In case of ellipsis usage compiler defines argument type as ArrayT
(which is correct, because it's a natural representation of the last
argument, it represents the array of interface{}).
Here goes the problem:
```
=== RUN TestEventWarnings/variadic_event_args_via_ellipsis
compiler_test.go:251:
Error Trace: compiler_test.go:251
Error: Received unexpected error:
event 'Event' should have 'Integer' as type of 1 parameter, got: Array
Test: TestEventWarnings/variadic_event_args_via_ellipsis
```
Parsing the last argument in this case is a separate complicated problem
due to the fact that we need to grab types of elements of []interface{} inside the
fully qualified ast node which may looks like:
```
runtime.Notify("Event", (append([]interface{}{1, 2}, (([]interface{}{someVar, 4}))...))...)
```
Temporary solution is to exclude such notifications from analysis until we're
able to properly resolve element types of []interface{}.
It's possible that declared manifest event has parameter of AnyT for
those cases when parameter type differs from method to method. If so,
then we don't need to enforce type check after compilation.
Which greatly simplifies reuse of these packages (and they're expected to be
reused since real tokens implement standards and also add something of their
own) and allows to avoid effects like
doc_test.go:68:28: ambiguous selector neoContract.BalanceOf
when neo.Contract is used. Avoids duplication in NEP-11 implementation as
well.
So that (*codegen).Visit is able to omit code generation for these
unused global vars. The most tricky part is to detect unused global
variables, it is done in several steps:
1. Collect the set of named used/unused global vars.
2. Collect the set of globally declared expressions that contain
function calls.
3. Pick up global vars from the set made at step 2.
4. Traverse used functions and puck up those global vars that are used
from these functions.
5. Rename all globals that are presented in the set made at step 1
but are not presented in the set made on step 3 or step 4.
Move all auxiliary function declaration after Main, so that INITSLOT
instructions counter works properly. `vmAndCompileInterop` loads program
and moves nextIP to the Main function offset if there's no _init
function. If _init is there, then nextIP will be moved to the start of
_init. In TestInline we don't handle instructions properly (CALL/JMP
don't change nextIP), we just perform instruction traversal from the
start point via Next(), thus INITSLOT counter value depends on the
starting instruction, which depends on _init presence.
If variable is unnamed and does not contain function call then it's
treated as unused and code generation may be omitted for it
initialization/declaration.
In case if global var is unnamed (and, as a consequence, unused) and
contains a function call inside its value specification, we need to emit
code for this var to be able to call the function as it can have
side-effects. See the example:
```
package foo
import "github.com/nspcc-dev/neo-go/pkg/interop/runtime"
var A = f()
func Main() int {
return 3
}
func f() int {
runtime.Notify("Valuable notification", 1)
return 2
}
```
NEP-6 has a notion of locked acccounts and SignTx must respect this user's
choice. For some reason this setting was inappropriately used by our RPC
client tests (probably a different kind of lock was meant).
* each account must have an appropriate signer, if there is no signer for
this account in the tx it's an error
* we can only safely append to Scripts when account belongs to the next
signer (we don't have appropriate verification scripts for other signers)
* when contract has one parameter, the signature shouldn't be appended to
other data
I think these rules allow to handle more cases and do that safer. We have more
complex scenarios though, like non-signature parameters or mixed-parameter
invocation scripts, but that's out of scope for now.
calculatenetworkfee MUST calculate complete proper network fee, if we have
some extensions enabled and some attributes should be paid for that they're a
part of the equation too.
Adding an array multiple times leads to the fast update via `IncRC`.
This hides the allocation that is there on the first addition. In this
commit add another benchmark which measures Add/Remove together, to
ensure that `switch` in `refCounter.Add` is entered. Benchmark results
are meaningful, because `Add`/`Remove` have almost identical implementation.
Signed-off-by: Evgeniy Stratonikov <evgeniy@nspcc.ru>
We're dealing with a transaction here and it can't be decoded successfully
unless it has an appropriate number of witness scripts (matching the number of
signers) with appropriate hashes (matching signers). So this iterations make
no sense at all, we know exactly where to look for the
verification/invocation scripts.
Blockchain's notificationDispatcher sends events to channels and these
channels must be read from. Unfortunately, regular service shutdown procedure
does unsubscription first (outside of the read loop) and only then drains the
channel. While it waits for unsubscription request to be accepted
notificationDispatcher can try pushing more data into the same channel which
will lead to a deadlock. Reading in the same method solves this, any number of
events can be pushed until unsub channel accepts the data.
Unsubscribe and drain first, then return from the Shutdown method. It's
important wrt to subsequent chain shutdown process (normally it's closed right
after the network server).
Unfortunately Go doesn't allow to easily reuse readers in full packages, still
we can have this wrapper with a little overhead (the alternative is to move
specific methods into types of their own, but I'm not sure how it's going to
be accepted user-side).
Notice that int64 types are used for gas per block or registration price
because the price has to fit into the system fee limitation and gas per block
value can't be more than 10 GAS. We use int64 for votes as well in other types
since NEO is limited to 100M.
An attempt to compile the following code leads to runtime panic:
```
package foo
type CustomInt int
func Main() int {
var i CustomInt
i = 5
return i.Do(2)
}
func (CustomInt) Do(arg int) int {
return arg
}
```
The panic:
```
panic: runtime error: index out of range [0] with length 0 [recovered]
panic: runtime error: index out of range [0] with length 0
goroutine 22 [running]:
testing.tRunner.func1.2({0xa341c0, 0xc0001606d8})
/usr/local/go/src/testing/testing.go:1209 +0x24e
testing.tRunner.func1()
/usr/local/go/src/testing/testing.go:1212 +0x218
panic({0xa341c0, 0xc0001606d8})
/usr/local/go/src/runtime/panic.go:1038 +0x215
github.com/nspcc-dev/neo-go/pkg/compiler.(*codegen).convertFuncDecl(0xc00015e3c0, {0xc753b8, 0xc000152c80}, 0xc000266300, 0x30)
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/pkg/compiler/codegen.go:497 +0x10b3
github.com/nspcc-dev/neo-go/pkg/compiler.(*codegen).compile.func2(0xc000152c80, 0xc00023c410)
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/pkg/compiler/codegen.go:2153 +0x3f8
github.com/nspcc-dev/neo-go/pkg/compiler.(*codegen).ForEachFile.func1(0xc000229b80)
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/pkg/compiler/compiler.go:102 +0x82
github.com/nspcc-dev/neo-go/pkg/compiler.(*codegen).ForEachPackage(0xc00015e3c0, 0xc000189bb0)
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/pkg/compiler/compiler.go:93 +0xc6
github.com/nspcc-dev/neo-go/pkg/compiler.(*codegen).ForEachFile(0x999a20, 0xc000130d80)
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/pkg/compiler/compiler.go:99 +0x45
github.com/nspcc-dev/neo-go/pkg/compiler.(*codegen).compile(0xc00015e3c0, 0xc0002669f0, 0x1)
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/pkg/compiler/codegen.go:2140 +0x445
github.com/nspcc-dev/neo-go/pkg/compiler.codeGen(0xc0002669f0)
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/pkg/compiler/codegen.go:2191 +0x353
github.com/nspcc-dev/neo-go/pkg/compiler.CompileWithOptions({0xa6f39a, 0x50b6b3}, {0xc6d1a0, 0xc0002421e0}, 0x0)
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/pkg/compiler/compiler.go:218 +0x65
github.com/nspcc-dev/neo-go/pkg/compiler_test.vmAndCompileInterop(0x5648df, {0xa9bf23, 0x94})
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/pkg/compiler/vm_test.go:75 +0x113
github.com/nspcc-dev/neo-go/pkg/compiler_test.eval(0xc0002421c0, {0xa9bf23, 0x61be8c7}, {0xa68880, 0xc0002421c0})
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/pkg/compiler/vm_test.go:36 +0x2d
github.com/nspcc-dev/neo-go/pkg/compiler_test.TestUnnamedMethodReceiver(0x4079f9)
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/pkg/compiler/function_call_test.go:400 +0x4f
testing.tRunner(0xc000204b60, 0xbcebb0)
/usr/local/go/src/testing/testing.go:1259 +0x102
created by testing.(*T).Run
/usr/local/go/src/testing/testing.go:1306 +0x35a
```
The solution is to use the same approach as for unnamed function
parameters handling introduced in #2204. (c *funcScope).newVariable is
able to properly handle "_" receiver.
C# servers with SessionEnabled=false will return iterator IDs and no session
IDs which can be reported as an error immediately because the iterator can't
be traversed.
And test it with the RPC server.
Notice that getters still return int64 instead of *big.Int, that's because
these values are very limited and technically could even fit into an int (but
that seems to be too dangerous to use for long-term compatibility).
See neo-project/neo#2390. Can't see it there? No wonder, that's why we have
this bug for a year and a half. Not critical, we don't care about versions,
but _very_ annoying.
Somewhat similar to invoker, but changing the state (or just creating a
transaction). Transaction creation could've been put into a structure of its
own, but it seems to be less convenient to use this way.
And determine the need for Null dynamically. For some reason the only dynamic
context is Contract.Call. CALLT is not dynamic and neither is a call from
native contract, go figure...
