rclone/docs/content/s3.md at 3e53376a4954b800ecf80380a2122a9df73302e9

Fabian Möller 33f129fbbc s3: use lib/encoder

Co-authored-by: Nick Craig-Wood <nick@craig-wood.com>

2019-09-30 22:00:24 +01:00

55 KiB

Raw Blame History

title	description	date
Amazon S3	Rclone docs for Amazon S3	2016-07-11

Amazon S3 Storage Providers

The S3 backend can be used with a number of different providers:

{{< provider name="AWS S3" home="https://aws.amazon.com/s3/" config="/s3/#amazon-s3" >}}
{{< provider name="Alibaba Cloud (Aliyun) Object Storage System (OSS)" home="https://www.alibabacloud.com/product/oss/" config="/s3/#alibaba-oss" >}}
{{< provider name="Ceph" home="http://ceph.com/" config="/s3/#ceph" >}}
{{< provider name="DigitalOcean Spaces" home="https://www.digitalocean.com/products/object-storage/" config="/s3/#digitalocean-spaces" >}}
{{< provider name="Dreamhost" home="https://www.dreamhost.com/cloud/storage/" config="/s3/#dreamhost" >}}
{{< provider name="IBM COS S3" home="http://www.ibm.com/cloud/object-storage" config="/s3/#ibm-cos-s3" >}}
{{< provider name="Minio" home="https://www.minio.io/" config="/s3/#minio" >}}
{{< provider name="Wasabi" home="https://wasabi.com/" config="/s3/#wasabi" >}}

Paths are specified as remote:bucket (or remote: for the lsd command.) You may put subdirectories in too, eg remote:bucket/path/to/dir.

Once you have made a remote (see the provider specific section above) you can use it like this:

See all buckets

rclone lsd remote:

Make a new bucket

rclone mkdir remote:bucket

List the contents of a bucket

rclone ls remote:bucket

Sync /home/local/directory to the remote bucket, deleting any excess files in the bucket.

rclone sync /home/local/directory remote:bucket

AWS S3

Here is an example of making an s3 configuration. First run

rclone config

This will guide you through an interactive setup process.

No remotes found - make a new one
n) New remote
s) Set configuration password
q) Quit config
n/s/q> n
name> remote
Type of storage to configure.
Choose a number from below, or type in your own value
[snip]
XX / Amazon S3 Compliant Storage Providers (AWS, Ceph, Dreamhost, IBM COS, Minio)
   \ "s3"
[snip]
Storage> s3
Choose your S3 provider.
Choose a number from below, or type in your own value
 1 / Amazon Web Services (AWS) S3
   \ "AWS"
 2 / Ceph Object Storage
   \ "Ceph"
 3 / Digital Ocean Spaces
   \ "DigitalOcean"
 4 / Dreamhost DreamObjects
   \ "Dreamhost"
 5 / IBM COS S3
   \ "IBMCOS"
 6 / Minio Object Storage
   \ "Minio"
 7 / Wasabi Object Storage
   \ "Wasabi"
 8 / Any other S3 compatible provider
   \ "Other"
provider> 1
Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars). Only applies if access_key_id and secret_access_key is blank.
Choose a number from below, or type in your own value
 1 / Enter AWS credentials in the next step
   \ "false"
 2 / Get AWS credentials from the environment (env vars or IAM)
   \ "true"
env_auth> 1
AWS Access Key ID - leave blank for anonymous access or runtime credentials.
access_key_id> XXX
AWS Secret Access Key (password) - leave blank for anonymous access or runtime credentials.
secret_access_key> YYY
Region to connect to.
Choose a number from below, or type in your own value
   / The default endpoint - a good choice if you are unsure.
 1 | US Region, Northern Virginia or Pacific Northwest.
   | Leave location constraint empty.
   \ "us-east-1"
   / US East (Ohio) Region
 2 | Needs location constraint us-east-2.
   \ "us-east-2"
   / US West (Oregon) Region
 3 | Needs location constraint us-west-2.
   \ "us-west-2"
   / US West (Northern California) Region
 4 | Needs location constraint us-west-1.
   \ "us-west-1"
   / Canada (Central) Region
 5 | Needs location constraint ca-central-1.
   \ "ca-central-1"
   / EU (Ireland) Region
 6 | Needs location constraint EU or eu-west-1.
   \ "eu-west-1"
   / EU (London) Region
 7 | Needs location constraint eu-west-2.
   \ "eu-west-2"
   / EU (Frankfurt) Region
 8 | Needs location constraint eu-central-1.
   \ "eu-central-1"
   / Asia Pacific (Singapore) Region
 9 | Needs location constraint ap-southeast-1.
   \ "ap-southeast-1"
   / Asia Pacific (Sydney) Region
10 | Needs location constraint ap-southeast-2.
   \ "ap-southeast-2"
   / Asia Pacific (Tokyo) Region
11 | Needs location constraint ap-northeast-1.
   \ "ap-northeast-1"
   / Asia Pacific (Seoul)
12 | Needs location constraint ap-northeast-2.
   \ "ap-northeast-2"
   / Asia Pacific (Mumbai)
13 | Needs location constraint ap-south-1.
   \ "ap-south-1"
   / South America (Sao Paulo) Region
14 | Needs location constraint sa-east-1.
   \ "sa-east-1"
region> 1
Endpoint for S3 API.
Leave blank if using AWS to use the default endpoint for the region.
endpoint> 
Location constraint - must be set to match the Region. Used when creating buckets only.
Choose a number from below, or type in your own value
 1 / Empty for US Region, Northern Virginia or Pacific Northwest.
   \ ""
 2 / US East (Ohio) Region.
   \ "us-east-2"
 3 / US West (Oregon) Region.
   \ "us-west-2"
 4 / US West (Northern California) Region.
   \ "us-west-1"
 5 / Canada (Central) Region.
   \ "ca-central-1"
 6 / EU (Ireland) Region.
   \ "eu-west-1"
 7 / EU (London) Region.
   \ "eu-west-2"
 8 / EU Region.
   \ "EU"
 9 / Asia Pacific (Singapore) Region.
   \ "ap-southeast-1"
10 / Asia Pacific (Sydney) Region.
   \ "ap-southeast-2"
11 / Asia Pacific (Tokyo) Region.
   \ "ap-northeast-1"
12 / Asia Pacific (Seoul)
   \ "ap-northeast-2"
13 / Asia Pacific (Mumbai)
   \ "ap-south-1"
14 / South America (Sao Paulo) Region.
   \ "sa-east-1"
location_constraint> 1
Canned ACL used when creating buckets and/or storing objects in S3.
For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl
Choose a number from below, or type in your own value
 1 / Owner gets FULL_CONTROL. No one else has access rights (default).
   \ "private"
 2 / Owner gets FULL_CONTROL. The AllUsers group gets READ access.
   \ "public-read"
   / Owner gets FULL_CONTROL. The AllUsers group gets READ and WRITE access.
 3 | Granting this on a bucket is generally not recommended.
   \ "public-read-write"
 4 / Owner gets FULL_CONTROL. The AuthenticatedUsers group gets READ access.
   \ "authenticated-read"
   / Object owner gets FULL_CONTROL. Bucket owner gets READ access.
 5 | If you specify this canned ACL when creating a bucket, Amazon S3 ignores it.
   \ "bucket-owner-read"
   / Both the object owner and the bucket owner get FULL_CONTROL over the object.
 6 | If you specify this canned ACL when creating a bucket, Amazon S3 ignores it.
   \ "bucket-owner-full-control"
acl> 1
The server-side encryption algorithm used when storing this object in S3.
Choose a number from below, or type in your own value
 1 / None
   \ ""
 2 / AES256
   \ "AES256"
server_side_encryption> 1
The storage class to use when storing objects in S3.
Choose a number from below, or type in your own value
 1 / Default
   \ ""
 2 / Standard storage class
   \ "STANDARD"
 3 / Reduced redundancy storage class
   \ "REDUCED_REDUNDANCY"
 4 / Standard Infrequent Access storage class
   \ "STANDARD_IA"
 5 / One Zone Infrequent Access storage class
   \ "ONEZONE_IA"
 6 / Glacier storage class
   \ "GLACIER"
 7 / Glacier Deep Archive storage class
   \ "DEEP_ARCHIVE"
 8 / Intelligent-Tiering storage class
   \ "INTELLIGENT_TIERING"
storage_class> 1
Remote config
--------------------
[remote]
type = s3
provider = AWS
env_auth = false
access_key_id = XXX
secret_access_key = YYY
region = us-east-1
endpoint = 
location_constraint = 
acl = private
server_side_encryption = 
storage_class = 
--------------------
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d>

--fast-list

This remote supports --fast-list which allows you to use fewer transactions in exchange for more memory. See the rclone docs for more details.

--update and --use-server-modtime

As noted below, the modified time is stored on metadata on the object. It is used by default for all operations that require checking the time a file was last updated. It allows rclone to treat the remote more like a true filesystem, but it is inefficient because it requires an extra API call to retrieve the metadata.

For many operations, the time the object was last uploaded to the remote is sufficient to determine if it is "dirty". By using --update along with --use-server-modtime, you can avoid the extra API call and simply upload files whose local modtime is newer than the time it was last uploaded.

Modified time

The modified time is stored as metadata on the object as X-Amz-Meta-Mtime as floating point since the epoch accurate to 1 ns.

If the modification time needs to be updated rclone will attempt to perform a server side copy to update the modification if the object can be copied in a single part.
In the case the object is larger than 5Gb or is in Glacier or Glacier Deep Archive storage the object will be uploaded rather than copied.

Restricted filename characters

S3 allows any valid UTF-8 string as a key.

Invalid UTF-8 bytes will be replaced, as they can't be used in XML.

The following characters are replaced since these are problematic when dealing with the REST API:

Character	Value	Replacement
NUL	0x00	␀
/	0x2F	／

The encoding will also encode these file names as they don't seem to work with the SDK properly:

File name	Replacement
.	．
..	．．

Multipart uploads

rclone supports multipart uploads with S3 which means that it can upload files bigger than 5GB.

Note that files uploaded both with multipart upload and through crypt remotes do not have MD5 sums.

rclone switches from single part uploads to multipart uploads at the point specified by --s3-upload-cutoff. This can be a maximum of 5GB and a minimum of 0 (ie always upload multipart files).

The chunk sizes used in the multipart upload are specified by --s3-chunk-size and the number of chunks uploaded concurrently is specified by --s3-upload-concurrency.

Multipart uploads will use --transfers * --s3-upload-concurrency * --s3-chunk-size extra memory. Single part uploads to not use extra memory.

Single part transfers can be faster than multipart transfers or slower depending on your latency from S3 - the more latency, the more likely single part transfers will be faster.

Increasing --s3-upload-concurrency will increase throughput (8 would be a sensible value) and increasing --s3-chunk-size also increases throughput (16M would be sensible). Increasing either of these will use more memory. The default values are high enough to gain most of the possible performance without using too much memory.

Buckets and Regions

With Amazon S3 you can list buckets (rclone lsd) using any region, but you can only access the content of a bucket from the region it was created in. If you attempt to access a bucket from the wrong region, you will get an error, incorrect region, the bucket is not in 'XXX' region.

Authentication

There are a number of ways to supply rclone with a set of AWS credentials, with and without using the environment.

The different authentication methods are tried in this order:

Directly in the rclone configuration file (env_auth = false in the config file):
- access_key_id and secret_access_key are required.
- session_token can be optionally set when using AWS STS.
Runtime configuration (env_auth = true in the config file):
- Export the following environment variables before running rclone:
  - Access Key ID: AWS_ACCESS_KEY_ID or AWS_ACCESS_KEY
  - Secret Access Key: AWS_SECRET_ACCESS_KEY or AWS_SECRET_KEY
  - Session Token: AWS_SESSION_TOKEN (optional)
- Or, use a named profile:
  - Profile files are standard files used by AWS CLI tools
  - By default it will use the profile in your home directory (eg ~/.aws/credentials on unix based systems) file and the "default" profile, to change set these environment variables:
    - AWS_SHARED_CREDENTIALS_FILE to control which file.
    - AWS_PROFILE to control which profile to use.
- Or, run rclone in an ECS task with an IAM role (AWS only).
- Or, run rclone on an EC2 instance with an IAM role (AWS only).

If none of these option actually end up providing rclone with AWS credentials then S3 interaction will be non-authenticated (see below).

S3 Permissions

When using the sync subcommand of rclone the following minimum permissions are required to be available on the bucket being written to:

ListBucket
DeleteObject
GetObject
PutObject
PutObjectACL

When using the lsd subcommand, the ListAllMyBuckets permission is required.

Example policy:

{
    "Version": "2012-10-17",
    "Statement": [
        {
            "Effect": "Allow",
            "Principal": {
                "AWS": "arn:aws:iam::USER_SID:user/USER_NAME"
            },
            "Action": [
                "s3:ListBucket",
                "s3:DeleteObject",
                "s3:GetObject",
                "s3:PutObject",
                "s3:PutObjectAcl"
            ],
            "Resource": [
              "arn:aws:s3:::BUCKET_NAME/*",
              "arn:aws:s3:::BUCKET_NAME"
            ]
        },
        {
            "Effect": "Allow",
            "Action": "s3:ListAllMyBuckets",
            "Resource": "arn:aws:s3:::*"
        }	
    ]
}

Notes on above:

This is a policy that can be used when creating bucket. It assumes that USER_NAME has been created.
The Resource entry must include both resource ARNs, as one implies the bucket and the other implies the bucket's objects.

For reference, here's an Ansible script that will generate one or more buckets that will work with rclone sync.

Key Management System (KMS)

If you are using server side encryption with KMS then you will find you can't transfer small objects. As a work-around you can use the --ignore-checksum flag.

A proper fix is being worked on in issue #1824.

Glacier and Glacier Deep Archive

You can upload objects using the glacier storage class or transition them to glacier using a lifecycle policy. The bucket can still be synced or copied into normally, but if rclone tries to access data from the glacier storage class you will see an error like below.

2017/09/11 19:07:43 Failed to sync: failed to open source object: Object in GLACIER, restore first: path/to/file

In this case you need to restore the object(s) in question before using rclone.

Note that rclone only speaks the S3 API it does not speak the Glacier Vault API, so rclone cannot directly access Glacier Vaults.

Standard Options

Here are the standard options specific to s3 (Amazon S3 Compliant Storage Provider (AWS, Alibaba, Ceph, Digital Ocean, Dreamhost, IBM COS, Minio, etc)).

--s3-provider

Choose your S3 provider.

Config: provider
Env Var: RCLONE_S3_PROVIDER
Type: string
Default: ""
Examples:
- "AWS"
  - Amazon Web Services (AWS) S3
- "Alibaba"
  - Alibaba Cloud Object Storage System (OSS) formerly Aliyun
- "Ceph"
  - Ceph Object Storage
- "DigitalOcean"
  - Digital Ocean Spaces
- "Dreamhost"
  - Dreamhost DreamObjects
- "IBMCOS"
  - IBM COS S3
- "Minio"
  - Minio Object Storage
- "Netease"
  - Netease Object Storage (NOS)
- "Wasabi"
  - Wasabi Object Storage
- "Other"
  - Any other S3 compatible provider

--s3-env-auth

Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars). Only applies if access_key_id and secret_access_key is blank.

Config: env_auth
Env Var: RCLONE_S3_ENV_AUTH
Type: bool
Default: false
Examples:
- "false"
  - Enter AWS credentials in the next step
- "true"
  - Get AWS credentials from the environment (env vars or IAM)

--s3-access-key-id

AWS Access Key ID. Leave blank for anonymous access or runtime credentials.

Config: access_key_id
Env Var: RCLONE_S3_ACCESS_KEY_ID
Type: string
Default: ""

--s3-secret-access-key

AWS Secret Access Key (password) Leave blank for anonymous access or runtime credentials.

Config: secret_access_key
Env Var: RCLONE_S3_SECRET_ACCESS_KEY
Type: string
Default: ""

--s3-region

Region to connect to.

Config: region
Env Var: RCLONE_S3_REGION
Type: string
Default: ""
Examples:
- "us-east-1"
  - The default endpoint - a good choice if you are unsure.
  - US Region, Northern Virginia or Pacific Northwest.
  - Leave location constraint empty.
- "us-east-2"
  - US East (Ohio) Region
  - Needs location constraint us-east-2.
- "us-west-2"
  - US West (Oregon) Region
  - Needs location constraint us-west-2.
- "us-west-1"
  - US West (Northern California) Region
  - Needs location constraint us-west-1.
- "ca-central-1"
  - Canada (Central) Region
  - Needs location constraint ca-central-1.
- "eu-west-1"
  - EU (Ireland) Region
  - Needs location constraint EU or eu-west-1.
- "eu-west-2"
  - EU (London) Region
  - Needs location constraint eu-west-2.
- "eu-north-1"
  - EU (Stockholm) Region
  - Needs location constraint eu-north-1.
- "eu-central-1"
  - EU (Frankfurt) Region
  - Needs location constraint eu-central-1.
- "ap-southeast-1"
  - Asia Pacific (Singapore) Region
  - Needs location constraint ap-southeast-1.
- "ap-southeast-2"
  - Asia Pacific (Sydney) Region
  - Needs location constraint ap-southeast-2.
- "ap-northeast-1"
  - Asia Pacific (Tokyo) Region
  - Needs location constraint ap-northeast-1.
- "ap-northeast-2"
  - Asia Pacific (Seoul)
  - Needs location constraint ap-northeast-2.
- "ap-south-1"
  - Asia Pacific (Mumbai)
  - Needs location constraint ap-south-1.
- "sa-east-1"
  - South America (Sao Paulo) Region
  - Needs location constraint sa-east-1.

--s3-region

Region to connect to. Leave blank if you are using an S3 clone and you don't have a region.

Config: region
Env Var: RCLONE_S3_REGION
Type: string
Default: ""
Examples:
- ""
  - Use this if unsure. Will use v4 signatures and an empty region.
- "other-v2-signature"
  - Use this only if v4 signatures don't work, eg pre Jewel/v10 CEPH.

--s3-endpoint

Endpoint for S3 API. Leave blank if using AWS to use the default endpoint for the region.

Config: endpoint
Env Var: RCLONE_S3_ENDPOINT
Type: string
Default: ""

--s3-endpoint

Endpoint for IBM COS S3 API. Specify if using an IBM COS On Premise.

Config: endpoint
Env Var: RCLONE_S3_ENDPOINT
Type: string
Default: ""
Examples:
- "s3-api.us-geo.objectstorage.softlayer.net"
  - US Cross Region Endpoint
- "s3-api.dal.us-geo.objectstorage.softlayer.net"
  - US Cross Region Dallas Endpoint
- "s3-api.wdc-us-geo.objectstorage.softlayer.net"
  - US Cross Region Washington DC Endpoint
- "s3-api.sjc-us-geo.objectstorage.softlayer.net"
  - US Cross Region San Jose Endpoint
- "s3-api.us-geo.objectstorage.service.networklayer.com"
  - US Cross Region Private Endpoint
- "s3-api.dal-us-geo.objectstorage.service.networklayer.com"
  - US Cross Region Dallas Private Endpoint
- "s3-api.wdc-us-geo.objectstorage.service.networklayer.com"
  - US Cross Region Washington DC Private Endpoint
- "s3-api.sjc-us-geo.objectstorage.service.networklayer.com"
  - US Cross Region San Jose Private Endpoint
- "s3.us-east.objectstorage.softlayer.net"
  - US Region East Endpoint
- "s3.us-east.objectstorage.service.networklayer.com"
  - US Region East Private Endpoint
- "s3.us-south.objectstorage.softlayer.net"
  - US Region South Endpoint
- "s3.us-south.objectstorage.service.networklayer.com"
  - US Region South Private Endpoint
- "s3.eu-geo.objectstorage.softlayer.net"
  - EU Cross Region Endpoint
- "s3.fra-eu-geo.objectstorage.softlayer.net"
  - EU Cross Region Frankfurt Endpoint
- "s3.mil-eu-geo.objectstorage.softlayer.net"
  - EU Cross Region Milan Endpoint
- "s3.ams-eu-geo.objectstorage.softlayer.net"
  - EU Cross Region Amsterdam Endpoint
- "s3.eu-geo.objectstorage.service.networklayer.com"
  - EU Cross Region Private Endpoint
- "s3.fra-eu-geo.objectstorage.service.networklayer.com"
  - EU Cross Region Frankfurt Private Endpoint
- "s3.mil-eu-geo.objectstorage.service.networklayer.com"
  - EU Cross Region Milan Private Endpoint
- "s3.ams-eu-geo.objectstorage.service.networklayer.com"
  - EU Cross Region Amsterdam Private Endpoint
- "s3.eu-gb.objectstorage.softlayer.net"
  - Great Britain Endpoint
- "s3.eu-gb.objectstorage.service.networklayer.com"
  - Great Britain Private Endpoint
- "s3.ap-geo.objectstorage.softlayer.net"
  - APAC Cross Regional Endpoint
- "s3.tok-ap-geo.objectstorage.softlayer.net"
  - APAC Cross Regional Tokyo Endpoint
- "s3.hkg-ap-geo.objectstorage.softlayer.net"
  - APAC Cross Regional HongKong Endpoint
- "s3.seo-ap-geo.objectstorage.softlayer.net"
  - APAC Cross Regional Seoul Endpoint
- "s3.ap-geo.objectstorage.service.networklayer.com"
  - APAC Cross Regional Private Endpoint
- "s3.tok-ap-geo.objectstorage.service.networklayer.com"
  - APAC Cross Regional Tokyo Private Endpoint
- "s3.hkg-ap-geo.objectstorage.service.networklayer.com"
  - APAC Cross Regional HongKong Private Endpoint
- "s3.seo-ap-geo.objectstorage.service.networklayer.com"
  - APAC Cross Regional Seoul Private Endpoint
- "s3.mel01.objectstorage.softlayer.net"
  - Melbourne Single Site Endpoint
- "s3.mel01.objectstorage.service.networklayer.com"
  - Melbourne Single Site Private Endpoint
- "s3.tor01.objectstorage.softlayer.net"
  - Toronto Single Site Endpoint
- "s3.tor01.objectstorage.service.networklayer.com"
  - Toronto Single Site Private Endpoint

--s3-endpoint

Endpoint for OSS API.

Config: endpoint
Env Var: RCLONE_S3_ENDPOINT
Type: string
Default: ""
Examples:
- "oss-cn-hangzhou.aliyuncs.com"
  - East China 1 (Hangzhou)
- "oss-cn-shanghai.aliyuncs.com"
  - East China 2 (Shanghai)
- "oss-cn-qingdao.aliyuncs.com"
  - North China 1 (Qingdao)
- "oss-cn-beijing.aliyuncs.com"
  - North China 2 (Beijing)
- "oss-cn-zhangjiakou.aliyuncs.com"
  - North China 3 (Zhangjiakou)
- "oss-cn-huhehaote.aliyuncs.com"
  - North China 5 (Huhehaote)
- "oss-cn-shenzhen.aliyuncs.com"
  - South China 1 (Shenzhen)
- "oss-cn-hongkong.aliyuncs.com"
  - Hong Kong (Hong Kong)
- "oss-us-west-1.aliyuncs.com"
  - US West 1 (Silicon Valley)
- "oss-us-east-1.aliyuncs.com"
  - US East 1 (Virginia)
- "oss-ap-southeast-1.aliyuncs.com"
  - Southeast Asia Southeast 1 (Singapore)
- "oss-ap-southeast-2.aliyuncs.com"
  - Asia Pacific Southeast 2 (Sydney)
- "oss-ap-southeast-3.aliyuncs.com"
  - Southeast Asia Southeast 3 (Kuala Lumpur)
- "oss-ap-southeast-5.aliyuncs.com"
  - Asia Pacific Southeast 5 (Jakarta)
- "oss-ap-northeast-1.aliyuncs.com"
  - Asia Pacific Northeast 1 (Japan)
- "oss-ap-south-1.aliyuncs.com"
  - Asia Pacific South 1 (Mumbai)
- "oss-eu-central-1.aliyuncs.com"
  - Central Europe 1 (Frankfurt)
- "oss-eu-west-1.aliyuncs.com"
  - West Europe (London)
- "oss-me-east-1.aliyuncs.com"
  - Middle East 1 (Dubai)

--s3-endpoint

Endpoint for S3 API. Required when using an S3 clone.

Config: endpoint
Env Var: RCLONE_S3_ENDPOINT
Type: string
Default: ""
Examples:
- "objects-us-east-1.dream.io"
  - Dream Objects endpoint
- "nyc3.digitaloceanspaces.com"
  - Digital Ocean Spaces New York 3
- "ams3.digitaloceanspaces.com"
  - Digital Ocean Spaces Amsterdam 3
- "sgp1.digitaloceanspaces.com"
  - Digital Ocean Spaces Singapore 1
- "s3.wasabisys.com"
  - Wasabi US East endpoint
- "s3.us-west-1.wasabisys.com"
  - Wasabi US West endpoint
- "s3.eu-central-1.wasabisys.com"
  - Wasabi EU Central endpoint

--s3-location-constraint

Location constraint - must be set to match the Region. Used when creating buckets only.

Config: location_constraint
Env Var: RCLONE_S3_LOCATION_CONSTRAINT
Type: string
Default: ""
Examples:
- ""
  - Empty for US Region, Northern Virginia or Pacific Northwest.
- "us-east-2"
  - US East (Ohio) Region.
- "us-west-2"
  - US West (Oregon) Region.
- "us-west-1"
  - US West (Northern California) Region.
- "ca-central-1"
  - Canada (Central) Region.
- "eu-west-1"
  - EU (Ireland) Region.
- "eu-west-2"
  - EU (London) Region.
- "eu-north-1"
  - EU (Stockholm) Region.
- "EU"
  - EU Region.
- "ap-southeast-1"
  - Asia Pacific (Singapore) Region.
- "ap-southeast-2"
  - Asia Pacific (Sydney) Region.
- "ap-northeast-1"
  - Asia Pacific (Tokyo) Region.
- "ap-northeast-2"
  - Asia Pacific (Seoul)
- "ap-south-1"
  - Asia Pacific (Mumbai)
- "sa-east-1"
  - South America (Sao Paulo) Region.

--s3-location-constraint

Location constraint - must match endpoint when using IBM Cloud Public. For on-prem COS, do not make a selection from this list, hit enter

Config: location_constraint
Env Var: RCLONE_S3_LOCATION_CONSTRAINT
Type: string
Default: ""
Examples:
- "us-standard"
  - US Cross Region Standard
- "us-vault"
  - US Cross Region Vault
- "us-cold"
  - US Cross Region Cold
- "us-flex"
  - US Cross Region Flex
- "us-east-standard"
  - US East Region Standard
- "us-east-vault"
  - US East Region Vault
- "us-east-cold"
  - US East Region Cold
- "us-east-flex"
  - US East Region Flex
- "us-south-standard"
  - US South Region Standard
- "us-south-vault"
  - US South Region Vault
- "us-south-cold"
  - US South Region Cold
- "us-south-flex"
  - US South Region Flex
- "eu-standard"
  - EU Cross Region Standard
- "eu-vault"
  - EU Cross Region Vault
- "eu-cold"
  - EU Cross Region Cold
- "eu-flex"
  - EU Cross Region Flex
- "eu-gb-standard"
  - Great Britain Standard
- "eu-gb-vault"
  - Great Britain Vault
- "eu-gb-cold"
  - Great Britain Cold
- "eu-gb-flex"
  - Great Britain Flex
- "ap-standard"
  - APAC Standard
- "ap-vault"
  - APAC Vault
- "ap-cold"
  - APAC Cold
- "ap-flex"
  - APAC Flex
- "mel01-standard"
  - Melbourne Standard
- "mel01-vault"
  - Melbourne Vault
- "mel01-cold"
  - Melbourne Cold
- "mel01-flex"
  - Melbourne Flex
- "tor01-standard"
  - Toronto Standard
- "tor01-vault"
  - Toronto Vault
- "tor01-cold"
  - Toronto Cold
- "tor01-flex"
  - Toronto Flex

--s3-location-constraint

Location constraint - must be set to match the Region. Leave blank if not sure. Used when creating buckets only.

Config: location_constraint
Env Var: RCLONE_S3_LOCATION_CONSTRAINT
Type: string
Default: ""

--s3-acl

Canned ACL used when creating buckets and storing or copying objects.

This ACL is used for creating objects and if bucket_acl isn't set, for creating buckets too.

For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl

Note that this ACL is applied when server side copying objects as S3 doesn't copy the ACL from the source but rather writes a fresh one.

Config: acl
Env Var: RCLONE_S3_ACL
Type: string
Default: ""
Examples:
- "private"
  - Owner gets FULL_CONTROL. No one else has access rights (default).
- "public-read"
  - Owner gets FULL_CONTROL. The AllUsers group gets READ access.
- "public-read-write"
  - Owner gets FULL_CONTROL. The AllUsers group gets READ and WRITE access.
  - Granting this on a bucket is generally not recommended.
- "authenticated-read"
  - Owner gets FULL_CONTROL. The AuthenticatedUsers group gets READ access.
- "bucket-owner-read"
  - Object owner gets FULL_CONTROL. Bucket owner gets READ access.
  - If you specify this canned ACL when creating a bucket, Amazon S3 ignores it.
- "bucket-owner-full-control"
  - Both the object owner and the bucket owner get FULL_CONTROL over the object.
  - If you specify this canned ACL when creating a bucket, Amazon S3 ignores it.
- "private"
  - Owner gets FULL_CONTROL. No one else has access rights (default). This acl is available on IBM Cloud (Infra), IBM Cloud (Storage), On-Premise COS
- "public-read"
  - Owner gets FULL_CONTROL. The AllUsers group gets READ access. This acl is available on IBM Cloud (Infra), IBM Cloud (Storage), On-Premise IBM COS
- "public-read-write"
  - Owner gets FULL_CONTROL. The AllUsers group gets READ and WRITE access. This acl is available on IBM Cloud (Infra), On-Premise IBM COS
- "authenticated-read"
  - Owner gets FULL_CONTROL. The AuthenticatedUsers group gets READ access. Not supported on Buckets. This acl is available on IBM Cloud (Infra) and On-Premise IBM COS

--s3-server-side-encryption

The server-side encryption algorithm used when storing this object in S3.

Config: server_side_encryption
Env Var: RCLONE_S3_SERVER_SIDE_ENCRYPTION
Type: string
Default: ""
Examples:
- ""
  - None
- "AES256"
  - AES256
- "aws:kms"
  - aws:kms

--s3-sse-kms-key-id

If using KMS ID you must provide the ARN of Key.

Config: sse_kms_key_id
Env Var: RCLONE_S3_SSE_KMS_KEY_ID
Type: string
Default: ""
Examples:
- ""
  - None
- "arn:aws:kms:us-east-1:*"
  - arn:aws:kms:*

--s3-storage-class

The storage class to use when storing new objects in S3.

Config: storage_class
Env Var: RCLONE_S3_STORAGE_CLASS
Type: string
Default: ""
Examples:
- ""
  - Default
- "STANDARD"
  - Standard storage class
- "REDUCED_REDUNDANCY"
  - Reduced redundancy storage class
- "STANDARD_IA"
  - Standard Infrequent Access storage class
- "ONEZONE_IA"
  - One Zone Infrequent Access storage class
- "GLACIER"
  - Glacier storage class
- "DEEP_ARCHIVE"
  - Glacier Deep Archive storage class
- "INTELLIGENT_TIERING"
  - Intelligent-Tiering storage class

--s3-storage-class

The storage class to use when storing new objects in OSS.

Config: storage_class
Env Var: RCLONE_S3_STORAGE_CLASS
Type: string
Default: ""
Examples:
- ""
  - Default
- "STANDARD"
  - Standard storage class
- "GLACIER"
  - Archive storage mode.
- "STANDARD_IA"
  - Infrequent access storage mode.

Advanced Options

Here are the advanced options specific to s3 (Amazon S3 Compliant Storage Provider (AWS, Alibaba, Ceph, Digital Ocean, Dreamhost, IBM COS, Minio, etc)).

--s3-bucket-acl

Canned ACL used when creating buckets.

For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl

Note that this ACL is applied when only when creating buckets. If it isn't set then "acl" is used instead.

Config: bucket_acl
Env Var: RCLONE_S3_BUCKET_ACL
Type: string
Default: ""
Examples:
- "private"
  - Owner gets FULL_CONTROL. No one else has access rights (default).
- "public-read"
  - Owner gets FULL_CONTROL. The AllUsers group gets READ access.
- "public-read-write"
  - Owner gets FULL_CONTROL. The AllUsers group gets READ and WRITE access.
  - Granting this on a bucket is generally not recommended.
- "authenticated-read"
  - Owner gets FULL_CONTROL. The AuthenticatedUsers group gets READ access.

--s3-upload-cutoff

Cutoff for switching to chunked upload

Any files larger than this will be uploaded in chunks of chunk_size. The minimum is 0 and the maximum is 5GB.

Config: upload_cutoff
Env Var: RCLONE_S3_UPLOAD_CUTOFF
Type: SizeSuffix
Default: 200M

--s3-chunk-size

Chunk size to use for uploading.

When uploading files larger than upload_cutoff they will be uploaded as multipart uploads using this chunk size.

Note that "--s3-upload-concurrency" chunks of this size are buffered in memory per transfer.

If you are transferring large files over high speed links and you have enough memory, then increasing this will speed up the transfers.

Config: chunk_size
Env Var: RCLONE_S3_CHUNK_SIZE
Type: SizeSuffix
Default: 5M

--s3-disable-checksum

Don't store MD5 checksum with object metadata

Config: disable_checksum
Env Var: RCLONE_S3_DISABLE_CHECKSUM
Type: bool
Default: false

--s3-session-token

An AWS session token

Config: session_token
Env Var: RCLONE_S3_SESSION_TOKEN
Type: string
Default: ""

--s3-upload-concurrency

Concurrency for multipart uploads.

This is the number of chunks of the same file that are uploaded concurrently.

If you are uploading small numbers of large file over high speed link and these uploads do not fully utilize your bandwidth, then increasing this may help to speed up the transfers.

Config: upload_concurrency
Env Var: RCLONE_S3_UPLOAD_CONCURRENCY
Type: int
Default: 4

--s3-force-path-style

If true use path style access if false use virtual hosted style.

If this is true (the default) then rclone will use path style access, if false then rclone will use virtual path style. See the AWS S3 docs for more info.

Some providers (eg Aliyun OSS or Netease COS) require this set to false.

Config: force_path_style
Env Var: RCLONE_S3_FORCE_PATH_STYLE
Type: bool
Default: true

--s3-v2-auth

If true use v2 authentication.

If this is false (the default) then rclone will use v4 authentication. If it is set then rclone will use v2 authentication.

Use this only if v4 signatures don't work, eg pre Jewel/v10 CEPH.

Config: v2_auth
Env Var: RCLONE_S3_V2_AUTH
Type: bool
Default: false

--s3-use-accelerate-endpoint

If true use the AWS S3 accelerated endpoint.

See: AWS S3 Transfer acceleration

Config: use_accelerate_endpoint
Env Var: RCLONE_S3_USE_ACCELERATE_ENDPOINT
Type: bool
Default: false

Anonymous access to public buckets

If you want to use rclone to access a public bucket, configure with a blank access_key_id and secret_access_key. Your config should end up looking like this:

[anons3]
type = s3
provider = AWS
env_auth = false
access_key_id = 
secret_access_key = 
region = us-east-1
endpoint = 
location_constraint = 
acl = private
server_side_encryption = 
storage_class =

Then use it as normal with the name of the public bucket, eg

rclone lsd anons3:1000genomes

You will be able to list and copy data but not upload it.

Ceph

Ceph is an open source unified, distributed storage system designed for excellent performance, reliability and scalability. It has an S3 compatible object storage interface.

To use rclone with Ceph, configure as above but leave the region blank and set the endpoint. You should end up with something like this in your config:

[ceph]
type = s3
provider = Ceph
env_auth = false
access_key_id = XXX
secret_access_key = YYY
region =
endpoint = https://ceph.endpoint.example.com
location_constraint =
acl =
server_side_encryption =
storage_class =

If you are using an older version of CEPH, eg 10.2.x Jewel, then you may need to supply the parameter --s3-upload-cutoff 0 or put this in the config file as upload_cutoff 0 to work around a bug which causes uploading of small files to fail.

Note also that Ceph sometimes puts / in the passwords it gives users. If you read the secret access key using the command line tools you will get a JSON blob with the / escaped as \/. Make sure you only write / in the secret access key.

Eg the dump from Ceph looks something like this (irrelevant keys removed).

{
    "user_id": "xxx",
    "display_name": "xxxx",
    "keys": [
        {
            "user": "xxx",
            "access_key": "xxxxxx",
            "secret_key": "xxxxxx\/xxxx"
        }
    ],
}

Because this is a json dump, it is encoding the / as \/, so if you use the secret key as xxxxxx/xxxx it will work fine.

Dreamhost

Dreamhost DreamObjects is an object storage system based on CEPH.

To use rclone with Dreamhost, configure as above but leave the region blank and set the endpoint. You should end up with something like this in your config:

[dreamobjects]
type = s3
provider = DreamHost
env_auth = false
access_key_id = your_access_key
secret_access_key = your_secret_key
region =
endpoint = objects-us-west-1.dream.io
location_constraint =
acl = private
server_side_encryption =
storage_class =

DigitalOcean Spaces

Spaces is an S3-interoperable object storage service from cloud provider DigitalOcean.

To connect to DigitalOcean Spaces you will need an access key and secret key. These can be retrieved on the "Applications & API" page of the DigitalOcean control panel. They will be needed when promted by rclone config for your access_key_id and secret_access_key.

When prompted for a region or location_constraint, press enter to use the default value. The region must be included in the endpoint setting (e.g. nyc3.digitaloceanspaces.com). The default values can be used for other settings.

Going through the whole process of creating a new remote by running rclone config, each prompt should be answered as shown below:

Storage> s3
env_auth> 1
access_key_id> YOUR_ACCESS_KEY
secret_access_key> YOUR_SECRET_KEY
region>
endpoint> nyc3.digitaloceanspaces.com
location_constraint>
acl>
storage_class>

The resulting configuration file should look like:

[spaces]
type = s3
provider = DigitalOcean
env_auth = false
access_key_id = YOUR_ACCESS_KEY
secret_access_key = YOUR_SECRET_KEY
region =
endpoint = nyc3.digitaloceanspaces.com
location_constraint =
acl =
server_side_encryption =
storage_class =

Once configured, you can create a new Space and begin copying files. For example:

rclone mkdir spaces:my-new-space
rclone copy /path/to/files spaces:my-new-space

IBM COS (S3)

Information stored with IBM Cloud Object Storage is encrypted and dispersed across multiple geographic locations, and accessed through an implementation of the S3 API. This service makes use of the distributed storage technologies provided by IBM’s Cloud Object Storage System (formerly Cleversafe). For more information visit: (http://www.ibm.com/cloud/object-storage)

To configure access to IBM COS S3, follow the steps below:

Run rclone config and select n for a new remote.

	2018/02/14 14:13:11 NOTICE: Config file "C:\\Users\\a\\.config\\rclone\\rclone.conf" not found - using defaults
	No remotes found - make a new one
	n) New remote
	s) Set configuration password
	q) Quit config
	n/s/q> n

Enter the name for the configuration

	name> <YOUR NAME>

Select "s3" storage.

Choose a number from below, or type in your own value
 	1 / Alias for an existing remote
   	\ "alias"
 	2 / Amazon Drive
   	\ "amazon cloud drive"
 	3 / Amazon S3 Complaint Storage Providers (Dreamhost, Ceph, Minio, IBM COS)
   	\ "s3"
 	4 / Backblaze B2
   	\ "b2"
[snip]
	23 / http Connection
    \ "http"
Storage> 3

Select IBM COS as the S3 Storage Provider.

Choose the S3 provider.
Choose a number from below, or type in your own value
	 1 / Choose this option to configure Storage to AWS S3
	   \ "AWS"
 	 2 / Choose this option to configure Storage to Ceph Systems
  	 \ "Ceph"
	 3 /  Choose this option to configure Storage to Dreamhost
     \ "Dreamhost"
   4 / Choose this option to the configure Storage to IBM COS S3
   	 \ "IBMCOS"
 	 5 / Choose this option to the configure Storage to Minio
     \ "Minio"
	 Provider>4

Enter the Access Key and Secret.

	AWS Access Key ID - leave blank for anonymous access or runtime credentials.
	access_key_id> <>
	AWS Secret Access Key (password) - leave blank for anonymous access or runtime credentials.
	secret_access_key> <>

Specify the endpoint for IBM COS. For Public IBM COS, choose from the option below. For On Premise IBM COS, enter an enpoint address.

	Endpoint for IBM COS S3 API.
	Specify if using an IBM COS On Premise.
	Choose a number from below, or type in your own value
	 1 / US Cross Region Endpoint
   	   \ "s3-api.us-geo.objectstorage.softlayer.net"
	 2 / US Cross Region Dallas Endpoint
   	   \ "s3-api.dal.us-geo.objectstorage.softlayer.net"
 	 3 / US Cross Region Washington DC Endpoint
   	   \ "s3-api.wdc-us-geo.objectstorage.softlayer.net"
	 4 / US Cross Region San Jose Endpoint
	   \ "s3-api.sjc-us-geo.objectstorage.softlayer.net"
	 5 / US Cross Region Private Endpoint
	   \ "s3-api.us-geo.objectstorage.service.networklayer.com"
	 6 / US Cross Region Dallas Private Endpoint
	   \ "s3-api.dal-us-geo.objectstorage.service.networklayer.com"
	 7 / US Cross Region Washington DC Private Endpoint
	   \ "s3-api.wdc-us-geo.objectstorage.service.networklayer.com"
	 8 / US Cross Region San Jose Private Endpoint
	   \ "s3-api.sjc-us-geo.objectstorage.service.networklayer.com"
	 9 / US Region East Endpoint
	   \ "s3.us-east.objectstorage.softlayer.net"
	10 / US Region East Private Endpoint
	   \ "s3.us-east.objectstorage.service.networklayer.com"
	11 / US Region South Endpoint
[snip]
	34 / Toronto Single Site Private Endpoint
	   \ "s3.tor01.objectstorage.service.networklayer.com"
	endpoint>1

Specify a IBM COS Location Constraint. The location constraint must match endpoint when using IBM Cloud Public. For on-prem COS, do not make a selection from this list, hit enter

	 1 / US Cross Region Standard
	   \ "us-standard"
	 2 / US Cross Region Vault
	   \ "us-vault"
	 3 / US Cross Region Cold
	   \ "us-cold"
	 4 / US Cross Region Flex
	   \ "us-flex"
	 5 / US East Region Standard
	   \ "us-east-standard"
	 6 / US East Region Vault
	   \ "us-east-vault"
	 7 / US East Region Cold
	   \ "us-east-cold"
	 8 / US East Region Flex
	   \ "us-east-flex"
	 9 / US South Region Standard
	   \ "us-south-standard"
	10 / US South Region Vault
	   \ "us-south-vault"
[snip]
	32 / Toronto Flex
	   \ "tor01-flex"
location_constraint>1

Specify a canned ACL. IBM Cloud (Strorage) supports "public-read" and "private". IBM Cloud(Infra) supports all the canned ACLs. On-Premise COS supports all the canned ACLs.

Canned ACL used when creating buckets and/or storing objects in S3.
For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl
Choose a number from below, or type in your own value
      1 / Owner gets FULL_CONTROL. No one else has access rights (default). This acl is available on IBM Cloud (Infra), IBM Cloud (Storage), On-Premise COS
      \ "private"
      2  / Owner gets FULL_CONTROL. The AllUsers group gets READ access. This acl is available on IBM Cloud (Infra), IBM Cloud (Storage), On-Premise IBM COS
      \ "public-read"
      3 / Owner gets FULL_CONTROL. The AllUsers group gets READ and WRITE access. This acl is available on IBM Cloud (Infra), On-Premise IBM COS
      \ "public-read-write"
      4  / Owner gets FULL_CONTROL. The AuthenticatedUsers group gets READ access. Not supported on Buckets. This acl is available on IBM Cloud (Infra) and On-Premise IBM COS
      \ "authenticated-read"
acl> 1

Review the displayed configuration and accept to save the "remote" then quit. The config file should look like this

	[xxx]
	type = s3
	Provider = IBMCOS
	access_key_id = xxx
	secret_access_key = yyy
	endpoint = s3-api.us-geo.objectstorage.softlayer.net
	location_constraint = us-standard
	acl = private

Execute rclone commands

	1)	Create a bucket.
		rclone mkdir IBM-COS-XREGION:newbucket
	2)	List available buckets.
		rclone lsd IBM-COS-XREGION:
		-1 2017-11-08 21:16:22        -1 test
		-1 2018-02-14 20:16:39        -1 newbucket
	3)	List contents of a bucket.
		rclone ls IBM-COS-XREGION:newbucket
		18685952 test.exe
	4)	Copy a file from local to remote.
		rclone copy /Users/file.txt IBM-COS-XREGION:newbucket
	5)	Copy a file from remote to local.
		rclone copy IBM-COS-XREGION:newbucket/file.txt .
	6)	Delete a file on remote.
		rclone delete IBM-COS-XREGION:newbucket/file.txt

Minio

Minio is an object storage server built for cloud application developers and devops.

It is very easy to install and provides an S3 compatible server which can be used by rclone.

To use it, install Minio following the instructions here.

When it configures itself Minio will print something like this

Endpoint:  http://192.168.1.106:9000  http://172.23.0.1:9000
AccessKey: USWUXHGYZQYFYFFIT3RE
SecretKey: MOJRH0mkL1IPauahWITSVvyDrQbEEIwljvmxdq03
Region:    us-east-1
SQS ARNs:  arn:minio:sqs:us-east-1:1:redis arn:minio:sqs:us-east-1:2:redis

Browser Access:
   http://192.168.1.106:9000  http://172.23.0.1:9000

Command-line Access: https://docs.minio.io/docs/minio-client-quickstart-guide
   $ mc config host add myminio http://192.168.1.106:9000 USWUXHGYZQYFYFFIT3RE MOJRH0mkL1IPauahWITSVvyDrQbEEIwljvmxdq03

Object API (Amazon S3 compatible):
   Go:         https://docs.minio.io/docs/golang-client-quickstart-guide
   Java:       https://docs.minio.io/docs/java-client-quickstart-guide
   Python:     https://docs.minio.io/docs/python-client-quickstart-guide
   JavaScript: https://docs.minio.io/docs/javascript-client-quickstart-guide
   .NET:       https://docs.minio.io/docs/dotnet-client-quickstart-guide

Drive Capacity: 26 GiB Free, 165 GiB Total

These details need to go into rclone config like this. Note that it is important to put the region in as stated above.

env_auth> 1
access_key_id> USWUXHGYZQYFYFFIT3RE
secret_access_key> MOJRH0mkL1IPauahWITSVvyDrQbEEIwljvmxdq03
region> us-east-1
endpoint> http://192.168.1.106:9000
location_constraint>
server_side_encryption>

Which makes the config file look like this

[minio]
type = s3
provider = Minio
env_auth = false
access_key_id = USWUXHGYZQYFYFFIT3RE
secret_access_key = MOJRH0mkL1IPauahWITSVvyDrQbEEIwljvmxdq03
region = us-east-1
endpoint = http://192.168.1.106:9000
location_constraint =
server_side_encryption =

So once set up, for example to copy files into a bucket

rclone copy /path/to/files minio:bucket

Scaleway

Scaleway The Object Storage platform allows you to store anything from backups, logs and web assets to documents and photos. Files can be dropped from the Scaleway console or transferred through our API and CLI or using any S3-compatible tool.

Scaleway provides an S3 interface which can be configured for use with rclone like this:

[scaleway]
type = s3
env_auth = false
endpoint = s3.nl-ams.scw.cloud
access_key_id = SCWXXXXXXXXXXXXXX
secret_access_key = 1111111-2222-3333-44444-55555555555555
region = nl-ams
location_constraint =
acl = private
force_path_style = false
server_side_encryption =
storage_class =

Wasabi

Wasabi is a cloud-based object storage service for a broad range of applications and use cases. Wasabi is designed for individuals and organizations that require a high-performance, reliable, and secure data storage infrastructure at minimal cost.

Wasabi provides an S3 interface which can be configured for use with rclone like this.

No remotes found - make a new one
n) New remote
s) Set configuration password
n/s> n
name> wasabi
Type of storage to configure.
Choose a number from below, or type in your own value
[snip]
XX / Amazon S3 (also Dreamhost, Ceph, Minio)
   \ "s3"
[snip]
Storage> s3
Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars). Only applies if access_key_id and secret_access_key is blank.
Choose a number from below, or type in your own value
 1 / Enter AWS credentials in the next step
   \ "false"
 2 / Get AWS credentials from the environment (env vars or IAM)
   \ "true"
env_auth> 1
AWS Access Key ID - leave blank for anonymous access or runtime credentials.
access_key_id> YOURACCESSKEY
AWS Secret Access Key (password) - leave blank for anonymous access or runtime credentials.
secret_access_key> YOURSECRETACCESSKEY
Region to connect to.
Choose a number from below, or type in your own value
   / The default endpoint - a good choice if you are unsure.
 1 | US Region, Northern Virginia or Pacific Northwest.
   | Leave location constraint empty.
   \ "us-east-1"
[snip]
region> us-east-1
Endpoint for S3 API.
Leave blank if using AWS to use the default endpoint for the region.
Specify if using an S3 clone such as Ceph.
endpoint> s3.wasabisys.com
Location constraint - must be set to match the Region. Used when creating buckets only.
Choose a number from below, or type in your own value
 1 / Empty for US Region, Northern Virginia or Pacific Northwest.
   \ ""
[snip]
location_constraint>
Canned ACL used when creating buckets and/or storing objects in S3.
For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl
Choose a number from below, or type in your own value
 1 / Owner gets FULL_CONTROL. No one else has access rights (default).
   \ "private"
[snip]
acl>
The server-side encryption algorithm used when storing this object in S3.
Choose a number from below, or type in your own value
 1 / None
   \ ""
 2 / AES256
   \ "AES256"
server_side_encryption>
The storage class to use when storing objects in S3.
Choose a number from below, or type in your own value
 1 / Default
   \ ""
 2 / Standard storage class
   \ "STANDARD"
 3 / Reduced redundancy storage class
   \ "REDUCED_REDUNDANCY"
 4 / Standard Infrequent Access storage class
   \ "STANDARD_IA"
storage_class>
Remote config
--------------------
[wasabi]
env_auth = false
access_key_id = YOURACCESSKEY
secret_access_key = YOURSECRETACCESSKEY
region = us-east-1
endpoint = s3.wasabisys.com
location_constraint =
acl =
server_side_encryption =
storage_class =
--------------------
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y

This will leave the config file looking like this.

[wasabi]
type = s3
provider = Wasabi
env_auth = false
access_key_id = YOURACCESSKEY
secret_access_key = YOURSECRETACCESSKEY
region =
endpoint = s3.wasabisys.com
location_constraint =
acl =
server_side_encryption =
storage_class =

Alibaba OSS

Here is an example of making an Alibaba Cloud (Aliyun) OSS configuration. First run:

rclone config

This will guide you through an interactive setup process.

No remotes found - make a new one
n) New remote
s) Set configuration password
q) Quit config
n/s/q> n
name> oss
Type of storage to configure.
Enter a string value. Press Enter for the default ("").
Choose a number from below, or type in your own value
[snip]
 4 / Amazon S3 Compliant Storage Provider (AWS, Alibaba, Ceph, Digital Ocean, Dreamhost, IBM COS, Minio, etc)
   \ "s3"
[snip]
Storage> s3
Choose your S3 provider.
Enter a string value. Press Enter for the default ("").
Choose a number from below, or type in your own value
 1 / Amazon Web Services (AWS) S3
   \ "AWS"
 2 / Alibaba Cloud Object Storage System (OSS) formerly Aliyun
   \ "Alibaba"
 3 / Ceph Object Storage
   \ "Ceph"
[snip]
provider> Alibaba
Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars).
Only applies if access_key_id and secret_access_key is blank.
Enter a boolean value (true or false). Press Enter for the default ("false").
Choose a number from below, or type in your own value
 1 / Enter AWS credentials in the next step
   \ "false"
 2 / Get AWS credentials from the environment (env vars or IAM)
   \ "true"
env_auth> 1
AWS Access Key ID.
Leave blank for anonymous access or runtime credentials.
Enter a string value. Press Enter for the default ("").
access_key_id> accesskeyid
AWS Secret Access Key (password)
Leave blank for anonymous access or runtime credentials.
Enter a string value. Press Enter for the default ("").
secret_access_key> secretaccesskey
Endpoint for OSS API.
Enter a string value. Press Enter for the default ("").
Choose a number from below, or type in your own value
 1 / East China 1 (Hangzhou)
   \ "oss-cn-hangzhou.aliyuncs.com"
 2 / East China 2 (Shanghai)
   \ "oss-cn-shanghai.aliyuncs.com"
 3 / North China 1 (Qingdao)
   \ "oss-cn-qingdao.aliyuncs.com"
[snip]
endpoint> 1
Canned ACL used when creating buckets and storing or copying objects.

Note that this ACL is applied when server side copying objects as S3
doesn't copy the ACL from the source but rather writes a fresh one.
Enter a string value. Press Enter for the default ("").
Choose a number from below, or type in your own value
 1 / Owner gets FULL_CONTROL. No one else has access rights (default).
   \ "private"
 2 / Owner gets FULL_CONTROL. The AllUsers group gets READ access.
   \ "public-read"
   / Owner gets FULL_CONTROL. The AllUsers group gets READ and WRITE access.
[snip]
acl> 1
The storage class to use when storing new objects in OSS.
Enter a string value. Press Enter for the default ("").
Choose a number from below, or type in your own value
 1 / Default
   \ ""
 2 / Standard storage class
   \ "STANDARD"
 3 / Archive storage mode.
   \ "GLACIER"
 4 / Infrequent access storage mode.
   \ "STANDARD_IA"
storage_class> 1
Edit advanced config? (y/n)
y) Yes
n) No
y/n> n
Remote config
--------------------
[oss]
type = s3
provider = Alibaba
env_auth = false
access_key_id = accesskeyid
secret_access_key = secretaccesskey
endpoint = oss-cn-hangzhou.aliyuncs.com
acl = private
storage_class = Standard
--------------------
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y

Netease NOS

For Netease NOS configure as per the configurator rclone config setting the provider Netease. This will automatically set force_path_style = false which is necessary for it to run properly.

55 KiB Raw Blame History

Amazon S3 Storage Providers

AWS S3

--fast-list

--update and --use-server-modtime

Modified time

Restricted filename characters

Multipart uploads

Buckets and Regions

Authentication

S3 Permissions

Key Management System (KMS)

Glacier and Glacier Deep Archive

Standard Options

--s3-provider

--s3-env-auth

--s3-access-key-id

--s3-secret-access-key

--s3-region

--s3-region

--s3-endpoint

--s3-endpoint

--s3-endpoint

--s3-endpoint

--s3-location-constraint

--s3-location-constraint

--s3-location-constraint

--s3-acl

--s3-server-side-encryption

--s3-sse-kms-key-id

--s3-storage-class

--s3-storage-class

Advanced Options

--s3-bucket-acl

--s3-upload-cutoff

--s3-chunk-size

--s3-disable-checksum

--s3-session-token

--s3-upload-concurrency

--s3-force-path-style

--s3-v2-auth

--s3-use-accelerate-endpoint

Anonymous access to public buckets

Ceph

Dreamhost

DigitalOcean Spaces

IBM COS (S3)

Minio

Scaleway

Wasabi

Alibaba OSS

Netease NOS

55 KiB

Raw Blame History