neoneo-go/docs/node-configuration.md
2021-10-13 11:41:05 +03:00

12 KiB

NeoGo node configuration file

This section contains detailed NeoGo node configuration file description including default config values and tips to set up configurable values.

Each config file contains two sections. ApplicationConfiguration describes node-related settings and ProtocolConfiguration contains protocol-related settings. See the Application Configuration and Protocol Configuration sections for details on configurable values.

Application Configuration

ApplicationConfiguration section of yaml node configuration file contains node-related settings described in the table below.

Section Type Default value Description
Address string 127.0.0.1 Node address that P2P protocol handler binds to.
AnnouncedPort uint16 Same as the NodePort Node port which should be used to announce node's port on P2P layer, can differ from NodePort node is bound to (for example, if your node is behind NAT).
AttemptConnPeers int 20 Number of connection to try to establish when the connection count drops below the MinPeers value.
DBConfiguration DB Configuration Describes configuration for database. See the DB Configuration section for details.
DialTimeout int64 0 Maximum duration a single dial may take in seconds.
ExtensiblePoolSize int 20 Maximum amount of the extensible payloads from a single sender stored in a local pool.
LogPath string "", so only console logging File path where to store node logs.
MaxPeers int 100 Maximum numbers of peers that can be connected to the server.
MinPeers int 5 Minimum number of peers for normal operation, when the node has less than this number of peers it tries to connect with some new ones.
NodePort uint16 0, which is any free port The actual node port it is bound to.
Oracle Oracle Configuration Oracle module configuration. See the Oracle Configuration section for details.
P2PNotary P2P Notary Configuration P2P Notary module configuration. See the P2P Notary Configuration section for details.
PingInterval int64 30 Interval in seconds used in pinging mechanism for syncing blocks.
PingTimeout int64 90 Time to wait for pong (response for sent ping request).
Pprof Metrics Services Configuration Configuration for pprof service (profiling statistics gathering). See the Metrics Services Configuration section for details.
Prometheus Metrics Services Configuration Configuration for Prometheus (monitoring system). See the Metrics Services Configuration section for details
ProtoTickInterval int64 5 Duration in seconds between protocol ticks with each connected peer.
Relay bool true Determines whether the server is forwarding its inventory.
RPC RPC Configuration Describes RPC subsystem configuration. See the RPC Configuration for details.
StateRoot State Root Configuration State root module configuration. See the State Root Configuration section for details.
UnlockWallet Unlock Wallet Configuration Node wallet configuration used for consensus (dBFT) operation. See the Unlock Wallet Configuration section for details.

DB Configuration

DBConfiguration section describes configuration for node database and has the following format:

DBConfiguration:
  Type: leveldb
  LevelDBOptions:
    DataDirectoryPath: /chains/privnet
  RedisDBOptions:
    Addr: localhost:6379
    Password: ""
    DB: 0
  BoltDBOptions:
    FilePath: ./chains/privnet.bolt
  BadgerDBOptions:
    BadgerDir: ./chains/privnet.badger

where:

  • Type is the database type (string value). Supported types: levelDB, redisDB, boltDB, badgerDB.
  • LevelDBOptions are settings for LevelDB.
  • RedisDBOptions are options for RedisDB.
  • BoltDBOptions configures BoltDB.
  • BadgerDBOptions are options for BadgerDB.

Only options for the specified database type will be used.

Oracle Configuration

Oracle configuration section describes configuration for Oracle node module and has the following structure:

Oracle:
  Enabled: false
  AllowPrivateHost: false
  MaxTaskTimeout: 3600s
  MaxConcurrentRequests: 10
  Nodes: ["172.200.0.1:30333", "172.200.0.2:30334"]
  NeoFS:
    Nodes: ["172.200.0.1:30335", "172.200.0.2:30336"]
    Timeout: 2
  RefreshInterval: 180s
  RequestTimeout: 5s
  ResponseTimeout: 5s
  UnlockWallet:
    Path: "./oracle_wallet.json"
    Password: "pass"

Please, refer to the Oracle module documentation for details on configurable values.

P2P Notary Configuration

P2PNotary configuration section describes configuration for P2P Notary node module and has the following structure:

P2PNotary:
  Enabled: false
  UnlockWallet:
    Path: "/notary_wallet.json"
    Password: "pass"

where:

  • Enabled denotes whether P2P Notary module is active.
  • UnlockWallet is a Notary node wallet configuration, see the Unlock Wallet Configuration section for structure details.

Please, refer to the [Notary module documentation](./notary.md#Notary node module) for details on module features.

Metrics Services Configuration

Metrics services configuration describes options for metrics services (pprof, Prometheus) and has the following structure:

Pprof:
  Enabled: false
  Address: ""
  Port: "30001"
Prometheus:
  Enabled: false
  Address: ""
  Port: "40001"

where:

  • Enabled denotes whether the service is enabled.
  • Address is a service address to be running at.
  • Port is a service port to be bound to.

RPC Configuration

RPC configuration section describes settings for the RPC server and has the following structure:

RPC:
  Enabled: true
  Address: ""
  EnableCORSWorkaround: false
  MaxGasInvoke: 50
  MaxIteratorResultItems: 100
  MaxFindResultItems: 100
  Port: 10332
  TLSConfig:
    Address: ""
    CertFile: serv.crt
    Enabled: true
    Port: 10331
    KeyFile: serv.key

where:

  • Enabled denotes whether RPC server should be started.
  • Address is an RPC server address to be running at.
  • EnableCORSWorkaround enables Cross-Origin Resource Sharing and is useful if you're accessing RPC interface from the browser.
  • MaxGasInvoke is the maximum GAS allowed to spend during invokefunction and invokescript RPC-calls.
  • MaxIteratorResultItems - maximum number of elements extracted from iterator returned by invoke* call. When the MaxIteratorResultItems value is set to n, only n iterations are returned and truncated is true, indicating that there is still data to be returned.
  • MaxFindResultItems - the maximum number of elements for findstates response.
  • Port is an RPC server port it should be bound to.
  • TLS section configures TLS protocol.

State Root Configuration

StateRoot configuration section contains settings for state roots exchange and has the following structure:

StateRoot:
  Enabled: false
  UnlockWallet:
    Path: "./wallet.json"
    Password: "pass"

where:

  • Enabled enables state root module.
  • UnlockWallet contains wallet settings, see Unlock Wallet Configuration section for structure details.

Unlock Wallet Configuration

UnlockWallet configuration section contains wallet settings and has the following structure:

UnlockWallet:
  Path: "./wallet.json"
  Password: "pass"

where:

  • Path is a path to wallet.
  • Password is a wallet password.

Protocol Configuration

ProtocolConfiguration section of yaml node configuration file contains protocol-related settings described in the table below.

Section Type Default value Description Notes
KeepOnlyLatestState bool false Specifies if MPT should only store latest state. If true, DB size will be smaller, but older roots won't be accessible. This value should remain the same for the same database.
Magic uint32 0 Magic number which uniquely identifies NEO network.
MaxBlockSize uint32 262144 Maximum block size in bytes.
MaxBlockSystemFee int64 900000000000 Maximum overall transactions system fee per block.
MaxTraceableBlocks uint32 2102400 Length of the chain accessible to smart contracts. RemoveUntraceableBlocks should be enabled to use this setting.
MaxTransactionsPerBlock uint16 512 Maximum number of transactions per block.
MemPoolSize int 50000 Size of the node's memory pool where transactions are stored before they are added to block.
NativeActivations map[string][]uint32 ContractManagement: [0]
StdLib: [0]
CryptoLib: [0]
LedgerContract: [0]
NeoToken: [0]
GasToken: [0]
PolicyContract: [0]
RoleManagement: [0]
OracleContract: [0]
The list of histories of native contracts updates. Each list item shod be presented as a known native contract name with the corresponding list of chain's heights. The contract is not active until chain reaches the first height value specified in the list. Notary is supported.
P2PNotaryRequestPayloadPoolSize int 1000 Size of the node's P2P Notary request payloads memory pool where P2P Notary requests are stored before main or fallback transaction is completed and added to the chain.
This option is valid only if P2PSigExtensions are enabled.
Not supported by the C# node, thus may affect heterogeneous networks functionality.
P2PSigExtensions bool false Enables following additional Notary service related logic:
• Transaction attributes NotValidBefore, Conflicts and NotaryAssisted
• Network payload of the P2PNotaryRequest type
• Native Notary contract
• Notary node module
Not supported by the C# node, thus may affect heterogeneous networks functionality.
P2PStateExchangeExtensions bool false Enables following P2P MPT state data exchange logic:
StateSyncInterval protocol setting
• P2P commands GetMPTDataCMD and MPTDataCMD
Not supported by the C# node, thus may affect heterogeneous networks functionality.
RemoveUntraceableBlocks bool false Denotes whether old blocks should be removed from cache and database. If enabled, then only last MaxTraceableBlocks are stored and accessible to smart contracts.
ReservedAttributes bool false Allows to have reserved attributes range for experimental or private purposes.
SaveStorageBatch bool false Enables storage batch saving before every persist. It is similar to StorageDump plugin for C# node.
SecondsPerBlock int 15 Minimal time that should pass before next block is accepted.
SeedList []string [] List of initial nodes addresses used to establish connectivity.
StandbyCommittee []string [] List of public keys of standby committee validators are chosen from.
StateRootInHeader bool false Enables storing state root in block header. Experimental protocol extension!
StateSyncInterval int 40000 The number of blocks between state heights available for MPT state data synchronization. P2PStateExchangeExtensions should be enabled to use this setting.
ValidatorsCount int 0 Number of validators.
VerifyBlocks bool false Denotes whether to verify received blocks.
VerifyTransactions bool false Denotes whether to verify transactions in received blocks.