- Change driver interface to take a context as its first argument
- Make newFileReader take a context as its first argument
- Make newFileWriter take a context as its first argument
- Make blobstore exists and delete take a context as a first argument
- Pass the layerreader's context to the storage layer
- Pass the app's context to purgeuploads
- Store the app's context into the blobstore (was previously null)
- Pass the trace'd context to the storage drivers
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
According to the Apache mod_proxy docs, X-Forwarded-Host can be a
comma-separated list of hosts, to which each proxy appends the requested
host. We want to grab only the first from this comma-separated list
to get the original requested Host when building URLs.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
This adds a missing return statement. It is not strictly needed since if the
io.Copy fails, the Finish operation will fail. Currently, the client reports
both errors where this new code will correctly only report the io.Copy error.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
The code using values from the yaml package wasn't careful enought with the
possible incoming types. Turns out, it is just an int but we've made this
section somewhat bulletproof in case that package changes the behavior.
This code likely never worked. The configuration system should be decoupled
from the object instantiation.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Rather than accept the resulting of a layer validation, we retry up to three
times, backing off 100ms after each try. The thought is that we allow s3 files
to make their way into the correct location increasing the liklihood the
verification can proceed, if possible.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
When the registry starts a background timer will periodically
scan the upload directories on the file system every 24 hours
and delete any files older than 1 week. An initial jitter
intends to avoid contention on the filesystem where multiple
registries with the same storage driver are started
simultaneously.
Ensure that the status is logged in the context by instantiating before the
request is routed to handlers. While this requires some level of hacking to
acheive, the result is that the context value of "http.request.status" is as
accurate as possible for each request.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Registry is intended to be used as a repository service than an abstract collection of repositories. Namespace better describes a collection of repositories retrievable by name.
The registry service serves any repository in the global scope.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
This moves the instance id out of the app so that it is associated with an
instantiation of the runtime. The instance id is stored on the background
context. This allows allow contexts using the main background context to
include an instance id for log messages. It also simplifies the application
slightly.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
The original implementation wrote to different locations in a shared slice.
While this is theoretically okay, we end up thrashing the cpu cache since
multiple slice members may be on the same cache line. So, even though each
thread has its own memory location, there may be contention over the cache
line. This changes the code to aggregate to a slice in a single goroutine.
In reality, this change likely won't have any performance impact. The theory
proposed above hasn't really even been tested. Either way, we can consider it
and possibly go forward.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Rather than enforce lowercase paths for all drivers, support for
case-sensitivity has been deferred to the driver. There are a few caveats to
this approach:
1. There are possible security implications for tags that only differ in their
case. For instance, a tag "A" may be equivalent to tag "a" on certain file
system backends.
2. All system paths should not use case-sensitive identifiers where possible.
This might be problematic in a blob store that uses case-sensitive ids. For
now, since digest hex ids are all case-insensitive, this will not be an issue.
The recommend workaround is to not run the registry on a case-insensitive
filesystem driver in security sensitive applications.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
To avoid compounded round trips leading to slow retrieval of manifests with a
large number of signatures, the fetch of signatures has been parallelized. This
simply spawns a goroutine for each path, coordinated with a sync.WaitGroup.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
For consistency with other systems, the redis and caching monitoring data has
been moved under the "registry" section in expvar. This ensures the entire
registry state is kept to a single section.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This allows one to better control the usage of the cache and turn it off
completely. The storage configuration module was modified to allow parameters
to be passed to just the storage implementation, rather than to the driver.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This changeset integrates the layer info cache with the registry webapp and
storage backend. The main benefit is to cache immutable layer meta data,
reducing backend roundtrips. The cache can be configured to use either redis or
an inmemory cache.
This provides massive performance benefits for HEAD http checks on layer blobs
and manifest verification.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This changeset defines the interface for layer info caches. Layer info caches
speed up access to layer meta data accessed in storage driver backends. The
two main operations are tests for repository membership and resolving path and
size information for backend blobs.
Two implementations are available. The main implementation leverages redis to
store layer info. An alternative implementation simply caches layer info in
maps, which should speed up resolution for less sophisticated implementations.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
By using a resumable digester and storing the state of upload digests between
subsequent upload chunks, finalizing an upload no longer requires reading back
all of the uploaded data to verify the client's expected digest.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
This chnage prevents a crash when moving from a non-existent directory that has
a file as a parent. To prevent this, we simply check that the node is a
directory and throws an error if it is not.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This change adds strong validation for the uuid variable for v2 routes. This is
a minor specification change but is okay since the uuid field is controlled by
the server. The character set is restricted to avoid path traversal, allowing
for alphanumeric values and urlsafe base64 encoding.
This change has no effect on client implementations.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Redis has been integrated with the web application for use with various
services. The configuraiton exposes connection details, timeouts and pool
parameters. Documentation has been updated accordingly.
A few convenience methods have been added to the context package to get loggers
with certain fields, exposing some missing functionality from logrus.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This enables Azure storage driver to be used with non-default
cloud endpoints like Azure China or Azure Government that does
not use `.blob.core.windows.net` FQDN suffix.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
Convert middleware in the config to be a map of type->[]Middleware
Add support for registry & repository middleware.
Some naming updates as well.
Signed-off-by: Andy Goldstein <agoldste@redhat.com>
middleware concept.
This also breaks the dependency the storage package had on goamz
Signed-off-by: David Lawrence <david.lawrence@docker.com> (github: endophage)
This changeset implements immutable manifest references via the HTTP API. Most
of the changes follow from modifications to ManifestService. Once updates were
made across the repo to implement these changes, the http handlers were change
accordingly. The new methods on ManifestService will be broken out into a
tagging service in a later PR.
Unfortunately, due to complexities around managing the manifest tag index in an
eventually consistent manner, direct deletes of manifests have been disabled.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Manifests are now fetched by a field called "reference", which may be a tag or
a digest. When using digests to reference a manifest, the data is immutable.
The routes and specification have been updated to allow this.
There are a few caveats to this approach:
1. It may be problematic to rely on data format to differentiate between a tag
and a digest. Currently, they are disjoint but there may modifications on
either side that break this guarantee.
2. The caching characteristics of returned content are very different for
digest versus tag-based references. Digest urls can be cached forever while tag
urls cannot.
Both of these are minimal caveats that we can live with in the future.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Add a SignatureService and expose it via Signatures() on Repository so
external integrations wrapping the registry can access signatures.
Move signature related code from revisionstore.go to signaturestore.go.
Signed-off-by: Andy Goldstein <agoldste@redhat.com>
benchmarks added to filewriter_test, demonstrate buffered
version is ~5x faster on my hardware.
Signed-off-by: David Lawrence <david.lawrence@docker.com> (github: endophage)
This changeset adds support for a header to identify docker upload uuids. This
id can be used as a key to manage local state for resumable uploads. The goal
is remove the necessity for a client to parse the url to get an upload uuid.
The restrictions for clients to use the location header are still strongly in
place.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
The method (Registry).Repository may now return an error. This is too allow
certain implementationt to validate the name or opt to not return a repository
under certain conditions.
In conjunction with this change, error declarations have been moved into a
single file in the distribution package. Several error declarations that had
remained in the storage package have been moved into distribution, as well. The
declarations for Layer and LayerUpload have also been moved into the main
registry file, as a result.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Since the notifications package is now decoupled from storage, we are moving it
to the root package.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
A Layer or LayerUpload should not be coupled with the containing repository.
Remove the Name method and correctly reference from the repository where
appropriate.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
After consideration, it has been decided that the interfaces defined in the
storage package provide a good base for interacting with various registry
instances. Whether interacting with a remote API or a local, on-disk registry,
these types have proved flexible. By moving them here, they can become the
central components of interacting with distribution components.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
After all of the perl refactoring, some import orderings were left asunder.
This commit corrects that.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This change is slightly more complex than previous package maves in that the
package name changed. To address this, we simply always reference the package
driver as storagedriver to avoid compatbility issues with existing code. While
unfortunate, this can be cleaned up over time.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
The goal is to free up the distribution/registry package to include common
registry types. This moves the webapp definitions out of the way to allow for
this change in the future.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
The branch that executes after a failed request authorization due to a missing
repo name now correctly returns an error. This is somewhat superficial since
the response would have already been executed. Although, unintended repository
operations may have occurred.
Documentations and comments have also been updated to be in line with
surrounding changes.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This changeset integrates context with the storage package. Debug messages have
been added to exported methods. Existing log messages will now include
contextual details through logger fields to aid in debugging. This integration
focuses on logging and may be followed up with a metric-oriented change in the
future.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This changeset integrates contextual logging into the registry web application.
Idiomatic context use is attempted within the current webapp layout. The
functionality is centered around making lifecycle objects (application and
request context) into contexts themselves. Relevant data has been moved into
the context where appropriate. We still have some work to do to factor out the
registry.Context object and the dispatching functionality to remove some
awkward portions.
The api tests were slightly refactored to use a test environment to eliminate
common code.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
The auth package has been updated to use "golang.org/x/net/context" for
passing information between the application and the auth backend.
AccessControllers should now set a "auth.user" context value to a AuthUser
struct containing a single "Name" field for now with possible, optional, values
in the future.
The "silly" auth backend always sets the name to "silly", while the "token" auth
backend will set the name to match the "subject" claim of the JWT.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
To clarify the role of actor, the request data that initiates an event has been
separated. The ActorRecord is pared down to just the username. This eliminates
confusion about where event related data should be added.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Endpoints are now created at applications startup time, using notification
configuration. The instances are then added to a Broadcaster instance, which
becomes the main event sink for the application. At request time, an event
bridge is configured to listen to repository method calls. The actor and source
of the eventBridge are created from the requeest context and application,
respectively. The result is notifications are dispatched with calls to the
context's Repository instance and are queued to each endpoint via the
broadcaster.
This commit also adds the concept of a RequestID and App.InstanceID. The
request id uniquely identifies each request and the InstanceID uniquely
identifies a run of the registry. These identifiers can be used in the future
to correlate log messages with generated events to support rich debugging.
The fields of the app were slightly reorganized for clarity and a few horrid
util functions have been removed.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Several API tests were added to ensure correct acceptance of zero-size and
empty tar files. This led to several changes in the storage backend around the
guarantees of remote file reading, which backs the layer and layer upload type.
In support of these changes, zero-length and empty checks have been added to
the digest package. These provide a sanity check against upstream tarsum
changes. The fileReader has been modified to be more robust when reading and
seeking on zero-length or non-existent files. The file no longer needs to exist
for the reader to be created. Seeks can now move beyond the end of the file,
causing reads to issue an io.EOF. This eliminates errors during certain race
conditions for reading files which should be detected by stat calls. As a part
of this, a few error types were factored out and the read buffer size was
increased to something more reasonable.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This changeset addresses intermittent internal server errors encountered during
pushes. The root cause has been isolated to layers that result in identical,
empty filesystems but may have some path declarations (imaginge "./"),
resulting in different tarsums. The main error message reported during these
upload problems was a 500 error, which was not correct. Further investigation
showed the errors to be rooted in digest verification when finishing uploads.
Inspection of the surrounding code also identified a few issues. PutLayerChunk
was slightly refactered into PutLayerUploadComplete. Helper methods were
avoided to make handler less confusing. This simplification leveraged an
earlier change in the spec that moved non-complete chunk uploads to the PATCH
method. Simple logging was also added in the unknown error case that should
help to avoid mysterious 500 errors in the future.
At the same time, the glaring omission of a proper layer upload cancel method
was rectified. This has been added in this change so it is not missed in the
future.
In the future, we may want to refactor the handler code to be more
straightforward, hopefully letting us avoid these problems in the future.
Added test cases that reproduce these errors and drove these changes include
the following:
1. Push a layer with an empty body results in invalid blob upload.
2. Push a layer with a different tarsum (in this case, empty tar)
3. Deleting a layer upload works.
4. Getting status on a deleted layer upload returns 404.
Common functionality was grouped into shared functions to remove repitition.
The API tests will still require future love.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Setting a header for all responses can help clients better determine
if the server speaks the legacy v1 API or the v2 API. It is important
that the header be set *BEFORE* routing the request.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Because we guarded the error check, nil Upload on the handler was getting
through to unexpected branches. This directly handles the missing upload
ensuring its set as expected.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Most of this change follows from the modifications to the storage api. The
driving factor is the separation of layerUploadState from the storage backend,
leaving it to the web application to store and update it. As part of the
updates to meet changes in the storage api, support for the size parameter has
been completely removed.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This refactors the hmac state token to take control of the layerUploadState
json message, which has been removed from the storage backend. It also moves
away from the concept of a LayerUploadStateStore callback object, which was
short-lived. This allows for upload offset to be managed by the web application
logic in the face of an inconsistent backend. By controlling the upload offset
externally, we reduce the possibility of misreporting upload state to a client.
We may still want to modify the way this works after getting production
experience.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Since the repo is no longer just the registry, we are moving the registry web
application package out of the repo root into a sub-package. We may break down
the registry package further to separate webapp components and bring the client
package under it. This change accomplishes the task of freeing up the repo root
for a distribution-oriented package. A stub doc.go file is left in place to
declare intent.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Richard
Stephen Day
xiekeyang
Josh Hawn
Olivier Gambier
Stephen J Day
bin liu
Andy Goldstein
Derek McGowan
Richard Scothern
Frederick F. Kautz IV
Ahmet Alp Balkan
David Lawrence
Josh Hawn
Donald Huang
Andrey Kostov
Brian Bland