b027a7f91e
[ #1234 ] pilorama: Fix GetByPath() on duplicate directories
...
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
2024-07-10 06:11:38 +00:00
6ace2f597e
[ #1234 ] pilorama: Add test for duplicate directory behaviour
...
When AddByPath() is called concurrently on 2 different nodes,
internal path components may be created twice. This violates some
of our assumptions in GetByPath() and, indirectly, in S3 handling of
GetSubTree() results.
Add a test for the correct behaviour, fixes will follow.
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
2024-07-10 06:11:38 +00:00
7085723c6b
[ #1074 ] pilorama: Allow empty filenames in SortedByFilename()
...
DCO action / DCO (pull_request) Successful in 5m38s
Vulncheck / Vulncheck (pull_request) Successful in 5m57s
Tests and linters / gopls check (pull_request) Successful in 6m57s
Build / Build Components (1.22) (pull_request) Successful in 6m48s
Build / Build Components (1.21) (pull_request) Successful in 6m52s
Tests and linters / Lint (pull_request) Successful in 8m26s
Tests and linters / Staticcheck (pull_request) Successful in 8m48s
Tests and linters / Tests (1.22) (pull_request) Successful in 11m39s
Tests and linters / Tests (1.21) (pull_request) Successful in 11m47s
Tests and linters / Tests with -race (pull_request) Successful in 13m49s
Pre-commit hooks / Pre-commit (pull_request) Successful in 17m24s
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
2024-06-28 17:46:24 +03:00
75eedf71f3
[ #1187 ] pilorama/test: Remove debug print
...
DCO action / DCO (pull_request) Successful in 19m36s
Vulncheck / Vulncheck (pull_request) Successful in 30m13s
Tests and linters / gopls check (pull_request) Successful in 33m40s
Build / Build Components (1.22) (pull_request) Successful in 34m44s
Tests and linters / Lint (pull_request) Successful in 37m6s
Tests and linters / Tests (1.22) (pull_request) Failing after 40m59s
Tests and linters / Tests (1.21) (pull_request) Failing after 41m56s
Tests and linters / Tests with -race (pull_request) Failing after 45m4s
Build / Build Components (1.21) (pull_request) Successful in 44m45s
Tests and linters / Staticcheck (pull_request) Successful in 15m42s
Pre-commit hooks / Pre-commit (pull_request) Successful in 1h0m46s
Introduced in e12fcc041d
2024-06-18 15:09:44 +03:00
b9fcaad21f
[ #1168 ] shard: Set Disabled as default mode for components
...
Signed-off-by: Anton Nikiforov <an.nikiforov@yadro.com>
2024-06-11 15:13:38 +00:00
806236da78
[ #1121 ] node: Change mode of shard components
...
Signed-off-by: Alexander Chuprov <a.chuprov@yadro.com>
2024-06-05 05:55:24 +00:00
e07869a8cf
[ #1100 ] Remove unused fields
...
DCO action / DCO (pull_request) Successful in 2m47s
Build / Build Components (1.21) (pull_request) Successful in 3m21s
Vulncheck / Vulncheck (pull_request) Successful in 3m33s
Build / Build Components (1.22) (pull_request) Successful in 5m25s
Tests and linters / gopls check (pull_request) Successful in 5m13s
Tests and linters / Staticcheck (pull_request) Successful in 6m13s
Tests and linters / Lint (pull_request) Successful in 7m2s
Tests and linters / Tests (1.21) (pull_request) Successful in 10m2s
Tests and linters / Tests with -race (pull_request) Successful in 9m55s
Tests and linters / Tests (1.22) (pull_request) Successful in 10m11s
Signed-off-by: Ekaterina Lebedeva <ekaterina.lebedeva@yadro.com>
2024-05-06 10:14:36 +03:00
d864945961
Reapply "[ #972 ] pilorama: Remove removeDuplicatesInPlace()"
...
This reverts commit 9f68305c2e
2024-04-10 12:09:34 +00:00
d614f04a0a
[ #1072 ] Fix gofumpt issues
...
Signed-off-by: Anton Nikiforov <an.nikiforov@yadro.com>
2024-04-03 22:21:14 +03:00
17af91619a
[ #1070 ] pilorama: Fix cycling behaviour for sorted listing
...
In case there are no items left, return empty slice.
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
2024-04-02 14:41:31 +00:00
e12fcc041d
[ #1059 ] services/tree: Fast sorted listing
...
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
2024-04-01 12:37:34 +00:00
d433b49265
[ #973 ] node: Resolve perfsprint linter
...
DCO action / DCO (pull_request) Successful in 2m40s
Vulncheck / Vulncheck (pull_request) Successful in 3m41s
Build / Build Components (1.20) (pull_request) Successful in 4m27s
Build / Build Components (1.21) (pull_request) Successful in 5m6s
Tests and linters / Staticcheck (pull_request) Successful in 6m16s
Tests and linters / gopls check (pull_request) Successful in 6m23s
Tests and linters / Lint (pull_request) Successful in 6m48s
Tests and linters / Tests (1.20) (pull_request) Successful in 9m4s
Tests and linters / Tests with -race (pull_request) Successful in 9m9s
Tests and linters / Tests (1.21) (pull_request) Successful in 9m23s
`fmt.Errorf can be replaced with errors.New` and `fmt.Sprintf can be replaced with string addition`
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2024-03-11 17:55:50 +03:00
9f68305c2e
Revert "[ #972 ] pilorama: Remove removeDuplicatesInPlace()"
...
This reverts commit 45fd4e4ff1
2024-02-19 15:36:01 +00:00
45fd4e4ff1
[ #972 ] pilorama: Remove removeDuplicatesInPlace()
...
Also, check that slices.CompareFunc() indeed passes all the tests before
removal.
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
2024-02-19 13:13:09 +00:00
d19ade23c8
[ #959 ] node: Set mode to shard's components when open it
...
Avoid opening database for `metabase` and `cache` in `Degraded` mode.
Signed-off-by: Anton Nikiforov <an.nikiforov@yadro.com>
2024-02-09 14:04:01 +00:00
728150d1d2
[ #947 ] engine: Evacuate trees to local shards
...
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2024-02-09 11:33:15 +03:00
8e2a0611f4
[ #947 ] tree: Add method to list all trees
...
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2024-02-09 11:20:38 +03:00
47dcfa20f3
[ #895 ] test: Use t.Cleanup only for external resources
...
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2024-01-11 12:32:09 +00:00
47286ebf32
[ #805 ] pilorama: Fix TreeDrop
...
* If treeID is empty then deleting buckets for cursor may get
invalidated. So, buckets should be gathered before deleting.
Signed-off-by: Airat Arifullin <a.arifullin@yadro.com>
2023-11-17 10:21:35 +00:00
79088baa06
[ #772 ] node: Apply gofumpt
...
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2023-10-31 17:03:03 +03:00
8a81af5a3b
[ #653 ] Add context parameter to Open functions
...
DCO action / DCO (pull_request) Successful in 1m38s
Build / Build Components (1.20) (pull_request) Successful in 4m22s
Build / Build Components (1.21) (pull_request) Successful in 4m25s
Vulncheck / Vulncheck (pull_request) Successful in 4m56s
Tests and linters / Lint (pull_request) Successful in 6m1s
Tests and linters / Tests (1.20) (pull_request) Successful in 7m43s
Tests and linters / Staticcheck (pull_request) Successful in 8m1s
Tests and linters / Tests (1.21) (pull_request) Successful in 8m14s
Tests and linters / Tests with -race (pull_request) Successful in 8m32s
Signed-off-by: Ekaterina Lebedeva <ekaterina.lebedeva@yadro.com>
2023-09-07 18:03:29 +03:00
4d9a6c07fb
[ #618 ] core: Replace fmt.Sprintf with strconv.FormatUint
...
Signed-off-by: Alexander Chuprov <a.chuprov@yadro.com>
2023-08-21 07:14:50 +00:00
a8de37c8a2
[ #607 ] *: Remove redundant if on error returns
...
Semantic patch:
```
@@
@@
-if err != nil { return err }
-return nil
+return err
```
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
2023-08-17 16:50:02 +00:00
5335e7089e
[ #615 ] pilorama: Speedup TestForest_ApplyRandom()
...
Some of our pilorama tests fail on CI.
The reasons are not obvious, but one possible improvement
is using `WithNoSync` option for these. It should have much effect,
because we are writing on the tmpfs, but doesn't hurt anyway.
If I replace `t.TempDir()` with a local directory, test execution time
goes down from 5s (sync) to 0.4s (nosync), which is the same time as
with `t.TempDir()`. Maybe we have some strange CI configuration.
```
panic: test timed out after 10m0s
running tests:
TestForest_ApplyRandom (8m22s)
TestForest_ApplyRandom/bbolt (8m21s)
...
goroutine 170 [syscall]:
syscall.Syscall(0xc000100000?, 0xc00047b758?, 0x6aff9a?, 0xc00041c1b0?)
/opt/hostedtoolcache/go/1.20.7/x64/src/syscall/syscall_linux.go:69 +0x27
syscall.Fdatasync(0x9e35c0?)
/opt/hostedtoolcache/go/1.20.7/x64/src/syscall/zsyscall_linux_amd64.go:418 +0x2a
go.etcd.io/bbolt.fdatasync(0xc000189000?)
```
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
2023-08-16 19:09:08 +00:00
ae8be495c8
[#xx] Avoid manual management of files in tests
...
Vulncheck / Vulncheck (pull_request) Successful in 2m36s
Build / Build Components (1.21) (pull_request) Successful in 3m33s
DCO action / DCO (pull_request) Successful in 3m33s
Tests and linters / Staticcheck (pull_request) Successful in 4m15s
Tests and linters / Lint (pull_request) Successful in 5m31s
Build / Build Components (1.20) (pull_request) Successful in 7m2s
Tests and linters / Tests with -race (pull_request) Failing after 8m51s
Tests and linters / Tests (1.20) (pull_request) Successful in 9m55s
Tests and linters / Tests (1.21) (pull_request) Successful in 10m6s
Signed-off-by: Alejandro Lopez <a.lopez@yadro.com>
2023-08-14 14:01:39 +03:00
d641cba2fc
[ #587 ] Do not use math/rand.Read
...
Build / Build Components (1.20) (pull_request) Failing after 3s
Build / Build Components (1.21) (pull_request) Failing after 3s
Tests and linters / Lint (pull_request) Failing after 3s
Tests and linters / Tests (1.20) (pull_request) Failing after 3s
Tests and linters / Tests (1.21) (pull_request) Failing after 3s
Tests and linters / Tests with -race (pull_request) Failing after 5s
Tests and linters / Staticcheck (pull_request) Failing after 8s
Vulncheck / Vulncheck (pull_request) Failing after 2s
Fix staticcheck warnings after go1.20 update.
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
2023-08-09 16:02:44 +03:00
af82c2865e
[ #335 ] treesvc: Fix inmemory unit tests and nil meta items
...
Bolt forest saves empty slice of items. Now inmemory forest
does it the same way.
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2023-07-20 10:14:10 +03:00
b4e72a2dfd
[ #335 ] treesvc: Sort nodes by Filename in GetSubTree
...
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2023-07-20 10:14:10 +03:00
4bf345225c
[ #447 ] pilorama: Use named constant for the key size
...
ci/woodpecker/push/pre-commit Pipeline was successful
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
2023-06-26 07:42:05 +00:00
b4ce0b0412
[ #447 ] pilorama: Do not undo log for create ops
...
```
goos: linux
goarch: amd64
cpu: 11th Gen Intel(R) Core(TM) i5-1135G7 @ 2.40GHz
│ old │ new │
│ sec/op │ sec/op vs base │
Create-8 36.48µ ± 11% 30.34µ ± 14% -16.84% (p=0.000 n=10)
│ old │ new │
│ B/op │ B/op vs base │
Create-8 43.01Ki ± 4% 37.78Ki ± 5% -12.15% (p=0.000 n=10)
│ old │ new │
│ allocs/op │ allocs/op vs base │
Create-8 166.0 ± 3% 146.0 ± 3% -12.05% (p=0.000 n=10)
```
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
2023-06-26 07:42:05 +00:00
dd3874eff1
[ #447 ] pilorama: Add benchmark for create ops
...
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
2023-06-26 07:42:05 +00:00
d8ecc69d00
[ #373 ] local storage: Pass parent ID
...
This is required to add shard ID as metric label.
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2023-06-21 15:13:26 +03:00
d5aaec1107
[ #373 ] pilorama: Add metrics
...
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2023-06-21 15:13:26 +03:00
fe01781811
[ #446 ] los: Wrap SSD errors in a separate type
...
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
2023-06-16 14:53:31 +03:00
2541d319de
[ #266 ] pilorama: Allow to get current tree height
...
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2023-06-13 10:00:45 +00:00
74578052f9
[ #412 ] node: Replace tracing package
...
Use observability module.
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2023-06-01 13:23:11 +00:00
f2e5dead7e
[ #398 ] pilorama: Disallow applying same operations
...
ci/woodpecker/push/pre-commit Pipeline was successful
1. In redo() we save the old state.
2. If we do redo() for the same operation twice, the old state will be
overritten with the new one.
3. This in turn affects undo() and subsequent isAncestor() check.
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
2023-05-26 12:14:29 +00:00
973af12854
[ #327 ] tests: replace os.MkdirTemp with t.TempDir
...
ci/woodpecker/push/pre-commit Pipeline was successful
Signed-off-by: Alejandro Lopez <a.lopez@yadro.com>
2023-05-05 11:24:51 +00:00
58f1ba4b51
[ #288 ] pilorama: Add missing operation in log
...
ci/woodpecker/push/pre-commit Pipeline was successful
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
2023-04-28 07:56:20 +00:00
daa26f6e9b
[ #288 ] pilorama/test: Check operation order for TreeGetByPath()
...
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
2023-04-28 07:56:20 +00:00
291f9e809a
[ #288 ] pilorama: Remove getMeta() wrapper
...
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
2023-04-28 07:56:20 +00:00
0045f1bcd4
[ #288 ] pilorama: Use more descriptive names for memory tree
...
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
2023-04-28 07:56:20 +00:00
f856ad7480
[ #288 ] pilorama: Remove childMap from memory forest
...
Memory forest is here to check the correctness of boltdb optimized
implementation. Let's keep it simple.
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
2023-04-28 07:56:20 +00:00
6121b541b5
[ #242 ] treesvc: Add tracing spans
...
ci/woodpecker/push/pre-commit Pipeline was successful
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2023-04-14 10:25:53 +00:00
f32f61df87
[ #203 ] pilorama: Refactor tests
...
Do not pass 0 as channel capacity.
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2023-04-06 16:33:36 +03:00
bab11492ad
[ #203 ] node: Resolve never used errors
...
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2023-04-06 16:33:36 +03:00
9e2df4b7c7
[ #203 ] node: Fix double imports
...
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
2023-04-06 16:33:36 +03:00
341fe1688f
[ #139 ] test: Add test storage implementation
...
ci/woodpecker/push/pre-commit Pipeline was successful
This aims to reduce the usage of chmod hackery to induce or simulate
OS-related failures.
Signed-off-by: Alejandro Lopez <a.lopez@yadro.com>
2023-03-29 14:28:49 +00:00
47e8c5bf23
[ #156 ] pilorama: Remove CIDDescriptor from TreeApply()
...
Initially it was there to check whether an update is being initiated by
a proper node. It is now obsolete for 2 reasons:
1. Background synchronization fetches all operations from a single node.
2. There are a lot more problems with trust in the tree service, it is
only used in controlled environments.
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
2023-03-22 07:14:18 +00:00
3e6fd4c611
[ #82 ] pilorama: Allow to store last sync height
...
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
2023-03-13 11:25:44 +00:00
