Let upper-layer APIs like actor.Send() return it as well. Server can return
"already exists" which is an error and yet at the same time a very special
one, in many cases it means we can proceed with waiting for the TX to settle.
Sometimes it can be hard to persist all changes at ones, the process
can take almost all RAM and a lot of time. Here's the example of reset
for mainnet from 2.4M to 1:
```
anna@kiwi:~/Documents/GitProjects/nspcc-dev/neo-go$ ./bin/neo-go db reset -m --height 1
2022-11-20T17:16:48.236+0300 INFO MaxBlockSize is not set or wrong, setting default value {"MaxBlockSize": 262144}
2022-11-20T17:16:48.236+0300 INFO MaxBlockSystemFee is not set or wrong, setting default value {"MaxBlockSystemFee": 900000000000}
2022-11-20T17:16:48.237+0300 INFO MaxTransactionsPerBlock is not set or wrong, using default value {"MaxTransactionsPerBlock": 512}
2022-11-20T17:16:48.237+0300 INFO MaxValidUntilBlockIncrement is not set or wrong, using default value {"MaxValidUntilBlockIncrement": 5760}
2022-11-20T17:16:48.240+0300 INFO restoring blockchain {"version": "0.2.6"}
2022-11-20T17:16:48.297+0300 INFO initialize state reset {"target height": 1}
2022-11-20T17:16:48.300+0300 INFO trying to reset blocks, transactions and AERs
2022-11-20T17:19:29.313+0300 INFO blocks, transactions ans AERs are reset {"took": "2m41.015126493s", "keys": 3958420}
...
```
To avoid OOM killer, split blocks reset into multiple stages. It increases
operation time due to intermediate DB persists, but makes things cleaner, the
result for almost the same DB height with the new approach:
```
anna@kiwi:~/Documents/GitProjects/nspcc-dev/neo-go$ ./bin/neo-go db reset -m --height 1
2022-11-20T17:39:42.023+0300 INFO MaxBlockSize is not set or wrong, setting default value {"MaxBlockSize": 262144}
2022-11-20T17:39:42.023+0300 INFO MaxBlockSystemFee is not set or wrong, setting default value {"MaxBlockSystemFee": 900000000000}
2022-11-20T17:39:42.023+0300 INFO MaxTransactionsPerBlock is not set or wrong, using default value {"MaxTransactionsPerBlock": 512}
2022-11-20T17:39:42.023+0300 INFO MaxValidUntilBlockIncrement is not set or wrong, using default value {"MaxValidUntilBlockIncrement": 5760}
2022-11-20T17:39:42.026+0300 INFO restoring blockchain {"version": "0.2.6"}
2022-11-20T17:39:42.071+0300 INFO initialize state reset {"target height": 1}
2022-11-20T17:39:42.073+0300 INFO trying to reset blocks, transactions and AERs
2022-11-20T17:40:11.735+0300 INFO intermediate batch of removed blocks, transactions and AERs is persisted {"batches persisted": 1, "took": "29.66363737s", "keys": 210973}
2022-11-20T17:40:33.574+0300 INFO intermediate batch of removed blocks, transactions and AERs is persisted {"batches persisted": 2, "took": "21.839208683s", "keys": 241203}
2022-11-20T17:41:29.325+0300 INFO intermediate batch of removed blocks, transactions and AERs is persisted {"batches persisted": 3, "took": "55.750698386s", "keys": 250593}
2022-11-20T17:42:12.532+0300 INFO intermediate batch of removed blocks, transactions and AERs is persisted {"batches persisted": 4, "took": "43.205892757s", "keys": 321896}
2022-11-20T17:43:07.978+0300 INFO intermediate batch of removed blocks, transactions and AERs is persisted {"batches persisted": 5, "took": "55.445398156s", "keys": 334822}
2022-11-20T17:43:35.603+0300 INFO intermediate batch of removed blocks, transactions and AERs is persisted {"batches persisted": 6, "took": "27.625292032s", "keys": 317131}
2022-11-20T17:43:51.747+0300 INFO intermediate batch of removed blocks, transactions and AERs is persisted {"batches persisted": 7, "took": "16.144359017s", "keys": 355832}
2022-11-20T17:44:05.176+0300 INFO intermediate batch of removed blocks, transactions and AERs is persisted {"batches persisted": 8, "took": "13.428733899s", "keys": 357690}
2022-11-20T17:44:32.895+0300 INFO intermediate batch of removed blocks, transactions and AERs is persisted {"batches persisted": 9, "took": "27.718548783s", "keys": 393356}
2022-11-20T17:44:51.814+0300 INFO intermediate batch of removed blocks, transactions and AERs is persisted {"batches persisted": 10, "took": "18.917954658s", "keys": 366492}
2022-11-20T17:45:07.208+0300 INFO intermediate batch of removed blocks, transactions and AERs is persisted {"batches persisted": 11, "took": "15.392642196s", "keys": 326030}
2022-11-20T17:45:18.776+0300 INFO intermediate batch of removed blocks, transactions and AERs is persisted {"batches persisted": 12, "took": "11.568255716s", "keys": 299884}
2022-11-20T17:45:25.862+0300 INFO last batch of removed blocks, transactions and AERs is persisted {"batches persisted": 13, "took": "7.086079594s", "keys": 190399}
2022-11-20T17:45:25.862+0300 INFO blocks, transactions ans AERs are reset {"took": "5m43.791214084s", "overall persisted keys": 3966301}
...
```
We need to keep the headers information consistent with header batches
and headers. This comit fixes the bug with failing blockchain
initialization on recovering from state reset interrupted after the
second stage (blocks/txs/AERs removal):
```
anna@kiwi:~/Documents/GitProjects/nspcc-dev/neo-go$ ./bin/neo-go db reset -t --height 83000
2022-11-20T16:28:29.437+0300 INFO MaxValidUntilBlockIncrement is not set or wrong, using default value {"MaxValidUntilBlockIncrement": 5760}
2022-11-20T16:28:29.440+0300 INFO restoring blockchain {"version": "0.2.6"}
failed to create Blockchain instance: could not initialize blockchain: could not get header 1898cd356a4a2688ed1c6c7ba1fd6ba7d516959d8add3f8dd26232474d4539bd: key not found
```
Don't use cache because it's not yet initialized. Also, perform
safety checks only if state reset wasn't yet started. These fixes
alloww to solve the following problem while recovering from
interrupted state reset:
```
anna@kiwi:~/Documents/GitProjects/nspcc-dev/neo-go$ ./bin/neo-go db reset -t --height 83000
2022-11-20T15:51:31.431+0300 INFO MaxValidUntilBlockIncrement is not set or wrong, using default value {"MaxValidUntilBlockIncrement": 5760}
2022-11-20T15:51:31.434+0300 INFO restoring blockchain {"version": "0.2.6"}
failed to create Blockchain instance: could not initialize blockchain: current block height is 0, can't reset state to height 83000
```
We don't use all of the Stack functionality for it, so drop useless methods
and avoid some interface conversions. It increases single-node TPS by about
0.9%, so nothing really important there, but not a bad change either. Maybe it
can be reworked again with generics though.
Blockchain's subscriptions, unsubscriptions and notifications are
handled by a single notificationDispatcher routine. Thus, on attempt
to send the subsequent event to Blockchain's subscribers, dispatcher
can't handle subscriptions\unsubscriptions. Make subscription and
unsubscription to be a non-blocking operation for blockchain on the
server side, otherwise it may cause the dispatcher locks.
To achieve this, use a separate lock for those code that make calls
to blockchain's subscription API and for subscription counters on
the server side.
Small (especially dockerized/virtualized) networks often start all nodes at
ones and then we see a lot of connection flapping in the log. This happens
because nodes try to connect to each other simultaneously, establish two
connections, then each one finds a duplicate and drops it, but this can be
different duplicate connections on other sides, so they retry and it all
happens for some time. Eventually everything settles, but we have a lot of
garbage in the log and a lot of useless attempts.
This random waiting timeout doesn't change the logic much, adds a minimal
delay, but increases chances for both nodes to establish a proper single
connection on both sides to only then see another one and drop it on both
sides as well. It leads to almost no flapping in small networks, doesn't
affect much bigger ones. The delay is close to unnoticeable especially if
there is something in the DB for node to process during startup.
Consider mainnet, it has an AttemptConnPeers of 20, so may already have 3
peers and request 20 more, then have 4th connected and attemtp 20 more again,
this leads to a huge number of connections easily.
Consider initial connection phase for public networks:
* simultaneous connections to seeds
* very quick handshakes
* got five handshaked peers and some getaddr requests sent
* but addr replies won't trigger new connections
* so we can stay with just five connections until any of them breaks or a
(long) address checking timer fires
This new timers solves the problem, it's adaptive at the same time. If we have
enough peers we won't be waking up often.
* treat connected/handshaked peers separately in the discoverer, save
"original" address for connected ones, it can be a name instead of IP and
it's important to keep it to avoid reconnections
* store name->IP mapping for seeds if and when they're connected to avoid
reconnections
* block seed if it's detected to be our own node (which is often the case for
small private networks)
* add an event for handshaked peers in the server, connected but
non-handshaked ones are not really helpful for MinPeers or GetAddr logic
Fixes#2796.
If VUB-th block is received, we still can't guaranty that transaction
wasn't accepted to chain. Back this situation by rolling back to a
poll-based waiter.
Do not block subscribers until the unsubscription request to RPC server
is completed. Otherwise, another notification may be received from the
RPC server which will block the unsubscription process.
At the same time, fix event-based waiter. We must not block the receiver
channel during unsubscription because there's a chance that subsequent
event will be sent by the server. We need to read this event in order not
to block the WSClient's readloop.
Bad contract -> no contract. Unfortunately we've got a broken
6f1837723768f27a6f6a14452977e3e0e264f2cc contract on the mainnet which can't
be decoded (even though it had been saved successfully), so this is a
temporary fix for #2801 to be able to start mainnet node after shutdown.
v.estack is used throughout the code to work with estack, while ctx.sc.estack
is (theoretically) just a reference to it that is saved on script load and
restored to v.estack on context unload. The problem is that v.estack can grow
as we use it and can be reallocated away from its original slice (saved in the
ctx.sc.estack), so either ctx.sc.estack should be a pointer or we need to
ensure that it's correct when loading a new script. The second approach is a
bit safer for now and it fixes#2798.
client_test.go:1935:
Error Trace: /home/rik/dev/neo-go/pkg/services/rpcsrv/client_test.go:1935
Error: Should NOT be empty, but was 00000000-0000-0000-0000-000000000000
Test: TestClient_Iterator_SessionConfigVariations/sessions_disabled
It's obviously empty, since we have sessions disabled, but it was not
considered to be empty in testify 1.7.0, now it is, see 840cb80149
There is a security issue found in github.com/btcsuite/btcd that we don't care
about (we're only using 256k1 implementation), but GitHub complains about
it. We could update to github.com/btcsuite/btcd/btcec/v2, but it's now just a
thin wrapper over github.com/decred/dcrd/dcrec/secp256k1/v4, so we better use
it directly.
* strip NEP-XX methods before going into generator to avoid unused imports
* nepXX.Invoker types already include Call
* always import util, it's used for Hash
Execution events are followed by block events, not vise versa, thus,
we can wait until VUB block to be accepted to be sure that
transaction wasn't accepted to chain.
Every 1000 blocks seems to be OK for big networks (that only had done some
initial requests previously and then effectively never requested addresses
again because there was a sufficient number of addresses), won't hurt smaller
ones as well (that effectively keep doing this on every connect/disconnect,
peer changes are very rare there, but when they happen we want to have some
quick reaction to these changes).
32 is a very good number, but we all know 42 is a better one. And it can even
be proven by tests with higher peaking TPS values.
You may wonder why is it so good? Because we're using packet-switching
networks mostly and a packet is a packet almost irrespectively of how bit it
is. Yet a packet has some maximum possible size (hi, MTU) and this size most
of the time is 1500 (or a little less than that, hi VPN). Subtract IP header
(20 for IPv4 or 40 for IPv6 not counting options), TCP header (another 20) and
Neo message/payload headers (~8 for this case) and we have just a little more
than 1400 bytes for our dear hashes. Which means that in a single packet most
of the time we can have 42-44 of them, maybe 45. Choosing between these
numbers is not hard then.
We have AttemptConnPeers that is closely related, the more we have there the
bigger the network supposedly is, so it's much better than magic minPoolCount.
When block is being spread through the network we can get a lot of invs with
the same hash. Some more stale nodes may also announce previous or some
earlier block. We can avoid full DB lookup for them and minimize inv handling
time (timeouts in inv handler had happened in #2744).
It doesn't affect tests, just makes node a little less likely to spend some
considerable amount of time in the inv handler.
Sometimes we already have it, but it's not yet processed, so we can save on
getdata request. It only affects very high-speed networks like 4-1 scenario
and it doesn't affect it a lot, but still we can do it.
This is not exactly the protocol-level batching as was tried in #1770 and
proposed by neo-project/neo#2365, but it's a TCP-level change in that we now
Write() a set of messages and given that Go sets up TCP sockets with
TCP_NODELAY by default this is a substantial change, we have less packets
generated with the same amount of data. It doesn't change anything on properly
connected networks, but the ones with delays benefit from it a lot.
This also improves queueing because we no longer generate 32 messages to
deliver on transaction's GetData, it's just one stream of bytes with 32
messages inside.
Do the same with GetBlocksByIndex, we can have a lot of messages there too.
But don't forget about potential peer DoS attacks, if a peer is to request a
lot of big blocks we need to flush them before we process the whole set.
This allows to naturally scale transaction processing if we have some peer
that is sending a lot of them while others are mostly silent. It also can help
somewhat in the event we have 50 peers that all send transactions. 4+1
scenario benefits a lot from it, while 7+2 slows down a little. Delayed
scenarios don't care.
Surprisingly, this also makes disconnects (#2744) much more rare, 4-node
scenario almost never sees it now. Most probably this is the case where peers
affect each other a lot, single-threaded transaction receiver can be slow
enough to trigger some timeout in getdata handler of its peer (because it
tries to push a number of replies).
It makes sense in general (further narrowing down the time window when
transactions are processed by consensus thread) and it improves block times a
little too, especially in the 7+2 scenario.
Related to #2744.
Until the consensus process starts for a new block and until it really needs
some transactions we can spare some cycles by not delivering transactions to
it. In tests this doesn't affect TPS, but makes block delays a bit more
stable. Related to #2744, I think it also may cause timeouts during
transaction processing (waiting on the consensus process channel while it does
something dBFT-related).
When the network is big enough, MinPeers may be suboptimal for good network
connectivity, but if we know the network size we can do some estimation on the
number of sufficient peers.
Share parameters parsing code between 'contract invokefunction' and
'vm run' commands. It allows VM CLI to parse more complicated parameter
types including arrays and file-backed bytestrings.
They can fail right in the getPeers or they can fail later when packet send
is attempted. Of course they can complete handshake in-between these events,
but most likely they won't and we'll waste more resources on this attempt. So
rule out bad peers immediately.
Drop EnqueueP2PPacket, replace EnqueueHPPacket with EnqueueHPMessage. We use
Enqueue* when we have a specific per-peer message, it makes zero sense
duplicating serialization code for it (unlike Broadcast*).
Follow the general rules of broadcasts, even though it's somewhat different
from Inv, we just want to get some reply from our neighbors to see if we're
behind. We don't strictly need all neighbors for it.
We have a number of queues for different purposes:
* regular broadcast queue
* direct p2p queue
* high-priority queue
And two basic egress scenarios:
* direct p2p messages (replies to requests in Server's handle* methods)
* broadcasted messages
Low priority broadcasted messages:
* transaction inventories
* block inventories
* notary inventories
* non-consensus extensibles
High-priority broadcasted messages:
* consensus extensibles
* getdata transaction requests from consensus process
* getaddr requests
P2P messages are a bit more complicated, most of the time they use p2p queue,
but extensible message requests/replies use HP queue.
Server's handle* code is run from Peer's handleIncoming, every peer has this
thread that handles incoming messages. When working with the peer it's
important to reply to requests and blocking this thread until we send (queue)
a reply is fine, if the peer is slow we just won't get anything new from
it. The queue used is irrelevant wrt this issue.
Broadcasted messages are radically different, we want them to be delivered to
many peers, but we don't care about specific ones. If it's delivered to 2/3 of
the peers we're fine, if it's delivered to more of them --- it's not an
issue. But doing this fairly is not an easy thing, current code tries performing
unblocked sends and if this doesn't yield enough results it then blocks (but
has a timeout, we can't wait indefinitely). But it does so in sequential
manner, once the peer is chosen the code will wait for it (and only it) until
timeout happens.
What can be done instead is an attempt to push the message to all of the peers
simultaneously (or close to that). If they all deliver --- OK, if some block
and wait then we can wait until _any_ of them pushes the message through (or
global timeout happens, we still can't wait forever). If we have enough
deliveries then we can cancel pending ones and it's again not an error if
these canceled threads still do their job.
This makes the system more dynamic and adds some substantial processing
overhead, but it's a networking code, any of this overhead is much lower than
the actual packet delivery time. It also allows to spread the load more
fairly, if there is any spare queue it'll get the packet and release the
broadcaster. On the next broadcast iteration another peer is more likely to be
chosen just because it didn't get a message previously (and had some time to
deliver already queued messages).
It works perfectly in tests, with optimal networking conditions we have much
better block times and TPS increases by 5-25%% depending on the scenario.
I'd go as far as to say that it fixes the original problem of #2678, because
in this particular scenario we have empty queues in ~100% of the cases and
this new logic will likely lead to 100% fan out in this case (cancelation just
won't happen fast enough). But when the load grows and there is some waiting
in the queue it will optimize out the slowest links.
Value of PublicKey parameter always stores public key bytes, not the
deserialized representation. All other code (CLI parameters parsing with
its NewParameterFromString, Parameter unmarshaller, etc.) is based on
the idea that value of PublicKey is []byte.
Peers can be slow, very slow, slow enough to affect node's regular
operation. We can't wait for them indefinitely, there has to be a timeout for
send operations.
This patch uses TimePerBlock as a reference for its timeout. It's relatively
big and it doesn't affect tests much, 4+1 scenarios tend to perform a little
worse with while 7+2 scenarios work a little better. The difference is in some
percents, but all of these tests easily have 10-15% variations from run to
run.
It's an important step in making our gossip better because we can't have any
behavior where neighbors directly block the node forever, refs. #2678 and
Refs. #2379, but not completely solves it, one package seriously outweights
others:
? github.com/nspcc-dev/neo-go/cli [no test files]
ok github.com/nspcc-dev/neo-go/cli/app 0.036s coverage: 100.0% of statements
ok github.com/nspcc-dev/neo-go/cli/cmdargs 0.011s coverage: 60.8% of statements
ok github.com/nspcc-dev/neo-go/cli/flags 0.009s coverage: 97.7% of statements
? github.com/nspcc-dev/neo-go/cli/input [no test files]
ok github.com/nspcc-dev/neo-go/cli/options 0.033s coverage: 50.0% of statements
? github.com/nspcc-dev/neo-go/cli/paramcontext [no test files]
ok github.com/nspcc-dev/neo-go/cli/query 2.155s coverage: 45.3% of statements
ok github.com/nspcc-dev/neo-go/cli/server 1.373s coverage: 67.8% of statements
ok github.com/nspcc-dev/neo-go/cli/smartcontract 8.819s coverage: 94.3% of statements
ok github.com/nspcc-dev/neo-go/cli/util 0.006s coverage: 10.9% of statements
? github.com/nspcc-dev/neo-go/cli/vm [no test files]
ok github.com/nspcc-dev/neo-go/cli/wallet 72.103s coverage: 88.2% of statements
Still a nice thing to have.
In case of ellipsis usage compiler defines argument type as ArrayT
(which is correct, because it's a natural representation of the last
argument, it represents the array of interface{}).
Here goes the problem:
```
=== RUN TestEventWarnings/variadic_event_args_via_ellipsis
compiler_test.go:251:
Error Trace: compiler_test.go:251
Error: Received unexpected error:
event 'Event' should have 'Integer' as type of 1 parameter, got: Array
Test: TestEventWarnings/variadic_event_args_via_ellipsis
```
Parsing the last argument in this case is a separate complicated problem
due to the fact that we need to grab types of elements of []interface{} inside the
fully qualified ast node which may looks like:
```
runtime.Notify("Event", (append([]interface{}{1, 2}, (([]interface{}{someVar, 4}))...))...)
```
Temporary solution is to exclude such notifications from analysis until we're
able to properly resolve element types of []interface{}.
It's possible that declared manifest event has parameter of AnyT for
those cases when parameter type differs from method to method. If so,
then we don't need to enforce type check after compilation.
Which greatly simplifies reuse of these packages (and they're expected to be
reused since real tokens implement standards and also add something of their
own) and allows to avoid effects like
doc_test.go:68:28: ambiguous selector neoContract.BalanceOf
when neo.Contract is used. Avoids duplication in NEP-11 implementation as
well.
So that (*codegen).Visit is able to omit code generation for these
unused global vars. The most tricky part is to detect unused global
variables, it is done in several steps:
1. Collect the set of named used/unused global vars.
2. Collect the set of globally declared expressions that contain
function calls.
3. Pick up global vars from the set made at step 2.
4. Traverse used functions and puck up those global vars that are used
from these functions.
5. Rename all globals that are presented in the set made at step 1
but are not presented in the set made on step 3 or step 4.
Move all auxiliary function declaration after Main, so that INITSLOT
instructions counter works properly. `vmAndCompileInterop` loads program
and moves nextIP to the Main function offset if there's no _init
function. If _init is there, then nextIP will be moved to the start of
_init. In TestInline we don't handle instructions properly (CALL/JMP
don't change nextIP), we just perform instruction traversal from the
start point via Next(), thus INITSLOT counter value depends on the
starting instruction, which depends on _init presence.
If variable is unnamed and does not contain function call then it's
treated as unused and code generation may be omitted for it
initialization/declaration.
In case if global var is unnamed (and, as a consequence, unused) and
contains a function call inside its value specification, we need to emit
code for this var to be able to call the function as it can have
side-effects. See the example:
```
package foo
import "github.com/nspcc-dev/neo-go/pkg/interop/runtime"
var A = f()
func Main() int {
return 3
}
func f() int {
runtime.Notify("Valuable notification", 1)
return 2
}
```
NEP-6 has a notion of locked acccounts and SignTx must respect this user's
choice. For some reason this setting was inappropriately used by our RPC
client tests (probably a different kind of lock was meant).
* each account must have an appropriate signer, if there is no signer for
this account in the tx it's an error
* we can only safely append to Scripts when account belongs to the next
signer (we don't have appropriate verification scripts for other signers)
* when contract has one parameter, the signature shouldn't be appended to
other data
I think these rules allow to handle more cases and do that safer. We have more
complex scenarios though, like non-signature parameters or mixed-parameter
invocation scripts, but that's out of scope for now.
calculatenetworkfee MUST calculate complete proper network fee, if we have
some extensions enabled and some attributes should be paid for that they're a
part of the equation too.
Adding an array multiple times leads to the fast update via `IncRC`.
This hides the allocation that is there on the first addition. In this
commit add another benchmark which measures Add/Remove together, to
ensure that `switch` in `refCounter.Add` is entered. Benchmark results
are meaningful, because `Add`/`Remove` have almost identical implementation.
Signed-off-by: Evgeniy Stratonikov <evgeniy@nspcc.ru>
We're dealing with a transaction here and it can't be decoded successfully
unless it has an appropriate number of witness scripts (matching the number of
signers) with appropriate hashes (matching signers). So this iterations make
no sense at all, we know exactly where to look for the
verification/invocation scripts.
Blockchain's notificationDispatcher sends events to channels and these
channels must be read from. Unfortunately, regular service shutdown procedure
does unsubscription first (outside of the read loop) and only then drains the
channel. While it waits for unsubscription request to be accepted
notificationDispatcher can try pushing more data into the same channel which
will lead to a deadlock. Reading in the same method solves this, any number of
events can be pushed until unsub channel accepts the data.
Unsubscribe and drain first, then return from the Shutdown method. It's
important wrt to subsequent chain shutdown process (normally it's closed right
after the network server).
Unfortunately Go doesn't allow to easily reuse readers in full packages, still
we can have this wrapper with a little overhead (the alternative is to move
specific methods into types of their own, but I'm not sure how it's going to
be accepted user-side).
Notice that int64 types are used for gas per block or registration price
because the price has to fit into the system fee limitation and gas per block
value can't be more than 10 GAS. We use int64 for votes as well in other types
since NEO is limited to 100M.
An attempt to compile the following code leads to runtime panic:
```
package foo
type CustomInt int
func Main() int {
var i CustomInt
i = 5
return i.Do(2)
}
func (CustomInt) Do(arg int) int {
return arg
}
```
The panic:
```
panic: runtime error: index out of range [0] with length 0 [recovered]
panic: runtime error: index out of range [0] with length 0
goroutine 22 [running]:
testing.tRunner.func1.2({0xa341c0, 0xc0001606d8})
/usr/local/go/src/testing/testing.go:1209 +0x24e
testing.tRunner.func1()
/usr/local/go/src/testing/testing.go:1212 +0x218
panic({0xa341c0, 0xc0001606d8})
/usr/local/go/src/runtime/panic.go:1038 +0x215
github.com/nspcc-dev/neo-go/pkg/compiler.(*codegen).convertFuncDecl(0xc00015e3c0, {0xc753b8, 0xc000152c80}, 0xc000266300, 0x30)
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/pkg/compiler/codegen.go:497 +0x10b3
github.com/nspcc-dev/neo-go/pkg/compiler.(*codegen).compile.func2(0xc000152c80, 0xc00023c410)
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/pkg/compiler/codegen.go:2153 +0x3f8
github.com/nspcc-dev/neo-go/pkg/compiler.(*codegen).ForEachFile.func1(0xc000229b80)
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/pkg/compiler/compiler.go:102 +0x82
github.com/nspcc-dev/neo-go/pkg/compiler.(*codegen).ForEachPackage(0xc00015e3c0, 0xc000189bb0)
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/pkg/compiler/compiler.go:93 +0xc6
github.com/nspcc-dev/neo-go/pkg/compiler.(*codegen).ForEachFile(0x999a20, 0xc000130d80)
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/pkg/compiler/compiler.go:99 +0x45
github.com/nspcc-dev/neo-go/pkg/compiler.(*codegen).compile(0xc00015e3c0, 0xc0002669f0, 0x1)
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/pkg/compiler/codegen.go:2140 +0x445
github.com/nspcc-dev/neo-go/pkg/compiler.codeGen(0xc0002669f0)
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/pkg/compiler/codegen.go:2191 +0x353
github.com/nspcc-dev/neo-go/pkg/compiler.CompileWithOptions({0xa6f39a, 0x50b6b3}, {0xc6d1a0, 0xc0002421e0}, 0x0)
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/pkg/compiler/compiler.go:218 +0x65
github.com/nspcc-dev/neo-go/pkg/compiler_test.vmAndCompileInterop(0x5648df, {0xa9bf23, 0x94})
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/pkg/compiler/vm_test.go:75 +0x113
github.com/nspcc-dev/neo-go/pkg/compiler_test.eval(0xc0002421c0, {0xa9bf23, 0x61be8c7}, {0xa68880, 0xc0002421c0})
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/pkg/compiler/vm_test.go:36 +0x2d
github.com/nspcc-dev/neo-go/pkg/compiler_test.TestUnnamedMethodReceiver(0x4079f9)
/home/anna/Documents/GitProjects/nspcc-dev/neo-go/pkg/compiler/function_call_test.go:400 +0x4f
testing.tRunner(0xc000204b60, 0xbcebb0)
/usr/local/go/src/testing/testing.go:1259 +0x102
created by testing.(*T).Run
/usr/local/go/src/testing/testing.go:1306 +0x35a
```
The solution is to use the same approach as for unnamed function
parameters handling introduced in #2204. (c *funcScope).newVariable is
able to properly handle "_" receiver.
C# servers with SessionEnabled=false will return iterator IDs and no session
IDs which can be reported as an error immediately because the iterator can't
be traversed.
And test it with the RPC server.
Notice that getters still return int64 instead of *big.Int, that's because
these values are very limited and technically could even fit into an int (but
that seems to be too dangerous to use for long-term compatibility).
