6a5769d1da
[ #948 ] Fix gofumpt issue
...
Signed-off-by: Anton Nikiforov <an.nikiforov@yadro.com>
2024-02-13 09:40:46 +03:00
b36a453238
[ #970 ] fstree: Add build tag to enable generic version on linux
...
Unless tested, generic version can start gaining bugs. With a separate
build tag we can have the best of both worlds:
1. Use optimized implementation for linux by default.
2. Run tests or benchmarks for both. Note that they are not actually
run automatically now, but this is at leas possible.
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
2024-02-09 16:12:11 +00:00
abd502215f
[ #970 ] fstree: Move file locking to the generic writer
...
It is not a part of FSTree itself, but rather a way to solve concurrent
counter update on non-linux implementations. New linux implementations
is pretty simple: link fails when the file exists, unlink fails when the
file doesn't exist.
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
2024-02-09 16:12:11 +00:00
fb74524ac7
[ #970 ] fstree: Move delete implementation to a separate file
...
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
2024-02-09 16:12:11 +00:00
7f692409cf
[ #970 ] fstree: Handle unsupported O_TMPFILE
...
Metabase test relied on this behaviour, so fix the test too.
Cherry-picking was hard and did too many conflicts,
here is an original PR:
https://github.com/nspcc-dev/neofs-node/pull/2624
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
2024-02-09 16:12:11 +00:00
Roman Khimov
fc31b9c947
[ #970 ] fstree: Add linux-specific file writer using O_TMPFILE
...
O_TMPFILE is implemented for all modern FSes and it's much easier and safer to
use. If application crashes in the middle of writing this file would be gone
and won't leave any garbage.
Notice that this implementation makes a different choice wrt EEXIST handling,
generic one always overwrites, while this one keeps the old data.
There is no real performance difference.
SSD (slow&old), XFS, Core i7-8565U:
Sync
```
name old time/op new time/op delta
Put/size=1024,thread=1/fstree-8 1.74ms ± 3% 0.06ms ± 7% -96.31% (p=0.000 n=10+10)
Put/size=1024,thread=20/fstree-8 10.0ms ±41% 1.1ms ±18% -88.95% (p=0.000 n=9+10)
Put/size=1024,thread=100/fstree-8 32.3ms ±60% 6.5ms ±14% -79.97% (p=0.000 n=10+10)
Put/size=1048576,thread=1/fstree-8 17.8ms ±90% 3.4ms ±70% -81.08% (p=0.000 n=10+10)
Put/size=1048576,thread=20/fstree-8 103ms ±174% 112ms ±158% ~ (p=0.971 n=10+10)
Put/size=1048576,thread=100/fstree-8 949ms ±78% 583ms ±132% ~ (p=0.089 n=10+10)
name old alloc/op new alloc/op delta
Put/size=1024,thread=1/fstree-8 3.17kB ± 1% 1.96kB ± 0% -38.09% (p=0.000 n=10+10)
Put/size=1024,thread=20/fstree-8 59.6kB ± 1% 39.2kB ± 1% -34.30% (p=0.000 n=8+10)
Put/size=1024,thread=100/fstree-8 299kB ± 0% 198kB ± 0% -33.90% (p=0.000 n=7+9)
Put/size=1048576,thread=1/fstree-8 3.38kB ± 1% 2.36kB ± 1% -30.22% (p=0.000 n=10+10)
Put/size=1048576,thread=20/fstree-8 65.7kB ± 4% 47.7kB ± 6% -27.27% (p=0.000 n=10+10)
Put/size=1048576,thread=100/fstree-8 351kB ± 8% 245kB ± 8% -30.22% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
Put/size=1024,thread=1/fstree-8 30.3 ± 2% 21.0 ± 0% -30.69% (p=0.000 n=10+10)
Put/size=1024,thread=20/fstree-8 554 ± 1% 413 ± 0% -25.35% (p=0.000 n=8+10)
Put/size=1024,thread=100/fstree-8 2.77k ± 0% 2.07k ± 0% -25.27% (p=0.000 n=7+10)
Put/size=1048576,thread=1/fstree-8 32.0 ± 0% 25.0 ± 0% -21.88% (p=0.000 n=9+8)
Put/size=1048576,thread=20/fstree-8 609 ± 5% 494 ± 6% -18.93% (p=0.000 n=10+10)
Put/size=1048576,thread=100/fstree-8 3.25k ± 9% 2.50k ± 8% -23.21% (p=0.000 n=10+10)
```
No sync
```
name old time/op new time/op delta
Put/size=1024,thread=1/fstree-8 71.3µs ±10% 59.8µs ±10% -16.21% (p=0.000 n=10+10)
Put/size=1024,thread=20/fstree-8 1.43ms ± 6% 1.22ms ±13% -14.53% (p=0.000 n=10+10)
Put/size=1024,thread=100/fstree-8 8.12ms ± 3% 6.36ms ± 2% -21.67% (p=0.000 n=8+9)
Put/size=1048576,thread=1/fstree-8 1.88ms ±70% 1.61ms ±78% ~ (p=0.393 n=10+10)
Put/size=1048576,thread=20/fstree-8 32.7ms ±28% 34.2ms ±112% ~ (p=0.968 n=9+10)
Put/size=1048576,thread=100/fstree-8 262ms ±56% 226ms ±34% ~ (p=0.447 n=10+9)
name old alloc/op new alloc/op delta
Put/size=1024,thread=1/fstree-8 2.89kB ± 0% 1.96kB ± 0% -32.28% (p=0.000 n=10+10)
Put/size=1024,thread=20/fstree-8 58.2kB ± 0% 39.5kB ± 0% -32.09% (p=0.000 n=8+8)
Put/size=1024,thread=100/fstree-8 291kB ± 0% 198kB ± 0% -32.19% (p=0.000 n=9+9)
Put/size=1048576,thread=1/fstree-8 3.05kB ± 1% 2.13kB ± 1% -30.16% (p=0.000 n=10+9)
Put/size=1048576,thread=20/fstree-8 62.6kB ± 0% 44.3kB ± 0% -29.23% (p=0.000 n=9+9)
Put/size=1048576,thread=100/fstree-8 302kB ± 0% 210kB ± 1% -30.39% (p=0.000 n=9+9)
name old allocs/op new allocs/op delta
Put/size=1024,thread=1/fstree-8 27.0 ± 0% 21.0 ± 0% -22.22% (p=0.000 n=10+10)
Put/size=1024,thread=20/fstree-8 539 ± 0% 415 ± 0% -22.98% (p=0.000 n=10+10)
Put/size=1024,thread=100/fstree-8 2.69k ± 0% 2.07k ± 0% -23.09% (p=0.000 n=9+9)
Put/size=1048576,thread=1/fstree-8 28.0 ± 0% 22.3 ± 3% -20.36% (p=0.000 n=8+10)
Put/size=1048576,thread=20/fstree-8 577 ± 0% 458 ± 0% -20.72% (p=0.000 n=9+9)
Put/size=1048576,thread=100/fstree-8 2.76k ± 0% 2.15k ± 0% -22.05% (p=0.000 n=9+8)
```
HDD (LVM), ext4, Ryzen 5 1600:
Sync
```
│ fs.sync-generic │ fs.sync-linux │
│ sec/op │ sec/op vs base │
Put/size=1024,thread=1/fstree-12 34.70m ± 19% 33.59m ± 16% ~ (p=0.529 n=10)
Put/size=1024,thread=20/fstree-12 188.8m ± 8% 189.2m ± 16% ~ (p=0.739 n=10)
Put/size=1024,thread=100/fstree-12 264.8m ± 22% 273.6m ± 28% ~ (p=0.353 n=10)
Put/size=1048576,thread=1/fstree-12 54.90m ± 14% 47.08m ± 18% ~ (p=0.063 n=10)
Put/size=1048576,thread=20/fstree-12 244.1m ± 14% 220.4m ± 22% ~ (p=0.579 n=10)
Put/size=1048576,thread=100/fstree-12 847.2m ± 5% 893.6m ± 3% +5.48% (p=0.000 n=10)
geomean 164.3m 158.9m -3.29%
│ fs.sync-generic │ fs.sync-linux │
│ B/op │ B/op vs base │
Put/size=1024,thread=1/fstree-12 3.375Ki ± 1% 2.471Ki ± 1% -26.80% (p=0.000 n=10)
Put/size=1024,thread=20/fstree-12 66.62Ki ± 6% 49.21Ki ± 6% -26.15% (p=0.000 n=10)
Put/size=1024,thread=100/fstree-12 319.2Ki ± 1% 230.9Ki ± 2% -27.64% (p=0.000 n=10)
Put/size=1048576,thread=1/fstree-12 3.457Ki ± 1% 2.559Ki ± 1% -25.97% (p=0.000 n=10)
Put/size=1048576,thread=20/fstree-12 66.91Ki ± 1% 49.16Ki ± 1% -26.52% (p=0.000 n=10)
Put/size=1048576,thread=100/fstree-12 338.8Ki ± 2% 252.3Ki ± 3% -25.54% (p=0.000 n=10)
geomean 42.17Ki 31.02Ki -26.44%
│ fs.sync-generic │ fs.sync-linux │
│ allocs/op │ allocs/op vs base │
Put/size=1024,thread=1/fstree-12 33.00 ± 0% 27.00 ± 0% -18.18% (p=0.000 n=10)
Put/size=1024,thread=20/fstree-12 639.5 ± 1% 519.0 ± 2% -18.84% (p=0.000 n=10)
Put/size=1024,thread=100/fstree-12 3.059k ± 1% 2.478k ± 2% -18.99% (p=0.000 n=10)
Put/size=1048576,thread=1/fstree-12 33.50 ± 1% 28.00 ± 4% -16.42% (p=0.000 n=10)
Put/size=1048576,thread=20/fstree-12 638.5 ± 1% 520.0 ± 1% -18.56% (p=0.000 n=10)
Put/size=1048576,thread=100/fstree-12 3.209k ± 2% 2.655k ± 2% -17.28% (p=0.000 n=10)
geomean 405.3 332.1 -18.05%
```
No sync
```
│ fs.nosync-generic │ fs.nosync-linux │
│ sec/op │ sec/op vs base │
Put/size=1024,thread=1/fstree-12 148.2µ ± 20% 136.6µ ± 19% -7.89% (p=0.029 n=10)
Put/size=1024,thread=20/fstree-12 1.140m ± 26% 1.364m ± 16% ~ (p=0.143 n=10)
Put/size=1024,thread=100/fstree-12 11.93m ± 68% 26.89m ± 62% ~ (p=0.123 n=10)
Put/size=1048576,thread=1/fstree-12 1.302m ± 3% 1.287m ± 5% ~ (p=0.481 n=10)
Put/size=1048576,thread=20/fstree-12 77.52m ± 8% 74.07m ± 7% ~ (p=0.278 n=10+9)
Put/size=1048576,thread=100/fstree-12 226.1m ± ∞ ¹
geomean 5.986m 3.434m +18.60% ²
¹ need >= 6 samples for confidence interval at level 0.95
² benchmark set differs from baseline; geomeans may not be comparable
│ fs.nosync-generic │ fs.nosync-linux │
│ B/op │ B/op vs base │
Put/size=1024,thread=1/fstree-12 2.879Ki ± 0% 1.972Ki ± 0% -31.51% (p=0.000 n=10)
Put/size=1024,thread=20/fstree-12 55.94Ki ± 1% 37.90Ki ± 1% -32.25% (p=0.000 n=10)
Put/size=1024,thread=100/fstree-12 272.6Ki ± 0% 182.1Ki ± 9% -33.21% (p=0.000 n=10)
Put/size=1048576,thread=1/fstree-12 3.158Ki ± 0% 2.259Ki ± 0% -28.46% (p=0.000 n=10)
Put/size=1048576,thread=20/fstree-12 58.87Ki ± 0% 41.03Ki ± 0% -30.30% (p=0.000 n=10+9)
Put/size=1048576,thread=100/fstree-12 299.8Ki ± ∞ ¹
geomean 36.71Ki 16.60Ki -31.17% ²
¹ need >= 6 samples for confidence interval at level 0.95
² benchmark set differs from baseline; geomeans may not be comparable
│ fs.nosync-generic │ fs.nosync-linux │
│ allocs/op │ allocs/op vs base │
Put/size=1024,thread=1/fstree-12 28.00 ± 0% 22.00 ± 0% -21.43% (p=0.000 n=10)
Put/size=1024,thread=20/fstree-12 530.0 ± 0% 407.5 ± 1% -23.11% (p=0.000 n=10)
Put/size=1024,thread=100/fstree-12 2.567k ± 0% 1.956k ± 9% -23.77% (p=0.000 n=10)
Put/size=1048576,thread=1/fstree-12 30.00 ± 0% 24.00 ± 0% -20.00% (p=0.000 n=10)
Put/size=1048576,thread=20/fstree-12 553.5 ± 0% 434.0 ± 0% -21.59% (n=10+9)
Put/size=1048576,thread=100/fstree-12 2.803k ± ∞ ¹
geomean 347.9 178.8 -21.99% ²
¹ need >= 6 samples for confidence interval at level 0.95
² benchmark set differs from baseline; geomeans may not be comparable
```
Signed-off-by: Roman Khimov <roman@nspcc.ru>
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
2024-02-09 16:12:11 +00:00
ff488b53a1
[ #970 ] fstree: Move write functions to a separate file
...
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
2024-02-09 16:12:11 +00:00
9a622a750d
[ #970 ] fstree: Move temporary path handling in a separate function
...
Allow to easier test different implementations.
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
2024-02-09 16:12:11 +00:00
d19ade23c8
[ #959 ] node: Set mode to shard's components when open it
...
Avoid opening database for `metabase` and `cache` in `Degraded` mode.
Signed-off-by: Anton Nikiforov <an.nikiforov@yadro.com>
2024-02-09 14:04:01 +00:00
db67c21d55
[ #947 ] engine: Evacuate trees to remote nodes
...
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2024-02-09 11:33:15 +03:00
728150d1d2
[ #947 ] engine: Evacuate trees to local shards
...
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2024-02-09 11:33:15 +03:00
15d853ea22
[ #947 ] controlSvc: Return tree evacuation stat
...
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2024-02-09 11:20:39 +03:00
b3f3505ada
[ #947 ] cli: Allow to specify evacuation scope
...
It may be required to evacuate only objects or only tree or all, so
now it spossible to specify.
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2024-02-09 11:20:38 +03:00
a6eb66bf9c
[ #947 ] evacuate: Refactor evacuate parameters
...
Drop methods to make it easier to extend.
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2024-02-09 11:20:38 +03:00
8e2a0611f4
[ #947 ] tree: Add method to list all trees
...
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2024-02-09 11:20:38 +03:00
cfc5ce7853
[ #964 ] metabase: Drop GC marks if object not found
...
GC inhumes expired locks and tombstones on all the shards.
So it could be GC mark without object.
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2024-02-08 07:54:39 +00:00
9ba48c582d
[ #917 ] engine: Allow to detach shards
...
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2024-02-06 14:49:47 +03:00
d0eadf7ea2
[ #799 ] engine: Skip put when object removed from shard
...
Signed-off-by: Anton Nikiforov <an.nikiforov@yadro.com>
2024-02-01 17:49:22 +00:00
e3573de6db
[ #930 ] gc: Stop internal activity by context
...
Signed-off-by: Anton Nikiforov <an.nikiforov@yadro.com>
2024-01-31 08:30:34 +00:00
675eec91f3
[ #938 ] shard: Update only changed counters
...
DCO action / DCO (pull_request) Successful in 5m40s
Vulncheck / Vulncheck (pull_request) Successful in 5m33s
Tests and linters / Staticcheck (pull_request) Successful in 7m12s
Build / Build Components (1.21) (pull_request) Successful in 7m25s
Build / Build Components (1.20) (pull_request) Successful in 7m29s
Tests and linters / Lint (pull_request) Successful in 8m26s
Tests and linters / Tests (1.20) (pull_request) Successful in 9m48s
Tests and linters / Tests with -race (pull_request) Successful in 9m56s
Tests and linters / Tests (1.21) (pull_request) Successful in 10m10s
If metric value hasn't changed, but we update metric, then
non existed metric will apear with zero value.
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2024-01-30 12:37:48 +03:00
c681354afd
[ #938 ] engine: Fix container count removal
...
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2024-01-30 12:37:48 +03:00
5ed330e436
[ #927 ] metabase: Delete GC marks
...
DCO action / DCO (pull_request) Successful in 6m34s
Vulncheck / Vulncheck (pull_request) Successful in 7m19s
Build / Build Components (1.20) (pull_request) Successful in 7m48s
Build / Build Components (1.21) (pull_request) Successful in 9m39s
Tests and linters / Staticcheck (pull_request) Successful in 10m36s
Tests and linters / Lint (pull_request) Successful in 11m26s
Tests and linters / Tests (1.20) (pull_request) Successful in 12m57s
Tests and linters / Tests (1.21) (pull_request) Successful in 13m8s
Tests and linters / Tests with -race (pull_request) Successful in 13m7s
`key` is changed inside `db.get`, so encode address again after get.
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2024-01-24 18:51:16 +03:00
931a5e9aaf
[ #918 ] engine: Move shard to degraded mode if metabase open failed
...
DCO action / DCO (pull_request) Successful in 1m55s
Build / Build Components (1.20) (pull_request) Successful in 2m14s
Vulncheck / Vulncheck (pull_request) Successful in 2m15s
Build / Build Components (1.21) (pull_request) Successful in 4m6s
Tests and linters / Tests (1.21) (pull_request) Successful in 5m58s
Tests and linters / Tests (1.20) (pull_request) Successful in 6m24s
Tests and linters / Staticcheck (pull_request) Successful in 6m11s
Tests and linters / Lint (pull_request) Successful in 6m37s
Tests and linters / Tests with -race (pull_request) Successful in 6m35s
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2024-01-23 11:16:40 +03:00
f526f49995
[ #874 ] engine: Check object existance concurrently
...
DCO action / DCO (pull_request) Successful in 1m36s
Vulncheck / Vulncheck (pull_request) Successful in 2m33s
Build / Build Components (1.21) (pull_request) Successful in 3m9s
Build / Build Components (1.20) (pull_request) Successful in 4m49s
Tests and linters / Tests (1.21) (pull_request) Successful in 6m5s
Tests and linters / Staticcheck (pull_request) Successful in 6m6s
Tests and linters / Tests (1.20) (pull_request) Successful in 6m39s
Tests and linters / Lint (pull_request) Successful in 7m0s
Tests and linters / Tests with -race (pull_request) Successful in 6m46s
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2024-01-23 09:28:29 +03:00
f5160b27fc
[ #920 ] tests: Fix data races
...
DCO action / DCO (pull_request) Successful in 2m2s
Build / Build Components (1.21) (pull_request) Successful in 3m35s
Vulncheck / Vulncheck (pull_request) Successful in 3m3s
Tests and linters / Staticcheck (pull_request) Successful in 5m23s
Tests and linters / Tests (1.20) (pull_request) Successful in 7m33s
Tests and linters / Tests (1.21) (pull_request) Successful in 7m41s
Tests and linters / Tests with -race (pull_request) Successful in 7m47s
Tests and linters / Lint (pull_request) Successful in 8m12s
Build / Build Components (1.20) (pull_request) Successful in 1m32s
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2024-01-19 14:06:05 +03:00
63d3ed1ad8
[ #904 ] tests: Close test engine after test
...
DCO action / DCO (pull_request) Successful in 2m7s
Vulncheck / Vulncheck (pull_request) Successful in 2m37s
Build / Build Components (1.20) (pull_request) Successful in 4m0s
Build / Build Components (1.21) (pull_request) Successful in 3m56s
Tests and linters / Tests (1.21) (pull_request) Successful in 6m25s
Tests and linters / Staticcheck (pull_request) Successful in 6m22s
Tests and linters / Tests (1.20) (pull_request) Successful in 6m43s
Tests and linters / Tests with -race (pull_request) Successful in 6m47s
Tests and linters / Lint (pull_request) Successful in 7m5s
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2024-01-17 19:04:39 +03:00
57171907e3
[ #904 ] metabase: Return if object was actuall inserted
...
This requires to count metrics properly.
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2024-01-17 19:04:39 +03:00
c1a80235db
[ #904 ] metabase: Log Inhume operation
...
It will be very useful for troubleshooting.
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2024-01-17 18:42:52 +03:00
a2ab373a0a
[ #895 ] metabase: Do not delete GC mark for virtual objects
...
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2024-01-11 12:32:09 +00:00
7166e77c2b
[ #895 ] test: Add logger to test shard
...
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2024-01-11 12:32:09 +00:00
47dcfa20f3
[ #895 ] test: Use t.Cleanup only for external resources
...
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2024-01-11 12:32:09 +00:00
f1b2b8bffa
[ #895 ] test: Fix NewLogger arguments list
...
`debug` is always true.
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2024-01-11 12:32:09 +00:00
4b8b4da681
[ #864 ] engine: Drop container count metric if container removed
...
DCO action / DCO (pull_request) Successful in 1m30s
Build / Build Components (1.21) (pull_request) Successful in 3m29s
Build / Build Components (1.20) (pull_request) Successful in 3m53s
Tests and linters / Lint (pull_request) Successful in 4m31s
Tests and linters / Tests (1.20) (pull_request) Successful in 5m1s
Tests and linters / Staticcheck (pull_request) Successful in 4m51s
Tests and linters / Tests (1.21) (pull_request) Successful in 5m13s
Tests and linters / Tests with -race (pull_request) Successful in 8m34s
Vulncheck / Vulncheck (pull_request) Successful in 58s
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2024-01-10 10:45:32 +03:00
d75e7e9a21
[ #864 ] engine: Drop container size metric if container deleted
...
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2024-01-10 10:44:54 +03:00
dfd62ca6b1
[ #864 ] metabase: Refactor delete/inhume
...
Available -> Logic, Raw -> Phy for delete/inhume results.
Use single counter instead of vectors.
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2024-01-09 09:59:42 +03:00
225fe2d4d5
[ #894 ] blobovniczatree: Speedup rebuild test
...
Down from 3s to 300ms.
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
2023-12-29 16:28:54 +00:00
581887148a
[ #569 ] cli: Add control shards writecache seal command
...
DCO action / DCO (pull_request) Successful in 2m46s
Vulncheck / Vulncheck (pull_request) Successful in 3m3s
Build / Build Components (1.21) (pull_request) Successful in 3m53s
Build / Build Components (1.20) (pull_request) Successful in 4m0s
Tests and linters / Staticcheck (pull_request) Successful in 5m31s
Tests and linters / Lint (pull_request) Successful in 6m17s
Tests and linters / Tests (1.20) (pull_request) Successful in 12m47s
Tests and linters / Tests (1.21) (pull_request) Successful in 13m14s
Tests and linters / Tests with -race (pull_request) Successful in 13m12s
It does the same as `control shards flush-writecache --seal`, but
has better name.
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2023-12-29 16:05:37 +03:00
7a9db5bcdd
[ #569 ] writecache: Do not wait modeMtx if mode changes
...
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2023-12-29 16:05:37 +03:00
32c282ca10
[ #569 ] writecache: Refactor flush
...
Make single RUnlock call instead of two.
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2023-12-29 16:05:37 +03:00
0cb0fc1735
[ #569 ] writecache: Allow to seal writecache after flush
...
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2023-12-29 16:05:37 +03:00
8180a0664f
[ #887 ] node: Drop badger writecache implementation
...
Vulncheck / Vulncheck (pull_request) Successful in 6m1s
Build / Build Components (1.21) (pull_request) Successful in 7m37s
Build / Build Components (1.20) (pull_request) Successful in 7m52s
Tests and linters / Staticcheck (pull_request) Successful in 8m56s
Tests and linters / Lint (pull_request) Successful in 9m26s
Tests and linters / Tests (1.21) (pull_request) Successful in 15m5s
Tests and linters / Tests with -race (pull_request) Successful in 15m7s
DCO action / DCO (pull_request) Successful in 1m1s
Tests and linters / Tests (1.20) (pull_request) Successful in 4m1s
Badger implementation isn't tested and works not well,
but requires human resources to maintain.
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2023-12-22 13:00:54 +03:00
d9cbb16bd3
[ #866 ] Use TTL for blobovnicza tree cache
...
Signed-off-by: Anton Nikiforov <an.nikiforov@yadro.com>
2023-12-19 16:36:28 +00:00
7eb46404a1
[ #863 ] blobovnicza: Fix counters
...
Vulncheck / Vulncheck (pull_request) Successful in 2m27s
DCO action / DCO (pull_request) Successful in 2m39s
Build / Build Components (1.21) (pull_request) Successful in 3m38s
Build / Build Components (1.20) (pull_request) Successful in 3m45s
Tests and linters / Staticcheck (pull_request) Successful in 4m15s
Tests and linters / Lint (pull_request) Successful in 5m47s
Tests and linters / Tests (1.20) (pull_request) Successful in 11m49s
Tests and linters / Tests (1.21) (pull_request) Successful in 12m16s
Tests and linters / Tests with -race (pull_request) Successful in 12m31s
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2023-12-13 13:34:29 +03:00
94ffe8bb45
[ #857 ] golangci: Add testifylint linter
...
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2023-12-12 16:27:02 +03:00
3b7c0362a8
[ #861 ] shard: Fix Delete object
...
DCO action / DCO (pull_request) Successful in 12m22s
Build / Build Components (1.20) (pull_request) Successful in 12m44s
Build / Build Components (1.21) (pull_request) Successful in 13m2s
Vulncheck / Vulncheck (pull_request) Successful in 13m3s
Tests and linters / Staticcheck (pull_request) Successful in 15m32s
Tests and linters / Lint (pull_request) Successful in 16m26s
Tests and linters / Tests (1.21) (pull_request) Successful in 26m11s
Tests and linters / Tests with -race (pull_request) Successful in 28m29s
Tests and linters / Tests (1.20) (pull_request) Successful in 3m28s
It is possible that object doesn't exist in metabase.
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2023-12-12 14:25:40 +03:00
681b2c5fd4
[ #825 ] policer: Do not drop required linking objects
...
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2023-12-12 11:04:03 +00:00
db49ad16cc
[ #826 ] blobovniczatree: Do not create DB's on init
...
DCO action / DCO (pull_request) Successful in 4m10s
Build / Build Components (1.21) (pull_request) Successful in 7m30s
Vulncheck / Vulncheck (pull_request) Successful in 7m5s
Tests and linters / Staticcheck (pull_request) Successful in 10m6s
Tests and linters / Lint (pull_request) Successful in 10m26s
Build / Build Components (1.20) (pull_request) Successful in 12m39s
Tests and linters / Tests (1.20) (pull_request) Successful in 16m55s
Tests and linters / Tests (1.21) (pull_request) Successful in 17m13s
Tests and linters / Tests with -race (pull_request) Successful in 17m14s
Blobovniczas will be created on write requests.
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2023-12-07 15:37:33 +03:00
ad0697adc4
[ #661 ] blobovnicza: Compute size with record size
...
To get more accurate size of blobovnicza use record
size (lenght of key + lenght of data).
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2023-12-07 15:37:33 +03:00
e54dc3dc7c
[ #698 ] blobovnicza: Store counter values
...
Blobovnicza initialization take a long time because of bucket
Stat() call. So now blobovnicza stores counters in META bucket.
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2023-12-07 15:37:33 +03:00
5e8c08da3e
[ #661 ] blobstore: Add address to error logs
...
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2023-12-07 15:37:33 +03:00
