frostfs-s3-gw/docs/configuration.md
Denis Kirillov e5c1acf1e5 [#591] Sync metrics and pprof configuration
Signed-off-by: Denis Kirillov <denis@nspcc.ru>
2022-07-29 09:32:08 +03:00

17 KiB

Configuration

There are three ways to configure the S3 GW:

  1. CLI parameters
  2. YAML file
  3. Environment variables

Everything available as a CLI parameter can also be specified via environment variables and almost everything can be specified via .yaml configuration file.

But not vice versa, some parameters can be configured only with environment variables/configuration file. Most of these parameters have default values, therefore, these ways to configure the gateway are optional and basic configuration can be completed with CLI parameters only.

  1. CLI parameters
    1. Nodes and weights
    2. Wallet
    3. Binding and TLS
    4. RPC endpoint and resolving of bucket names
    5. Processing of requests
    6. Connection to NeoFS
    7. Monitoring and metrics
  2. YAML file and environment variables
    1. Configuration file

CLI parameters

Nodes and weights

You can specify multiple -p options to add more NeoFS nodes; this will make a gateway spread requests equally among them (using weight 1 for every node):

$ neofs-s3-gw -p 192.168.130.72:8080 -p 192.168.130.71:8080

If you want some specific load distribution proportions, use weights and priorities, they can only be specified via environment variables or a configuration file.

Wallet

Wallet (--wallet) is a mandatory parameter. It is a path to a wallet file. You can provide a passphrase to decrypt a wallet via env variable or conf file, or you will be asked to enter a password interactively. You can also specify an account address to use from a wallet using the --address parameter.

Listening on address and TLS

You can make the gateway listen on specific address using the --listen_address option.

It can also provide TLS interface for its users, just specify paths to the key and certificate files via --tls.key_file and --tls.cert_file parameters. Note that using these options makes gateway TLS-only. If you need to serve both TLS and plain text, you either have to run two gateway instances or use some external redirecting solution.

Example to bind to 192.168.130.130:443 and serve TLS there (keys and nodes are omitted):

$ neofs-s3-gw --listen_address 192.168.130.130:443 \
  --tls.key_file=key.pem --tls.cert_file=cert.pem

RPC endpoint and resolving of bucket names

To set RPC endpoint specify a value of parameter -r or --rpc_endpoint. The parameter is required if another parameter's --resolve_order value contains nns.

$ neofs-s3-gw --rpc_endpoint http://morph-chain.neofs.devenv:30333/ --resolve_order nns,dns

Processing of requests

Maximum number of clients whose requests can be handled by the gateway can be specified by the value of --max_clients_count parameter. --max_clients_deadline defines deadline after which the gate sends error RequestTimeout to a client.

$ neofs-s3-gw --max_clients_count 150 --max_clients_deadline 1m

Connection to NeoFS

Timeout to connect to NeoFS nodes can be set with --connect_timeout and timeout to check node health during rebalance--healthcheck_timeout.

Also, interval to check node health can be specified by --rebalance_interval value.

$ neofs-s3-gw --healthcheck_timeout 15s --connect_timeout 1m --rebalance_interval 1h

Monitoring and metrics

Pprof and Prometheus are integrated into the gateway. To enable them, use --pprof and --metrics flags or S3_GW_PPROF/S3_GW_METRICS environment variables.

YAML file and environment variables

Example of a YAML configuration file: yaml-example Examples of environment variables: env-example.

A path to a configuration file can be specified with --config parameter:

$ neofs-s3-gw --config your-config.yaml

NeoFS S3 Gateway configuration file

This section contains detailed NeoFS S3 Gateway configuration file description including default config values and some tips to set up configurable values.

There are some custom types used for brevity:

  • duration -- string consisting of a number and a suffix. Suffix examples include s (seconds), m (minutes), ms ( milliseconds).

Structure

Section Description
no section General parameters
wallet Wallet configuration
peers Nodes configuration
tls TLS configuration
logger Logger configuration
tree Tree configuration
cache Cache configuration
nats NATS configuration
cors CORS configuration
pprof Pprof configuration
prometheus Prometheus configuration

General section

address: NfgHwwTi3wHAS8aFAN243C5vGbkYDpqLHP

listen_address: 0.0.0.0:8084

rpc_endpoint: http://morph-chain.neofs.devenv:30333
resolve_order:
  - nns
  - dns

connect_timeout: 10s
healthcheck_timeout: 15s
rebalance_interval: 60s

max_clients_count: 100
max_clients_deadline: 30s

default_policy: REP 3
Parameter Type Default value Description
address string Account address to get from wallet. If omitted default one will be used.
listen_address string 0.0.0.0:8080 The address that the gateway is listening on.
rpc_endpoint string The address of the RPC host to which the gateway connects to resolve bucket names (required to use the nns resolver).
resolve_order []string [dns] Order of bucket name resolvers to use. Available resolvers: dns, nns.
connect_timeout duration 10s Timeout to connect to a node.
healthcheck_timeout duration 15s Timeout to check node health during rebalance.
rebalance_interval duration 60s Interval to check node health.
max_clients_count int 100 Limits for processing of clients' requests.
max_clients_deadline duration 30s Deadline after which the gate sends error RequestTimeout to a client.
default_policy string REP 3 Default policy of placing containers in NeoFS. If a user sends a request CreateBucket and doesn't define policy for placing of a container in NeoFS, the S3 Gateway will put the container with default policy.

wallet section

wallet:
  passphrase: "password"
Parameter Type Default value Description
passphrase string Passphrase to decrypt wallet.

peers section

# Nodes configuration
# This configuration makes the gateway use the first node (node1.neofs:8080)
# while it's healthy. Otherwise, gateway uses the second node (node2.neofs:8080)
# for 10% of requests and the third node (node3.neofs:8080) for 90% of requests.
# Until nodes with the same priority level are healthy
# nodes with other priority are not used.
# The lower the value, the higher the priority.
peers:
  0:
    address: node1.neofs:8080
    priority: 1
    weight: 1
  1:
    address: node2.neofs:8080
    priority: 2
    weight: 0.1
  2:
    address: node3.neofs:8080
    priority: 2
    weight: 0.9
Parameter Type Default value Description
address string Address of storage node.
priority int 1 It allows to group nodes and don't switch group until all nodes with the same priority will be unhealthy. The lower the value, the higher the priority.
weight float 1 Weight of node in the group with the same priority. Distribute requests to nodes proportionally to these values.

tls section

tls:
  cert_file: /path/to/cert
  key_file: /path/to/key
Parameter Type Default value Description
cert_file string Path to the TLS certificate.
key_file string Path to the key.

logger section

logger:
  level: debug
Parameter Type Default value Description
level string debug Logging level.
Possible values: debug, info, warn, error, dpanic, panic, fatal.

tree section

tree:
  service: s01.neofs.devenv:8080
Parameter Type Default value Description
service string Endpoint of the tree service. Must be provided. Can be one of the node address (from the peers section).

cache section

cache:
  objects:
    lifetime: 300s
    size: 150
  list:
    lifetime: 1m
    size: 100
  names:
    lifetime: 1m
    size: 1000
  buckets:
    lifetime: 1m
    size: 500
  system:
    lifetime: 2m
    size: 1000
  accessbox:
    lifetime: 5m
    size: 10
Parameter Type Default value Description
objects Cache config lifetime: 5m
size: 1000000
Cache for objects (NeoFS headers).
list Cache config lifetime: 60s
size: 100000
Cache which keeps lists of objects in buckets.
names Cache config lifetime: 60s
size: 10000
Cache which contains mapping of nice name to object addresses.
buckets Cache config lifetime: 60s
size: 1000
Cache which contains mapping of bucket name to bucket info.
system Cache config lifetime: 5m
size: 10000
Cache for system objects in a bucket: bucket settings, notification configuration etc.
accessbox Cache config lifetime: 10m
size: 100
Cache which stores access box with tokens by its address.

cache subsection

lifetime: 2m
size: 1000
Parameter Type Default value Description
lifetime duration depends on cache Lifetime of entries in cache.
size int depends on cache LRU cache size.

nats section

This is an advanced section, use with caution. You can turn on notifications about successful completions of basic operations, and the gateway will send notifications via NATS JetStream.

  1. to configure the NATS server with JetStream
  2. to specify NATS parameters for the S3 GW. It's necessary to define a values of nats.enable or S3_GW_NATS_ENABLED as True
  3. to configure notifications in a bucket
nats:
  enabled: true
  endpoint: nats://localhost:4222
  timeout: 30s
  cert_file: /path/to/cert
  key_file: /path/to/key
  root_ca: /path/to/ca
Parameter Type Default value Description
enabled bool false Flag to enable the service.
endpoint string NATS endpoint to connect to.
timeout duration 30s Timeout for the object notification operation.
certificate string Path to the client certificate.
key string Path to the client key.
ca string Override root CA used to verify server certificates.

cors section

cors:
  default_max_age: 600
Parameter Type Default value Description
default_max_age int 600 Value of Access-Control-Max-Age header in seconds.

pprof section

Contains configuration for the pprof profiler.

pprof:
  enabled: true
  address: localhost:8085
Parameter Type Default value Description
enabled bool false Flag to enable the service.
address string localhost:8085 Address that service listener binds to.

prometheus section

Contains configuration for the prometheus metrics service.

prometheus:
  enabled: true
  address: localhost:8086
Parameter Type Default value Description
enabled bool false Flag to enable the service.
address string localhost:8086 Address that service listener binds to.