is created, inside which there is a blobovnicza. If the
depth is zero, the blobobnivza will be in the root path. Fix negative
capacity in iterateDeepest method with zero depth.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
With exist check we should index parent first, because
as soon as child will be added to metabase, exist on
parent will return true even if it was not indexed yet.
Also this commit makes one db.Update instead of two for
parent and child.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Place the root of blobovnicza tree in a subdirectory of BlobStor with same
permissions. Abolish WithBlobovniczaRootPath and WithBlobovniczaPersmissions
options.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Blobovnicza ID parameter provides the ability to specify particular
blobovnicza to delete object from. In this case only specified blobovnicza
is processed.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation objects were classified by size according to
payload size. From now they are classified by the size of their binary
representation.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement "big or small" property classifier (only the size of the payload
is temporarily considered). Save "big" objects in shallow dir. Save "small"
objects in shallow dir until the moment of implementation of blobovnicza.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement Put/Get/GetRange/Select/SelectAll functions over storage
engine. These functions are going to be used by Object service.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation Shard accessed the BlobStor to get the
object header. However, the shard must take headers from the metabase.
From now zero length of the requested payload range seens as object
header request. In this case shard calls metabase to get the header.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation WithCompressObjects returned Option
than could panic if zstd (de)compressor creation failed with error.
From now errors with (de)compressor creation result in an option
without using data compression. In this case, the error is written
to the log passed to the option constructor.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation each operation on local storage
locked engine mutex. This was done under the assumption that
the weights of the shards change as a result of write operations.
With the transition to static weights of shards, it is no longer
necessary to lock the global mutex during the execution of operations.
However, since the set of engine shards is dynamic, there is still a
need to control multiple access to this set. The same mutex is used
for synchronization.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation each shard operation locked
RW shard mutex. With this approach RW operations were executed
one-by-one and blocked the execution of RO operations.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Correct the calculation of maximum value of fs tree depth. Fix check
of the max depth overflow in WithShallowDepth function.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
GetPrm has WithPayloadRange option to specify the requested
payload range. In previous implementation StorageEngine.Get
method ignored this option. From now zero length matches
full payload request.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Now alphabet contracts use signature collection to make
a vote. All inner ring nodes votes for some list of validators
the same way as they vote fore new epoch or new container.
As soon as list is accepted by alphabet contracts, each of them
votes for one candidate from the list.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
With this argument neofs-ir will be run as an CLI
application that initialize inner ring server, invokes
`vote` method on corresponding alphabet contract and
exits.
User can provide a comma-separated list of validator
public keys.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
This function calculates validator key based on inner ring index
and invokes `Vote` method of corresponding alphabet contract.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
In previous implementation linking object inherited only ID of the parent
object. From now it inherits full header like last child.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation child objects inherited parent attributes after
split-transformation, which was redundant. From now attributes are not
inherited.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation placement traverser processed incorrectly with
local placement build. Also entity incorrectly traversed the placement
vectors for fixed number read operations until success. The erroneous
behavior was due to the use of a vector number of successes instead of
a scalar number in these scenarios.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
With updated specification of object related operation
we don't have this search attribute any more and we
should not use functions related to this attribute.
This commit breaks object service logic, however it will
be fixed later.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
ErrEACLNotFound error was defined in implementation package. EACL validator
checked this error after the call of eACL storage interface method. Replace
ErrEACLNotFound to core container library. in order to: on the one hand not
use an implementation error, on the other hand, to be able to reuse a
generic type error (404).
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Now morph library returns error if there is not eACL in
sidechain storage. However in this case eACL check should
be passed since it is the same as having empty eACL table.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Sticky bit checks if object owner and request owner are the
same. Container owner should not used in this check.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
`owner` field may be misused as request sender owner, however
it is a owner of a container for that request. New naming
should be clear.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
With this package we can reuse already created connections.
Later on neofs-api-go will support checking connection health
and `Close` operation, so this cache could run worker and remove
unhealthy clients.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Now root and phy (leaf) filters work like flags. They work with
any matcher and any value. So meta-storage sets `true` value for
all root and phy objects and puts them into separate bucket.
We also do not work with inversion anymore, so it either added
to the bucket or not. We don't need to store both options.
This is the reason `selectAll` function is changed a bit. Now
it performs some low-level parsing from primary bucket and root
bucket.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Keyer prints information about private key, public key,
NEO3 Wallet, scripthash. It can generate new private key
or generate multisig address.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Revert commit 0faa40e4 to increase the disk space consumed by the
metabase in favor of the speed of index updates.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In the previous implementation of the metabase, it was necessary to write
virtual objects to the primary index to be able to select them. In this
approach, virtual objects can be obtained directly using Head operation.
This has a side effect in handling object operations that do not expect to
receive a virtual object header in a single operation. With recent changes,
it is no longer necessary to have records of virtual objects in the primary
index, so this no longer happens for system integrity.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Define ErrRelationNotFound error in searchsvc package. Return
ErrRelationNotFound from RelationSearcher.SearchRelation method if search
result is empty.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Refactored pkg/netmap package provides JSON converters for
NodeInfo and PlacementPolicy structures, that has been used
by client applications.
It also updates Node structure itself so it is a part of
grpc <-> v2 <-> pkg conversion chain.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
NeoFS contract produces event with three arguments:
- update ID,
- config key,
- config value.
Update ID is a unique shared by inner ring holders
byte sequence that is used to update NeoFS runtime
configuration.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Fix a bug in the selection when removed object that matches search query
provoked the return of an empty result.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Fix a bug in the selection when an object could be added to the result after
a mismatch in the previous filter.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In the previous implementation of the metabase, the unique value of the
header was assigned a bucket, the elements of which were leaves with a
key-address and an empty value. This approach was relatively efficient in
terms of write speed. However, a large number of buckets led to a rapid
increase in the database volume (~4GB for 100K objects with unique
attributes). An approach is presented with storing indexes on the value of
headers in the leaves of the tree, where the keys are the unique values of
the header, and the values are a serialized list of addresses (gob
encoding is temporarily used for serialization).
The new approach gave a good result in saving space (~350MB), however, it
significantly reduced the write speed with an increase in the number of
objects (~ 80x after 100K objects).
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
The previous metabase implementation took an exclusionary approach: filters
narrowed the set of all objects to those that match all filters. An
inclusive approach is presented. In it, when traversing the indexed headers,
the object becomes a candidate for selection. If at least one of the
subsequent filters is not passed, the object ceases to be a candidate. At
the end of the traversal, the remaining candidates are added to the
resulting sample. The borderline case of no filters is handled in a special
way: all stored objects are added to the resulting selection.
Presented inclusive approach showed better performance in most scenarios
(although not all).
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous metabase implementation the absence of an attribute presented in
the search filter did not exclude the object from the result. Change this
behavior to exclude the object from the result.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Replace meta Bucket with meta.DB instance in local storage implementation.
Adopt all dependent components to new local storage.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Process parent objects in Put method. Headers of parent object are stored as
regular leaf objects in metabase from now. Build indexes for ROOT, LEAF and
CHILDFREE properties.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Call CheckFormat function in container.Put handler for conducting initial
checks of the structure that are not performed by the smart contract.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
With neo-project/neo-modules#358 nodes support RPC to
return used magic number. Therefore client doesn't need
that configuration value any more.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Neo-go does not use smartcontract.Parameter to return values
anymore, so it's convertes partly removed from neofs-node.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
There is an optimization to send ApprovePeer tx only in
case if `touch` returns false. It returns false if node
is not in the cache or it was flagged to removal.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
This event will be produced by new epoch handler. All
cleanups should be synchronous because smart contract can't
store inner ring votes forever. Therefore voting should be done
in similar time interval for all inner ring nodes.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Cleanup table is a cache for inner ring node to look for netmap
snapshot. It updates access time of bootstrapped nodes and will
be used to send `updateState` txs to clean netmap from unresponsive
nodes.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Implement Delete method on DB structure that adds deleted addresses to
tombstone index. Do not attach addresses from tombstone index to Select
result. Return error from Get method if address is presented in tombstone
index.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement bolt-based metabase that is going to be used in local object
storage. Implement Put/Get/Select methods.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make Policer to call AddTask method of Replicator when an insufficient
number of copies of an object is detected in the container.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Implement Replicator service that performs background work to replicate
local object to remote nodes in the container. Replicator is going to be
used by Policer.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
