Some checks failed
/ Builds (1.19) (pull_request) Successful in 3m0s
/ Builds (1.20) (pull_request) Successful in 2m50s
/ DCO (pull_request) Failing after 1m9s
/ Vulncheck (pull_request) Successful in 1m20s
/ Lint (pull_request) Successful in 7m50s
/ Tests (1.19) (pull_request) Successful in 3m1s
/ Tests (1.20) (pull_request) Successful in 3m21s
Flag allows to skip checking `Content-Encoding` for `aws-chunked` value Signed-off-by: Denis Kirillov <d.kirillov@yadro.com>
546 lines
28 KiB
Markdown
546 lines
28 KiB
Markdown
# Configuration
|
|
|
|
There are three ways to configure the S3 GW:
|
|
|
|
1. CLI parameters
|
|
2. YAML file
|
|
3. Environment variables
|
|
|
|
Everything available as a CLI parameter can also be specified via environment variables and almost everything can be
|
|
specified via `.yaml` configuration file.
|
|
|
|
But **not vice versa**, some parameters can be configured only with environment variables/configuration file.
|
|
Most of these parameters have default values, therefore, these ways to configure the gateway are optional and
|
|
basic configuration can be completed with CLI parameters only.
|
|
|
|
1. [CLI parameters](#cli-parameters)
|
|
1. [Nodes and weights](#nodes-and-weights)
|
|
2. [Wallet](#wallet)
|
|
3. [Binding and TLS](#listening-on-address-and-TLS)
|
|
4. [RPC endpoint and resolving of bucket names](#rpc-endpoint-and-resolving-of-bucket-names)
|
|
5. [Processing of requests](#processing-of-requests)
|
|
6. [Connection to FrostFS](#connection-to-FrostFS)
|
|
7. [Monitoring and metrics](#monitoring-and-metrics)
|
|
2. [YAML file and environment variables](#yaml-file-and-environment-variables)
|
|
1. [Configuration file](#frostfs-s3-gateway-configuration-file)
|
|
|
|
## CLI parameters
|
|
|
|
### Nodes and weights
|
|
|
|
You can specify multiple `-p` options to add more FrostFS nodes; this will make
|
|
a gateway spread requests equally among them (using weight 1 for every node):
|
|
|
|
```shell
|
|
$ frostfs-s3-gw -p 192.168.130.72:8080 -p 192.168.130.71:8080
|
|
```
|
|
|
|
If you want some specific load distribution proportions, use weights and priorities, they
|
|
can only be specified via environment variables or a configuration file.
|
|
|
|
### Wallet
|
|
|
|
Wallet (`--wallet`) is a mandatory parameter. It is a path to a wallet file. You can provide a passphrase to decrypt
|
|
a wallet via env variable or conf file, or you will be asked to enter a password interactively.
|
|
You can also specify an account address to use from a wallet using the `--address` parameter.
|
|
|
|
### Listening on address and TLS
|
|
|
|
You can make the gateway listen on specific address using the `--listen_address` option.
|
|
|
|
It can also provide TLS interface for its users, just specify paths to the key and
|
|
certificate files via `--tls.key_file` and `--tls.cert_file` parameters. Note
|
|
that using these options makes gateway TLS-only. If you need to serve both TLS
|
|
and plain text, you either have to run two gateway instances or use some
|
|
external redirecting solution.
|
|
|
|
Example to bind to `192.168.130.130:443` and serve TLS there (keys and nodes are
|
|
omitted):
|
|
|
|
```shell
|
|
$ frostfs-s3-gw --listen_address 192.168.130.130:443 \
|
|
--tls.key_file=key.pem --tls.cert_file=cert.pem
|
|
```
|
|
|
|
Using these flag you can configure only one address. To set multiple addresses use yaml config.
|
|
|
|
### RPC endpoint and resolving of bucket names
|
|
|
|
To set RPC endpoint specify a value of parameter `-r` or `--rpc_endpoint`. The parameter is **required if** another
|
|
parameter's `--resolve_order` value contains `nns`.
|
|
|
|
```shell
|
|
$ frostfs-s3-gw --rpc_endpoint http://morph-chain.frostfs.devenv:30333/ --resolve_order nns,dns
|
|
```
|
|
|
|
### Processing of requests
|
|
|
|
Maximum number of clients whose requests can be handled by the gateway can be specified by the value of
|
|
`--max_clients_count` parameter.
|
|
`--max_clients_deadline` defines deadline after which the gate sends error `RequestTimeout` to a client.
|
|
|
|
```shell
|
|
$ frostfs-s3-gw --max_clients_count 150 --max_clients_deadline 1m
|
|
```
|
|
|
|
### Connection to FrostFS
|
|
|
|
Timeout to connect to FrostFS nodes can be set with `--connect_timeout`
|
|
and timeout to check node health during rebalance`--healthcheck_timeout`.
|
|
|
|
Also, interval to check node health can be specified by `--rebalance_interval` value.
|
|
|
|
```shell
|
|
$ frostfs-s3-gw --healthcheck_timeout 15s --connect_timeout 1m --rebalance_interval 1h
|
|
```
|
|
|
|
### Monitoring and metrics
|
|
|
|
Pprof and Prometheus are integrated into the gateway. To enable them, use `--pprof` and `--metrics` flags or
|
|
`S3_GW_PPROF_ENABLED`/`S3_GW_PROMETHEUS_ENABLED` environment variables.
|
|
|
|
## YAML file and environment variables
|
|
|
|
Example of a YAML configuration file: [yaml-example](/config/config.yaml)
|
|
Examples of environment variables: [env-example](/config/config.env).
|
|
|
|
A path to a configuration file can be specified with `--config` parameter:
|
|
|
|
```shell
|
|
$ frostfs-s3-gw --config your-config.yaml
|
|
```
|
|
|
|
### Multiple configs
|
|
|
|
You can use several config files when running application. It allows you to split configuration into parts.
|
|
For example, you can use separate yaml file for pprof and prometheus section in config (see [config examples](../config)).
|
|
You can either provide several files with repeating `--config` flag or provide path to the dir that contains all configs using `--config-dir` flag.
|
|
Also, you can combine these flags:
|
|
|
|
```shell
|
|
$ frostfs-s3-gw --config ./config/config.yaml --config /your/partial/config.yaml --config-dir ./config/dir
|
|
```
|
|
|
|
**Note:** next file in `--config` flag overwrites values from the previous one.
|
|
Files from `--config-dir` directory overwrite values from `--config` files.
|
|
So the command above run `frostfs-s3-gw` to listen on `0.0.0.0:8080` address (value from `./config/config.yaml`),
|
|
applies parameters from `/your/partial/config.yaml`,
|
|
enable pprof (value from `./config/dir/pprof.yaml`) and prometheus (value from `./config/dir/prometheus.yaml`).
|
|
|
|
### Reload on SIGHUP
|
|
|
|
Some config values can be reloaded on SIGHUP signal.
|
|
Such parameters have special mark in tables below.
|
|
|
|
You can send SIGHUP signal to app using the following command:
|
|
|
|
```shell
|
|
$ kill -s SIGHUP <app_pid>
|
|
```
|
|
|
|
Example:
|
|
|
|
```shell
|
|
$ ./bin/frostfs-s3-gw --config config.yaml &> s3.log &
|
|
[1] 998346
|
|
|
|
$ cat s3.log
|
|
# ...
|
|
2022-09-30T17:38:22.338+0300 info s3-gw/app.go:371 application started {"name": "frostfs-s3-gw", "version": "v0.24.0"}
|
|
# ...
|
|
|
|
$ kill -s SIGHUP 998346
|
|
|
|
$ cat s3.log
|
|
# ...
|
|
2022-09-30T17:38:40.909+0300 info s3-gw/app.go:491 SIGHUP config reload completed
|
|
```
|
|
|
|
### FrostFS S3 Gateway configuration file
|
|
|
|
This section contains detailed FrostFS S3 Gateway configuration file description
|
|
including default config values and some tips to set up configurable values.
|
|
|
|
There are some custom types used for brevity:
|
|
|
|
* `duration` -- string consisting of a number and a suffix. Suffix examples include `s` (seconds), `m` (minutes), `ms` (
|
|
milliseconds).
|
|
|
|
### Structure
|
|
|
|
| Section | Description |
|
|
|--------------------|----------------------------------------------------------------|
|
|
| no section | [General parameters](#general-section) |
|
|
| `wallet` | [Wallet configuration](#wallet-section) |
|
|
| `peers` | [Nodes configuration](#peers-section) |
|
|
| `placement_policy` | [Placement policy configuration](#placement_policy-section) |
|
|
| `server` | [Server configuration](#server-section) |
|
|
| `logger` | [Logger configuration](#logger-section) |
|
|
| `cache` | [Cache configuration](#cache-section) |
|
|
| `nats` | [NATS configuration](#nats-section) |
|
|
| `cors` | [CORS configuration](#cors-section) |
|
|
| `pprof` | [Pprof configuration](#pprof-section) |
|
|
| `prometheus` | [Prometheus configuration](#prometheus-section) |
|
|
| `tracing` | [Tracing configuration](#tracing-section) |
|
|
| `frostfs` | [Parameters of requests to FrostFS](#frostfs-section) |
|
|
| `resolve_bucket` | [Bucket name resolving configuration](#resolve_bucket-section) |
|
|
| `kludge` | [Different kludge configuration](#kludge-section) |
|
|
|
|
### General section
|
|
|
|
```yaml
|
|
listen_domains:
|
|
- s3dev.frostfs.devenv
|
|
- s3dev2.frostfs.devenv
|
|
|
|
rpc_endpoint: http://morph-chain.frostfs.devenv:30333
|
|
resolve_order:
|
|
- nns
|
|
- dns
|
|
|
|
connect_timeout: 10s
|
|
stream_timeout: 10s
|
|
healthcheck_timeout: 15s
|
|
rebalance_interval: 60s
|
|
pool_error_threshold: 100
|
|
|
|
max_clients_count: 100
|
|
max_clients_deadline: 30s
|
|
|
|
allowed_access_key_id_prefixes:
|
|
- Ck9BHsgKcnwfCTUSFm6pxhoNS4cBqgN2NQ8zVgPjqZDX
|
|
- 3stjWenX15YwYzczMr88gy3CQr4NYFBQ8P7keGzH5QFn
|
|
```
|
|
|
|
| Parameter | Type | SIGHUP reload | Default value | Description |
|
|
|----------------------------------|------------|---------------|----------------|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
|
|
| `listen_domains` | `[]string` | | | Domains to be able to use virtual-hosted-style access to bucket. |
|
|
| `rpc_endpoint` | `string` | yes | | The address of the RPC host to which the gateway connects to resolve bucket names (required to use the `nns` resolver). |
|
|
| `resolve_order` | `[]string` | yes | `[dns]` | Order of bucket name resolvers to use. Available resolvers: `dns`, `nns`. | |
|
|
| `connect_timeout` | `duration` | | `10s` | Timeout to connect to a node. |
|
|
| `stream_timeout` | `duration` | | `10s` | Timeout for individual operations in streaming RPC. |
|
|
| `healthcheck_timeout` | `duration` | | `15s` | Timeout to check node health during rebalance. |
|
|
| `rebalance_interval` | `duration` | | `60s` | Interval to check node health. |
|
|
| `pool_error_threshold` | `uint32` | | `100` | The number of errors on connection after which node is considered as unhealthy. |
|
|
| `max_clients_count` | `int` | | `100` | Limits for processing of clients' requests. |
|
|
| `max_clients_deadline` | `duration` | | `30s` | Deadline after which the gate sends error `RequestTimeout` to a client. |
|
|
| `allowed_access_key_id_prefixes` | `[]string` | | | List of allowed `AccessKeyID` prefixes which S3 GW serve. If the parameter is omitted, all `AccessKeyID` will be accepted. |
|
|
|
|
### `wallet` section
|
|
|
|
```yaml
|
|
wallet:
|
|
path: /path/to/wallet.json # Path to wallet
|
|
passphrase: "" # Passphrase to decrypt wallet.
|
|
address: NfgHwwTi3wHAS8aFAN243C5vGbkYDpqLHP
|
|
```
|
|
|
|
| Parameter | Type | Default value | Description |
|
|
|--------------|----------|---------------|---------------------------------------------------------------------------|
|
|
| `path` | `string` | | Path to wallet |
|
|
| `passphrase` | `string` | | Passphrase to decrypt wallet. |
|
|
| `address` | `string` | | Account address to get from wallet. If omitted default one will be used. |
|
|
|
|
### `peers` section
|
|
|
|
```yaml
|
|
# Nodes configuration
|
|
# This configuration makes the gateway use the first node (node1.frostfs:8080)
|
|
# while it's healthy. Otherwise, gateway uses the second node (node2.frostfs:8080)
|
|
# for 10% of requests and the third node (node3.frostfs:8080) for 90% of requests.
|
|
# Until nodes with the same priority level are healthy
|
|
# nodes with other priority are not used.
|
|
# The lower the value, the higher the priority.
|
|
peers:
|
|
0:
|
|
address: node1.frostfs:8080
|
|
priority: 1
|
|
weight: 1
|
|
1:
|
|
address: node2.frostfs:8080
|
|
priority: 2
|
|
weight: 0.1
|
|
2:
|
|
address: node3.frostfs:8080
|
|
priority: 2
|
|
weight: 0.9
|
|
```
|
|
|
|
| Parameter | Type | Default value | Description |
|
|
|------------|----------|---------------|---------------------------------------------------------------------------------------------------------------------------------------------------------|
|
|
| `address` | `string` | | Address of storage node. |
|
|
| `priority` | `int` | `1` | It allows to group nodes and don't switch group until all nodes with the same priority will be unhealthy. The lower the value, the higher the priority. |
|
|
| `weight` | `float` | `1` | Weight of node in the group with the same priority. Distribute requests to nodes proportionally to these values. |
|
|
|
|
|
|
### `placement_policy` section
|
|
|
|
```yaml
|
|
placement_policy:
|
|
default: REP 3
|
|
region_mapping: /path/to/mapping/rules.json
|
|
copies_numbers:
|
|
- location_constraint: one-dc
|
|
vector:
|
|
- 1
|
|
- 2
|
|
- 3
|
|
```
|
|
|
|
| Parameter | Type | SIGHUP reload | Default value | Description |
|
|
|------------------|------------------------------------------------|---------------|---------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
|
|
| `default` | `string` | yes | `REP 3` | Default policy of placing containers in FrostFS. If a user sends a request `CreateBucket` and doesn't define policy for placing of a container in FrostFS, the S3 Gateway will put the container with default policy. |
|
|
| `region_mapping` | `string` | yes | | Path to file that maps aws `LocationContraint` values to FrostFS placement policy. The similar to `--container-policy` flag in `frostfs-s3-authmate` util, see in [docs](./authmate.md#containers-policy) |
|
|
| `copies_numbers` | [[]Copies numbers](#copies_numbers-subsection) | no | | Array of configured location constraints and their copies numbers. |
|
|
|
|
File for `region_mapping` must contain something like this:
|
|
|
|
```json
|
|
{
|
|
"rep-3": "REP 3",
|
|
"complex": "REP 1 IN X CBF 1 SELECT 1 FROM * AS X",
|
|
"example-json-policy": "{\"replicas\":[{\"count\":3,\"selector\":\"SelASD0\"}],\"container_backup_factor\":3,\"selectors\":[{\"name\":\"SelASD0\",\"count\":3,\"filter\":\"*\"}],\"filters\":[]}"
|
|
}
|
|
```
|
|
|
|
**Note:** on SIGHUP reload policies will be updated only if both parameters are valid.
|
|
So if you change `default` to some valid value and set invalid path in `region_mapping` the `default` value won't be changed.
|
|
|
|
#### `copies_numbers` subsection
|
|
|
|
```yaml
|
|
- location_constraint: sample-01
|
|
vector:
|
|
- 1
|
|
- 2
|
|
- 3
|
|
```
|
|
|
|
| Parameter | Type | SIGHUP reload | Default value | Description |
|
|
|-----------------------|----------|---------------|---------------|----------------------------------------------------------|
|
|
| `location_constraint` | `string` | no | | Location constraint text label. |
|
|
| `vector` | `[]int` | no | | Array of copies numbers corresponding to the constraint. |
|
|
|
|
|
|
### `server` section
|
|
|
|
You can specify several listeners for server. For example, for `http` and `https`.
|
|
|
|
```yaml
|
|
server:
|
|
- address: 0.0.0.0:8080
|
|
tls:
|
|
enabled: false
|
|
cert_file: /path/to/cert
|
|
key_file: /path/to/key
|
|
- address: 0.0.0.0:8081
|
|
tls:
|
|
enabled: true
|
|
cert_file: /path/to/another/cert
|
|
key_file: /path/to/another/key
|
|
```
|
|
|
|
| Parameter | Type | SIGHUP reload | Default value | Description |
|
|
|-----------------|----------|---------------|----------------|-----------------------------------------------|
|
|
| `address` | `string` | | `0.0.0.0:8080` | The address that the gateway is listening on. |
|
|
| `tls.enabled` | `bool` | | false | Enable TLS or not. |
|
|
| `tls.cert_file` | `string` | yes | | Path to the TLS certificate. |
|
|
| `tls.key_file` | `string` | yes | | Path to the key. |
|
|
|
|
### `logger` section
|
|
|
|
```yaml
|
|
logger:
|
|
level: debug
|
|
```
|
|
|
|
| Parameter | Type | SIGHUP reload | Default value | Description |
|
|
|-----------|----------|---------------|---------------|----------------------------------------------------------------------------------------------------|
|
|
| `level` | `string` | yes | `debug` | Logging level.<br/>Possible values: `debug`, `info`, `warn`, `error`, `dpanic`, `panic`, `fatal`. |
|
|
|
|
### `cache` section
|
|
|
|
```yaml
|
|
cache:
|
|
objects:
|
|
lifetime: 300s
|
|
size: 150
|
|
list:
|
|
lifetime: 1m
|
|
size: 100
|
|
names:
|
|
lifetime: 1m
|
|
size: 1000
|
|
buckets:
|
|
lifetime: 1m
|
|
size: 500
|
|
system:
|
|
lifetime: 2m
|
|
size: 1000
|
|
accessbox:
|
|
lifetime: 5m
|
|
size: 10
|
|
accesscontrol:
|
|
lifetime: 1m
|
|
size: 100000
|
|
```
|
|
|
|
| Parameter | Type | Default value | Description |
|
|
|-----------------|-----------------------------------|-----------------------------------|----------------------------------------------------------------------------------------|
|
|
| `objects` | [Cache config](#cache-subsection) | `lifetime: 5m`<br>`size: 1000000` | Cache for objects (FrostFS headers). |
|
|
| `list` | [Cache config](#cache-subsection) | `lifetime: 60s`<br>`size: 100000` | Cache which keeps lists of objects in buckets. |
|
|
| `names` | [Cache config](#cache-subsection) | `lifetime: 60s`<br>`size: 10000` | Cache which contains mapping of nice name to object addresses. |
|
|
| `buckets` | [Cache config](#cache-subsection) | `lifetime: 60s`<br>`size: 1000` | Cache which contains mapping of bucket name to bucket info. |
|
|
| `system` | [Cache config](#cache-subsection) | `lifetime: 5m`<br>`size: 10000` | Cache for system objects in a bucket: bucket settings, notification configuration etc. |
|
|
| `accessbox` | [Cache config](#cache-subsection) | `lifetime: 10m`<br>`size: 100` | Cache which stores access box with tokens by its address. |
|
|
| `accesscontrol` | [Cache config](#cache-subsection) | `lifetime: 1m`<br>`size: 100000` | Cache which stores owner to cache operation mapping. |
|
|
|
|
#### `cache` subsection
|
|
|
|
```yaml
|
|
lifetime: 2m
|
|
size: 1000
|
|
```
|
|
|
|
| Parameter | Type | Default value | Description |
|
|
|------------|------------|------------------|-------------------------------|
|
|
| `lifetime` | `duration` | depends on cache | Lifetime of entries in cache. |
|
|
| `size` | `int` | depends on cache | LRU cache size. |
|
|
|
|
### `nats` section
|
|
|
|
This is an advanced section, use with caution.
|
|
You can turn on notifications about successful completions of basic operations, and the gateway will send notifications
|
|
via NATS JetStream.
|
|
|
|
1. to configure the NATS server with JetStream
|
|
2. to specify NATS parameters for the S3 GW. It's ***necessary*** to define a values of `nats.enable` or
|
|
`S3_GW_NATS_ENABLED` as `True`
|
|
3. to configure notifications in a bucket
|
|
|
|
```yaml
|
|
nats:
|
|
enabled: true
|
|
endpoint: nats://localhost:4222
|
|
timeout: 30s
|
|
cert_file: /path/to/cert
|
|
key_file: /path/to/key
|
|
root_ca: /path/to/ca
|
|
```
|
|
|
|
| Parameter | Type | Default value | Description |
|
|
|---------------|------------|---------------|------------------------------------------------------|
|
|
| `enabled` | `bool` | `false` | Flag to enable the service. |
|
|
| `endpoint` | `string` | | NATS endpoint to connect to. |
|
|
| `timeout` | `duration` | `30s` | Timeout for the object notification operation. |
|
|
| `certificate` | `string` | | Path to the client certificate. |
|
|
| `key` | `string` | | Path to the client key. |
|
|
| `ca` | `string` | | Override root CA used to verify server certificates. |
|
|
|
|
### `cors` section
|
|
|
|
```yaml
|
|
cors:
|
|
default_max_age: 600
|
|
```
|
|
|
|
| Parameter | Type | Default value | Description |
|
|
|-------------------|-------|---------------|------------------------------------------------------|
|
|
| `default_max_age` | `int` | `600` | Value of `Access-Control-Max-Age` header in seconds. |
|
|
|
|
# `pprof` section
|
|
|
|
Contains configuration for the `pprof` profiler.
|
|
|
|
```yaml
|
|
pprof:
|
|
enabled: true
|
|
address: localhost:8085
|
|
```
|
|
|
|
| Parameter | Type | SIGHUP reload | Default value | Description |
|
|
|-----------|----------|---------------|------------------|-----------------------------------------|
|
|
| `enabled` | `bool` | yes | `false` | Flag to enable the service. |
|
|
| `address` | `string` | yes | `localhost:8085` | Address that service listener binds to. |
|
|
|
|
# `prometheus` section
|
|
|
|
Contains configuration for the `prometheus` metrics service.
|
|
General metrics are available on `/metrics` url path, billing metrics on `/metrics/billing`.
|
|
|
|
```yaml
|
|
prometheus:
|
|
enabled: true
|
|
address: localhost:8086
|
|
```
|
|
|
|
| Parameter | Type | SIGHUP reload | Default value | Description |
|
|
|-----------|----------|---------------|------------------|-----------------------------------------|
|
|
| `enabled` | `bool` | yes | `false` | Flag to enable the service. |
|
|
| `address` | `string` | yes | `localhost:8086` | Address that service listener binds to. |
|
|
|
|
# `tracing` section
|
|
|
|
Contains configuration for the `tracing` service.
|
|
|
|
```yaml
|
|
tracing:
|
|
enabled: false
|
|
exporter: "otlp_grpc"
|
|
endpoint: "localhost:4318"
|
|
```
|
|
|
|
| Parameter | Type | SIGHUP reload | Default value | Description |
|
|
|-------------|----------|---------------|---------------|-----------------------------------------|
|
|
| `enabled` | `bool` | yes | `false` | Flag to enable the service. |
|
|
| `exporter` | `string` | yes | `` | Type of tracing exporter. |
|
|
| `endpoint` | `string` | yes | `` | Address that service listener binds to. |
|
|
|
|
|
|
# `frostfs` section
|
|
|
|
Contains parameters of requests to FrostFS.
|
|
This value can be overridden with `X-Amz-Meta-Frostfs-Copies-Number` (value is comma separated numbers: `1,2,3`)
|
|
header for `PutObject`, `CopyObject`, `CreateMultipartUpload`.
|
|
|
|
```yaml
|
|
frostfs:
|
|
set_copies_number: [0]
|
|
```
|
|
|
|
| Parameter | Type | Default value | Description |
|
|
|---------------------|------------|---------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
|
|
| `set_copies_number` | `[]uint32` | `[0]` | Numbers of the object copies (for each replica) to consider PUT to FrostFS successful. <br/>Default value `[0]` or empty list means that object will be processed according to the container's placement policy |
|
|
|
|
# `resolve_bucket` section
|
|
|
|
Bucket name resolving parameters from and to container ID with `HEAD` request.
|
|
|
|
```yaml
|
|
resolve_bucket:
|
|
allow:
|
|
- container
|
|
deny:
|
|
```
|
|
|
|
| Parameter | Type | Default value | Description |
|
|
|-----------|------------|---------------|--------------------------------------------------------------------------------------------------------------------------|
|
|
| `allow` | `[]string` | | List of container zones which are available to resolve. Mutual exclusive with `deny` list. Prioritized over `deny` list. |
|
|
| `deny` | `[]string` | | List of container zones which are restricted to resolve. Mutual exclusive with `allow` list. |
|
|
|
|
# `kludge` section
|
|
|
|
Workarounds for non-standard use cases.
|
|
|
|
```yaml
|
|
kludge:
|
|
use_default_xmlns_for_complete_multipart: false
|
|
complete_multipart_keepalive: 10s
|
|
bypass_content_encoding_check_in_chunks: false
|
|
```
|
|
|
|
| Parameter | Type | SIGHUP reload | Default value | Description |
|
|
|--------------------------------------------|------------|---------------|---------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
|
|
| `use_default_xmlns_for_complete_multipart` | `bool` | yes | false | Enable using default xml namespace `http://s3.amazonaws.com/doc/2006-03-01/` when parse `CompleteMultipartUpload` xml body. |
|
|
| `complete_multipart_keepalive` | `duration` | no | 10s | Set timeout between whitespace transmissions during CompleteMultipartUpload processing. |
|
|
| `bypass_content_encoding_check_in_chunks` | `bool` | yes | false | Use this flag to be able to use [chunked upload approach](https://docs.aws.amazon.com/AmazonS3/latest/API/sigv4-streaming.html) without having `aws-chunked` value in `Content-Encoding` header. |
|