forked from TrueCloudLab/frostfs-s3-gw
426 lines
21 KiB
Markdown
426 lines
21 KiB
Markdown
# Configuration
|
|
|
|
There are three ways to configure the S3 GW:
|
|
|
|
1. CLI parameters
|
|
2. YAML file
|
|
3. Environment variables
|
|
|
|
Everything available as a CLI parameter can also be specified via environment variables and almost everything can be
|
|
specified via `.yaml` configuration file.
|
|
|
|
But **not vice versa**, some parameters can be configured only with environment variables/configuration file.
|
|
Most of these parameters have default values, therefore, these ways to configure the gateway are optional and
|
|
basic configuration can be completed with CLI parameters only.
|
|
|
|
1. [CLI parameters](#cli-parameters)
|
|
1. [Nodes and weights](#nodes-and-weights)
|
|
2. [Wallet](#wallet)
|
|
3. [Binding and TLS](#listening-on-address-and-TLS)
|
|
4. [RPC endpoint and resolving of bucket names](#rpc-endpoint-and-resolving-of-bucket-names)
|
|
5. [Processing of requests](#processing-of-requests)
|
|
6. [Connection to NeoFS](#connection-to-NeoFS)
|
|
7. [Monitoring and metrics](#monitoring-and-metrics)
|
|
2. [YAML file and environment variables](#yaml-file-and-environment-variables)
|
|
1. [Configuration file](#neofs-s3-gateway-configuration-file)
|
|
|
|
## CLI parameters
|
|
|
|
### Nodes and weights
|
|
|
|
You can specify multiple `-p` options to add more NeoFS nodes; this will make
|
|
a gateway spread requests equally among them (using weight 1 for every node):
|
|
|
|
```shell
|
|
$ neofs-s3-gw -p 192.168.130.72:8080 -p 192.168.130.71:8080
|
|
```
|
|
|
|
If you want some specific load distribution proportions, use weights and priorities, they
|
|
can only be specified via environment variables or a configuration file.
|
|
|
|
### Wallet
|
|
|
|
Wallet (`--wallet`) is a mandatory parameter. It is a path to a wallet file. You can provide a passphrase to decrypt
|
|
a wallet via env variable or conf file, or you will be asked to enter a password interactively.
|
|
You can also specify an account address to use from a wallet using the `--address` parameter.
|
|
|
|
### Listening on address and TLS
|
|
|
|
You can make the gateway listen on specific address using the `--listen_address` option.
|
|
|
|
It can also provide TLS interface for its users, just specify paths to the key and
|
|
certificate files via `--tls.key_file` and `--tls.cert_file` parameters. Note
|
|
that using these options makes gateway TLS-only. If you need to serve both TLS
|
|
and plain text, you either have to run two gateway instances or use some
|
|
external redirecting solution.
|
|
|
|
Example to bind to `192.168.130.130:443` and serve TLS there (keys and nodes are
|
|
omitted):
|
|
|
|
```shell
|
|
$ neofs-s3-gw --listen_address 192.168.130.130:443 \
|
|
--tls.key_file=key.pem --tls.cert_file=cert.pem
|
|
```
|
|
|
|
### RPC endpoint and resolving of bucket names
|
|
|
|
To set RPC endpoint specify a value of parameter `-r` or `--rpc_endpoint`. The parameter is **required if** another
|
|
parameter's `--resolve_order` value contains `nns`.
|
|
|
|
```shell
|
|
$ neofs-s3-gw --rpc_endpoint http://morph-chain.neofs.devenv:30333/ --resolve_order nns,dns
|
|
```
|
|
|
|
### Processing of requests
|
|
|
|
Maximum number of clients whose requests can be handled by the gateway can be specified by the value of
|
|
`--max_clients_count` parameter.
|
|
`--max_clients_deadline` defines deadline after which the gate sends error `RequestTimeout` to a client.
|
|
|
|
```shell
|
|
$ neofs-s3-gw --max_clients_count 150 --max_clients_deadline 1m
|
|
```
|
|
|
|
### Connection to NeoFS
|
|
|
|
Timeout to connect to NeoFS nodes can be set with `--connect_timeout`
|
|
and timeout to check node health during rebalance`--healthcheck_timeout`.
|
|
|
|
Also, interval to check node health can be specified by `--rebalance_interval` value.
|
|
|
|
```shell
|
|
$ neofs-s3-gw --healthcheck_timeout 15s --connect_timeout 1m --rebalance_interval 1h
|
|
```
|
|
|
|
### Monitoring and metrics
|
|
|
|
Pprof and Prometheus are integrated into the gateway. To enable them, use `--pprof` and `--metrics` flags or
|
|
`S3_GW_PPROF`/`S3_GW_METRICS` environment variables.
|
|
|
|
## YAML file and environment variables
|
|
|
|
Example of a YAML configuration file: [yaml-example](/config/config.yaml)
|
|
Examples of environment variables: [env-example](/config/config.env).
|
|
|
|
A path to a configuration file can be specified with `--config` parameter:
|
|
|
|
```shell
|
|
$ neofs-s3-gw --config your-config.yaml
|
|
```
|
|
|
|
### Reload on SIGHUP
|
|
|
|
Some config values can be reloaded on SIGHUP signal.
|
|
Such parameters have special mark in tables below.
|
|
|
|
You can send SIGHUP signal to app using the following command:
|
|
|
|
```shell
|
|
$ kill -s SIGHUP <app_pid>
|
|
```
|
|
|
|
Example:
|
|
|
|
```shell
|
|
$ ./bin/neofs-s3-gw --config config.yaml &> s3.log &
|
|
[1] 998346
|
|
|
|
$ cat s3.log
|
|
# ...
|
|
2022-09-30T17:38:22.338+0300 info s3-gw/app.go:371 application started {"name": "neofs-s3-gw", "version": "v0.24.0"}
|
|
# ...
|
|
|
|
$ kill -s SIGHUP 998346
|
|
|
|
$ cat s3.log
|
|
# ...
|
|
2022-09-30T17:38:40.909+0300 info s3-gw/app.go:491 SIGHUP config reload completed
|
|
```
|
|
|
|
### NeoFS S3 Gateway configuration file
|
|
|
|
This section contains detailed NeoFS S3 Gateway configuration file description
|
|
including default config values and some tips to set up configurable values.
|
|
|
|
There are some custom types used for brevity:
|
|
|
|
* `duration` -- string consisting of a number and a suffix. Suffix examples include `s` (seconds), `m` (minutes), `ms` (
|
|
milliseconds).
|
|
|
|
### Structure
|
|
|
|
| Section | Description |
|
|
|--------------|---------------------------------------------------|
|
|
| no section | [General parameters](#general-section) |
|
|
| `wallet` | [Wallet configuration](#wallet-section) |
|
|
| `peers` | [Nodes configuration](#peers-section) |
|
|
| `tls` | [TLS configuration](#tls-section) |
|
|
| `logger` | [Logger configuration](#logger-section) |
|
|
| `tree` | [Tree configuration](#tree-section) |
|
|
| `cache` | [Cache configuration](#cache-section) |
|
|
| `nats` | [NATS configuration](#nats-section) |
|
|
| `cors` | [CORS configuration](#cors-section) |
|
|
| `pprof` | [Pprof configuration](#pprof-section) |
|
|
| `prometheus` | [Prometheus configuration](#prometheus-section) |
|
|
| `neofs` | [Parameters of requests to NeoFS](#neofs-section) |
|
|
|
|
### General section
|
|
|
|
```yaml
|
|
listen_address: 0.0.0.0:8084
|
|
|
|
listen_domains:
|
|
- s3dev.neofs.devenv
|
|
- s3dev2.neofs.devenv
|
|
|
|
rpc_endpoint: http://morph-chain.neofs.devenv:30333
|
|
resolve_order:
|
|
- nns
|
|
- dns
|
|
|
|
connect_timeout: 10s
|
|
stream_timeout: 10s
|
|
healthcheck_timeout: 15s
|
|
rebalance_interval: 60s
|
|
pool_error_threshold: 100
|
|
|
|
max_clients_count: 100
|
|
max_clients_deadline: 30s
|
|
|
|
default_policy: REP 3
|
|
|
|
allowed_access_key_id_prefixes:
|
|
- Ck9BHsgKcnwfCTUSFm6pxhoNS4cBqgN2NQ8zVgPjqZDX
|
|
- 3stjWenX15YwYzczMr88gy3CQr4NYFBQ8P7keGzH5QFn
|
|
```
|
|
|
|
| Parameter | Type | SIGHUP reload | Default value | Description |
|
|
|----------------------------------|------------|---------------|----------------|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
|
|
| `listen_address` | `string` | | `0.0.0.0:8080` | The address that the gateway is listening on. |
|
|
| `listen_domains` | `[]string` | | | Domains to be able to use virtual-hosted-style access to bucket. |
|
|
| `rpc_endpoint` | `string` | yes | | The address of the RPC host to which the gateway connects to resolve bucket names (required to use the `nns` resolver). |
|
|
| `resolve_order` | `[]string` | yes | `[dns]` | Order of bucket name resolvers to use. Available resolvers: `dns`, `nns`. | |
|
|
| `connect_timeout` | `duration` | | `10s` | Timeout to connect to a node. |
|
|
| `stream_timeout` | `duration` | | `10s` | Timeout for individual operations in streaming RPC. |
|
|
| `healthcheck_timeout` | `duration` | | `15s` | Timeout to check node health during rebalance. |
|
|
| `rebalance_interval` | `duration` | | `60s` | Interval to check node health. |
|
|
| `pool_error_threshold` | `uint32` | | `100` | The number of errors on connection after which node is considered as unhealthy. |
|
|
| `max_clients_count` | `int` | | `100` | Limits for processing of clients' requests. |
|
|
| `max_clients_deadline` | `duration` | | `30s` | Deadline after which the gate sends error `RequestTimeout` to a client. |
|
|
| `default_policy` | `string` | | `REP 3` | Default policy of placing containers in NeoFS. If a user sends a request `CreateBucket` and doesn't define policy for placing of a container in NeoFS, the S3 Gateway will put the container with default policy. |
|
|
| `allowed_access_key_id_prefixes` | `[]string` | | | List of allowed `AccessKeyID` prefixes which S3 GW serve. If the parameter is omitted, all `AccessKeyID` will be accepted. |
|
|
|
|
### `wallet` section
|
|
|
|
```yaml
|
|
wallet:
|
|
path: /path/to/wallet.json # Path to wallet
|
|
passphrase: "" # Passphrase to decrypt wallet.
|
|
address: NfgHwwTi3wHAS8aFAN243C5vGbkYDpqLHP
|
|
```
|
|
|
|
| Parameter | Type | Default value | Description |
|
|
|--------------|----------|---------------|---------------------------------------------------------------------------|
|
|
| `path` | `string` | | Path to wallet |
|
|
| `passphrase` | `string` | | Passphrase to decrypt wallet. |
|
|
| `address` | `string` | | Account address to get from wallet. If omitted default one will be used. |
|
|
|
|
### `peers` section
|
|
|
|
```yaml
|
|
# Nodes configuration
|
|
# This configuration makes the gateway use the first node (node1.neofs:8080)
|
|
# while it's healthy. Otherwise, gateway uses the second node (node2.neofs:8080)
|
|
# for 10% of requests and the third node (node3.neofs:8080) for 90% of requests.
|
|
# Until nodes with the same priority level are healthy
|
|
# nodes with other priority are not used.
|
|
# The lower the value, the higher the priority.
|
|
peers:
|
|
0:
|
|
address: node1.neofs:8080
|
|
priority: 1
|
|
weight: 1
|
|
1:
|
|
address: node2.neofs:8080
|
|
priority: 2
|
|
weight: 0.1
|
|
2:
|
|
address: node3.neofs:8080
|
|
priority: 2
|
|
weight: 0.9
|
|
```
|
|
|
|
| Parameter | Type | Default value | Description |
|
|
|------------|----------|---------------|---------------------------------------------------------------------------------------------------------------------------------------------------------|
|
|
| `address` | `string` | | Address of storage node. |
|
|
| `priority` | `int` | `1` | It allows to group nodes and don't switch group until all nodes with the same priority will be unhealthy. The lower the value, the higher the priority. |
|
|
| `weight` | `float` | `1` | Weight of node in the group with the same priority. Distribute requests to nodes proportionally to these values. |
|
|
|
|
### `tls` section
|
|
|
|
```yaml
|
|
tls:
|
|
cert_file: /path/to/cert
|
|
key_file: /path/to/key
|
|
```
|
|
|
|
| Parameter | Type | SIGHUP reload | Default value | Description |
|
|
|-------------|----------|---------------|---------------|------------------------------|
|
|
| `cert_file` | `string` | yes | | Path to the TLS certificate. |
|
|
| `key_file` | `string` | yes | | Path to the key. |
|
|
|
|
### `logger` section
|
|
|
|
```yaml
|
|
logger:
|
|
level: debug
|
|
```
|
|
|
|
| Parameter | Type | SIGHUP reload | Default value | Description |
|
|
|-----------|----------|---------------|---------------|----------------------------------------------------------------------------------------------------|
|
|
| `level` | `string` | yes | `debug` | Logging level.<br/>Possible values: `debug`, `info`, `warn`, `error`, `dpanic`, `panic`, `fatal`. |
|
|
|
|
### `tree` section
|
|
|
|
```yaml
|
|
tree:
|
|
service: s01.neofs.devenv:8080
|
|
```
|
|
|
|
| Parameter | Type | Default value | Description |
|
|
|-----------|----------|---------------|------------------------------------------------------------------------------------------------------------|
|
|
| `service` | `string` | | Endpoint of the tree service. Must be provided. Can be one of the node address (from the `peers` section). |
|
|
|
|
### `cache` section
|
|
|
|
```yaml
|
|
cache:
|
|
objects:
|
|
lifetime: 300s
|
|
size: 150
|
|
list:
|
|
lifetime: 1m
|
|
size: 100
|
|
names:
|
|
lifetime: 1m
|
|
size: 1000
|
|
buckets:
|
|
lifetime: 1m
|
|
size: 500
|
|
system:
|
|
lifetime: 2m
|
|
size: 1000
|
|
accessbox:
|
|
lifetime: 5m
|
|
size: 10
|
|
accesscontrol:
|
|
lifetime: 1m
|
|
size: 100000
|
|
```
|
|
|
|
| Parameter | Type | Default value | Description |
|
|
|-----------------|-----------------------------------|-----------------------------------|----------------------------------------------------------------------------------------|
|
|
| `objects` | [Cache config](#cache-subsection) | `lifetime: 5m`<br>`size: 1000000` | Cache for objects (NeoFS headers). |
|
|
| `list` | [Cache config](#cache-subsection) | `lifetime: 60s`<br>`size: 100000` | Cache which keeps lists of objects in buckets. |
|
|
| `names` | [Cache config](#cache-subsection) | `lifetime: 60s`<br>`size: 10000` | Cache which contains mapping of nice name to object addresses. |
|
|
| `buckets` | [Cache config](#cache-subsection) | `lifetime: 60s`<br>`size: 1000` | Cache which contains mapping of bucket name to bucket info. |
|
|
| `system` | [Cache config](#cache-subsection) | `lifetime: 5m`<br>`size: 10000` | Cache for system objects in a bucket: bucket settings, notification configuration etc. |
|
|
| `accessbox` | [Cache config](#cache-subsection) | `lifetime: 10m`<br>`size: 100` | Cache which stores access box with tokens by its address. |
|
|
| `accesscontrol` | [Cache config](#cache-subsection) | `lifetime: 1m`<br>`size: 100000` | Cache which stores owner to cache operation mapping. |
|
|
|
|
#### `cache` subsection
|
|
|
|
```yaml
|
|
lifetime: 2m
|
|
size: 1000
|
|
```
|
|
|
|
| Parameter | Type | Default value | Description |
|
|
|------------|------------|------------------|-------------------------------|
|
|
| `lifetime` | `duration` | depends on cache | Lifetime of entries in cache. |
|
|
| `size` | `int` | depends on cache | LRU cache size. |
|
|
|
|
### `nats` section
|
|
|
|
This is an advanced section, use with caution.
|
|
You can turn on notifications about successful completions of basic operations, and the gateway will send notifications
|
|
via NATS JetStream.
|
|
|
|
1. to configure the NATS server with JetStream
|
|
2. to specify NATS parameters for the S3 GW. It's ***necessary*** to define a values of `nats.enable` or
|
|
`S3_GW_NATS_ENABLED` as `True`
|
|
3. to configure notifications in a bucket
|
|
|
|
```yaml
|
|
nats:
|
|
enabled: true
|
|
endpoint: nats://localhost:4222
|
|
timeout: 30s
|
|
cert_file: /path/to/cert
|
|
key_file: /path/to/key
|
|
root_ca: /path/to/ca
|
|
```
|
|
|
|
| Parameter | Type | Default value | Description |
|
|
|---------------|------------|---------------|------------------------------------------------------|
|
|
| `enabled` | `bool` | `false` | Flag to enable the service. |
|
|
| `endpoint` | `string` | | NATS endpoint to connect to. |
|
|
| `timeout` | `duration` | `30s` | Timeout for the object notification operation. |
|
|
| `certificate` | `string` | | Path to the client certificate. |
|
|
| `key` | `string` | | Path to the client key. |
|
|
| `ca` | `string` | | Override root CA used to verify server certificates. |
|
|
|
|
### `cors` section
|
|
|
|
```yaml
|
|
cors:
|
|
default_max_age: 600
|
|
```
|
|
|
|
| Parameter | Type | Default value | Description |
|
|
|-------------------|-------|---------------|------------------------------------------------------|
|
|
| `default_max_age` | `int` | `600` | Value of `Access-Control-Max-Age` header in seconds. |
|
|
|
|
# `pprof` section
|
|
|
|
Contains configuration for the `pprof` profiler.
|
|
|
|
```yaml
|
|
pprof:
|
|
enabled: true
|
|
address: localhost:8085
|
|
```
|
|
|
|
| Parameter | Type | SIGHUP reload | Default value | Description |
|
|
|-----------|----------|---------------|------------------|-----------------------------------------|
|
|
| `enabled` | `bool` | yes | `false` | Flag to enable the service. |
|
|
| `address` | `string` | yes | `localhost:8085` | Address that service listener binds to. |
|
|
|
|
# `prometheus` section
|
|
|
|
Contains configuration for the `prometheus` metrics service.
|
|
|
|
```yaml
|
|
prometheus:
|
|
enabled: true
|
|
address: localhost:8086
|
|
```
|
|
|
|
| Parameter | Type | SIGHUP reload | Default value | Description |
|
|
|-----------|----------|---------------|------------------|-----------------------------------------|
|
|
| `enabled` | `bool` | yes | `false` | Flag to enable the service. |
|
|
| `address` | `string` | yes | `localhost:8086` | Address that service listener binds to. |
|
|
|
|
# `neofs` section
|
|
|
|
Contains parameters of requests to NeoFS.
|
|
This value can be overridden with `X-Amz-Meta-Neofs-Copies-Number` header for `PutObject`, `CopyObject`, `CreateMultipartUpload`.
|
|
|
|
```yaml
|
|
neofs:
|
|
set_copies_number: 0
|
|
```
|
|
|
|
| Parameter | Type | Default value | Description |
|
|
|---------------------|----------|---------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
|
|
| `set_copies_number` | `uint32` | `0` | Number of the object copies to consider PUT to NeoFS successful. <br/>Default value `0` means that object will be processed according to the container's placement policy |
|