In case of session token (ST) with object IDs search should
return only objects allowed in static session
Signed-off-by: Dmitrii Stepanov <d.stepanov@yadro.com>
This reverts commit 2567f8020e. It assumes
that assembling logic could break some failover scenarios if request
forwarding is done. However, it also breaks requesting big objects via a
non-container node with TTL=2. Failover has been rechecked without that
commit and no problems were found. Any (if found) other bugs related to
the forwarding and object assembling must be solved more carefully.
Signed-off-by: Pavel Karpy <p.karpy@yadro.com>
Allow replication of any (expired too) locked object. Information about
object locking is considered to be presented on the _container nodes_.
Signed-off-by: Pavel Karpy <p.karpy@yadro.com>
Previously a token could've expired in the middle of an object.PUT
stream, leading to upload being interrupted. This is bad, because user
doesn't always now what is the right values for the session token
lifetime. More than that, setting it to a very high value will
eventually blow up the session token database.
In this commit we read the session token once and reuse it for the whole
stream duration.
Signed-off-by: Evgenii Stratonikov <e.stratonikov@yadro.com>
`GETRANGEHASH` request spawns `GETRANGE` requests if an object could not be
found locally. If the original request contains session, it can be static
and, therefore, fetching session key can not be performed successfully.
As the best effort a node could request object's range with its own key.
Signed-off-by: Pavel Karpy <p.karpy@yadro.com>
Stop child objects collection if the last returned object (the most "left"
object in the collected chain) starts exactly from the `GETRANGE`'s `from`
value.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
That could happen if a node forwards request to a node that closed the
connection during the original object stream.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
A container node is expected to have full "get" access to assemble the
object.
A non-container node is expected to forward any request to a container node.
Any token is expected to be issued for an original request sender not for a
node so any new request is invalid by design with that token.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Do not lose meta information of the original requests: cache session and
bearer tokens of the original request b/w a new generated ones. Middle
request wrappers should not contain any meta information, since it is
useless (e.g. ACL service checks only the original tokens).
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
After presenting request statuses on the API level, all the errors are
unwrapped before sending to the caller side. It led to a losing invalid
request's context.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Do not use node's local storage if it is clear that an object will be
removed anyway as a redundant. It requires moving the changing local storage
logic from the validation step to the local target implementation.
It allows performing any relations checks (e.g. object locking) only if a
node is considered as a valid container member and is expected to store
(stored previously) all the helper objects (e.g. `LOCK`, `TOMBSTONE`, etc).
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Storage node should not provide NeoFS Object API service when it is
under maintenance.
Declare `Common` service that unifies behavior of all object operations.
The implementation pre-checks if node is under maintenance and returns
`apistatus.NodeUnderMaintenance` if so. Use `Common` service as a first
logical processor in object service pipeline.
Signed-off-by: Leonard Lyubich <ctulhurider@gmail.com>
In some scenarios original session can be unrelated to the objects which
are read internally by the node. For example, node requests child
objects when removing the parent one.
Tune internal NeoFS API client used by node's Object API server to
ignore unrelated sessions in `GetObject` / `HeadObject` / `PayloadRange`
ops.
Signed-off-by: Leonard Lyubich <ctulhurider@gmail.com>
Make it store its internal `zap.Logger`'s level. Also, make all the
components to accept internal `logger.Logger` instead of `zap.Logger`; it
will simplify future refactor.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Current spec allows denying GET_RANGE requests from other storage nodes.
However, GET should always be allowed and it is enough to perform
GET_RANGE locally
Signed-off-by: Evgenii Stratonikov <evgeniy@morphbits.ru>
In previous implementation `ObjectService.Get` RPC handler failed with
`parent address in child object differs` while assembling the "big"
object. This was caused by the child check which required parent
reference to be set in all child objects. The check was impracticable
because not all elements of the split-chain have a link to the parent.
Make `execCtx.isChild` to return `true` if parameterized object has no
parent header in its own header.
Signed-off-by: Leonard Lyubich <ctulhurider@gmail.com>
It doesn't make sense to check object relation in session check of
`ObjectService.Put` RPC which has been spawned by `ObjectService.Delete`
with session. Session issuer can't predict identifier of the tombstone
object to be created.
Signed-off-by: Leonard Lyubich <ctulhurider@gmail.com>
In previous implementation of `neofs-node` app object session was not
checked for substitution of the object related to it. Also, for access
checks, the session object was substituted instead of the one from the
request. This, on the one hand, made it possible to inherit the session
from the parent object for authorization for certain actions. On the
other hand, it covered the mentioned object substitution, which is a
critical vulnerability.
Next changes are applied to processing of all Object service requests:
- check if object session relates to the requested object
- use requested object in access checks.
Disclosed problem of object context inheritance will be solved within
Signed-off-by: Leonard Lyubich <ctulhurider@gmail.com>
In previous implementation node blocked any operation of local object
storage in maintenance mode. There is a need to perform some storage
operations like data evacuation or restoration.
Do not call block storage engine in maintenance mode. Make all Object
service operations to return `apistatus.NodeUnderMaintenance` error from
each local op.
Signed-off-by: Leonard Lyubich <ctulhurider@gmail.com>
Also, try to fetch object header info from the local storage to find as much
object info as possible for the requests which do not assume returning
object header as a response.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Replace `ErrRangeOutOfBounds` error from `pkg/core/object` package with
`ObjectOutOfRange` from `apistatus` package. That error is returned by
storage node's server as NeoFS API statuses.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Do not calculate and do not write homomorphic hash for containers that were
configured to store objects without hash.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
If the container ID is not nil and not equal to the container ID in the
request, consider bearer token invalid.
See also nspcc-dev/neofs-api#207.
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Allocate memory only if a node chosen as the forwarded request receiver
has responded with a successful status.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
After fixing version fields in forwarded requests, a node does not check
statuses since errors are not covered by direct call error checks.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Forwarded requests contained zero version in their meta header. It did not
allow responding with API statuses (`v0.0` version considered to be older
than `v2.11`) to the forwarding node and, therefore, did not allow analyzing
responses.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
After recent changes in NeoFS SDK Go library session tokens aren't
embedded into `container.Container` and `eacl.Table` structures.
Group value, session token and signature in a structure for container
and eACL.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Node shouldn't perform eACL verification during GET/HEAD request
processing until full object header is received. Otherwise, for some
eACL tables request may be falsely rejected.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Scenario:
* HEAD request of some object
* 1st eACL record allows op for objects with specific user attribute
* 2nd eACL record forbids op by object ID
* node doesn't store the requested object locally
With this scenario node shouldn't deny request.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
It is redundant to process object headers in responses w/o object field
since result will be the same.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Request processing should not be interrupted in case of local storage
failure since error case in normal for relay nodes.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
ACL service should not deny request on local storage failure since in
this case relay nodes won't be able to continue the operation.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Core changes:
* avoid package-colliding variable naming
* avoid using pointers to IDs where unnecessary
* avoid using `idSDK` import alias pattern
* use `EncodeToString` for protocol string calculation and `String` for
printing
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Not all the NeoFS requests must contain OID in their bodies (or must NOT
contain them at all). Do not pass object address in helper functions, pass
CID and OID separately instead.
Also, fixed NPE in the ACL service: updated SDK library brought errors
when working with `Put` and `Search` requests without OID fields.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Parse all headers beforehand and reject invalid requests.
Another approach would be to remember the error and check
it after `CalculateAction`, which is a bit faster.
The rule of thumb here is "first validate, then use".
Signed-off-by: Evgenii Stratonikov <evgeniy@nspcc.ru>
Move in-memory session storage to the separate directory of `storage`. It is
done for future support of different kind of session storages.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Return `apistatus.ObjectAccessDenied` error on access violation from ACL
service. Write reason in format of the errors from the previous
implementation. These errors are returned by storage node's server as
NeoFS API statuses.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Replace `core/container.ErrNotFound` error returned by `Source.Get`
interface method with `apistatus.ContainerNotFound` status error. This
error is returned by storage node's server as NeoFS API statuses.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Replace `ErrNotFound`/`ErrAlreadyRemoved` error from
`pkg/core/object` package with `ObjectNotFound`/`ObjectAlreadyRemoved`
one from `apistatus` package. These errors are returned by storage
node's server as NeoFS API statuses.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Return `SessionTokenExpired`/`SessionTokenNotFound` error from
`apistatus` package if private session token is expired/missing. These
errors are returned by storage node's server as NeoFS API statuses.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
After `putsvc.Service` started to support additional container broadcast
of the saved objects there is no more need to perform broadcast of
tombstone object in `deletesvc.Service`.
Make `putsvc.Service` to perform additional broadcast of `TOMBSTONE`
objects. Remove `broadcastTombstone` stage from `deletesvc.execCtx`,
from now it is encapsulated in `saveTombstone` stage. Remove no longer
needed `putsvc.PutInitPrm.WithTraverseOption` method.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There are several cases when we need to spread the object around the
container after its primary placement (e.g. objects of type TOMBSTONE).
It'd be convenient to support this feature in `putsvc.Service`.
Add additional stage of container broadcast after the object is stored.
This stage is carried out no more than once and does not affect the
outcome of the main PUT operation.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make all operations that related to `neofs-api-go` library be placed in `v2`
packages. They parse all v2-versioned structs info `neofs-sdk-go`
abstractions and pass them to the corresponding `acl`/`eacl` packages. `v2`
packages are the only packages that do import `neofs-api-go` library. `eacl`
and `acl` provide public functions that only accepts `sdk` structures.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Remove `Object` and `RawObject` types from `pkg/core/object` package.
Use `Object` type from NeoFS SDK Go library everywhere. Avoid using the
deprecated elements.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
- Update `neofs-sdk-go`:
v0.0.0-20211230072947-1fe37df88f80 => v0.0.0-20220113123743-7f3162110659
- Add client interface that duplicates SDK's client behaviour and new
`MultiAddressClient` interface that has method that iterates over wrapped
clients.
- Also start using simple client mode that does not require parsing statuses
outside the SDK library.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Reverse payload overtake triggers direct payload overtake that
sets status and error. We should not override that.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
In previous implementation `Search` method of transport splitter skipped
responses with empty ID list.
Replace while-loop with do-while one in `TransportSplitter.Search`
method implementation in order to send responses with empty result too.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Upgrade NeoFS API Go library to version with status returns. Make all API
clients to pull out and return errors from failed statuses. Make signature
service to respond with status if client version supports it.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
All objects in NeoFS must have owner ID. In previous implementation Object
Delete service handler set owner ID from request session token. If removal
was executed w/o a session, object with tombstone was prepared incorrectly.
In order to fix this node should set its own ID and become an owner of the
tombstone object.
Extend `NetworkInfo` interface required by Object.Delete handler with
`LocalNodeID` method which returns `owner.ID` of the local node. Implement
the method on `networkState` component of storage node application which is
updated on each node state change in NeoFS network map. Set owner returned
by `LocalNodeID` call as tombstone object's owner in Delete handler.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation node returns "access denied" on Object.Put with
object with unset owner. Although object owner must be set, its absence
should not be considered as access error. The same applies to sender key.
Check owner ID and public key emptiness only if sticky bit is set.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
The client needs of the Object service are limited and change not often.
Interface changes of the client library should not affect the operation of
various service packages, if they do not change their requirements for
the provided functionality. To localize the use of the base client and
facilitate further support, an auxiliary package is implemented that will
only be used by the Object service.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There is no point to pass key storage in parameters because
it can be defined on the service level of application.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
`CommonPrm` structure has private key for remote operations.
It obtained in the beginning of request processing. However,
not every operation triggers remote calls. Therefore, key
might not be used. It is important to avoid early key fetching
because `TokenStore` now returns error if session token does not
exist. This is valid case when container nodes receive request with
session token (for ACL pass) and they should process request locally.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
This is invalid operation for storage nodes that receive part of split
object. While object is signed by session token, the message itself
should be signed by the node key.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
After storage engine started to limit number of PUT operations there is no
need to limited worker pool in Object Put service.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Session token can be present in both object header and
request meta header. They are the same during initial object
placement.
At the object replication, storage node puts object without
any session tokens attached to the request. If container's eACL
denies object.Put for USER role (use bearer to upload), then
replication might fail on objects with session tokens of the
signed by container owner. It is incorrect, so use session
token directly from request meta header.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
There is a need to check if public key in the RPC response matches the
public key of the related storage node declared in network map.
Define `ErrWrongPublicKey` error. Implement RPC response handler's
constructor `AssertKeyResponseCallback` which checks public key. Construct
handler and pass it to client's option `WithResponseInfoHandler`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There is a need to have the ability to expand the data needed for client
construction.
Replace `network.AddressGroup` parameter of client cache interfaces with
`client.NodeInfo`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation Object PUT used single pool of workers for local
and remote ops, but these ops are heterogeneous.
Use remote/local pool for remote/local operations in PUT service. At first
the pools are configured with the same size.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation `distributedTarget` didn't check if next node is
local. This check was performed by the handlers (target initializer and
relay func).
Make `distributedTarget` to calculate node's locality. Pass locality flag to
the handlers.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Forwarding mechanism resends original request. During split object chain traversal,
storage node performs multiple `object.Head` requests on each child. If request
forwarding happens, then `object.Head` returns object ID of the original request.
This produces infinite assembly loop.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Make `errIncompletePut` to be a structure which wraps single client error.
Wrap error of the last client into `errIncompletePut` during placement
execution.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation Object service's handler returned const error in
case of failure (full or partial) of PUT operation. This did not even allow
us to roughly guess what the reason is. Not as a complete solution, but to
alleviate some cases where all nodes in a container return the same error,
it is suggested to return the error of the last server that responded.
Return latest server error from placement loop of `iteratePlacement` method
of `distributedTarget` type.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation sticky bit could disrupt access of container
nodes to replication. According to NeoFS specification sticky bit should not
affect the requests sent by nodes from SYSTEM group.
Add role check to `stickyBitCheck`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Some software components regulate the way of working with placement arrays
when a local node enters it. In the previous implementation, the locality
criterion was the correspondence between the announced network address
(group) and the address with which the node was configured. However, by
design, network addresses are not unique identifiers of storage nodes in the
system.
Change comparisons by network addresses to comparisons by keys in all
packages with the logic described above. Implement `netmap.AnnouncedKeys`
interface on `cfg` type in the storage node application.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation `placement.Traverser.Next` method returned slice
of `network.AddressGroup` elements. There is a need to process keys of
storage nodes besides network addresses for intra-container communication.
Wrap `network.AddressGroup` in a new type `placement.Node` that summarizes
the storage node information required for communication. Return slice of
`Node` instances from `Traverser.Next` method. Fix compilation breaks in
dependent packages.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Do not init caches for eACL, containers and netmap
if `disable_cache` config options is `true`, use
direct RPC calls instead.
Signed-off-by: Pavel Karpy <carpawell@nspcc.ru>
Make placement `Traverser.Next` method to return ``[]network.AddressGroup`
in order to support multiple addresses of the storeage nodes.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make Object Head service to work with `AddressGroup` instead of `Address`
in order to support multiple addresses of the storage node.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make Object Search service to work with `AddressGroup` instead of `Address`
in order to support multiple addresses of the storage node.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make Object Get service to work with `AddressGroup` instead of `Address` in
order to support multiple addresses of the storage node.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make Object Put service to work with `AddressGroup` instead of `Address` in
order to support multiple addresses of the storage node.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Make `LocalAddressSource.LocalAddress` method to return `AddressGroup`. Make
`IsLocalAddress` function to accept parameter of type `AddressGroup`. Adopt
the application code with temporary `GroupFromAddress` helper.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
There is a need to generalize single-address client to group-address client.
To do this, we can re-implement `Client` interface from NeoFS API Go library
and still use it in the application code. There is a problem with method
`Raw` which must return single-address raw client. So as not to make changes
to API library we need to overload Client interface in order to support
`Raw` method in group-address client implementation.
Define `Client` interface in new `pkg/core/client` package. Completely
inherit API `Client` interface. Add `RawForAddress` method to build raw
client for the single node address. Adopt the application code that used Raw
method to work with new `Client`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
`network.Address` structure in most cases created once and used read-only.
Replace `AddressFromString` function with `Address.FromString` method with
the same purpose and implementation. Make all libraries to work with value.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Return tyype is clear from the method's signature and docs, there is no
point in reflecting it in the name.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Panic if internal `manet.DialArgs` call returns error since this is
unexpected according to `AddressFromString` implementation.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
NeoFS network dictates the limitation of the maximum size of the "finished"
objects. The payload size of an object is recorded in its header. When
writing finished objects, the nodes must check:
* satisfying the constraint;
* matching the value in the header to the number of payload bytes.
Provide value returned by `MaxSizeSource` component to `validatingTarget`.
Check max size value during the stream of the "finished" objects. Check
header value during the streaming and on-close. Check payload size in v2
relay scenario.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
As it explained in previous commit, session token also should
be presented in original meta header but can be omitted in higher
layers.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Request meta headers are organized in a layers, where
upper layers re-sign down layers. Bearer token should be
a part of original meta header and it can be omitted in
upper layers. Therefore we need to traverse over linked list
of meta header to the original meta header to get bearer token.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Request forwarding callback should be called only if set since it is an
optional parameter.
Call `forwarder` function only if it is non-nil.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Request forwarding callback should be called only if set since it is an
optional parameter. In GetRangeHash forwarder is never set.
Call `forwarder` function only if it is non-nil. Remove no longer needed
`hashOnly` option.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
Wrap functions at `pkg/errors` return nil if error argument
was nil. fmt.Errorf always returns error so we need to add
missing error checks to the code.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
In current implementation `Object.GetRangeHash` RPC handler forwards range
requests for payload data. Missing request forwarder of the original request
caused NPE during execution.
Do not call request forwarder if payload range hash is requested.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
To enable TLS support we can't operate with IP addresses directly.
Certificates are issued with host names so it is required to
pass them into RPC client. DNS resolving should be done by transport
layer and not be a part of node. Therefore `IPAddrString` usage is
removed from code.
Signed-off-by: Alex Vanin <alexey@nspcc.ru>
Allocate capacity instead of length of the slice to write the object payload
range since each chunk is written through `append`.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
In previous implementation node's Object Get/Head/GetRange V2 service
handlers created a new request for each RPC. Now original requests are
re-signed according to API specification. Logical handler abstracts from
this version-dependent logic through `RequestForwarder` callback.
Signed-off-by: Leonard Lyubich <leonard@nspcc.ru>
