rclone/docs/content/commands/rclone_bisync.md

11 KiB

title description groups status versionIntroduced
rclone bisync Perform bidirectional synchronization between two paths. Filter,Copy,Important Beta v1.58

rclone bisync

Perform bidirectional synchronization between two paths.

Synopsis

Perform bidirectional synchronization between two paths.

Bisync provides a bidirectional cloud sync solution in rclone. It retains the Path1 and Path2 filesystem listings from the prior run. On each successive run it will:

  • list files on Path1 and Path2, and check for changes on each side. Changes include New, Newer, Older, and Deleted files.
  • Propagate changes on Path1 to Path2, and vice-versa.

Bisync is in beta and is considered an advanced command, so use with care. Make sure you have read and understood the entire manual (especially the Limitations section) before using, or data loss can result. Questions can be asked in the Rclone Forum.

See full bisync description for details.

rclone bisync remote1:path1 remote2:path2 [flags]

Options

      --backup-dir1 string                   --backup-dir for Path1. Must be a non-overlapping path on the same remote.
      --backup-dir2 string                   --backup-dir for Path2. Must be a non-overlapping path on the same remote.
      --check-access                         Ensure expected RCLONE_TEST files are found on both Path1 and Path2 filesystems, else abort.
      --check-filename string                Filename for --check-access (default: RCLONE_TEST)
      --check-sync string                    Controls comparison of final listings: true|false|only (default: true) (default "true")
      --compare string                       Comma-separated list of bisync-specific compare options ex. 'size,modtime,checksum' (default: 'size,modtime')
      --conflict-loser ConflictLoserAction   Action to take on the loser of a sync conflict (when there is a winner) or on both files (when there is no winner): , num, pathname, delete (default: num)
      --conflict-resolve string              Automatically resolve conflicts by preferring the version that is: none, path1, path2, newer, older, larger, smaller (default: none) (default "none")
      --conflict-suffix string               Suffix to use when renaming a --conflict-loser. Can be either one string or two comma-separated strings to assign different suffixes to Path1/Path2. (default: 'conflict')
      --create-empty-src-dirs                Sync creation and deletion of empty directories. (Not compatible with --remove-empty-dirs)
      --download-hash                        Compute hash by downloading when otherwise unavailable. (warning: may be slow and use lots of data!)
      --filters-file string                  Read filtering patterns from a file
      --force                                Bypass --max-delete safety check and run the sync. Consider using with --verbose
  -h, --help                                 help for bisync
      --ignore-listing-checksum              Do not use checksums for listings (add --ignore-checksum to additionally skip post-copy checksum checks)
      --max-lock Duration                    Consider lock files older than this to be expired (default: 0 (never expire)) (minimum: 2m) (default 0s)
      --no-cleanup                           Retain working files (useful for troubleshooting and testing).
      --no-slow-hash                         Ignore listing checksums only on backends where they are slow
      --recover                              Automatically recover from interruptions without requiring --resync.
      --remove-empty-dirs                    Remove ALL empty directories at the final cleanup step.
      --resilient                            Allow future runs to retry after certain less-serious errors, instead of requiring --resync. Use at your own risk!
  -1, --resync                               Performs the resync run. Equivalent to --resync-mode path1. Consider using --verbose or --dry-run first.
      --resync-mode string                   During resync, prefer the version that is: path1, path2, newer, older, larger, smaller (default: path1 if --resync, otherwise none for no resync.) (default "none")
      --slow-hash-sync-only                  Ignore slow checksums for listings and deltas, but still consider them during sync calls.
      --workdir string                       Use custom working dir - useful for testing. (default: {WORKDIR})

Copy Options

Flags for anything which can Copy a file.

      --check-first                                 Do all the checks before starting transfers
  -c, --checksum                                    Check for changes with size & checksum (if available, or fallback to size only).
      --compare-dest stringArray                    Include additional comma separated server-side paths during comparison
      --copy-dest stringArray                       Implies --compare-dest but also copies files from paths into destination
      --cutoff-mode HARD|SOFT|CAUTIOUS              Mode to stop transfers when reaching the max transfer limit HARD|SOFT|CAUTIOUS (default HARD)
      --ignore-case-sync                            Ignore case when synchronizing
      --ignore-checksum                             Skip post copy check of checksums
      --ignore-existing                             Skip all files that exist on destination
      --ignore-size                                 Ignore size when skipping use modtime or checksum
  -I, --ignore-times                                Don't skip items that match size and time - transfer all unconditionally
      --immutable                                   Do not modify files, fail if existing files have been modified
      --inplace                                     Download directly to destination file instead of atomic download to temp/rename
      --max-backlog int                             Maximum number of objects in sync or check backlog (default 10000)
      --max-duration Duration                       Maximum duration rclone will transfer data for (default 0s)
      --max-transfer SizeSuffix                     Maximum size of data to transfer (default off)
  -M, --metadata                                    If set, preserve metadata when copying objects
      --modify-window Duration                      Max time diff to be considered the same (default 1ns)
      --multi-thread-chunk-size SizeSuffix          Chunk size for multi-thread downloads / uploads, if not set by filesystem (default 64Mi)
      --multi-thread-cutoff SizeSuffix              Use multi-thread downloads for files above this size (default 256Mi)
      --multi-thread-streams int                    Number of streams to use for multi-thread downloads (default 4)
      --multi-thread-write-buffer-size SizeSuffix   In memory buffer size for writing when in multi-thread mode (default 128Ki)
      --no-check-dest                               Don't check the destination, copy regardless
      --no-traverse                                 Don't traverse destination file system on copy
      --no-update-dir-modtime                       Don't update directory modification times
      --no-update-modtime                           Don't update destination modtime if files identical
      --order-by string                             Instructions on how to order the transfers, e.g. 'size,descending'
      --partial-suffix string                       Add partial-suffix to temporary file name when --inplace is not used (default ".partial")
      --refresh-times                               Refresh the modtime of remote files
      --server-side-across-configs                  Allow server-side operations (e.g. copy) to work across different configs
      --size-only                                   Skip based on size only, not modtime or checksum
      --streaming-upload-cutoff SizeSuffix          Cutoff for switching to chunked upload if file size is unknown, upload starts after reaching cutoff or when file ends (default 100Ki)
  -u, --update                                      Skip files that are newer on the destination

Important Options

Important flags useful for most commands.

  -n, --dry-run         Do a trial run with no permanent changes
  -i, --interactive     Enable interactive mode
  -v, --verbose count   Print lots more stuff (repeat for more)

Filter Options

Flags for filtering directory listings.

      --delete-excluded                     Delete files on dest excluded from sync
      --exclude stringArray                 Exclude files matching pattern
      --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
      --exclude-if-present stringArray      Exclude directories if filename is present
      --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
      --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
  -f, --filter stringArray                  Add a file filtering rule
      --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
      --ignore-case                         Ignore case in filters (case insensitive)
      --include stringArray                 Include files matching pattern
      --include-from stringArray            Read file include patterns from file (use - to read from stdin)
      --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
      --max-depth int                       If set limits the recursion depth to this (default -1)
      --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
      --metadata-exclude stringArray        Exclude metadatas matching pattern
      --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
      --metadata-filter stringArray         Add a metadata filtering rule
      --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
      --metadata-include stringArray        Include metadatas matching pattern
      --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
      --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
      --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)

See the global flags page for global options not listed here.

SEE ALSO

  • rclone - Show help for rclone commands, flags and backends.