30 KiB
NeoGo smart contract compiler
The neo-go compiler compiles Go programs to a bytecode that the NEO virtual machine can understand.
Language compatibility
The compiler is mostly compatible with regular Go language specification. However, there are some important deviations that you need to be aware of that make it a dialect of Go rather than a complete port of the language:
new()is not supported, most of the time you can substitute structs with composite literalsmake()is supported for maps and slices with elements of basic typescopy()is supported only for byte slices because of the underlyingMEMCPYopcode- pointers are supported only for struct literals, one can't take an address of an arbitrary variable
- there is no real distinction between different integer types, all of them
work as big.Int in Go with a limit of 256 bit in width; so you can use
intfor just about anything. This is the way integers work in Neo VM and adding proper Go types emulation is considered to be too costly. - goroutines, channels and garbage collection are not supported and will never be because emulating that aspects of Go runtime on top of Neo VM is close to impossible
deferandrecoverare supported except for the cases where panic occurs inreturnstatement because this complicates implementation and imposes runtime overhead for all contracts. This can easily be mitigated by first storing values in variables and returning the result.- lambdas are supported, but closures are not.
- maps are supported, but valid map keys are booleans, integers and strings with length <= 64
- converting value to interface type doesn't change the underlying type, original value will always be used, therefore it never panics and always "succeeds"; it's up to the programmer whether it's a correct use of a value
- type assertion with two return values is not supported; single return value (of the desired type) is supported; type assertion panics if value can't be asserted to the desired type, therefore it's up to the programmer whether assert can be performed successfully.
VM API (interop layer)
Compiler translates interop function calls into NEO VM syscalls or (for custom functions) into NEO VM instructions. Refer to pkg.go.dev for full API documentation. In general it provides the same level of functionality as Neo .net Framework library.
Compiler provides some helpful builtins in util, convert and math packages.
Refer to them for detailed documentation.
_deploy() function has a special meaning and is executed when contract is deployed.
It should return no value and accept two arguments: the first one is data containing
all values deploy is aware of and able to make use of; the second one is a bool
argument which will be true on contract update.
_deploy() functions are called for every imported package in the same order as init().
Quick start
Go setup
The compiler uses Go parser internally and depends on regular Go compiler
presence, so make sure you have it installed and set up. On some distributions
this requires you to set proper GOROOT environment variable, like
export GOROOT=/usr/lib64/go/1.15
The best way to create a new contract is to use contract init command. This will
create an example source file, a config file and go.mod with github.com/nspcc-dev/neo-go/pkg/interop dependency.
$ ./bin/neo-go contract init --name MyAwesomeContract
$ cd MyAwesomeContract
You'll also need to download dependency modules for your contract like this (in the directory containing contract package):
$ go mod tidy
Compiling
./bin/neo-go contract compile -i contract.go
By default, the filename will be the name of your .go file with the .nef extension, the file will be located in the same directory with your Go contract. If you want another location for your compiled contract:
./bin/neo-go contract compile -i contract.go --out /Users/foo/bar/contract.nef
If your contract is split across multiple files, you must provide a path
to the directory where package files are contained instead of a single Go file
(out.nef will be used as the default output file in this case):
./bin/neo-go contract compile -i ./path/to/contract
Debugging
You can dump the opcodes generated by the compiler with the following command:
./bin/neo-go contract inspect -i contract.go -c
This will result in something like this:
INDEX OPCODE PARAMETER
0 INITSLOT 4 local, 2 arg <<
3 LDARG1
4 NOT
5 JMPIFNOT_L 151 (146/92000000)
10 SYSCALL System.Storage.GetContext (9bf667ce)
15 NOP
16 STLOC0
17 PUSHDATA1 53746f72616765206b6579206e6f7420796574207365742e2053657474696e6720746f2030 ("Storage key not yet set. Setting to 0")
56 CONVERT Buffer (30)
58 PUSH1
59 PACK
60 STLOC1
61 PUSHDATA1 696e666f ("info")
67 LDLOC1
68 SWAP
69 SYSCALL System.Runtime.Notify (95016f61)
74 NOP
75 PUSH0
76 STLOC2
77 LDLOC0
78 PUSHDATA1 746573742d73746f726167652d6b6579 ("test-storage-key")
96 LDLOC2
97 REVERSE3
98 SYSCALL System.Storage.Put (e63f1884)
103 NOP
104 PUSHDATA1 53746f72616765206b657920697320696e697469616c69736564 ("Storage key is initialised")
132 CONVERT Buffer (30)
134 PUSH1
135 PACK
136 STLOC3
137 PUSHDATA1 696e666f ("info")
143 LDLOC3
144 SWAP
145 SYSCALL System.Runtime.Notify (95016f61)
150 NOP
151 RET
152 INITSLOT 5 local, 0 arg
155 SYSCALL System.Storage.GetContext (9bf667ce)
160 NOP
161 STLOC0
162 LDLOC0
163 PUSHDATA1 746573742d73746f726167652d6b6579 ("test-storage-key")
181 SWAP
182 SYSCALL System.Storage.Get (925de831)
187 NOP
188 STLOC1
189 PUSHDATA1 56616c756520726561642066726f6d2073746f72616765 ("Value read from storage")
214 CONVERT Buffer (30)
216 PUSH1
217 PACK
218 STLOC2
219 PUSHDATA1 696e666f ("info")
225 LDLOC2
226 SWAP
227 SYSCALL System.Runtime.Notify (95016f61)
232 NOP
233 PUSHDATA1 53746f72616765206b657920616c7265616479207365742e20496e6372656d656e74696e672062792031 ("Storage key already set. Incrementing by 1")
277 CONVERT Buffer (30)
279 PUSH1
280 PACK
281 STLOC3
282 PUSHDATA1 696e666f ("info")
288 LDLOC3
289 SWAP
290 SYSCALL System.Runtime.Notify (95016f61)
295 NOP
296 LDLOC1
297 CONVERT Integer (21)
299 PUSH1
300 ADD
301 STLOC1
302 LDLOC0
303 PUSHDATA1 746573742d73746f726167652d6b6579 ("test-storage-key")
321 LDLOC1
322 REVERSE3
323 SYSCALL System.Storage.Put (e63f1884)
328 NOP
329 PUSHDATA1 4e65772076616c7565207772697474656e20696e746f2073746f72616765 ("New value written into storage")
361 CONVERT Buffer (30)
363 PUSH1
364 PACK
365 STLOC4
366 PUSHDATA1 696e666f ("info")
372 LDLOC4
373 SWAP
374 SYSCALL System.Runtime.Notify (95016f61)
379 NOP
380 LDLOC1
381 RET
Neo Smart Contract Debugger support
It's possible to debug contracts written in Go using standard Neo Smart
Contract Debugger which is a
part of Neo Blockchain
Toolkit. To do that
you need to generate debug information using --debug option, like this:
$ ./bin/neo-go contract compile -i contract.go -c contract.yml -m contract.manifest.json -o contract.nef --debug contract.debug.json
This file can then be used by debugger and set up to work just like for any other supported language.
Deploying
Deploying a contract to blockchain with neo-go requires both NEF and JSON
manifest generated by the compiler from a configuration file provided in YAML
format. To create contract manifest, pass a YAML file with -c parameter and
specify the manifest output file with -m:
./bin/neo-go contract compile -i contract.go -c config.yml -m contract.manifest.json
Example of such YAML file contents:
name: Contract
safemethods: []
supportedstandards: []
events:
- name: info
parameters:
- name: message
type: String
Then, the manifest can be passed to the deploy command via -m option:
$ ./bin/neo-go contract deploy -i contract.nef -m contract.manifest.json -r http://localhost:20331 -w wallet.json
Deployment works via an RPC server, an address of which is passed via -r
option, and should be signed using a wallet from -w option. More details can
be found in deploy command help.
Config file
Configuration file contains following options:
| Parameter | Description | Example |
|---|---|---|
name |
Contract name in the manifest. | "My awesome contract" |
safemethods |
List of methods which don't change contract state, don't emit notifications and are available for anyone to call. | ["balanceOf", "decimals"] |
supportedstandards |
List of standards this contract implements. For example, NEP-11 or NEP-17 token standard. This will enable additional checks in compiler. The check can be disabled with --no-standards flag. |
["NEP-17"] |
events |
Notifications emitted by this contract. | See Events. |
permissions |
Foreign calls allowed for this contract. | See Permissions. |
overloads |
Custom method names for this contract. | See Overloads. |
Events
Each event must have a name and 0 or more parameters. Parameters are specified using their name and type. Both event and parameter names must be strings. Parameter type can be one of the following:
| Type in code | Type in config file |
|---|---|
bool |
Boolean |
int, int64 etc. |
Integer |
[]byte |
ByteArray |
string |
String |
Any non-byte slice []T |
Array |
map[K]V |
Map |
interop.Hash160 |
Hash160 |
interop.Hash256 |
Hash256 |
interop.Interface |
InteropInterface |
interop.PublicKey |
PublicKey |
interop.Signature |
Signature |
| anything else | Any |
interop.* types are defined as aliases in github.com/nspcc-dev/neo-go/pkg/interop module
with the sole purpose of correct manifest generation.
As an example, consider Transfer event from NEP-17 standard:
- name: Transfer
parameters:
- name: from
type: Hash160
- name: to
type: Hash160
- name: amount
type: Integer
By default, compiler performs some sanity checks. Most of the time
it will report missing events and/or parameter type mismatch.
It isn't prohibited to use a variable as an event name in code, but it will prevent
the compiler from analyzing the event. It is better to use either constant or string literal.
It isn't prohibited to use ellipsis expression as an event arguments, but it will also
prevent the compiler from analyzing the event. It is better to provide arguments directly
without .... The type conversion code will be emitted for checked events, it will cast
argument types to ones specified in the contract manifest. These checks and conversion can
be disabled with --no-events flag.
Permissions
Each permission specifies contracts and methods allowed for this permission. If a contract is not specified in a rule, specified set of methods can be called on any contract. By default, no calls are allowed. The simplest permission is to allow everything:
- methods: '*'
Another common case is to allow calling onNEP17Payment, which is necessary
for most of the NEP-17 token implementations:
- methods: ["onNEP17Payment"]
In addition to methods, permission can have one of these fields:
hashcontains hash and restricts a set of contracts to a single contract.groupcontains public key and restricts a set of contracts to those that have the corresponding group in their manifest.
Consider an example:
- methods: ["onNEP17Payment"]
- hash: fffdc93764dbaddd97c48f252a53ea4643faa3fd
methods: ["start", "stop"]
- group: 03184b018d6b2bc093e535519732b3fd3f7551c8cffaf4621dd5a0b89482ca66c9
methods: ["update"]
This set of permissions allows calling:
onNEP17Paymentmethod of any contractstartandstopmethods of contract with hashfffdc93764dbaddd97c48f252a53ea4643faa3fdupdatemethod of contract in group with public key03184b018d6b2bc093e535519732b3fd3f7551c8cffaf4621dd5a0b89482ca66c9
Also note that a native contract must be included here too. For example, if your contract
transfers NEO/GAS or gets some info from the Ledger contract, all of these
calls must be allowed in permissions.
The compiler does its best to ensure that correct permissions are specified in the config.
Incorrect permissions will result in runtime invocation failures.
Using either constant or literal for contract hash and method will allow the compiler
to perform more extensive analysis.
This check can be disabled with --no-permissions flag.
Overloads
NeoVM allows a contract to have multiple methods with the same name
but different parameters number. Go lacks this feature, but this can be circumvented
with overloads section. Essentially, it is a mapping from default contract method names
to the new ones.
- overloads:
oldName1: newName
oldName2: newName
Since the use-case for this is to provide multiple implementations with the same ABI name,
newName is required to be already present in the compiled contract.
As an example, consider NEP-11 standard.
It requires a divisible NFT contract to have 2 transfer methods. To achieve this, we might implement
Transfer and TransferDivisible and specify the emitted name in the config:
- overloads:
transferDivisible:transfer
Manifest file
Any contract can be included in a group identified by a public key which is used in permissions.
This is achieved with manifest add-group command.
./bin/neo-go contract manifest add-group -n contract.nef -m contract.manifest.json --sender <sender> --wallet /path/to/wallet.json --account <account>
It accepts contract .nef and manifest files emitted by compile command as well as
sender and signer accounts. --sender is the account that will send deploy transaction later (not necessarily in wallet).
--account is the wallet account which signs contract hash using group private key.
Neo Express support
It's possible to deploy contracts written in Go using Neo
Express, which is a part of Neo
Blockchain
Toolkit. To do that,
you need to generate a different metadata file using YAML written for
deployment with neo-go. It's done in the same step with compilation via
--config input parameter and --abi output parameter, combined with debug
support the command line will look like this:
$ ./bin/neo-go contract compile -i contract.go --config contract.yml -o contract.nef --debug contract.debug.json --abi contract.abi.json
This file can then be used by toolkit to deploy contract the same way contracts in other languages are deployed.
Invoking
You can import your contract into a standalone VM and run it there (see VM
documentation for more info), but that only works for simple contracts
that don't use blockchain a lot. For more real contracts you need to deploy
them first and then do test invocations and regular invocations with contract testinvokefunction and contract invokefunction commands (or their variants,
see contract command help for more details. They all work via RPC, so it's a
mandatory parameter.
Example call (contract f84d6a337fbc3d3a201d41da99e86b479e7a2554 with method
balanceOf and method's parameter AK2nJJpJr6o664CWJKi1QRXjqeic2zRp8y using
given RPC server and wallet and paying 0.00001 extra GAS for this transaction):
$ ./bin/neo-go contract invokefunction -r http://localhost:20331 -w my_wallet.json -g 0.00001 f84d6a337fbc3d3a201d41da99e86b479e7a2554 balanceOf AK2nJJpJr6o664CWJKi1QRXjqeic2zRp8y
Generating contract bindings
To be able to use deployed contract from another contract one needs to have its interface definition (exported methods and hash). While it is possible to use generic contract.Call interop interface, it's not very convenient and efficient. NeoGo can autogenerate contract bindings in Go language for any deployed contract based on its manifest, it creates a Go source file with all of the contract's methods that then can be imported and used as a regular Go package.
$ ./bin/neo-go contract generate-wrapper --manifest manifest.json --out wrapper.go --hash 0x1b4357bff5a01bdf2a6581247cf9ed1e24629176
Notice that some structured types can be omitted this way (when a function returns some structure it's just an "Array" type in the manifest with no internal details), but if the contract you're using is written in Go originally you can create a specific configuration file during compilation that will add this data for wrapper generator to use:
$ ./bin/neo-go contract compile -i contract.go --config contract.yml -o contract.nef --manifest manifest.json --bindings contract.bindings.yml
$ ./bin/neo-go contract generate-wrapper --manifest manifest.json --config contract.bindings.yml --out wrapper.go --hash 0x1b4357bff5a01bdf2a6581247cf9ed1e24629176
Generating RPC contract bindings
To simplify interacting with the contract via RPC you can generate contract-specific RPC bindings with the "generate-rpcwrapper" command. At the moment it only works for safe (read-only) methods. If your contract is NEP-11 or NEP-17 that's autodetected and an appropriate package is included as well. Notice that the type data available in the manifest is limited, so in some cases the interface generated may use generic stackitem types. Iterators are not supported yet.
$ ./bin/neo-go contract generate-rpcwrapper --manifest manifest.json --out rpcwrapper.go --hash 0x1b4357bff5a01bdf2a6581247cf9ed1e24629176
Smart contract examples
Some examples are provided in the examples directory. For more sophisticated real-world contracts written in Go check out NeoFS contracts.
How to report compiler bugs
- Make a proper testcase (example testcases can be found in the tests folder)
- Create an issue on Github
- Make a PR with a reference to the created issue, containing the testcase that proves the bug
- Either you fix the bug yourself or wait for patch that solves the problem